提交 9bcc8606 编写于 作者: S Shaker Daibes 提交者: David S. Miller

net/mlx5e: Add CQE compression user control

The user can now override the automatic driver decision using the
rx_cqe_compress flag, which is the preference for CQE compression.
The flag is initialized with the automatic driver decision.
Signed-off-by: NShaker Daibes <shakerd@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 59ece1c9
......@@ -171,10 +171,12 @@ extern const char mlx5e_self_tests[][ETH_GSTRING_LEN];
static const char mlx5e_priv_flags[][ETH_GSTRING_LEN] = {
"rx_cqe_moder",
"rx_cqe_compress",
};
enum mlx5e_priv_flag {
MLX5E_PFLAG_RX_CQE_BASED_MODER = (1 << 0),
MLX5E_PFLAG_RX_CQE_COMPRESS = (1 << 1),
};
#define MLX5E_SET_PFLAG(priv, pflag, enable) \
......@@ -205,8 +207,7 @@ struct mlx5e_params {
u16 num_channels;
u8 num_tc;
u8 rx_cq_period_mode;
bool rx_cqe_compress_admin;
bool rx_cqe_compress;
bool rx_cqe_compress_def;
struct mlx5e_cq_moder rx_cq_moderation;
struct mlx5e_cq_moder tx_cq_moderation;
u16 min_rx_wqes;
......
......@@ -94,7 +94,7 @@ int mlx5e_hwstamp_set(struct net_device *dev, struct ifreq *ifr)
switch (config.rx_filter) {
case HWTSTAMP_FILTER_NONE:
/* Reset CQE compression to Admin default */
mlx5e_modify_rx_cqe_compression(priv, priv->params.rx_cqe_compress_admin);
mlx5e_modify_rx_cqe_compression(priv, priv->params.rx_cqe_compress_def);
break;
case HWTSTAMP_FILTER_ALL:
case HWTSTAMP_FILTER_SOME:
......@@ -111,6 +111,7 @@ int mlx5e_hwstamp_set(struct net_device *dev, struct ifreq *ifr)
case HWTSTAMP_FILTER_PTP_V2_SYNC:
case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
/* Disable CQE compression */
netdev_warn(dev, "Disabling cqe compression");
mlx5e_modify_rx_cqe_compression(priv, false);
config.rx_filter = HWTSTAMP_FILTER_ALL;
break;
......
......@@ -1481,6 +1481,35 @@ static int set_pflag_rx_cqe_based_moder(struct net_device *netdev, bool enable)
return err;
}
static int set_pflag_rx_cqe_compress(struct net_device *netdev,
bool enable)
{
struct mlx5e_priv *priv = netdev_priv(netdev);
struct mlx5_core_dev *mdev = priv->mdev;
int err = 0;
bool reset;
if (!MLX5_CAP_GEN(mdev, cqe_compression))
return -ENOTSUPP;
if (enable && priv->tstamp.hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE) {
netdev_err(netdev, "Can't enable cqe compression while timestamping is enabled.\n");
return -EINVAL;
}
reset = test_bit(MLX5E_STATE_OPENED, &priv->state);
if (reset)
mlx5e_close_locked(netdev);
MLX5E_SET_PFLAG(priv, MLX5E_PFLAG_RX_CQE_COMPRESS, enable);
priv->params.rx_cqe_compress_def = enable;
if (reset)
err = mlx5e_open_locked(netdev);
return err;
}
static int mlx5e_handle_pflag(struct net_device *netdev,
u32 wanted_flags,
enum mlx5e_priv_flag flag,
......@@ -1511,13 +1540,19 @@ static int mlx5e_set_priv_flags(struct net_device *netdev, u32 pflags)
int err;
mutex_lock(&priv->state_lock);
err = mlx5e_handle_pflag(netdev, pflags,
MLX5E_PFLAG_RX_CQE_BASED_MODER,
set_pflag_rx_cqe_based_moder);
if (err)
goto out;
err = mlx5e_handle_pflag(netdev, pflags,
MLX5E_PFLAG_RX_CQE_COMPRESS,
set_pflag_rx_cqe_compress);
out:
mutex_unlock(&priv->state_lock);
return err ? -EINVAL : 0;
return err;
}
static u32 mlx5e_get_priv_flags(struct net_device *netdev)
......
......@@ -84,7 +84,8 @@ static void mlx5e_set_rq_type_params(struct mlx5e_priv *priv, u8 rq_type)
switch (priv->params.rq_wq_type) {
case MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ:
priv->params.log_rq_size = MLX5E_PARAMS_DEFAULT_LOG_RQ_SIZE_MPW;
priv->params.mpwqe_log_stride_sz = priv->params.rx_cqe_compress ?
priv->params.mpwqe_log_stride_sz =
MLX5E_GET_PFLAG(priv, MLX5E_PFLAG_RX_CQE_COMPRESS) ?
MLX5_MPWRQ_LOG_STRIDE_SIZE_CQE_COMPRESS :
MLX5_MPWRQ_LOG_STRIDE_SIZE;
priv->params.mpwqe_log_num_strides = MLX5_MPWRQ_LOG_WQE_SZ -
......@@ -101,7 +102,7 @@ static void mlx5e_set_rq_type_params(struct mlx5e_priv *priv, u8 rq_type)
priv->params.rq_wq_type == MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ,
BIT(priv->params.log_rq_size),
BIT(priv->params.mpwqe_log_stride_sz),
priv->params.rx_cqe_compress_admin);
MLX5E_GET_PFLAG(priv, MLX5E_PFLAG_RX_CQE_COMPRESS));
}
static void mlx5e_set_rq_priv_params(struct mlx5e_priv *priv)
......@@ -1664,7 +1665,7 @@ static void mlx5e_build_rx_cq_param(struct mlx5e_priv *priv,
}
MLX5_SET(cqc, cqc, log_cq_size, log_cq_size);
if (priv->params.rx_cqe_compress) {
if (MLX5E_GET_PFLAG(priv, MLX5E_PFLAG_RX_CQE_COMPRESS)) {
MLX5_SET(cqc, cqc, mini_cqe_res_format, MLX5_CQE_FORMAT_CSUM);
MLX5_SET(cqc, cqc, cqe_comp_en, 1);
}
......@@ -3447,17 +3448,16 @@ static void mlx5e_build_nic_netdev_priv(struct mlx5_core_dev *mdev,
priv->params.log_sq_size = MLX5E_PARAMS_DEFAULT_LOG_SQ_SIZE;
/* set CQE compression */
priv->params.rx_cqe_compress_admin = false;
priv->params.rx_cqe_compress_def = false;
if (MLX5_CAP_GEN(mdev, cqe_compression) &&
MLX5_CAP_GEN(mdev, vport_group_manager)) {
mlx5e_get_max_linkspeed(mdev, &link_speed);
mlx5e_get_pci_bw(mdev, &pci_bw);
mlx5_core_dbg(mdev, "Max link speed = %d, PCI BW = %d\n",
link_speed, pci_bw);
priv->params.rx_cqe_compress_admin =
priv->params.rx_cqe_compress_def =
cqe_compress_heuristic(link_speed, pci_bw);
}
priv->params.rx_cqe_compress = priv->params.rx_cqe_compress_admin;
mlx5e_set_rq_priv_params(priv);
if (priv->params.rq_wq_type == MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ)
......@@ -3490,6 +3490,7 @@ static void mlx5e_build_nic_netdev_priv(struct mlx5_core_dev *mdev,
/* Initialize pflags */
MLX5E_SET_PFLAG(priv, MLX5E_PFLAG_RX_CQE_BASED_MODER,
priv->params.rx_cq_period_mode == MLX5_CQ_PERIOD_MODE_START_FROM_CQE);
MLX5E_SET_PFLAG(priv, MLX5E_PFLAG_RX_CQE_COMPRESS, priv->params.rx_cqe_compress_def);
mutex_init(&priv->state_lock);
......
......@@ -164,14 +164,14 @@ void mlx5e_modify_rx_cqe_compression(struct mlx5e_priv *priv, bool val)
mutex_lock(&priv->state_lock);
if (priv->params.rx_cqe_compress == val)
if (MLX5E_GET_PFLAG(priv, MLX5E_PFLAG_RX_CQE_COMPRESS) == val)
goto unlock;
was_opened = test_bit(MLX5E_STATE_OPENED, &priv->state);
if (was_opened)
mlx5e_close_locked(priv->netdev);
priv->params.rx_cqe_compress = val;
MLX5E_SET_PFLAG(priv, MLX5E_PFLAG_RX_CQE_COMPRESS, val);
if (was_opened)
mlx5e_open_locked(priv->netdev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册