flush icache before set_pte() on ia64: flush icache at set_pte

Current ia64 kernel flushes icache by lazy_mmu_prot_update() *after*
set_pte().  This is too late.  This patch removes lazy_mmu_prot_update and
add modfied set_pte() for flushing if necessary.

This patch flush icache of a page when
	new pte has exec bit.
	&& new pte has present bit
	&& new pte is user's page.
	&& (old *ptep is not present
            || new pte's pfn is not same to old *ptep's ptn)
	&& new pte's page has no Pg_arch_1 bit.
	   Pg_arch_1 is set when a page is cache consistent.

I think this condition checks are much easier to understand than considering
"Where sync_icache_dcache() should be inserted ?".

pte_user() for ia64 was removed by http://lkml.org/lkml/2007/6/12/67 as
clean-up. So, I added it again.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Documentation/cachetlb.txt

@@ -133,12 +133,6 @@ changes occur:
 	The ia64 sn2 platform is one example of a platform
 	that uses this interface.
 
-8) void lazy_mmu_prot_update(pte_t pte)
-	This interface is called whenever the protection on
-	any user PTEs change.  This interface provides a notification
-	to architecture specific code to take appropriate action.
-
-
 Next, we have the cache flushing interfaces.  In general, when Linux
 is changing an existing virtual-->physical mapping to a new value,
 the sequence will be in one of the following forms:

arch/ia64/mm/init.c

@@ -54,15 +54,12 @@ struct page *zero_page_memmap_ptr;	/* map entry for zero page */
 EXPORT_SYMBOL(zero_page_memmap_ptr);
 
 void
-lazy_mmu_prot_update (pte_t pte)
+__ia64_sync_icache_dcache (pte_t pte)
 {
 	unsigned long addr;
 	struct page *page;
 	unsigned long order;
 
-	if (!pte_exec(pte))
-		return;				/* not an executable page... */
-
 	page = pte_page(pte);
 	addr = (unsigned long) page_address(page);
 

include/asm-generic/pgtable.h

@@ -125,10 +125,6 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addres
 #define pgd_offset_gate(mm, addr)	pgd_offset(mm, addr)
 #endif
 
-#ifndef __HAVE_ARCH_LAZY_MMU_PROT_UPDATE
-#define lazy_mmu_prot_update(pte)	do { } while (0)
-#endif
-
 #ifndef __HAVE_ARCH_MOVE_PTE
 #define move_pte(pte, prot, old_addr, new_addr)	(pte)
 #endif

include/asm-ia64/pgtable.h

@@ -223,12 +223,6 @@ ia64_phys_addr_valid (unsigned long addr)
  * page table.
  */
 
-/*
- * On some architectures, special things need to be done when setting
- * the PTE in a page table.  Nothing special needs to be on IA-64.
- */
-#define set_pte(ptep, pteval)	(*(ptep) = (pteval))
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
 
 #define VMALLOC_START		(RGN_BASE(RGN_GATE) + 0x200000000UL)
 #ifdef CONFIG_VIRTUAL_MEM_MAP
@@ -320,6 +314,36 @@ ia64_phys_addr_valid (unsigned long addr)
 #define pte_mkdirty(pte)	(__pte(pte_val(pte) | _PAGE_D))
 #define pte_mkhuge(pte)		(__pte(pte_val(pte)))
 
+/*
+ * Because ia64's Icache and Dcache is not coherent (on a cpu), we need to
+ * sync icache and dcache when we insert *new* executable page.
+ *  __ia64_sync_icache_dcache() check Pg_arch_1 bit and flush icache
+ * if necessary.
+ *
+ *  set_pte() is also called by the kernel, but we can expect that the kernel
+ *  flushes icache explicitly if necessary.
+ */
+#define pte_present_exec_user(pte)\
+	((pte_val(pte) & (_PAGE_P | _PAGE_PL_MASK | _PAGE_AR_RX)) == \
+		(_PAGE_P | _PAGE_PL_3 | _PAGE_AR_RX))
+
+extern void __ia64_sync_icache_dcache(pte_t pteval);
+static inline void set_pte(pte_t *ptep, pte_t pteval)
+{
+	/* page is present && page is user  && page is executable
+	 * && (page swapin or new page or page migraton
+	 *	|| copy_on_write with page copying.)
+	 */
+	if (pte_present_exec_user(pteval) &&
+	    (!pte_present(*ptep) ||
+		pte_pfn(*ptep) != pte_pfn(pteval)))
+		/* load_module() calles flush_icache_range() explicitly*/
+		__ia64_sync_icache_dcache(pteval);
+	*ptep = pteval;
+}
+
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
 /*
  * Make page protection values cacheable, uncacheable, or write-
  * combining.  Note that "protection" is really a misnomer here as the
@@ -489,12 +513,6 @@ extern struct page *zero_page_memmap_ptr;
 #define HUGETLB_PGDIR_MASK	(~(HUGETLB_PGDIR_SIZE-1))
 #endif
 
-/*
- * IA-64 doesn't have any external MMU info: the page tables contain all the necessary
- * information.  However, we use this routine to take care of any (delayed) i-cache
- * flushing that may be necessary.
- */
-extern void lazy_mmu_prot_update (pte_t pte);
 
 #define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
 /*
@@ -584,7 +602,7 @@ extern void lazy_mmu_prot_update (pte_t pte);
 #define __HAVE_ARCH_PTEP_SET_WRPROTECT
 #define __HAVE_ARCH_PTE_SAME
 #define __HAVE_ARCH_PGD_OFFSET_GATE
-#define __HAVE_ARCH_LAZY_MMU_PROT_UPDATE
+
 
 #ifndef CONFIG_PGTABLE_4
 #include <asm-generic/pgtable-nopud.h>

mm/hugetlb.c

@@ -355,7 +355,6 @@ static void set_huge_ptep_writable(struct vm_area_struct *vma,
 	entry = pte_mkwrite(pte_mkdirty(*ptep));
 	if (ptep_set_access_flags(vma, address, ptep, entry, 1)) {
 		update_mmu_cache(vma, address, entry);
-		lazy_mmu_prot_update(entry);
 	}
 }
 
@@ -708,7 +707,6 @@ void hugetlb_change_protection(struct vm_area_struct *vma,
 			pte = huge_ptep_get_and_clear(mm, address, ptep);
 			pte = pte_mkhuge(pte_modify(pte, newprot));
 			set_huge_pte_at(mm, address, ptep, pte);
-			lazy_mmu_prot_update(pte);
 		}
 	}
 	spin_unlock(&mm->page_table_lock);

mm/memory.c

@@ -1611,10 +1611,8 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,
 		flush_cache_page(vma, address, pte_pfn(orig_pte));
 		entry = pte_mkyoung(orig_pte);
 		entry = maybe_mkwrite(pte_mkdirty(entry), vma);
-		if (ptep_set_access_flags(vma, address, page_table, entry,1)) {
+		if (ptep_set_access_flags(vma, address, page_table, entry,1))
 			update_mmu_cache(vma, address, entry);
-			lazy_mmu_prot_update(entry);
-		}
 		ret |= VM_FAULT_WRITE;
 		goto unlock;
 	}
@@ -1650,7 +1648,6 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,
 		flush_cache_page(vma, address, pte_pfn(orig_pte));
 		entry = mk_pte(new_page, vma->vm_page_prot);
 		entry = maybe_mkwrite(pte_mkdirty(entry), vma);
-		lazy_mmu_prot_update(entry);
 		/*
 		 * Clear the pte entry and flush it first, before updating the
 		 * pte with the new entry. This will avoid a race condition
@@ -2180,7 +2177,6 @@ static int do_anonymous_page(struct mm_struct *mm, struct vm_area_struct *vma,
 
 	/* No need to invalidate - it was non-present before */
 	update_mmu_cache(vma, address, entry);
-	lazy_mmu_prot_update(entry);
 unlock:
 	pte_unmap_unlock(page_table, ptl);
 	return 0;
@@ -2333,7 +2329,6 @@ static int __do_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 
 		/* no need to invalidate: a not-present page won't be cached */
 		update_mmu_cache(vma, address, entry);
-		lazy_mmu_prot_update(entry);
 	} else {
 		if (anon)
 			page_cache_release(page);
@@ -2505,7 +2500,6 @@ static inline int handle_pte_fault(struct mm_struct *mm,
 	entry = pte_mkyoung(entry);
 	if (ptep_set_access_flags(vma, address, pte, entry, write_access)) {
 		update_mmu_cache(vma, address, entry);
-		lazy_mmu_prot_update(entry);
 	} else {
 		/*
 		 * This is needed only for protection faults but the arch code

mm/migrate.c

@@ -181,7 +181,6 @@ static void remove_migration_pte(struct vm_area_struct *vma,
 
 	/* No need to invalidate - it was non-present before */
 	update_mmu_cache(vma, addr, pte);
-	lazy_mmu_prot_update(pte);
 
 out:
 	pte_unmap_unlock(ptep, ptl);

mm/mprotect.c

@@ -53,7 +53,6 @@ static void change_pte_range(struct mm_struct *mm, pmd_t *pmd,
 			if (dirty_accountable && pte_dirty(ptent))
 				ptent = pte_mkwrite(ptent);
 			set_pte_at(mm, addr, pte, ptent);
-			lazy_mmu_prot_update(ptent);
 #ifdef CONFIG_MIGRATION
 		} else if (!pte_file(oldpte)) {
 			swp_entry_t entry = pte_to_swp_entry(oldpte);

mm/rmap.c

@@ -436,7 +436,6 @@ static int page_mkclean_one(struct page *page, struct vm_area_struct *vma)
 		entry = pte_wrprotect(entry);
 		entry = pte_mkclean(entry);
 		set_pte_at(mm, address, pte, entry);
-		lazy_mmu_prot_update(entry);
 		ret = 1;
 	}