V4L/DVB (9107): Alternative version of Terratec Cinergy T2 driver

Alternative version of the Terratec Cinergy T2 driver that uses the dvb framework.
Signed-off-by: NTomi Orava <tomimo@ncircle.nullnet.fi>
Signed-off-by: NThierry MERLE <thierry.merle@free.fr>
[mchehab@redhat.com: fix dvb Makefile]
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/Kconfig

@@ -20,7 +20,6 @@ comment "Supported USB Adapters"
 source "drivers/media/dvb/dvb-usb/Kconfig"
 source "drivers/media/dvb/ttusb-budget/Kconfig"
 source "drivers/media/dvb/ttusb-dec/Kconfig"
-source "drivers/media/dvb/cinergyT2/Kconfig"
 source "drivers/media/dvb/siano/Kconfig"
 
 comment "Supported FlexCopII (B2C2) Adapters"

drivers/media/dvb/Makefile

@@ -2,4 +2,4 @@
 # Makefile for the kernel multimedia device drivers.
 #
 
-obj-y        := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ cinergyT2/ dvb-usb/ pluto2/ siano/ dm1105/
+obj-y        := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/

drivers/media/dvb/cinergyT2/Kconfig

-config DVB_CINERGYT2
-	tristate "Terratec CinergyT2/qanu USB2 DVB-T receiver"
-	depends on DVB_CORE && USB && INPUT
-	help
-	  Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers
-
-	  Say Y if you own such a device and want to use it.
-
-
-config DVB_CINERGYT2_TUNING
-	bool "sophisticated fine-tuning for CinergyT2 cards"
-	depends on DVB_CINERGYT2
-	help
-	  Here you can fine-tune some parameters of the CinergyT2 driver.
-
-	  Normally you don't need to touch this, but in exotic setups you
-	  may fine-tune your setup and adjust e.g. DMA buffer sizes for
-	  a particular application.
-
-
-config DVB_CINERGYT2_STREAM_URB_COUNT
-	int "Number of queued USB Request Blocks for Highspeed Stream Transfers"
-	depends on DVB_CINERGYT2_TUNING
-	default "32"
-	help
-	  USB Request Blocks for Highspeed Stream transfers are scheduled in
-	  a queue for the Host Controller.
-
-	  Usually the default value is a safe choice.
-
-	  You may increase this number if you are using this device in a
-	  Server Environment with many high-traffic USB Highspeed devices
-	  sharing the same USB bus.
-
-
-config DVB_CINERGYT2_STREAM_BUF_SIZE
-	int "Size of URB Stream Buffers for Highspeed Transfers"
-	depends on DVB_CINERGYT2_TUNING
-	default "512"
-	help
-	  Should be a multiple of native buffer size of 512 bytes.
-	  Default value is a safe choice.
-
-	  You may increase this number if you are using this device in a
-	  Server Environment with many high-traffic USB Highspeed devices
-	  sharing the same USB bus.
-
-
-config DVB_CINERGYT2_QUERY_INTERVAL
-	int "Status update interval [milliseconds]"
-	depends on DVB_CINERGYT2_TUNING
-	default "250"
-	help
-	  This is the interval for status readouts from the demodulator.
-	  You may try lower values if you need more responsive signal quality
-	  measurements.
-
-	  Please keep in mind that these updates cause traffic on the tuner
-	  control bus and thus may or may not affect reception sensitivity.
-
-	  The default value should be a safe choice for common applications.
-
-
-config DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
-	bool "Register the onboard IR Remote Control Receiver as Input Device"
-	depends on DVB_CINERGYT2_TUNING
-	default y
-	help
-	  Enable this option if you want to use the onboard Infrared Remote
-	  Control Receiver as Linux-Input device.
-
-	  Right now only the keycode table for the default Remote Control
-	  delivered with the device is supported, please see the driver
-	  source code to find out how to add support for other controls.
-
-
-config DVB_CINERGYT2_RC_QUERY_INTERVAL
-	int "Infrared Remote Controller update interval [milliseconds]"
-	depends on DVB_CINERGYT2_TUNING && DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
-	default "50"
-	help
-	  If you have a very fast-repeating remote control you can try lower
-	  values, for normal consumer receivers the default value should be
-	  a safe choice.
-

drivers/media/dvb/cinergyT2/Makefile

-obj-$(CONFIG_DVB_CINERGYT2) += cinergyT2.o
-
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/

drivers/media/dvb/dvb-usb/Kconfig

@@ -259,6 +259,14 @@ config DVB_USB_DW2102
 	  Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers
 	  and the TeVii S650.
 
+config 	DVB_USB_CINERGY_T2
+	tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver"
+	depends on DVB_USB
+	help
+	  Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers
+
+	  Say Y if you own such a device and want to use it.
+
 config DVB_USB_ANYSEE
 	tristate "Anysee DVB-T/C USB2.0 support"
 	depends on DVB_USB

drivers/media/dvb/dvb-usb/Makefile

@@ -73,6 +73,10 @@ obj-$(CONFIG_DVB_USB_DTV5100) += dvb-usb-dtv5100.o
 dvb-usb-af9015-objs = af9015.o
 obj-$(CONFIG_DVB_USB_AF9015) += dvb-usb-af9015.o
 
+dvb-usb-cinergyT2-objs = cinergyT2-core.o cinergyT2-fe.o
+obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o
+
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
 # due to tuner-xc3028
 EXTRA_CFLAGS += -Idrivers/media/common/tuners

drivers/media/dvb/dvb-usb/cinergyT2-core.c

+/*
+ * TerraTec Cinergy T2/qanu USB2 DVB-T adapter.
+ *
+ * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi)
+ *
+ * Based on the dvb-usb-framework code and the
+ * original Terratec Cinergy T2 driver by:
+ *
+ * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and
+ *		    Holger Waechtler <holger@qanu.de>
+ *
+ *  Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include "cinergyT2.h"
+
+
+/* debug */
+int dvb_usb_cinergyt2_debug;
+int disable_remote;
+
+module_param_named(debug, dvb_usb_cinergyt2_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info, xfer=2, rc=4 "
+		"(or-able)).");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+
+/* We are missing a release hook with usb_device data */
+struct dvb_usb_device *cinergyt2_usb_device;
+
+static struct dvb_usb_device_properties cinergyt2_properties;
+
+static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable)
+{
+	char buf[] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 };
+	char result[64];
+	return dvb_usb_generic_rw(adap->dev, buf, sizeof(buf), result,
+				sizeof(result), 0);
+}
+
+static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable)
+{
+	char buf[] = { CINERGYT2_EP1_SLEEP_MODE, enable ? 0 : 1 };
+	char state[3];
+	return dvb_usb_generic_rw(d, buf, sizeof(buf), state, sizeof(state), 0);
+}
+
+static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	char query[] = { CINERGYT2_EP1_GET_FIRMWARE_VERSION };
+	char state[3];
+	int ret;
+
+	adap->fe = cinergyt2_fe_attach(adap->dev);
+
+	ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state,
+				sizeof(state), 0);
+	if (ret < 0) {
+		deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep "
+			"state info\n");
+	}
+
+	/* Copy this pointer as we are gonna need it in the release phase */
+	cinergyt2_usb_device = adap->dev;
+
+	return 0;
+}
+
+static struct dvb_usb_rc_key cinergyt2_rc_keys[] = {
+	{ 0x04,	0x01,	KEY_POWER },
+	{ 0x04,	0x02,	KEY_1 },
+	{ 0x04,	0x03,	KEY_2 },
+	{ 0x04,	0x04,	KEY_3 },
+	{ 0x04,	0x05,	KEY_4 },
+	{ 0x04,	0x06,	KEY_5 },
+	{ 0x04,	0x07,	KEY_6 },
+	{ 0x04,	0x08,	KEY_7 },
+	{ 0x04,	0x09,	KEY_8 },
+	{ 0x04,	0x0a,	KEY_9 },
+	{ 0x04,	0x0c,	KEY_0 },
+	{ 0x04,	0x0b,	KEY_VIDEO },
+	{ 0x04,	0x0d,	KEY_REFRESH },
+	{ 0x04,	0x0e,	KEY_SELECT },
+	{ 0x04,	0x0f,	KEY_EPG },
+	{ 0x04,	0x10,	KEY_UP },
+	{ 0x04,	0x14,	KEY_DOWN },
+	{ 0x04,	0x11,	KEY_LEFT },
+	{ 0x04,	0x13,	KEY_RIGHT },
+	{ 0x04,	0x12,	KEY_OK },
+	{ 0x04,	0x15,	KEY_TEXT },
+	{ 0x04,	0x16,	KEY_INFO },
+	{ 0x04,	0x17,	KEY_RED },
+	{ 0x04,	0x18,	KEY_GREEN },
+	{ 0x04,	0x19,	KEY_YELLOW },
+	{ 0x04,	0x1a,	KEY_BLUE },
+	{ 0x04,	0x1c,	KEY_VOLUMEUP },
+	{ 0x04,	0x1e,	KEY_VOLUMEDOWN },
+	{ 0x04,	0x1d,	KEY_MUTE },
+	{ 0x04,	0x1b,	KEY_CHANNELUP },
+	{ 0x04,	0x1f,	KEY_CHANNELDOWN },
+	{ 0x04,	0x40,	KEY_PAUSE },
+	{ 0x04,	0x4c,	KEY_PLAY },
+	{ 0x04,	0x58,	KEY_RECORD },
+	{ 0x04,	0x54,	KEY_PREVIOUS },
+	{ 0x04,	0x48,	KEY_STOP },
+	{ 0x04,	0x5c,	KEY_NEXT }
+};
+
+static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+	u8 key[5] = {0, 0, 0, 0, 0}, cmd = CINERGYT2_EP1_GET_RC_EVENTS;
+	*state = REMOTE_NO_KEY_PRESSED;
+
+	dvb_usb_generic_rw(d, &cmd, 1, key, sizeof(key), 0);
+	if (key[4] == 0xff)
+		return 0;
+
+	/* hack to pass checksum on the custom field (is set to 0xeb) */
+	key[2] = ~0x04;
+	dvb_usb_nec_rc_key_to_event(d, key, event, state);
+	if (key[0] != 0)
+		deb_info("key: %x %x %x %x %x\n",
+			 key[0], key[1], key[2], key[3], key[4]);
+
+	return 0;
+}
+
+static int cinergyt2_usb_probe(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	return dvb_usb_device_init(intf, &cinergyt2_properties,
+					THIS_MODULE, NULL, adapter_nr);
+}
+
+
+static struct usb_device_id cinergyt2_usb_table[] = {
+	{ USB_DEVICE(USB_VID_TERRATEC, 0x0038) },
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(usb, cinergyt2_usb_table);
+
+static struct dvb_usb_device_properties cinergyt2_properties = {
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.streaming_ctrl   = cinergyt2_streaming_ctrl,
+			.frontend_attach  = cinergyt2_frontend_attach,
+
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_BULK,
+				.count = 5,
+				.endpoint = 0x02,
+				.u = {
+					.bulk = {
+						.buffersize = 512,
+					}
+				}
+			},
+		}
+	},
+
+	.power_ctrl       = cinergyt2_power_ctrl,
+
+	.rc_interval      = 50,
+	.rc_key_map       = cinergyt2_rc_keys,
+	.rc_key_map_size  = ARRAY_SIZE(cinergyt2_rc_keys),
+	.rc_query         = cinergyt2_rc_query,
+
+	.generic_bulk_ctrl_endpoint = 1,
+
+	.num_device_descs = 1,
+	.devices = {
+		{ .name = "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver",
+		  .cold_ids = {NULL},
+		  .warm_ids = { &cinergyt2_usb_table[0], NULL },
+		},
+		{ NULL },
+	}
+};
+
+
+static struct usb_driver cinergyt2_driver = {
+	.name		= "cinergyT2",
+	.probe		= cinergyt2_usb_probe,
+	.disconnect	= dvb_usb_device_exit,
+	.id_table	= cinergyt2_usb_table
+};
+
+static int __init cinergyt2_usb_init(void)
+{
+	int err;
+
+	err = usb_register(&cinergyt2_driver);
+	if (err) {
+		err("usb_register() failed! (err %i)\n", err);
+		return err;
+	}
+	return 0;
+}
+
+static void __exit cinergyt2_usb_exit(void)
+{
+	usb_deregister(&cinergyt2_driver);
+}
+
+module_init(cinergyt2_usb_init);
+module_exit(cinergyt2_usb_exit);
+
+MODULE_DESCRIPTION("Terratec Cinergy T2 DVB-T driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tomi Orava");

drivers/media/dvb/dvb-usb/cinergyT2-fe.c

+/*
+ * TerraTec Cinergy T2/qanu USB2 DVB-T adapter.
+ *
+ * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi)
+ *
+ * Based on the dvb-usb-framework code and the
+ * original Terratec Cinergy T2 driver by:
+ *
+ * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and
+ *                  Holger Waechtler <holger@qanu.de>
+ *
+ *  Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include "cinergyT2.h"
+
+
+/**
+ *  convert linux-dvb frontend parameter set into TPS.
+ *  See ETSI ETS-300744, section 4.6.2, table 9 for details.
+ *
+ *  This function is probably reusable and may better get placed in a support
+ *  library.
+ *
+ *  We replace errornous fields by default TPS fields (the ones with value 0).
+ */
+
+static uint16_t compute_tps(struct dvb_frontend_parameters *p)
+{
+	struct dvb_ofdm_parameters *op = &p->u.ofdm;
+	uint16_t tps = 0;
+
+	switch (op->code_rate_HP) {
+	case FEC_2_3:
+		tps |= (1 << 7);
+		break;
+	case FEC_3_4:
+		tps |= (2 << 7);
+		break;
+	case FEC_5_6:
+		tps |= (3 << 7);
+		break;
+	case FEC_7_8:
+		tps |= (4 << 7);
+		break;
+	case FEC_1_2:
+	case FEC_AUTO:
+	default:
+		/* tps |= (0 << 7) */;
+	}
+
+	switch (op->code_rate_LP) {
+	case FEC_2_3:
+		tps |= (1 << 4);
+		break;
+	case FEC_3_4:
+		tps |= (2 << 4);
+		break;
+	case FEC_5_6:
+		tps |= (3 << 4);
+		break;
+	case FEC_7_8:
+		tps |= (4 << 4);
+		break;
+	case FEC_1_2:
+	case FEC_AUTO:
+	default:
+		/* tps |= (0 << 4) */;
+	}
+
+	switch (op->constellation) {
+	case QAM_16:
+		tps |= (1 << 13);
+		break;
+	case QAM_64:
+		tps |= (2 << 13);
+		break;
+	case QPSK:
+	default:
+		/* tps |= (0 << 13) */;
+	}
+
+	switch (op->transmission_mode) {
+	case TRANSMISSION_MODE_8K:
+		tps |= (1 << 0);
+		break;
+	case TRANSMISSION_MODE_2K:
+	default:
+		/* tps |= (0 << 0) */;
+	}
+
+	switch (op->guard_interval) {
+	case GUARD_INTERVAL_1_16:
+		tps |= (1 << 2);
+		break;
+	case GUARD_INTERVAL_1_8:
+		tps |= (2 << 2);
+		break;
+	case GUARD_INTERVAL_1_4:
+		tps |= (3 << 2);
+		break;
+	case GUARD_INTERVAL_1_32:
+	default:
+		/* tps |= (0 << 2) */;
+	}
+
+	switch (op->hierarchy_information) {
+	case HIERARCHY_1:
+		tps |= (1 << 10);
+		break;
+	case HIERARCHY_2:
+		tps |= (2 << 10);
+		break;
+	case HIERARCHY_4:
+		tps |= (3 << 10);
+		break;
+	case HIERARCHY_NONE:
+	default:
+		/* tps |= (0 << 10) */;
+	}
+
+	return tps;
+}
+
+struct cinergyt2_fe_state {
+	struct dvb_frontend fe;
+	struct dvb_usb_device *d;
+};
+
+static int cinergyt2_fe_read_status(struct dvb_frontend *fe,
+					fe_status_t *status)
+{
+	struct cinergyt2_fe_state *state = fe->demodulator_priv;
+	struct dvbt_get_status_msg result;
+	u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
+	int ret;
+
+	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&result,
+			sizeof(result), 0);
+	if (ret < 0)
+		return ret;
+
+	*status = 0;
+
+	if (0xffff - le16_to_cpu(result.gain) > 30)
+		*status |= FE_HAS_SIGNAL;
+	if (result.lock_bits & (1 << 6))
+		*status |= FE_HAS_LOCK;
+	if (result.lock_bits & (1 << 5))
+		*status |= FE_HAS_SYNC;
+	if (result.lock_bits & (1 << 4))
+		*status |= FE_HAS_CARRIER;
+	if (result.lock_bits & (1 << 1))
+		*status |= FE_HAS_VITERBI;
+
+	if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
+			(FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC))
+		*status &= ~FE_HAS_LOCK;
+
+	return 0;
+}
+
+static int cinergyt2_fe_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	struct cinergyt2_fe_state *state = fe->demodulator_priv;
+	struct dvbt_get_status_msg status;
+	char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
+	int ret;
+
+	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status,
+				sizeof(status), 0);
+	if (ret < 0)
+		return ret;
+
+	*ber = le32_to_cpu(status.viterbi_error_rate);
+	return 0;
+}
+
+static int cinergyt2_fe_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
+{
+	struct cinergyt2_fe_state *state = fe->demodulator_priv;
+	struct dvbt_get_status_msg status;
+	u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
+	int ret;
+
+	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&status,
+				sizeof(status), 0);
+	if (ret < 0) {
+		err("cinergyt2_fe_read_unc_blocks() Failed! (Error=%d)\n",
+			ret);
+		return ret;
+	}
+	*unc = le32_to_cpu(status.uncorrected_block_count);
+	return 0;
+}
+
+static int cinergyt2_fe_read_signal_strength(struct dvb_frontend *fe,
+						u16 *strength)
+{
+	struct cinergyt2_fe_state *state = fe->demodulator_priv;
+	struct dvbt_get_status_msg status;
+	char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
+	int ret;
+
+	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status,
+				sizeof(status), 0);
+	if (ret < 0) {
+		err("cinergyt2_fe_read_signal_strength() Failed!"
+			" (Error=%d)\n", ret);
+		return ret;
+	}
+	*strength = (0xffff - le16_to_cpu(status.gain));
+	return 0;
+}
+
+static int cinergyt2_fe_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	struct cinergyt2_fe_state *state = fe->demodulator_priv;
+	struct dvbt_get_status_msg status;
+	char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS };
+	int ret;
+
+	ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status,
+				sizeof(status), 0);
+	if (ret < 0) {
+		err("cinergyt2_fe_read_snr() Failed! (Error=%d)\n", ret);
+		return ret;
+	}
+	*snr = (status.snr << 8) | status.snr;
+	return 0;
+}
+
+static int cinergyt2_fe_init(struct dvb_frontend *fe)
+{
+	return 0;
+}
+
+static int cinergyt2_fe_sleep(struct dvb_frontend *fe)
+{
+	deb_info("cinergyt2_fe_sleep() Called\n");
+	return 0;
+}
+
+static int cinergyt2_fe_get_tune_settings(struct dvb_frontend *fe,
+				struct dvb_frontend_tune_settings *tune)
+{
+	tune->min_delay_ms = 800;
+	return 0;
+}
+
+static int cinergyt2_fe_set_frontend(struct dvb_frontend *fe,
+				  struct dvb_frontend_parameters *fep)
+{
+	struct cinergyt2_fe_state *state = fe->demodulator_priv;
+	struct dvbt_set_parameters_msg param;
+	char result[2];
+	int err;
+
+	param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS;
+	param.tps = cpu_to_le16(compute_tps(fep));
+	param.freq = cpu_to_le32(fep->frequency / 1000);
+	param.bandwidth = 8 - fep->u.ofdm.bandwidth - BANDWIDTH_8_MHZ;
+
+	err = dvb_usb_generic_rw(state->d,
+			(char *)&param, sizeof(param),
+			result, sizeof(result), 0);
+	if (err < 0)
+		err("cinergyt2_fe_set_frontend() Failed! err=%d\n", err);
+
+	return (err < 0) ? err : 0;
+}
+
+static int cinergyt2_fe_get_frontend(struct dvb_frontend *fe,
+				  struct dvb_frontend_parameters *fep)
+{
+	return 0;
+}
+
+static void cinergyt2_fe_release(struct dvb_frontend *fe)
+{
+	struct cinergyt2_fe_state *state = fe->demodulator_priv;
+	if (state != NULL)
+		kfree(state);
+}
+
+static struct dvb_frontend_ops cinergyt2_fe_ops;
+
+struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d)
+{
+	struct cinergyt2_fe_state *s = kzalloc(sizeof(
+					struct cinergyt2_fe_state), GFP_KERNEL);
+	if (s == NULL)
+		return NULL;
+
+	s->d = d;
+	memcpy(&s->fe.ops, &cinergyt2_fe_ops, sizeof(struct dvb_frontend_ops));
+	s->fe.demodulator_priv = s;
+	return &s->fe;
+}
+
+
+static struct dvb_frontend_ops cinergyt2_fe_ops = {
+	.info = {
+		.name			= DRIVER_NAME,
+		.type			= FE_OFDM,
+		.frequency_min		= 174000000,
+		.frequency_max		= 862000000,
+		.frequency_stepsize	= 166667,
+		.caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_1_2
+			| FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4
+			| FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8
+			| FE_CAN_FEC_AUTO | FE_CAN_QPSK
+			| FE_CAN_QAM_16 | FE_CAN_QAM_64
+			| FE_CAN_QAM_AUTO
+			| FE_CAN_TRANSMISSION_MODE_AUTO
+			| FE_CAN_GUARD_INTERVAL_AUTO
+			| FE_CAN_HIERARCHY_AUTO
+			| FE_CAN_RECOVER
+			| FE_CAN_MUTE_TS
+	},
+
+	.release		= cinergyt2_fe_release,
+
+	.init			= cinergyt2_fe_init,
+	.sleep			= cinergyt2_fe_sleep,
+
+	.set_frontend		= cinergyt2_fe_set_frontend,
+	.get_frontend		= cinergyt2_fe_get_frontend,
+	.get_tune_settings	= cinergyt2_fe_get_tune_settings,
+
+	.read_status		= cinergyt2_fe_read_status,
+	.read_ber		= cinergyt2_fe_read_ber,
+	.read_signal_strength	= cinergyt2_fe_read_signal_strength,
+	.read_snr		= cinergyt2_fe_read_snr,
+	.read_ucblocks		= cinergyt2_fe_read_unc_blocks,
+};

drivers/media/dvb/dvb-usb/cinergyT2.h

+/*
+ * TerraTec Cinergy T2/qanu USB2 DVB-T adapter.
+ *
+ * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi)
+ *
+ * Based on the dvb-usb-framework code and the
+ * original Terratec Cinergy T2 driver by:
+ *
+ * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and
+ *                  Holger Waechtler <holger@qanu.de>
+ *
+ *  Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License,  or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not,  write to the Free Software
+ * Foundation,  Inc.,  675 Mass Ave,  Cambridge,  MA 02139,  USA.
+ *
+ */
+
+#ifndef _DVB_USB_CINERGYT2_H_
+#define _DVB_USB_CINERGYT2_H_
+
+#include <linux/usb/input.h>
+
+#define DVB_USB_LOG_PREFIX "cinergyT2"
+#include "dvb-usb.h"
+
+#define DRIVER_NAME "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver"
+
+extern int dvb_usb_cinergyt2_debug;
+
+#define deb_info(args...)  dprintk(dvb_usb_cinergyt2_debug,  0x001, args)
+#define deb_xfer(args...)  dprintk(dvb_usb_cinergyt2_debug,  0x002, args)
+#define deb_pll(args...)   dprintk(dvb_usb_cinergyt2_debug,  0x004, args)
+#define deb_ts(args...)    dprintk(dvb_usb_cinergyt2_debug,  0x008, args)
+#define deb_err(args...)   dprintk(dvb_usb_cinergyt2_debug,  0x010, args)
+#define deb_rc(args...)    dprintk(dvb_usb_cinergyt2_debug,  0x020, args)
+#define deb_fw(args...)    dprintk(dvb_usb_cinergyt2_debug,  0x040, args)
+#define deb_mem(args...)   dprintk(dvb_usb_cinergyt2_debug,  0x080, args)
+#define deb_uxfer(args...) dprintk(dvb_usb_cinergyt2_debug,  0x100, args)
+
+
+
+enum cinergyt2_ep1_cmd {
+	CINERGYT2_EP1_PID_TABLE_RESET		= 0x01,
+	CINERGYT2_EP1_PID_SETUP			= 0x02,
+	CINERGYT2_EP1_CONTROL_STREAM_TRANSFER	= 0x03,
+	CINERGYT2_EP1_SET_TUNER_PARAMETERS	= 0x04,
+	CINERGYT2_EP1_GET_TUNER_STATUS		= 0x05,
+	CINERGYT2_EP1_START_SCAN		= 0x06,
+	CINERGYT2_EP1_CONTINUE_SCAN		= 0x07,
+	CINERGYT2_EP1_GET_RC_EVENTS		= 0x08,
+	CINERGYT2_EP1_SLEEP_MODE		= 0x09,
+	CINERGYT2_EP1_GET_FIRMWARE_VERSION	= 0x0A
+};
+
+
+struct dvbt_get_status_msg {
+	uint32_t freq;
+	uint8_t bandwidth;
+	uint16_t tps;
+	uint8_t flags;
+	uint16_t gain;
+	uint8_t snr;
+	uint32_t viterbi_error_rate;
+	uint32_t rs_error_rate;
+	uint32_t uncorrected_block_count;
+	uint8_t lock_bits;
+	uint8_t prev_lock_bits;
+} __attribute__((packed));
+
+
+struct dvbt_set_parameters_msg {
+	uint8_t cmd;
+	uint32_t freq;
+	uint8_t bandwidth;
+	uint16_t tps;
+	uint8_t flags;
+} __attribute__((packed));
+
+
+extern struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d);
+
+#endif /* _DVB_USB_CINERGYT2_H_ */
+