SERIAL: core: add throttle/unthrottle callbacks for hardware assisted flow control

Add two callbacks for hardware assisted flow control; we need to know
when the tty layers want us to stop and restart due to their buffer
levels.

Call a driver specific throttle/unthrottle function if and only if the
driver indicates that it is using an enabled hardware assisted flow
control method, otherwise fall back to the non-hardware assisted
methods.
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

drivers/tty/serial/serial_core.c

@@ -610,27 +610,50 @@ static void uart_send_xchar(struct tty_struct *tty, char ch)
 static void uart_throttle(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
+	struct uart_port *port = state->uart_port;
+	uint32_t mask = 0;
 
 	if (I_IXOFF(tty))
+		mask |= UPF_SOFT_FLOW;
+	if (tty->termios.c_cflag & CRTSCTS)
+		mask |= UPF_HARD_FLOW;
+
+	if (port->flags & mask) {
+		port->ops->throttle(port);
+		mask &= ~port->flags;
+	}
+
+	if (mask & UPF_SOFT_FLOW)
 		uart_send_xchar(tty, STOP_CHAR(tty));
 
-	if (tty->termios.c_cflag & CRTSCTS)
-		uart_clear_mctrl(state->uart_port, TIOCM_RTS);
+	if (mask & UPF_HARD_FLOW)
+		uart_clear_mctrl(port, TIOCM_RTS);
 }
 
 static void uart_unthrottle(struct tty_struct *tty)
 {
 	struct uart_state *state = tty->driver_data;
 	struct uart_port *port = state->uart_port;
+	uint32_t mask = 0;
 
-	if (I_IXOFF(tty)) {
+	if (I_IXOFF(tty))
+		mask |= UPF_SOFT_FLOW;
+	if (tty->termios.c_cflag & CRTSCTS)
+		mask |= UPF_HARD_FLOW;
+
+	if (port->flags & mask) {
+		port->ops->unthrottle(port);
+		mask &= ~port->flags;
+	}
+
+	if (mask & UPF_SOFT_FLOW) {
 		if (port->x_char)
 			port->x_char = 0;
 		else
 			uart_send_xchar(tty, START_CHAR(tty));
 	}
 
-	if (tty->termios.c_cflag & CRTSCTS)
+	if (mask & UPF_HARD_FLOW)
 		uart_set_mctrl(port, TIOCM_RTS);
 }
 

include/linux/serial_core.h

@@ -46,6 +46,8 @@ struct uart_ops {
 	unsigned int	(*get_mctrl)(struct uart_port *);
 	void		(*stop_tx)(struct uart_port *);
 	void		(*start_tx)(struct uart_port *);
+	void		(*throttle)(struct uart_port *);
+	void		(*unthrottle)(struct uart_port *);
 	void		(*send_xchar)(struct uart_port *, char ch);
 	void		(*stop_rx)(struct uart_port *);
 	void		(*enable_ms)(struct uart_port *);