提交 98eed3d1 编写于 作者: R Rodrigo Vivi

drm/i915/cfl: Fix Workarounds.

During the review of Coffee Lake workarounds Mika pointed out
that WaDisableKillLogic and GEN9_DISABLE_OCL_OOB_SUPPRESS_LOGIC
should be removed from CFL and with that I should carry the rv-b.

However when doing the v2 I removed another Workaround that should
remain because although not mentioned by spec the history of hangs
around it advocates on its favor.

On some follow-up patches I continued operating on the wrong
workardound, but Ville noticed that, so here is the fix for the
current CFL code that is upstream already.

Fixes: 46c26662 ("drm/i915/cfl: Introduce Coffee Lake workarounds.")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
上级 4d470f73
......@@ -809,9 +809,10 @@ static int gen9_init_workarounds(struct intel_engine_cs *engine)
I915_WRITE(BDW_SCRATCH1, I915_READ(BDW_SCRATCH1) |
GEN9_LBS_SLA_RETRY_TIMER_DECREMENT_ENABLE);
/* WaDisableKillLogic:bxt,skl,kbl,cfl */
I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) |
ECOCHK_DIS_TLB);
/* WaDisableKillLogic:bxt,skl,kbl */
if (!IS_COFFEELAKE(dev_priv))
I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) |
ECOCHK_DIS_TLB);
/* WaClearFlowControlGpgpuContextSave:skl,bxt,kbl,glk,cfl */
/* WaDisablePartialInstShootdown:skl,bxt,kbl,glk,cfl */
......@@ -882,10 +883,9 @@ static int gen9_init_workarounds(struct intel_engine_cs *engine)
WA_SET_BIT_MASKED(HDC_CHICKEN0,
HDC_FORCE_NON_COHERENT);
/* WaDisableHDCInvalidation:skl,bxt,kbl */
if (!IS_COFFEELAKE(dev_priv))
I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) |
BDW_DISABLE_HDC_INVALIDATION);
/* WaDisableHDCInvalidation:skl,bxt,kbl,cfl */
I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) |
BDW_DISABLE_HDC_INVALIDATION);
/* WaDisableSamplerPowerBypassForSOPingPong:skl,bxt,kbl,cfl */
if (IS_SKYLAKE(dev_priv) ||
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册