提交 9b244b5d 编写于 作者: D Dave Airlie

Merge branch 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox into drm-next

These are a number of fixes from the patch set which Jean-Francois has
been working on which I think are important to be merged during -rc, and
have been tested independently here.  I've been in discussion with Rob,
who is happy that I send these directly to you.

* 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox:
  drm/i2c: tda998x: fix the ENABLE_SPACE register
  drm/i2c: tda998x: set the PLL division factor in range 0..3
  drm/i2c: tda998x: force the page register at startup time
  drm/i2c: tda998x: free the CEC device on encoder_destroy
  drm/i2c: tda998x: check the CEC device creation
  drm/i2c: tda998x: fix bad value in the AIF
......@@ -208,7 +208,7 @@ struct tda998x_priv {
# define PLL_SERIAL_1_SRL_IZ(x) (((x) & 3) << 1)
# define PLL_SERIAL_1_SRL_MAN_IZ (1 << 6)
#define REG_PLL_SERIAL_2 REG(0x02, 0x01) /* read/write */
# define PLL_SERIAL_2_SRL_NOSC(x) (((x) & 3) << 0)
# define PLL_SERIAL_2_SRL_NOSC(x) ((x) << 0)
# define PLL_SERIAL_2_SRL_PR(x) (((x) & 0xf) << 4)
#define REG_PLL_SERIAL_3 REG(0x02, 0x02) /* read/write */
# define PLL_SERIAL_3_SRL_CCIR (1 << 0)
......@@ -528,10 +528,10 @@ tda998x_write_aif(struct drm_encoder *encoder, struct tda998x_encoder_params *p)
{
uint8_t buf[PB(5) + 1];
memset(buf, 0, sizeof(buf));
buf[HB(0)] = 0x84;
buf[HB(1)] = 0x01;
buf[HB(2)] = 10;
buf[PB(0)] = 0;
buf[PB(1)] = p->audio_frame[1] & 0x07; /* CC */
buf[PB(2)] = p->audio_frame[2] & 0x1c; /* SF */
buf[PB(4)] = p->audio_frame[4];
......@@ -824,6 +824,11 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
}
div = 148500 / mode->clock;
if (div != 0) {
div--;
if (div > 3)
div = 3;
}
/* mute the audio FIFO: */
reg_set(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
......@@ -913,7 +918,7 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
if (priv->rev == TDA19988) {
/* let incoming pixels fill the active space (if any) */
reg_write(encoder, REG_ENABLE_SPACE, 0x01);
reg_write(encoder, REG_ENABLE_SPACE, 0x00);
}
/* must be last register set: */
......@@ -1094,6 +1099,8 @@ tda998x_encoder_destroy(struct drm_encoder *encoder)
{
struct tda998x_priv *priv = to_tda998x_priv(encoder);
drm_i2c_encoder_destroy(encoder);
if (priv->cec)
i2c_unregister_device(priv->cec);
kfree(priv);
}
......@@ -1142,8 +1149,10 @@ tda998x_encoder_init(struct i2c_client *client,
priv->vip_cntrl_1 = VIP_CNTRL_1_SWAP_C(0) | VIP_CNTRL_1_SWAP_D(1);
priv->vip_cntrl_2 = VIP_CNTRL_2_SWAP_E(4) | VIP_CNTRL_2_SWAP_F(5);
priv->current_page = 0;
priv->current_page = 0xff;
priv->cec = i2c_new_dummy(client->adapter, 0x34);
if (!priv->cec)
return -ENODEV;
priv->dpms = DRM_MODE_DPMS_OFF;
encoder_slave->slave_priv = priv;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册