video: exynos_dp: Improve EDID error handling

EDID error handling has 2 problems:
 - It doesn't fail as early as it can
 - The retry counts for i2c and aux transactions are huge

This patch fails if the initial i2c transaction fails, and reduces the
aux and i2c retry counts down to 3.

[jg1.han@samsung.com: reduced the retry count of exynos_dp_read_byte_from_dpcd()]
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NJingoo Han <jg1.han@samsung.com>

drivers/video/exynos/exynos_dp_core.c

@@ -91,9 +91,11 @@ static int exynos_dp_read_edid(struct exynos_dp_device *dp)
 	 */
 
 	/* Read Extension Flag, Number of 128-byte EDID extension blocks */
-	exynos_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
+	retval = exynos_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR,
 				EDID_EXTENSION_FLAG,
 				&extend_block);
+	if (retval)
+		return retval;
 
 	if (extend_block > 0) {
 		dev_dbg(dp->dev, "EDID data includes a single extension!\n");
@@ -182,14 +184,15 @@ static int exynos_dp_handle_edid(struct exynos_dp_device *dp)
 	int retval;
 
 	/* Read DPCD DPCD_ADDR_DPCD_REV~RECEIVE_PORT1_CAP_1 */
-	exynos_dp_read_bytes_from_dpcd(dp,
-		DPCD_ADDR_DPCD_REV,
-		12, buf);
+	retval = exynos_dp_read_bytes_from_dpcd(dp, DPCD_ADDR_DPCD_REV,
+				12, buf);
+	if (retval)
+		return retval;
 
 	/* Read EDID */
 	for (i = 0; i < 3; i++) {
 		retval = exynos_dp_read_edid(dp);
-		if (retval == 0)
+		if (!retval)
 			break;
 	}
 

drivers/video/exynos/exynos_dp_reg.c

@@ -491,7 +491,7 @@ int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
 	int i;
 	int retval;
 
-	for (i = 0; i < 10; i++) {
+	for (i = 0; i < 3; i++) {
 		/* Clear AUX CH data buffer */
 		reg = BUF_CLR;
 		writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
@@ -552,7 +552,7 @@ int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
 		else
 			cur_data_count = count - start_offset;
 
-		for (i = 0; i < 10; i++) {
+		for (i = 0; i < 3; i++) {
 			/* Select DPCD device address */
 			reg = AUX_ADDR_7_0(reg_addr + start_offset);
 			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
@@ -617,7 +617,7 @@ int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
 			cur_data_count = count - start_offset;
 
 		/* AUX CH Request Transaction process */
-		for (i = 0; i < 10; i++) {
+		for (i = 0; i < 3; i++) {
 			/* Select DPCD device address */
 			reg = AUX_ADDR_7_0(reg_addr + start_offset);
 			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
@@ -700,17 +700,15 @@ int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
 	int i;
 	int retval;
 
-	for (i = 0; i < 10; i++) {
+	for (i = 0; i < 3; i++) {
 		/* Clear AUX CH data buffer */
 		reg = BUF_CLR;
 		writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
 
 		/* Select EDID device */
 		retval = exynos_dp_select_i2c_device(dp, device_addr, reg_addr);
-		if (retval != 0) {
-			dev_err(dp->dev, "Select EDID device fail!\n");
+		if (retval != 0)
 			continue;
-		}
 
 		/*
 		 * Set I2C transaction and read data
@@ -750,7 +748,7 @@ int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
 	int retval = 0;
 
 	for (i = 0; i < count; i += 16) {
-		for (j = 0; j < 100; j++) {
+		for (j = 0; j < 3; j++) {
 			/* Clear AUX CH data buffer */
 			reg = BUF_CLR;
 			writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);