Merge branches 'pm-cpufreq' and 'acpi-cppc'

* pm-cpufreq:
  Revert "Documentation: kernel_parameters for Intel P state driver"
  cpufreq: mediatek: fix build error
  cpufreq: intel_pstate: Add separate support for Airmont cores
  cpufreq: intel_pstate: Replace BYT with ATOM
  Revert "cpufreq: intel_pstate: Use ACPI perf configuration"
  Revert "cpufreq: intel_pstate: Avoid calculation for max/min"

* acpi-cppc:
  ACPI / CPPC: Use h/w reduced version of the PCCT structure

Documentation/kernel-parameters.txt

@@ -1583,9 +1583,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 		hwp_only
 			Only load intel_pstate on systems which support
 			hardware P state control (HWP) if available.
-		no_acpi
-			Don't use ACPI processor performance control objects
-			_PSS and _PPC specified limits.
 
 	intremap=	[X86-64, Intel-IOMMU]
 			on	enable Interrupt Remapping (default)

drivers/acpi/cppc_acpi.c

@@ -304,7 +304,7 @@ EXPORT_SYMBOL_GPL(acpi_get_psd_map);
 
 static int register_pcc_channel(int pcc_subspace_idx)
 {
-	struct acpi_pcct_subspace *cppc_ss;
+	struct acpi_pcct_hw_reduced *cppc_ss;
 	unsigned int len;
 
 	if (pcc_subspace_idx >= 0) {

drivers/cpufreq/Kconfig.arm

@@ -84,6 +84,7 @@ config ARM_KIRKWOOD_CPUFREQ
 config ARM_MT8173_CPUFREQ
 	bool "Mediatek MT8173 CPUFreq support"
 	depends on ARCH_MEDIATEK && REGULATOR
+	depends on ARM64 || (ARM_CPU_TOPOLOGY && COMPILE_TEST)
 	depends on !CPU_THERMAL || THERMAL=y
 	select PM_OPP
 	help

drivers/cpufreq/Kconfig.x86

@@ -5,7 +5,6 @@
 config X86_INTEL_PSTATE
        bool "Intel P state control"
        depends on X86
-       select ACPI_PROCESSOR if ACPI
        help
           This driver provides a P state for Intel core processors.
 	  The driver implements an internal governor and will become

drivers/cpufreq/intel_pstate.c

@@ -34,14 +34,10 @@
 #include <asm/cpu_device_id.h>
 #include <asm/cpufeature.h>
 
-#if IS_ENABLED(CONFIG_ACPI)
-#include <acpi/processor.h>
-#endif
-
-#define BYT_RATIOS		0x66a
-#define BYT_VIDS		0x66b
-#define BYT_TURBO_RATIOS	0x66c
-#define BYT_TURBO_VIDS		0x66d
+#define ATOM_RATIOS		0x66a
+#define ATOM_VIDS		0x66b
+#define ATOM_TURBO_RATIOS	0x66c
+#define ATOM_TURBO_VIDS		0x66d
 
 #define FRAC_BITS 8
 #define int_tofp(X) ((int64_t)(X) << FRAC_BITS)
@@ -117,9 +113,6 @@ struct cpudata {
 	u64	prev_mperf;
 	u64	prev_tsc;
 	struct sample sample;
-#if IS_ENABLED(CONFIG_ACPI)
-	struct acpi_processor_performance acpi_perf_data;
-#endif
 };
 
 static struct cpudata **all_cpu_data;
@@ -150,7 +143,6 @@ struct cpu_defaults {
 static struct pstate_adjust_policy pid_params;
 static struct pstate_funcs pstate_funcs;
 static int hwp_active;
-static int no_acpi_perf;
 
 struct perf_limits {
 	int no_turbo;
@@ -163,8 +155,6 @@ struct perf_limits {
 	int max_sysfs_pct;
 	int min_policy_pct;
 	int min_sysfs_pct;
-	int max_perf_ctl;
-	int min_perf_ctl;
 };
 
 static struct perf_limits performance_limits = {
@@ -191,8 +181,6 @@ static struct perf_limits powersave_limits = {
 	.max_sysfs_pct = 100,
 	.min_policy_pct = 0,
 	.min_sysfs_pct = 0,
-	.max_perf_ctl = 0,
-	.min_perf_ctl = 0,
 };
 
 #ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
@@ -201,153 +189,6 @@ static struct perf_limits *limits = &performance_limits;
 static struct perf_limits *limits = &powersave_limits;
 #endif
 
-#if IS_ENABLED(CONFIG_ACPI)
-/*
- * The max target pstate ratio is a 8 bit value in both PLATFORM_INFO MSR and
- * in TURBO_RATIO_LIMIT MSR, which pstate driver stores in max_pstate and
- * max_turbo_pstate fields. The PERF_CTL MSR contains 16 bit value for P state
- * ratio, out of it only high 8 bits are used. For example 0x1700 is setting
- * target ratio 0x17. The _PSS control value stores in a format which can be
- * directly written to PERF_CTL MSR. But in intel_pstate driver this shift
- * occurs during write to PERF_CTL (E.g. for cores core_set_pstate()).
- * This function converts the _PSS control value to intel pstate driver format
- * for comparison and assignment.
- */
-static int convert_to_native_pstate_format(struct cpudata *cpu, int index)
-{
-	return cpu->acpi_perf_data.states[index].control >> 8;
-}
-
-static int intel_pstate_init_perf_limits(struct cpufreq_policy *policy)
-{
-	struct cpudata *cpu;
-	int ret;
-	bool turbo_absent = false;
-	int max_pstate_index;
-	int min_pss_ctl, max_pss_ctl, turbo_pss_ctl;
-	int i;
-
-	cpu = all_cpu_data[policy->cpu];
-
-	pr_debug("intel_pstate: default limits 0x%x 0x%x 0x%x\n",
-		 cpu->pstate.min_pstate, cpu->pstate.max_pstate,
-		 cpu->pstate.turbo_pstate);
-
-	if (!cpu->acpi_perf_data.shared_cpu_map &&
-	    zalloc_cpumask_var_node(&cpu->acpi_perf_data.shared_cpu_map,
-				    GFP_KERNEL, cpu_to_node(policy->cpu))) {
-		return -ENOMEM;
-	}
-
-	ret = acpi_processor_register_performance(&cpu->acpi_perf_data,
-						  policy->cpu);
-	if (ret)
-		return ret;
-
-	/*
-	 * Check if the control value in _PSS is for PERF_CTL MSR, which should
-	 * guarantee that the states returned by it map to the states in our
-	 * list directly.
-	 */
-	if (cpu->acpi_perf_data.control_register.space_id !=
-						ACPI_ADR_SPACE_FIXED_HARDWARE)
-		return -EIO;
-
-	pr_debug("intel_pstate: CPU%u - ACPI _PSS perf data\n", policy->cpu);
-	for (i = 0; i < cpu->acpi_perf_data.state_count; i++)
-		pr_debug("     %cP%d: %u MHz, %u mW, 0x%x\n",
-			 (i == cpu->acpi_perf_data.state ? '*' : ' '), i,
-			 (u32) cpu->acpi_perf_data.states[i].core_frequency,
-			 (u32) cpu->acpi_perf_data.states[i].power,
-			 (u32) cpu->acpi_perf_data.states[i].control);
-
-	/*
-	 * If there is only one entry _PSS, simply ignore _PSS and continue as
-	 * usual without taking _PSS into account
-	 */
-	if (cpu->acpi_perf_data.state_count < 2)
-		return 0;
-
-	turbo_pss_ctl = convert_to_native_pstate_format(cpu, 0);
-	min_pss_ctl = convert_to_native_pstate_format(cpu,
-					cpu->acpi_perf_data.state_count - 1);
-	/* Check if there is a turbo freq in _PSS */
-	if (turbo_pss_ctl <= cpu->pstate.max_pstate &&
-	    turbo_pss_ctl > cpu->pstate.min_pstate) {
-		pr_debug("intel_pstate: no turbo range exists in _PSS\n");
-		limits->no_turbo = limits->turbo_disabled = 1;
-		cpu->pstate.turbo_pstate = cpu->pstate.max_pstate;
-		turbo_absent = true;
-	}
-
-	/* Check if the max non turbo p state < Intel P state max */
-	max_pstate_index = turbo_absent ? 0 : 1;
-	max_pss_ctl = convert_to_native_pstate_format(cpu, max_pstate_index);
-	if (max_pss_ctl < cpu->pstate.max_pstate &&
-	    max_pss_ctl > cpu->pstate.min_pstate)
-		cpu->pstate.max_pstate = max_pss_ctl;
-
-	/* check If min perf > Intel P State min */
-	if (min_pss_ctl > cpu->pstate.min_pstate &&
-	    min_pss_ctl < cpu->pstate.max_pstate) {
-		cpu->pstate.min_pstate = min_pss_ctl;
-		policy->cpuinfo.min_freq = min_pss_ctl * cpu->pstate.scaling;
-	}
-
-	if (turbo_absent)
-		policy->cpuinfo.max_freq = cpu->pstate.max_pstate *
-						cpu->pstate.scaling;
-	else {
-		policy->cpuinfo.max_freq = cpu->pstate.turbo_pstate *
-						cpu->pstate.scaling;
-		/*
-		 * The _PSS table doesn't contain whole turbo frequency range.
-		 * This just contains +1 MHZ above the max non turbo frequency,
-		 * with control value corresponding to max turbo ratio. But
-		 * when cpufreq set policy is called, it will call with this
-		 * max frequency, which will cause a reduced performance as
-		 * this driver uses real max turbo frequency as the max
-		 * frequeny. So correct this frequency in _PSS table to
-		 * correct max turbo frequency based on the turbo ratio.
-		 * Also need to convert to MHz as _PSS freq is in MHz.
-		 */
-		cpu->acpi_perf_data.states[0].core_frequency =
-						turbo_pss_ctl * 100;
-	}
-
-	pr_debug("intel_pstate: Updated limits using _PSS 0x%x 0x%x 0x%x\n",
-		 cpu->pstate.min_pstate, cpu->pstate.max_pstate,
-		 cpu->pstate.turbo_pstate);
-	pr_debug("intel_pstate: policy max_freq=%d Khz min_freq = %d KHz\n",
-		 policy->cpuinfo.max_freq, policy->cpuinfo.min_freq);
-
-	return 0;
-}
-
-static int intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
-{
-	struct cpudata *cpu;
-
-	if (!no_acpi_perf)
-		return 0;
-
-	cpu = all_cpu_data[policy->cpu];
-	acpi_processor_unregister_performance(policy->cpu);
-	return 0;
-}
-
-#else
-static int intel_pstate_init_perf_limits(struct cpufreq_policy *policy)
-{
-	return 0;
-}
-
-static int intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
-{
-	return 0;
-}
-#endif
-
 static inline void pid_reset(struct _pid *pid, int setpoint, int busy,
 			     int deadband, int integral) {
 	pid->setpoint = setpoint;
@@ -687,31 +528,31 @@ static void intel_pstate_hwp_enable(struct cpudata *cpudata)
 	wrmsrl_on_cpu(cpudata->cpu, MSR_PM_ENABLE, 0x1);
 }
 
-static int byt_get_min_pstate(void)
+static int atom_get_min_pstate(void)
 {
 	u64 value;
 
-	rdmsrl(BYT_RATIOS, value);
+	rdmsrl(ATOM_RATIOS, value);
 	return (value >> 8) & 0x7F;
 }
 
-static int byt_get_max_pstate(void)
+static int atom_get_max_pstate(void)
 {
 	u64 value;
 
-	rdmsrl(BYT_RATIOS, value);
+	rdmsrl(ATOM_RATIOS, value);
 	return (value >> 16) & 0x7F;
 }
 
-static int byt_get_turbo_pstate(void)
+static int atom_get_turbo_pstate(void)
 {
 	u64 value;
 
-	rdmsrl(BYT_TURBO_RATIOS, value);
+	rdmsrl(ATOM_TURBO_RATIOS, value);
 	return value & 0x7F;
 }
 
-static void byt_set_pstate(struct cpudata *cpudata, int pstate)
+static void atom_set_pstate(struct cpudata *cpudata, int pstate)
 {
 	u64 val;
 	int32_t vid_fp;
@@ -736,27 +577,42 @@ static void byt_set_pstate(struct cpudata *cpudata, int pstate)
 	wrmsrl_on_cpu(cpudata->cpu, MSR_IA32_PERF_CTL, val);
 }
 
-#define BYT_BCLK_FREQS 5
-static int byt_freq_table[BYT_BCLK_FREQS] = { 833, 1000, 1333, 1167, 800};
-
-static int byt_get_scaling(void)
+static int silvermont_get_scaling(void)
 {
 	u64 value;
 	int i;
+	/* Defined in Table 35-6 from SDM (Sept 2015) */
+	static int silvermont_freq_table[] = {
+		83300, 100000, 133300, 116700, 80000};
 
 	rdmsrl(MSR_FSB_FREQ, value);
-	i = value & 0x3;
+	i = value & 0x7;
+	WARN_ON(i > 4);
 
-	BUG_ON(i > BYT_BCLK_FREQS);
+	return silvermont_freq_table[i];
+}
 
-	return byt_freq_table[i] * 100;
+static int airmont_get_scaling(void)
+{
+	u64 value;
+	int i;
+	/* Defined in Table 35-10 from SDM (Sept 2015) */
+	static int airmont_freq_table[] = {
+		83300, 100000, 133300, 116700, 80000,
+		93300, 90000, 88900, 87500};
+
+	rdmsrl(MSR_FSB_FREQ, value);
+	i = value & 0xF;
+	WARN_ON(i > 8);
+
+	return airmont_freq_table[i];
 }
 
-static void byt_get_vid(struct cpudata *cpudata)
+static void atom_get_vid(struct cpudata *cpudata)
 {
 	u64 value;
 
-	rdmsrl(BYT_VIDS, value);
+	rdmsrl(ATOM_VIDS, value);
 	cpudata->vid.min = int_tofp((value >> 8) & 0x7f);
 	cpudata->vid.max = int_tofp((value >> 16) & 0x7f);
 	cpudata->vid.ratio = div_fp(
@@ -764,7 +620,7 @@ static void byt_get_vid(struct cpudata *cpudata)
 		int_tofp(cpudata->pstate.max_pstate -
 			cpudata->pstate.min_pstate));
 
-	rdmsrl(BYT_TURBO_VIDS, value);
+	rdmsrl(ATOM_TURBO_VIDS, value);
 	cpudata->vid.turbo = value & 0x7f;
 }
 
@@ -885,7 +741,7 @@ static struct cpu_defaults core_params = {
 	},
 };
 
-static struct cpu_defaults byt_params = {
+static struct cpu_defaults silvermont_params = {
 	.pid_policy = {
 		.sample_rate_ms = 10,
 		.deadband = 0,
@@ -895,13 +751,33 @@ static struct cpu_defaults byt_params = {
 		.i_gain_pct = 4,
 	},
 	.funcs = {
-		.get_max = byt_get_max_pstate,
-		.get_max_physical = byt_get_max_pstate,
-		.get_min = byt_get_min_pstate,
-		.get_turbo = byt_get_turbo_pstate,
-		.set = byt_set_pstate,
-		.get_scaling = byt_get_scaling,
-		.get_vid = byt_get_vid,
+		.get_max = atom_get_max_pstate,
+		.get_max_physical = atom_get_max_pstate,
+		.get_min = atom_get_min_pstate,
+		.get_turbo = atom_get_turbo_pstate,
+		.set = atom_set_pstate,
+		.get_scaling = silvermont_get_scaling,
+		.get_vid = atom_get_vid,
+	},
+};
+
+static struct cpu_defaults airmont_params = {
+	.pid_policy = {
+		.sample_rate_ms = 10,
+		.deadband = 0,
+		.setpoint = 60,
+		.p_gain_pct = 14,
+		.d_gain_pct = 0,
+		.i_gain_pct = 4,
+	},
+	.funcs = {
+		.get_max = atom_get_max_pstate,
+		.get_max_physical = atom_get_max_pstate,
+		.get_min = atom_get_min_pstate,
+		.get_turbo = atom_get_turbo_pstate,
+		.set = atom_set_pstate,
+		.get_scaling = airmont_get_scaling,
+		.get_vid = atom_get_vid,
 	},
 };
 
@@ -938,23 +814,12 @@ static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max)
 	 * policy, or by cpu specific default values determined through
 	 * experimentation.
 	 */
-	if (limits->max_perf_ctl && limits->max_sysfs_pct >=
-						limits->max_policy_pct) {
-		*max = limits->max_perf_ctl;
-	} else {
-		max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf),
-					limits->max_perf));
-		*max = clamp_t(int, max_perf_adj, cpu->pstate.min_pstate,
-			       cpu->pstate.turbo_pstate);
-	}
+	max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf), limits->max_perf));
+	*max = clamp_t(int, max_perf_adj,
+			cpu->pstate.min_pstate, cpu->pstate.turbo_pstate);
 
-	if (limits->min_perf_ctl) {
-		*min = limits->min_perf_ctl;
-	} else {
-		min_perf = fp_toint(mul_fp(int_tofp(max_perf),
-				    limits->min_perf));
-		*min = clamp_t(int, min_perf, cpu->pstate.min_pstate, max_perf);
-	}
+	min_perf = fp_toint(mul_fp(int_tofp(max_perf), limits->min_perf));
+	*min = clamp_t(int, min_perf, cpu->pstate.min_pstate, max_perf);
 }
 
 static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate, bool force)
@@ -1153,7 +1018,7 @@ static void intel_pstate_timer_func(unsigned long __data)
 static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
 	ICPU(0x2a, core_params),
 	ICPU(0x2d, core_params),
-	ICPU(0x37, byt_params),
+	ICPU(0x37, silvermont_params),
 	ICPU(0x3a, core_params),
 	ICPU(0x3c, core_params),
 	ICPU(0x3d, core_params),
@@ -1162,7 +1027,7 @@ static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
 	ICPU(0x45, core_params),
 	ICPU(0x46, core_params),
 	ICPU(0x47, core_params),
-	ICPU(0x4c, byt_params),
+	ICPU(0x4c, airmont_params),
 	ICPU(0x4e, core_params),
 	ICPU(0x4f, core_params),
 	ICPU(0x5e, core_params),
@@ -1229,12 +1094,6 @@ static unsigned int intel_pstate_get(unsigned int cpu_num)
 
 static int intel_pstate_set_policy(struct cpufreq_policy *policy)
 {
-#if IS_ENABLED(CONFIG_ACPI)
-	struct cpudata *cpu;
-	int i;
-#endif
-	pr_debug("intel_pstate: %s max %u policy->max %u\n", __func__,
-		 policy->cpuinfo.max_freq, policy->max);
 	if (!policy->cpuinfo.max_freq)
 		return -ENODEV;
 
@@ -1270,23 +1129,6 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
 	limits->max_perf = div_fp(int_tofp(limits->max_perf_pct),
 				  int_tofp(100));
 
-#if IS_ENABLED(CONFIG_ACPI)
-	cpu = all_cpu_data[policy->cpu];
-	for (i = 0; i < cpu->acpi_perf_data.state_count; i++) {
-		int control;
-
-		control = convert_to_native_pstate_format(cpu, i);
-		if (control * cpu->pstate.scaling == policy->max)
-			limits->max_perf_ctl = control;
-		if (control * cpu->pstate.scaling == policy->min)
-			limits->min_perf_ctl = control;
-	}
-
-	pr_debug("intel_pstate: max %u policy_max %u perf_ctl [0x%x-0x%x]\n",
-		 policy->cpuinfo.max_freq, policy->max, limits->min_perf_ctl,
-		 limits->max_perf_ctl);
-#endif
-
 	if (hwp_active)
 		intel_pstate_hwp_set();
 
@@ -1341,30 +1183,18 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy)
 	policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling;
 	policy->cpuinfo.max_freq =
 		cpu->pstate.turbo_pstate * cpu->pstate.scaling;
-	if (!no_acpi_perf)
-		intel_pstate_init_perf_limits(policy);
-	/*
-	 * If there is no acpi perf data or error, we ignore and use Intel P
-	 * state calculated limits, So this is not fatal error.
-	 */
 	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 	cpumask_set_cpu(policy->cpu, policy->cpus);
 
 	return 0;
 }
 
-static int intel_pstate_cpu_exit(struct cpufreq_policy *policy)
-{
-	return intel_pstate_exit_perf_limits(policy);
-}
-
 static struct cpufreq_driver intel_pstate_driver = {
 	.flags		= CPUFREQ_CONST_LOOPS,
 	.verify		= intel_pstate_verify_policy,
 	.setpolicy	= intel_pstate_set_policy,
 	.get		= intel_pstate_get,
 	.init		= intel_pstate_cpu_init,
-	.exit		= intel_pstate_cpu_exit,
 	.stop_cpu	= intel_pstate_stop_cpu,
 	.name		= "intel_pstate",
 };
@@ -1406,6 +1236,7 @@ static void copy_cpu_funcs(struct pstate_funcs *funcs)
 }
 
 #if IS_ENABLED(CONFIG_ACPI)
+#include <acpi/processor.h>
 
 static bool intel_pstate_no_acpi_pss(void)
 {
@@ -1601,9 +1432,6 @@ static int __init intel_pstate_setup(char *str)
 		force_load = 1;
 	if (!strcmp(str, "hwp_only"))
 		hwp_only = 1;
-	if (!strcmp(str, "no_acpi"))
-		no_acpi_perf = 1;
-
 	return 0;
 }
 early_param("intel_pstate", intel_pstate_setup);