x86: move stack_canary into irq_stack

Impact: x86_64 percpu area layout change, irq_stack now at the beginning

Now that the PDA is empty except for the stack canary, it can be removed.
The irqstack is moved to the start of the per-cpu section.  If the stack
protector is enabled, the canary overlaps the bottom 48 bytes of the irqstack.

tj: * updated subject
    * dropped asm relocation of irq_stack_ptr
    * updated comments a bit
    * rebased on top of stack canary changes
Signed-off-by: NBrian Gerst <brgerst@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

arch/x86/include/asm/pda.h

@@ -17,9 +17,6 @@ struct x8664_pda {
 	unsigned long unused4;
 	int unused5;
 	unsigned int unused6;		/* 36 was cpunumber */
-	unsigned long stack_canary;	/* 40 stack canary value */
-					/* gcc-ABI: this canary MUST be at
-					   offset 40!!! */
 	short in_bootmem;		/* pda lives in bootmem */
 } ____cacheline_aligned_in_smp;
 

arch/x86/include/asm/percpu.h

@@ -133,12 +133,6 @@ do {							\
 /* We can use this directly for local CPU (faster). */
 DECLARE_PER_CPU(unsigned long, this_cpu_off);
 
-#ifdef CONFIG_X86_64
-extern void load_pda_offset(int cpu);
-#else
-static inline void load_pda_offset(int cpu) { }
-#endif
-
 #endif /* !__ASSEMBLY__ */
 
 #ifdef CONFIG_SMP

arch/x86/include/asm/processor.h

@@ -379,8 +379,29 @@ union thread_xstate {
 #ifdef CONFIG_X86_64
 DECLARE_PER_CPU(struct orig_ist, orig_ist);
 
-DECLARE_PER_CPU(char[IRQ_STACK_SIZE], irq_stack);
+union irq_stack_union {
+	char irq_stack[IRQ_STACK_SIZE];
+	/*
+	 * GCC hardcodes the stack canary as %gs:40.  Since the
+	 * irq_stack is the object at %gs:0, we reserve the bottom
+	 * 48 bytes of the irq stack for the canary.
+	 */
+	struct {
+		char gs_base[40];
+		unsigned long stack_canary;
+	};
+};
+
+DECLARE_PER_CPU(union irq_stack_union, irq_stack_union);
 DECLARE_PER_CPU(char *, irq_stack_ptr);
+
+static inline void load_gs_base(int cpu)
+{
+	/* Memory clobbers used to order pda/percpu accesses */
+	mb();
+	wrmsrl(MSR_GS_BASE, (unsigned long)per_cpu(irq_stack_union.gs_base, cpu));
+	mb();
+}
 #endif
 
 extern void print_cpu_info(struct cpuinfo_x86 *);

arch/x86/include/asm/stackprotector.h

@@ -2,7 +2,7 @@
 #define _ASM_STACKPROTECTOR_H 1
 
 #include <asm/tsc.h>
-#include <asm/pda.h>
+#include <asm/processor.h>
 
 /*
  * Initialize the stackprotector canary value.
@@ -19,7 +19,7 @@ static __always_inline void boot_init_stack_canary(void)
 	 * Build time only check to make sure the stack_canary is at
 	 * offset 40 in the pda; this is a gcc ABI requirement
 	 */
-	BUILD_BUG_ON(offsetof(struct x8664_pda, stack_canary) != 40);
+	BUILD_BUG_ON(offsetof(union irq_stack_union, stack_canary) != 40);
 
 	/*
 	 * We both use the random pool and the current TSC as a source
@@ -32,7 +32,7 @@ static __always_inline void boot_init_stack_canary(void)
 	canary += tsc + (tsc << 32UL);
 
 	current->stack_canary = canary;
-	write_pda(stack_canary, canary);
+	percpu_write(irq_stack_union.stack_canary, canary);
 }
 
 #endif

arch/x86/include/asm/system.h

@@ -89,10 +89,10 @@ do {									\
 #ifdef CONFIG_CC_STACKPROTECTOR
 #define __switch_canary							  \
 	"movq %P[task_canary](%%rsi),%%r8\n\t"				  \
-	"movq %%r8,%%gs:%P[pda_canary]\n\t"
+	"movq %%r8,%%gs:%P[gs_canary]\n\t"
 #define __switch_canary_param						  \
 	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))  \
-	, [pda_canary] "i" (offsetof(struct x8664_pda, stack_canary))
+	, [gs_canary] "i" (offsetof(union irq_stack_union, stack_canary))
 #else	/* CC_STACKPROTECTOR */
 #define __switch_canary
 #define __switch_canary_param

arch/x86/kernel/asm-offsets_64.c

@@ -48,10 +48,6 @@ int main(void)
 #endif
 	BLANK();
 #undef ENTRY
-#define ENTRY(entry) DEFINE(pda_ ## entry, offsetof(struct x8664_pda, entry))
-	DEFINE(pda_size, sizeof(struct x8664_pda));
-	BLANK();
-#undef ENTRY
 #ifdef CONFIG_PARAVIRT
 	BLANK();
 	OFFSET(PARAVIRT_enabled, pv_info, paravirt_enabled);

arch/x86/kernel/cpu/common.c

@@ -881,12 +881,13 @@ __setup("clearcpuid=", setup_disablecpuid);
 #ifdef CONFIG_X86_64
 struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
 
-DEFINE_PER_CPU_PAGE_ALIGNED(char[IRQ_STACK_SIZE], irq_stack);
+DEFINE_PER_CPU_FIRST(union irq_stack_union,
+		     irq_stack_union) __aligned(PAGE_SIZE);
 #ifdef CONFIG_SMP
 DEFINE_PER_CPU(char *, irq_stack_ptr);	/* will be set during per cpu init */
 #else
 DEFINE_PER_CPU(char *, irq_stack_ptr) =
-	per_cpu_var(irq_stack) + IRQ_STACK_SIZE - 64;
+	per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
 #endif
 
 DEFINE_PER_CPU(unsigned long, kernel_stack) =
@@ -960,7 +961,7 @@ void __cpuinit cpu_init(void)
 
 	loadsegment(fs, 0);
 	loadsegment(gs, 0);
-	load_pda_offset(cpu);
+	load_gs_base(cpu);
 
 #ifdef CONFIG_NUMA
 	if (cpu != 0 && percpu_read(node_number) == 0 &&

arch/x86/kernel/head_64.S

@@ -242,13 +242,10 @@ ENTRY(secondary_startup_64)
 
 	/* Set up %gs.
 	 *
-	 * On SMP, %gs should point to the per-cpu area.  For initial
-	 * boot, make %gs point to the init data section.  For a
-	 * secondary CPU,initial_gs should be set to its pda address
-	 * before the CPU runs this code.
-	 *
-	 * On UP, initial_gs points to PER_CPU_VAR(__pda) and doesn't
-	 * change.
+	 * The base of %gs always points to the bottom of the irqstack
+	 * union.  If the stack protector canary is enabled, it is
+	 * located at %gs:40.  Note that, on SMP, the boot cpu uses
+	 * init data section till per cpu areas are set up.
 	 */
 	movl	$MSR_GS_BASE,%ecx
 	movq	initial_gs(%rip),%rax
@@ -281,7 +278,7 @@ ENTRY(secondary_startup_64)
 #ifdef CONFIG_SMP
 	.quad	__per_cpu_load
 #else
-	.quad	PER_CPU_VAR(__pda)
+	.quad	PER_CPU_VAR(irq_stack_union)
 #endif
 	__FINITDATA
 

arch/x86/kernel/setup_percpu.c

@@ -77,30 +77,6 @@ static void __init setup_node_to_cpumask_map(void);
 static inline void setup_node_to_cpumask_map(void) { }
 #endif
 
-/*
- * Define load_pda_offset() and per-cpu __pda for x86_64.
- * load_pda_offset() is responsible for loading the offset of pda into
- * %gs.
- *
- * On SMP, pda offset also duals as percpu base address and thus it
- * should be at the start of per-cpu area.  To achieve this, it's
- * preallocated in vmlinux_64.lds.S directly instead of using
- * DEFINE_PER_CPU().
- */
-#ifdef CONFIG_X86_64
-void __cpuinit load_pda_offset(int cpu)
-{
-	/* Memory clobbers used to order pda/percpu accesses */
-	mb();
-	wrmsrl(MSR_GS_BASE, cpu_pda(cpu));
-	mb();
-}
-#ifndef CONFIG_SMP
-DEFINE_PER_CPU(struct x8664_pda, __pda);
-#endif
-EXPORT_PER_CPU_SYMBOL(__pda);
-#endif /* CONFIG_SMP && CONFIG_X86_64 */
-
 #ifdef CONFIG_X86_64
 
 /* correctly size the local cpu masks */
@@ -207,15 +183,13 @@ void __init setup_per_cpu_areas(void)
 		per_cpu(cpu_number, cpu) = cpu;
 #ifdef CONFIG_X86_64
 		per_cpu(irq_stack_ptr, cpu) =
-			(char *)per_cpu(irq_stack, cpu) + IRQ_STACK_SIZE - 64;
+			per_cpu(irq_stack_union.irq_stack, cpu) + IRQ_STACK_SIZE - 64;
 		/*
-		 * CPU0 modified pda in the init data area, reload pda
-		 * offset for CPU0 and clear the area for others.
+		 * Up to this point, CPU0 has been using .data.init
+		 * area.  Reload %gs offset for CPU0.
 		 */
 		if (cpu == 0)
-			load_pda_offset(0);
-		else
-			memset(cpu_pda(cpu), 0, sizeof(*cpu_pda(cpu)));
+			load_gs_base(cpu);
 #endif
 
 		DBG("PERCPU: cpu %4d %p\n", cpu, ptr);

arch/x86/kernel/vmlinux_64.lds.S

@@ -220,8 +220,7 @@ SECTIONS
    * so that it can be accessed as a percpu variable.
    */
   . = ALIGN(PAGE_SIZE);
-  PERCPU_VADDR_PREALLOC(0, :percpu, pda_size)
-  per_cpu____pda = __per_cpu_start;
+  PERCPU_VADDR(0, :percpu)
 #else
   PERCPU(PAGE_SIZE)
 #endif
@@ -262,3 +261,8 @@ SECTIONS
  */
 ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
 	"kernel image bigger than KERNEL_IMAGE_SIZE")
+
+#ifdef CONFIG_SMP
+ASSERT((per_cpu__irq_stack_union == 0),
+        "irq_stack_union is not at start of per-cpu area");
+#endif