提交 98ed4ceb 编写于 作者: P Pawel Moll

ARM: vexpress: Get rid of MMIO_P2V

This patch gets rid of the MMIO_P2V and __MMIO_P2V macros,
defining constant virtual base for motherboard and tile
peripherals instead.

Additionally, in preparation for the new motherboard memory
map, the motherboard peripherals are using base pointers
calculated in runtime, instead of compile-time calculated
values.
Signed-off-by: NPawel Moll <pawel.moll@arm.com>
上级 b01543df
......@@ -9,7 +9,12 @@
*
* Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview
* can have 16-bit or 32-bit selectable via a bit in the control register.
*
* Every SP804 contains two identical timers.
*/
#define TIMER_1_BASE 0x00
#define TIMER_2_BASE 0x20
#define TIMER_LOAD 0x00 /* ACVR rw */
#define TIMER_VALUE 0x04 /* ACVR ro */
#define TIMER_CTRL 0x08 /* ACVR rw */
......
#define __MMIO_P2V(x) (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000)
#define MMIO_P2V(x) ((void __iomem *)__MMIO_P2V(x))
#define AMBA_DEVICE(name,busid,base,plat) \
struct amba_device name##_device = { \
.dev = { \
......@@ -17,3 +14,9 @@ struct amba_device name##_device = { \
.irq = IRQ_##base, \
/* .dma = DMA_##base,*/ \
}
/* 2MB large area for motherboard's peripherals static mapping */
#define V2M_PERIPH 0xf8000000
/* Tile's peripherals static mappings should start here */
#define V2T_PERIPH 0xf8200000
......@@ -30,57 +30,29 @@
#include <plat/clcd.h>
#define V2M_PA_CS7 0x10000000
static struct map_desc ct_ca9x4_io_desc[] __initdata = {
{
.virtual = __MMIO_P2V(CT_CA9X4_MPIC),
.pfn = __phys_to_pfn(CT_CA9X4_MPIC),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = __MMIO_P2V(CT_CA9X4_SP804_TIMER),
.pfn = __phys_to_pfn(CT_CA9X4_SP804_TIMER),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = __MMIO_P2V(CT_CA9X4_L2CC),
.pfn = __phys_to_pfn(CT_CA9X4_L2CC),
.length = SZ_4K,
.type = MT_DEVICE,
.virtual = V2T_PERIPH,
.pfn = __phys_to_pfn(CT_CA9X4_MPIC),
.length = SZ_8K,
.type = MT_DEVICE,
},
};
static void __init ct_ca9x4_map_io(void)
{
iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
#ifdef CONFIG_LOCAL_TIMERS
twd_base = MMIO_P2V(A9_MPCORE_TWD);
twd_base = ioremap(A9_MPCORE_TWD, SZ_32);
#endif
iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
}
static void __init ct_ca9x4_init_irq(void)
{
gic_init(0, 29, MMIO_P2V(A9_MPCORE_GIC_DIST),
MMIO_P2V(A9_MPCORE_GIC_CPU));
}
#if 0
static void __init ct_ca9x4_timer_init(void)
{
writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL);
writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL);
sp804_clocksource_init(MMIO_P2V(CT_CA9X4_TIMER1), "ct-timer1");
sp804_clockevents_init(MMIO_P2V(CT_CA9X4_TIMER0), IRQ_CT_CA9X4_TIMER0,
"ct-timer0");
gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K),
ioremap(A9_MPCORE_GIC_CPU, SZ_256));
}
static struct sys_timer ct_ca9x4_timer = {
.init = ct_ca9x4_timer_init,
};
#endif
static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
{
v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0);
......@@ -201,7 +173,7 @@ static void __init ct_ca9x4_init(void)
int i;
#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC);
void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
/* set RAM latencies to 1 cycle for this core tile. */
writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
......@@ -217,9 +189,17 @@ static void __init ct_ca9x4_init(void)
}
#ifdef CONFIG_SMP
static void *ct_ca9x4_scu_base __initdata;
static void __init ct_ca9x4_init_cpu_map(void)
{
int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU));
int i, ncores;
ct_ca9x4_scu_base = ioremap(A9_MPCORE_SCU, SZ_128);
if (WARN_ON(!ct_ca9x4_scu_base))
return;
ncores = scu_get_core_count(ct_ca9x4_scu_base);
if (ncores > nr_cpu_ids) {
pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
......@@ -235,7 +215,7 @@ static void __init ct_ca9x4_init_cpu_map(void)
static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
{
scu_enable(MMIO_P2V(A9_MPCORE_SCU));
scu_enable(ct_ca9x4_scu_base);
}
#endif
......
......@@ -22,9 +22,6 @@
#define CT_CA9X4_SYSWDT (0x1e007000)
#define CT_CA9X4_L2CC (0x1e00a000)
#define CT_CA9X4_TIMER0 (CT_CA9X4_SP804_TIMER + 0x000)
#define CT_CA9X4_TIMER1 (CT_CA9X4_SP804_TIMER + 0x020)
#define A9_MPCORE_SCU (CT_CA9X4_MPIC + 0x0000)
#define A9_MPCORE_GIC_CPU (CT_CA9X4_MPIC + 0x0100)
#define A9_MPCORE_GIT (CT_CA9X4_MPIC + 0x0200)
......
......@@ -39,33 +39,30 @@
#define V2M_CF (V2M_PA_CS7 + 0x0001a000)
#define V2M_CLCD (V2M_PA_CS7 + 0x0001f000)
#define V2M_SYS_ID (V2M_SYSREGS + 0x000)
#define V2M_SYS_SW (V2M_SYSREGS + 0x004)
#define V2M_SYS_LED (V2M_SYSREGS + 0x008)
#define V2M_SYS_100HZ (V2M_SYSREGS + 0x024)
#define V2M_SYS_FLAGS (V2M_SYSREGS + 0x030)
#define V2M_SYS_FLAGSSET (V2M_SYSREGS + 0x030)
#define V2M_SYS_FLAGSCLR (V2M_SYSREGS + 0x034)
#define V2M_SYS_NVFLAGS (V2M_SYSREGS + 0x038)
#define V2M_SYS_NVFLAGSSET (V2M_SYSREGS + 0x038)
#define V2M_SYS_NVFLAGSCLR (V2M_SYSREGS + 0x03c)
#define V2M_SYS_MCI (V2M_SYSREGS + 0x048)
#define V2M_SYS_FLASH (V2M_SYSREGS + 0x03c)
#define V2M_SYS_CFGSW (V2M_SYSREGS + 0x058)
#define V2M_SYS_24MHZ (V2M_SYSREGS + 0x05c)
#define V2M_SYS_MISC (V2M_SYSREGS + 0x060)
#define V2M_SYS_DMA (V2M_SYSREGS + 0x064)
#define V2M_SYS_PROCID0 (V2M_SYSREGS + 0x084)
#define V2M_SYS_PROCID1 (V2M_SYSREGS + 0x088)
#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
#define V2M_TIMER0 (V2M_TIMER01 + 0x000)
#define V2M_TIMER1 (V2M_TIMER01 + 0x020)
#define V2M_TIMER2 (V2M_TIMER23 + 0x000)
#define V2M_TIMER3 (V2M_TIMER23 + 0x020)
/*
* Offsets from SYSREGS base
*/
#define V2M_SYS_ID 0x000
#define V2M_SYS_SW 0x004
#define V2M_SYS_LED 0x008
#define V2M_SYS_100HZ 0x024
#define V2M_SYS_FLAGS 0x030
#define V2M_SYS_FLAGSSET 0x030
#define V2M_SYS_FLAGSCLR 0x034
#define V2M_SYS_NVFLAGS 0x038
#define V2M_SYS_NVFLAGSSET 0x038
#define V2M_SYS_NVFLAGSCLR 0x03c
#define V2M_SYS_MCI 0x048
#define V2M_SYS_FLASH 0x03c
#define V2M_SYS_CFGSW 0x058
#define V2M_SYS_24MHZ 0x05c
#define V2M_SYS_MISC 0x060
#define V2M_SYS_DMA 0x064
#define V2M_SYS_PROCID0 0x084
#define V2M_SYS_PROCID1 0x088
#define V2M_SYS_CFGDATA 0x0a0
#define V2M_SYS_CFGCTRL 0x0a4
#define V2M_SYS_CFGSTAT 0x0a8
/*
......@@ -117,6 +114,7 @@
int v2m_cfg_write(u32 devfn, u32 data);
int v2m_cfg_read(u32 devfn, u32 *data);
void v2m_flags_set(u32 data);
/*
* Core tile IDs
......
......@@ -14,7 +14,6 @@
#include <linux/io.h>
#include <mach/motherboard.h>
#define V2M_PA_CS7 0x10000000
#include "core.h"
......@@ -43,7 +42,5 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR));
writel(virt_to_phys(versatile_secondary_startup),
MMIO_P2V(V2M_SYS_FLAGSSET));
v2m_flags_set(virt_to_phys(versatile_secondary_startup));
}
......@@ -40,29 +40,45 @@
static struct map_desc v2m_io_desc[] __initdata = {
{
.virtual = __MMIO_P2V(V2M_PA_CS7),
.virtual = V2M_PERIPH,
.pfn = __phys_to_pfn(V2M_PA_CS7),
.length = SZ_128K,
.type = MT_DEVICE,
},
};
static void __init v2m_timer_init(void)
static void __iomem *v2m_sysreg_base;
static void __init v2m_sysctl_init(void __iomem *base)
{
u32 scctrl;
if (WARN_ON(!base))
return;
/* Select 1MHz TIMCLK as the reference clock for SP804 timers */
scctrl = readl(MMIO_P2V(V2M_SYSCTL + SCCTRL));
scctrl = readl(base + SCCTRL);
scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK;
scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK;
writel(scctrl, MMIO_P2V(V2M_SYSCTL + SCCTRL));
writel(scctrl, base + SCCTRL);
}
writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
static void __init v2m_sp804_init(void __iomem *base, unsigned int irq)
{
if (WARN_ON(!base || irq == NO_IRQ))
return;
writel(0, base + TIMER_1_BASE + TIMER_CTRL);
writel(0, base + TIMER_2_BASE + TIMER_CTRL);
sp804_clocksource_init(MMIO_P2V(V2M_TIMER1), "v2m-timer1");
sp804_clockevents_init(MMIO_P2V(V2M_TIMER0), IRQ_V2M_TIMER0,
"v2m-timer0");
sp804_clocksource_init(base + TIMER_2_BASE, "v2m-timer1");
sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0");
}
static void __init v2m_timer_init(void)
{
v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K));
v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0);
}
static struct sys_timer v2m_timer = {
......@@ -82,14 +98,14 @@ int v2m_cfg_write(u32 devfn, u32 data)
devfn |= SYS_CFG_START | SYS_CFG_WRITE;
spin_lock(&v2m_cfg_lock);
val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
writel(val & ~SYS_CFG_COMPLETE, MMIO_P2V(V2M_SYS_CFGSTAT));
val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
writel(val & ~SYS_CFG_COMPLETE, v2m_sysreg_base + V2M_SYS_CFGSTAT);
writel(data, MMIO_P2V(V2M_SYS_CFGDATA));
writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL));
writel(data, v2m_sysreg_base + V2M_SYS_CFGDATA);
writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL);
do {
val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
} while (val == 0);
spin_unlock(&v2m_cfg_lock);
......@@ -103,22 +119,28 @@ int v2m_cfg_read(u32 devfn, u32 *data)
devfn |= SYS_CFG_START;
spin_lock(&v2m_cfg_lock);
writel(0, MMIO_P2V(V2M_SYS_CFGSTAT));
writel(devfn, MMIO_P2V(V2M_SYS_CFGCTRL));
writel(0, v2m_sysreg_base + V2M_SYS_CFGSTAT);
writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL);
mb();
do {
cpu_relax();
val = readl(MMIO_P2V(V2M_SYS_CFGSTAT));
val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
} while (val == 0);
*data = readl(MMIO_P2V(V2M_SYS_CFGDATA));
*data = readl(v2m_sysreg_base + V2M_SYS_CFGDATA);
spin_unlock(&v2m_cfg_lock);
return !!(val & SYS_CFG_ERR);
}
void __init v2m_flags_set(u32 data)
{
writel(~0, v2m_sysreg_base + V2M_SYS_FLAGSCLR);
writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET);
}
static struct resource v2m_pcie_i2c_resource = {
.start = V2M_SERIAL_BUS_PCI,
......@@ -204,7 +226,7 @@ static struct platform_device v2m_usb_device = {
static void v2m_flash_set_vpp(struct platform_device *pdev, int on)
{
writel(on != 0, MMIO_P2V(V2M_SYS_FLASH));
writel(on != 0, v2m_sysreg_base + V2M_SYS_FLASH);
}
static struct physmap_flash_data v2m_flash_data = {
......@@ -258,7 +280,7 @@ static struct platform_device v2m_cf_device = {
static unsigned int v2m_mmci_status(struct device *dev)
{
return readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0);
return readl(v2m_sysreg_base + V2M_SYS_MCI) & (1 << 0);
}
static struct mmci_platform_data v2m_mmci_data = {
......@@ -371,7 +393,7 @@ static void __init v2m_init_early(void)
{
ct_desc->init_early();
clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
}
static void v2m_power_off(void)
......@@ -400,7 +422,8 @@ static void __init v2m_populate_ct_desc(void)
u32 current_tile_id;
ct_desc = NULL;
current_tile_id = readl(MMIO_P2V(V2M_SYS_PROCID0)) & V2M_CT_ID_MASK;
current_tile_id = readl(v2m_sysreg_base + V2M_SYS_PROCID0)
& V2M_CT_ID_MASK;
for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i)
if (ct_descs[i]->id == current_tile_id)
......@@ -414,6 +437,7 @@ static void __init v2m_populate_ct_desc(void)
static void __init v2m_map_io(void)
{
iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
v2m_sysreg_base = ioremap(V2M_SYSREGS, SZ_4K);
v2m_populate_ct_desc();
ct_desc->map_io();
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册