提交 9928c7d1 编写于 作者: L Larry Finger 提交者: John W. Linville

rtlwifi: rtl8192de: Remove comparison of boolean with true

Tests of a boolean against "true" are not needed as non-zero is sufficient..
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 f2e795ff
...@@ -449,7 +449,7 @@ void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) ...@@ -449,7 +449,7 @@ void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
case HW_VAR_CORRECT_TSF: { case HW_VAR_CORRECT_TSF: {
u8 btype_ibss = ((u8 *) (val))[0]; u8 btype_ibss = ((u8 *) (val))[0];
if (btype_ibss == true) if (btype_ibss)
_rtl92de_stop_tx_beacon(hw); _rtl92de_stop_tx_beacon(hw);
_rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3)); _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3));
rtl_write_dword(rtlpriv, REG_TSFTR, rtl_write_dword(rtlpriv, REG_TSFTR,
...@@ -457,7 +457,7 @@ void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) ...@@ -457,7 +457,7 @@ void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
rtl_write_dword(rtlpriv, REG_TSFTR + 4, rtl_write_dword(rtlpriv, REG_TSFTR + 4,
(u32) ((mac->tsf >> 32) & 0xffffffff)); (u32) ((mac->tsf >> 32) & 0xffffffff));
_rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0); _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0);
if (btype_ibss == true) if (btype_ibss)
_rtl92de_resume_tx_beacon(hw); _rtl92de_resume_tx_beacon(hw);
break; break;
...@@ -1142,7 +1142,7 @@ void rtl92de_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid) ...@@ -1142,7 +1142,7 @@ void rtl92de_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid)
if (rtlpriv->psc.rfpwr_state != ERFON) if (rtlpriv->psc.rfpwr_state != ERFON)
return; return;
if (check_bssid == true) { if (check_bssid) {
reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN); reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr)); rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&reg_rcr));
_rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4)); _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4));
...@@ -1785,7 +1785,7 @@ static void _rtl92de_read_adapter_info(struct ieee80211_hw *hw) ...@@ -1785,7 +1785,7 @@ static void _rtl92de_read_adapter_info(struct ieee80211_hw *hw)
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n")); RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
rtlefuse->autoload_failflag = false; rtlefuse->autoload_failflag = false;
} }
if (rtlefuse->autoload_failflag == true) { if (rtlefuse->autoload_failflag) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("RTL819X Not boot from eeprom, check it !!")); ("RTL819X Not boot from eeprom, check it !!"));
return; return;
...@@ -2147,7 +2147,7 @@ bool rtl92de_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid) ...@@ -2147,7 +2147,7 @@ bool rtl92de_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid)
REG_MAC_PINMUX_CFG) & ~(BIT(3))); REG_MAC_PINMUX_CFG) & ~(BIT(3)));
u1tmp = rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL); u1tmp = rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL);
e_rfpowerstate_toset = (u1tmp & BIT(3)) ? ERFON : ERFOFF; e_rfpowerstate_toset = (u1tmp & BIT(3)) ? ERFON : ERFOFF;
if ((ppsc->hwradiooff == true) && (e_rfpowerstate_toset == ERFON)) { if (ppsc->hwradiooff && (e_rfpowerstate_toset == ERFON)) {
RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
("GPIOChangeRF - HW Radio ON, RF ON\n")); ("GPIOChangeRF - HW Radio ON, RF ON\n"));
e_rfpowerstate_toset = ERFON; e_rfpowerstate_toset = ERFON;
......
...@@ -93,7 +93,7 @@ void rtl92de_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled) ...@@ -93,7 +93,7 @@ void rtl92de_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
break; break;
case LED_PIN_LED0: case LED_PIN_LED0:
ledcfg &= 0xf0; ledcfg &= 0xf0;
if (pcipriv->ledctl.led_opendrain == true) if (pcipriv->ledctl.led_opendrain)
rtl_write_byte(rtlpriv, REG_LEDCFG2, rtl_write_byte(rtlpriv, REG_LEDCFG2,
(ledcfg | BIT(1) | BIT(5) | BIT(6))); (ledcfg | BIT(1) | BIT(5) | BIT(6)));
else else
......
...@@ -87,7 +87,7 @@ void rtl92d_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw, ...@@ -87,7 +87,7 @@ void rtl92d_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
if (rtlefuse->eeprom_regulatory != 0) if (rtlefuse->eeprom_regulatory != 0)
turbo_scanoff = true; turbo_scanoff = true;
if (mac->act_scanning == true) { if (mac->act_scanning) {
tx_agc[RF90_PATH_A] = 0x3f3f3f3f; tx_agc[RF90_PATH_A] = 0x3f3f3f3f;
tx_agc[RF90_PATH_B] = 0x3f3f3f3f; tx_agc[RF90_PATH_B] = 0x3f3f3f3f;
if (turbo_scanoff) { if (turbo_scanoff) {
...@@ -416,9 +416,9 @@ bool rtl92d_phy_enable_anotherphy(struct ieee80211_hw *hw, bool bmac0) ...@@ -416,9 +416,9 @@ bool rtl92d_phy_enable_anotherphy(struct ieee80211_hw *hw, bool bmac0)
struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = &(rtlpriv->rtlhal); struct rtl_hal *rtlhal = &(rtlpriv->rtlhal);
u8 u1btmp; u8 u1btmp;
u8 direct = bmac0 == true ? BIT(3) | BIT(2) : BIT(3); u8 direct = bmac0 ? BIT(3) | BIT(2) : BIT(3);
u8 mac_reg = bmac0 == true ? REG_MAC1 : REG_MAC0; u8 mac_reg = bmac0 ? REG_MAC1 : REG_MAC0;
u8 mac_on_bit = bmac0 == true ? MAC1_ON : MAC0_ON; u8 mac_on_bit = bmac0 ? MAC1_ON : MAC0_ON;
bool bresult = true; /* true: need to enable BB/RF power */ bool bresult = true; /* true: need to enable BB/RF power */
rtlhal->during_mac0init_radiob = false; rtlhal->during_mac0init_radiob = false;
...@@ -447,9 +447,9 @@ void rtl92d_phy_powerdown_anotherphy(struct ieee80211_hw *hw, bool bmac0) ...@@ -447,9 +447,9 @@ void rtl92d_phy_powerdown_anotherphy(struct ieee80211_hw *hw, bool bmac0)
struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = &(rtlpriv->rtlhal); struct rtl_hal *rtlhal = &(rtlpriv->rtlhal);
u8 u1btmp; u8 u1btmp;
u8 direct = bmac0 == true ? BIT(3) | BIT(2) : BIT(3); u8 direct = bmac0 ? BIT(3) | BIT(2) : BIT(3);
u8 mac_reg = bmac0 == true ? REG_MAC1 : REG_MAC0; u8 mac_reg = bmac0 ? REG_MAC1 : REG_MAC0;
u8 mac_on_bit = bmac0 == true ? MAC1_ON : MAC0_ON; u8 mac_on_bit = bmac0 ? MAC1_ON : MAC0_ON;
rtlhal->during_mac0init_radiob = false; rtlhal->during_mac0init_radiob = false;
rtlhal->during_mac1init_radioa = false; rtlhal->during_mac1init_radioa = false;
...@@ -573,7 +573,7 @@ bool rtl92d_phy_rf6052_config(struct ieee80211_hw *hw) ...@@ -573,7 +573,7 @@ bool rtl92d_phy_rf6052_config(struct ieee80211_hw *hw)
udelay(1); udelay(1);
switch (rfpath) { switch (rfpath) {
case RF90_PATH_A: case RF90_PATH_A:
if (true_bpath == true) if (true_bpath)
rtstatus = rtl92d_phy_config_rf_with_headerfile( rtstatus = rtl92d_phy_config_rf_with_headerfile(
hw, radiob_txt, hw, radiob_txt,
(enum radio_path)rfpath); (enum radio_path)rfpath);
......
...@@ -614,7 +614,7 @@ bool rtl92de_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats, ...@@ -614,7 +614,7 @@ bool rtl92de_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats,
(u8) (u8)
GET_RX_DESC_RXMCS(pdesc)); GET_RX_DESC_RXMCS(pdesc));
rx_status->mactime = GET_RX_DESC_TSFL(pdesc); rx_status->mactime = GET_RX_DESC_TSFL(pdesc);
if (phystatus == true) { if (phystatus) {
p_drvinfo = (struct rx_fwinfo_92d *)(skb->data + p_drvinfo = (struct rx_fwinfo_92d *)(skb->data +
stats->rx_bufshift); stats->rx_bufshift);
_rtl92de_translate_rx_signal_stuff(hw, _rtl92de_translate_rx_signal_stuff(hw,
...@@ -876,7 +876,7 @@ void rtl92de_tx_fill_cmddesc(struct ieee80211_hw *hw, ...@@ -876,7 +876,7 @@ void rtl92de_tx_fill_cmddesc(struct ieee80211_hw *hw,
void rtl92de_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val) void rtl92de_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val)
{ {
if (istx == true) { if (istx) {
switch (desc_name) { switch (desc_name) {
case HW_DESC_OWN: case HW_DESC_OWN:
wmb(); wmb();
...@@ -917,7 +917,7 @@ u32 rtl92de_get_desc(u8 *p_desc, bool istx, u8 desc_name) ...@@ -917,7 +917,7 @@ u32 rtl92de_get_desc(u8 *p_desc, bool istx, u8 desc_name)
{ {
u32 ret = 0; u32 ret = 0;
if (istx == true) { if (istx) {
switch (desc_name) { switch (desc_name) {
case HW_DESC_OWN: case HW_DESC_OWN:
ret = GET_TX_DESC_OWN(p_desc); ret = GET_TX_DESC_OWN(p_desc);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册