ARM: dts: dra7: Add named interrupt property for dwc3

Add interrupt names so that the same can be used for OTG easily.
Signed-off-by: NRoger Quadros <rogerq@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/boot/dts/dra7.dtsi

@@ -1304,7 +1304,12 @@
 			usb1: usb@48890000 {
 				compatible = "snps,dwc3";
 				reg = <0x48890000 0x17000>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy1>, <&usb3_phy1>;
 				phy-names = "usb2-phy", "usb3-phy";
 				tx-fifo-resize;
@@ -1327,7 +1332,12 @@
 			usb2: usb@488d0000 {
 				compatible = "snps,dwc3";
 				reg = <0x488d0000 0x17000>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				phys = <&usb2_phy2>;
 				phy-names = "usb2-phy";
 				tx-fifo-resize;
@@ -1352,7 +1362,12 @@
 			usb3: usb@48910000 {
 				compatible = "snps,dwc3";
 				reg = <0x48910000 0x17000>;
-				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				tx-fifo-resize;
 				maximum-speed = "high-speed";
 				dr_mode = "otg";

arch/arm/boot/dts/dra74x.dtsi

@@ -65,7 +65,12 @@
 			usb4: usb@48950000 {
 				compatible = "snps,dwc3";
 				reg = <0x48950000 0x17000>;
-				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "peripheral",
+						  "host",
+						  "otg";
 				tx-fifo-resize;
 				maximum-speed = "high-speed";
 				dr_mode = "otg";