OMAP2xxx: clock: add clockfw autoidle support for APLLs

OMAP2xxx devices have two on-chip APLLs.  These APLLs can
automatically enter idle when not in use.  Connect the APLL autoidle
code to the clock code, so that the clock framework can handle this
process.  As part of this patch, remove the code in mach-omap2/pm24xx.c
that previously handled APLL autoidle control.
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Tested-by: NRajendra Nayak <rnayak@ti.com>
Reviewed-by: NKevin Hilman <khilman@ti.com>

arch/arm/mach-omap2/clkt2xxx_apll.c

@@ -78,6 +78,26 @@ static int omap2_clk_apll54_enable(struct clk *clk)
 	return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL_MASK);
 }
 
+static void _apll96_allow_idle(struct clk *clk)
+{
+	omap2xxx_cm_set_apll96_auto_low_power_stop();
+}
+
+static void _apll96_deny_idle(struct clk *clk)
+{
+	omap2xxx_cm_set_apll96_disable_autoidle();
+}
+
+static void _apll54_allow_idle(struct clk *clk)
+{
+	omap2xxx_cm_set_apll54_auto_low_power_stop();
+}
+
+static void _apll54_deny_idle(struct clk *clk)
+{
+	omap2xxx_cm_set_apll54_disable_autoidle();
+}
+
 /* Stop APLL */
 static void omap2_clk_apll_disable(struct clk *clk)
 {
@@ -93,11 +113,15 @@ static void omap2_clk_apll_disable(struct clk *clk)
 const struct clkops clkops_apll96 = {
 	.enable		= omap2_clk_apll96_enable,
 	.disable	= omap2_clk_apll_disable,
+	.allow_idle	= _apll96_allow_idle,
+	.deny_idle	= _apll96_deny_idle,
 };
 
 const struct clkops clkops_apll54 = {
 	.enable		= omap2_clk_apll54_enable,
 	.disable	= omap2_clk_apll_disable,
+	.allow_idle	= _apll54_allow_idle,
+	.deny_idle	= _apll54_deny_idle,
 };
 
 /* Public functions */

arch/arm/mach-omap2/cm2xxx_3xxx.c

@@ -25,10 +25,14 @@
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
 
-/* CM_AUTOIDLE_PLL.AUTO_* bit values */
+/* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */
 #define DPLL_AUTOIDLE_DISABLE				0x0
 #define OMAP2XXX_DPLL_AUTOIDLE_LOW_POWER_STOP		0x3
 
+/* CM_AUTOIDLE_PLL.AUTO_* bit values for APLLs (OMAP2xxx only) */
+#define OMAP2XXX_APLL_AUTOIDLE_DISABLE			0x0
+#define OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP		0x3
+
 static const u8 cm_idlest_offs[] = {
 	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
 };
@@ -153,6 +157,44 @@ void omap2xxx_cm_set_dpll_auto_low_power_stop(void)
 	_omap2xxx_set_dpll_autoidle(DPLL_AUTOIDLE_DISABLE);
 }
 
+/*
+ * APLL autoidle control
+ */
+
+static void _omap2xxx_set_apll_autoidle(u8 m, u32 mask)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
+	v &= ~mask;
+	v |= m << __ffs(mask);
+	omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
+}
+
+void omap2xxx_cm_set_apll54_disable_autoidle(void)
+{
+	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
+				    OMAP24XX_AUTO_54M_MASK);
+}
+
+void omap2xxx_cm_set_apll54_auto_low_power_stop(void)
+{
+	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
+				    OMAP24XX_AUTO_54M_MASK);
+}
+
+void omap2xxx_cm_set_apll96_disable_autoidle(void)
+{
+	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_LOW_POWER_STOP,
+				    OMAP24XX_AUTO_96M_MASK);
+}
+
+void omap2xxx_cm_set_apll96_auto_low_power_stop(void)
+{
+	_omap2xxx_set_apll_autoidle(OMAP2XXX_APLL_AUTOIDLE_DISABLE,
+				    OMAP24XX_AUTO_96M_MASK);
+}
+
 /*
  *
  */

arch/arm/mach-omap2/cm2xxx_3xxx.h

@@ -125,6 +125,11 @@ extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
 extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
 extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
 
+extern void omap2xxx_cm_set_apll54_disable_autoidle(void);
+extern void omap2xxx_cm_set_apll54_auto_low_power_stop(void);
+extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
+extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
+
 #endif
 
 /* CM register bits shared between 24XX and 3430 */

arch/arm/mach-omap2/pm24xx.c

@@ -378,7 +378,6 @@ static void __init prcm_setup_regs(void)
 {
 	int i, num_mem_banks;
 	struct powerdomain *pwrdm;
-	u32 v;
 
 	/* Enable autoidle */
 	omap2_prm_write_mod_reg(OMAP24XX_AUTOIDLE_MASK, OCP_MOD,
@@ -469,13 +468,6 @@ static void __init prcm_setup_regs(void)
 	omap2_cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI_MASK, OMAP24XX_DSP_MOD,
 			       CM_AUTOIDLE);
 
-	/* Put both APLLs into autoidle mode */
-	v = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
-	v &= ~(OMAP24XX_AUTO_96M_MASK | OMAP24XX_AUTO_54M_SHIFT);
-	v |= (0x03 << OMAP24XX_AUTO_96M_SHIFT) |
-		(0x03 << OMAP24XX_AUTO_54M_SHIFT);
-	omap2_cm_write_mod_reg(v, PLL_MOD, CM_AUTOIDLE);
-
 	omap2_cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL_MASK |
 			       OMAP24XX_AUTO_WDT1_MASK |
 			       OMAP24XX_AUTO_MPU_WDT_MASK |