sh: Add SDHI power control support to Ecovec

This patch adds support for SDHI power control to the
Ecovec board. Platform data and power control callbacks
for SDHI0 and SDHI1 are added. Power is by default off.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

arch/sh/boards/mach-ecovec24/setup.c

@@ -20,6 +20,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/tsc2007.h>
 #include <linux/input.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
 #include <asm/heartbeat.h>
@@ -421,6 +422,15 @@ static struct i2c_board_info ts_i2c_clients = {
 };
 
 /* SHDI0 */
+static void sdhi0_set_pwr(struct platform_device *pdev, int state)
+{
+	gpio_set_value(GPIO_PTB6, state);
+}
+
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.set_pwr = sdhi0_set_pwr,
+};
+
 static struct resource sdhi0_resources[] = {
 	[0] = {
 		.name	= "SDHI0",
@@ -439,12 +449,24 @@ static struct platform_device sdhi0_device = {
 	.num_resources  = ARRAY_SIZE(sdhi0_resources),
 	.resource       = sdhi0_resources,
 	.id             = 0,
+	.dev	= {
+		.platform_data	= &sdhi0_info,
+	},
 	.archdata = {
 		.hwblk_id = HWBLK_SDHI0,
 	},
 };
 
 /* SHDI1 */
+static void sdhi1_set_pwr(struct platform_device *pdev, int state)
+{
+	gpio_set_value(GPIO_PTB7, state);
+}
+
+static struct sh_mobile_sdhi_info sdhi1_info = {
+	.set_pwr = sdhi1_set_pwr,
+};
+
 static struct resource sdhi1_resources[] = {
 	[0] = {
 		.name	= "SDHI1",
@@ -463,6 +485,9 @@ static struct platform_device sdhi1_device = {
 	.num_resources  = ARRAY_SIZE(sdhi1_resources),
 	.resource       = sdhi1_resources,
 	.id             = 1,
+	.dev	= {
+		.platform_data	= &sdhi1_info,
+	},
 	.archdata = {
 		.hwblk_id = HWBLK_SDHI1,
 	},
@@ -748,7 +773,7 @@ static int __init arch_setup(void)
 	gpio_direction_input(GPIO_PTR5);
 	gpio_direction_input(GPIO_PTR6);
 
-	/* enable SDHI0 */
+	/* enable SDHI0 (needs DS2.4 set to ON) */
 	gpio_request(GPIO_FN_SDHI0CD,  NULL);
 	gpio_request(GPIO_FN_SDHI0WP,  NULL);
 	gpio_request(GPIO_FN_SDHI0CMD, NULL);
@@ -757,8 +782,10 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_FN_SDHI0D2,  NULL);
 	gpio_request(GPIO_FN_SDHI0D1,  NULL);
 	gpio_request(GPIO_FN_SDHI0D0,  NULL);
+	gpio_request(GPIO_PTB6, NULL);
+	gpio_direction_output(GPIO_PTB6, 0);
 
-	/* enable SDHI1 */
+	/* enable SDHI1 (needs DS2.6,7 set to ON,OFF) */
 	gpio_request(GPIO_FN_SDHI1CD,  NULL);
 	gpio_request(GPIO_FN_SDHI1WP,  NULL);
 	gpio_request(GPIO_FN_SDHI1CMD, NULL);
@@ -767,11 +794,8 @@ static int __init arch_setup(void)
 	gpio_request(GPIO_FN_SDHI1D2,  NULL);
 	gpio_request(GPIO_FN_SDHI1D1,  NULL);
 	gpio_request(GPIO_FN_SDHI1D0,  NULL);
-
-	gpio_request(GPIO_PTB6, NULL);
 	gpio_request(GPIO_PTB7, NULL);
-	gpio_direction_output(GPIO_PTB6, 1);
-	gpio_direction_output(GPIO_PTB7, 1);
+	gpio_direction_output(GPIO_PTB7, 0);
 
 	/* I/O buffer drive ability is high for SDHI1 */
 	ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);