Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 91dd6c27 编写于 作者: F Frans Pop 提交者： Reinette Chatre
浏览文件
操作

iwlwifi: remove trailing space in messages 

Includes minor improvements in debugging messages in iwl-4965.c,
function iwl4965_is_temp_calib_needed().
Signed-off-by: NFrans Pop <elendil@planet.nl>
Cc: Zhu Yi <yi.zhu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Intel Linux Wireless <ilw@linux.intel.com>
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
上级 b744cb79
隐藏空白更改
内联 并排
Showing with 36 addition and 36 deletion
drivers/net/wireless/iwlwifi/iwl-3945-rs.c
浏览文件 @ 91dd6c27
......@@ -341,7 +341,7 @@ void iwl3945_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 s
struct ieee80211_supported_band *sband;
int i;
IWL_DEBUG_INFO(priv, "enter \n");
IWL_DEBUG_INFO(priv, "enter\n");
if (sta_id == priv->hw_params.bcast_sta_id)
goto out;
......
drivers/net/wireless/iwlwifi/iwl-3945.c
浏览文件 @ 91dd6c27
......@@ -486,7 +486,7 @@ static void _iwl3945_dbg_report_frame(struct iwl_priv *priv,
* but you can hack it to show more, if you'd like to. */
if (dataframe)
IWL_DEBUG_RX(priv, "%s: mhd=0x%04x, dst=0x%02x, "
"len=%u, rssi=%d, chnl=%d, rate=%d, \n",
"len=%u, rssi=%d, chnl=%d, rate=%d,\n",
title, le16_to_cpu(fc), header->addr1[5],
length, rssi, channel, rate);
else {
......@@ -998,7 +998,7 @@ static void iwl3945_nic_config(struct iwl_priv *priv)
IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
IWL_DEBUG_INFO(priv, "RTP type \n");
IWL_DEBUG_INFO(priv, "RTP type\n");
else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
IWL_DEBUG_INFO(priv, "3945 RADIO-MB type\n");
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
......
drivers/net/wireless/iwlwifi/iwl-4965.c
浏览文件 @ 91dd6c27
......@@ -410,7 +410,7 @@ static void iwl4965_gain_computation(struct iwl_priv *priv,
sizeof(cmd), &cmd);
if (ret)
IWL_DEBUG_CALIB(priv, "fail sending cmd "
"REPLY_PHY_CALIBRATION_CMD \n");
"REPLY_PHY_CALIBRATION_CMD\n");
/* TODO we might want recalculate
* rx_chain in rxon cmd */
......@@ -1612,19 +1612,19 @@ static int iwl4965_is_temp_calib_needed(struct iwl_priv *priv)
/* get absolute value */
if (temp_diff < 0) {
IWL_DEBUG_POWER(priv, "Getting cooler, delta %d, \n", temp_diff);
IWL_DEBUG_POWER(priv, "Getting cooler, delta %d\n", temp_diff);
temp_diff = -temp_diff;
} else if (temp_diff == 0)
IWL_DEBUG_POWER(priv, "Same temp, \n");
IWL_DEBUG_POWER(priv, "Temperature unchanged\n");
else
IWL_DEBUG_POWER(priv, "Getting warmer, delta %d, \n", temp_diff);
IWL_DEBUG_POWER(priv, "Getting warmer, delta %d\n", temp_diff);
if (temp_diff < IWL_TEMPERATURE_THRESHOLD) {
IWL_DEBUG_POWER(priv, "Thermal txpower calib not needed\n");
IWL_DEBUG_POWER(priv, " => thermal txpower calib not needed\n");
return 0;
}
IWL_DEBUG_POWER(priv, "Thermal txpower calib needed\n");
IWL_DEBUG_POWER(priv, " => thermal txpower calib needed\n");
return 1;
}
......
drivers/net/wireless/iwlwifi/iwl-agn-lib.c
浏览文件 @ 91dd6c27
......@@ -851,7 +851,7 @@ static void iwlagn_dbg_report_frame(struct iwl_priv *priv,
* but you can hack it to show more, if you'd like to. */
if (dataframe)
IWL_DEBUG_RX(priv, "%s: mhd=0x%04x, dst=0x%02x, "
"len=%u, rssi=%d, chnl=%d, rate=%u, \n",
"len=%u, rssi=%d, chnl=%d, rate=%u,\n",
title, le16_to_cpu(fc), header->addr1[5],
length, rssi, channel, bitrate);
else {
......
drivers/net/wireless/iwlwifi/iwl-agn-rs.c
浏览文件 @ 91dd6c27
......@@ -2009,7 +2009,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
/* rates available for this association, and for modulation mode */
rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type);
IWL_DEBUG_RATE(priv, "mask 0x%04X \n", rate_mask);
IWL_DEBUG_RATE(priv, "mask 0x%04X\n", rate_mask);
/* mask with station rate restriction */
if (is_legacy(tbl->lq_type)) {
......
drivers/net/wireless/iwlwifi/iwl-agn-tx.c
浏览文件 @ 91dd6c27
......@@ -723,9 +723,9 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys);
IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
IWL_DEBUG_TX(priv, "sequence nr = 0X%x\n",
le16_to_cpu(out_cmd->hdr.sequence));
IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags));
IWL_DEBUG_TX(priv, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd, sizeof(*tx_cmd));
iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
......@@ -1289,7 +1289,7 @@ void iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv,
(unsigned long long)le64_to_cpu(ba_resp->bitmap),
ba_resp->scd_flow,
ba_resp->scd_ssn);
IWL_DEBUG_TX_REPLY(priv, "DAT start_idx = %d, bitmap = 0x%llx \n",
IWL_DEBUG_TX_REPLY(priv, "DAT start_idx = %d, bitmap = 0x%llx\n",
agg->start_idx,
(unsigned long long)agg->bitmap);
......
drivers/net/wireless/iwlwifi/iwl-agn.c
浏览文件 @ 91dd6c27
......@@ -181,7 +181,7 @@ int iwl_commit_rxon(struct iwl_priv *priv)
IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
return ret;
}
IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON. \n");
IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON.\n");
memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
iwl_clear_ucode_stations(priv, false);
iwl_restore_stations(priv);
......@@ -2303,7 +2303,7 @@ static int iwl_prepare_card_hw(struct iwl_priv *priv)
{
int ret = 0;
IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter \n");
IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter\n");
ret = iwl_set_hw_ready(priv);
if (priv->hw_ready)
......@@ -3067,7 +3067,7 @@ static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
iwl_restore_wepkeys(priv);
/* Initialize rate scaling */
IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM \n",
IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
sta->addr);
iwl_rs_rate_init(priv, sta, sta_id);
......
drivers/net/wireless/iwlwifi/iwl-calib.c
浏览文件 @ 91dd6c27
......@@ -592,7 +592,7 @@ void iwl_sensitivity_calibration(struct iwl_priv *priv,
IWL_DEBUG_CALIB(priv, "rx_enable_time = %u usecs\n", rx_enable_time);
if (!rx_enable_time) {
IWL_DEBUG_CALIB(priv, "<< RX Enable Time == 0! \n");
IWL_DEBUG_CALIB(priv, "<< RX Enable Time == 0!\n");
return;
}
......
drivers/net/wireless/iwlwifi/iwl-core.c
浏览文件 @ 91dd6c27
......@@ -1801,7 +1801,7 @@ static void iwl_ht_conf(struct iwl_priv *priv,
struct iwl_ht_config *ht_conf = &priv->current_ht_config;
struct ieee80211_sta *sta;
IWL_DEBUG_MAC80211(priv, "enter: \n");
IWL_DEBUG_MAC80211(priv, "enter:\n");
if (!ht_conf->is_ht)
return;
......@@ -2366,7 +2366,7 @@ int iwl_alloc_txq_mem(struct iwl_priv *priv)
sizeof(struct iwl_tx_queue) * priv->cfg->num_of_queues,
GFP_KERNEL);
if (!priv->txq) {
IWL_ERR(priv, "Not enough memory for txq \n");
IWL_ERR(priv, "Not enough memory for txq\n");
return -ENOMEM;
}
return 0;
......
drivers/net/wireless/iwlwifi/iwl-hcmd.c
浏览文件 @ 91dd6c27
......@@ -169,7 +169,7 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
mutex_lock(&priv->sync_cmd_mutex);
set_bit(STATUS_HCMD_ACTIVE, &priv->status);
IWL_DEBUG_INFO(priv, "Setting HCMD_ACTIVE for command %s \n",
IWL_DEBUG_INFO(priv, "Setting HCMD_ACTIVE for command %s\n",
get_cmd_string(cmd->id));
cmd_idx = iwl_enqueue_hcmd(priv, cmd);
......@@ -191,7 +191,7 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
jiffies_to_msecs(HOST_COMPLETE_TIMEOUT));
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s \n",
IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s\n",
get_cmd_string(cmd->id));
ret = -ETIMEDOUT;
goto cancel;
......
drivers/net/wireless/iwlwifi/iwl-io.h
浏览文件 @ 91dd6c27
......@@ -297,7 +297,7 @@ static inline u32 __iwl_read_direct32(const char *f, u32 l,
struct iwl_priv *priv, u32 reg)
{
u32 value = _iwl_read_direct32(priv, reg);
IWL_DEBUG_IO(priv, "read_direct32(0x%4X) = 0x%08x - %s %d \n", reg, value,
IWL_DEBUG_IO(priv, "read_direct32(0x%4X) = 0x%08x - %s %d\n", reg, value,
f, l);
return value;
}
......
drivers/net/wireless/iwlwifi/iwl-power.c
浏览文件 @ 91dd6c27
......@@ -874,7 +874,7 @@ void iwl_tt_initialize(struct iwl_priv *priv)
int size = sizeof(struct iwl_tt_trans) * (IWL_TI_STATE_MAX - 1);
struct iwl_tt_trans *transaction;
IWL_DEBUG_POWER(priv, "Initialize Thermal Throttling \n");
IWL_DEBUG_POWER(priv, "Initialize Thermal Throttling\n");
memset(tt, 0, sizeof(struct iwl_tt_mgmt));
......
drivers/net/wireless/iwlwifi/iwl-scan.c
浏览文件 @ 91dd6c27
......@@ -453,7 +453,7 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv,
added++;
}
IWL_DEBUG_SCAN(priv, "total channels to scan %d \n", added);
IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
return added;
}
......
drivers/net/wireless/iwlwifi/iwl-sta.c
浏览文件 @ 91dd6c27
......@@ -71,7 +71,7 @@ u8 iwl_find_station(struct iwl_priv *priv, const u8 *addr)
(!(priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) ||
((priv->stations[ret].used & IWL_STA_UCODE_ACTIVE) &&
(priv->stations[ret].used & IWL_STA_UCODE_INPROGRESS)))) {
IWL_ERR(priv, "Requested station info for sta %d before ready. \n",
IWL_ERR(priv, "Requested station info for sta %d before ready.\n",
ret);
ret = IWL_INVALID_STATION;
}
......@@ -143,7 +143,7 @@ static void iwl_process_add_sta_resp(struct iwl_priv *priv,
sta_id);
break;
case ADD_STA_MODIFY_NON_EXIST_STA:
IWL_ERR(priv, "Attempting to modify non-existing station %d \n",
IWL_ERR(priv, "Attempting to modify non-existing station %d\n",
sta_id);
break;
default:
......@@ -571,7 +571,7 @@ static int iwl_remove_station(struct iwl_priv *priv, struct ieee80211_sta *sta)
if (!iwl_is_ready(priv)) {
IWL_DEBUG_INFO(priv,
"Unable to remove station %pM, device not ready. \n",
"Unable to remove station %pM, device not ready.\n",
sta->addr);
/*
* It is typical for stations to be removed when we are
......@@ -668,7 +668,7 @@ void iwl_clear_ucode_stations(struct iwl_priv *priv, bool force)
} else {
for (i = 0; i < priv->hw_params.max_stations; i++) {
if (priv->stations[i].used & IWL_STA_UCODE_ACTIVE) {
IWL_DEBUG_INFO(priv, "Clearing ucode active for station %d \n", i);
IWL_DEBUG_INFO(priv, "Clearing ucode active for station %d\n", i);
priv->stations[i].used &= ~IWL_STA_UCODE_ACTIVE;
cleared = true;
}
......@@ -1105,7 +1105,7 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv,
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
if (iwl_is_rfkill(priv)) {
IWL_DEBUG_WEP(priv, "Not sending REPLY_ADD_STA command because RFKILL enabled. \n");
IWL_DEBUG_WEP(priv, "Not sending REPLY_ADD_STA command because RFKILL enabled.\n");
spin_unlock_irqrestore(&priv->sta_lock, flags);
return 0;
}
......@@ -1207,7 +1207,7 @@ int iwl_send_lq_cmd(struct iwl_priv *priv,
return ret;
if (init) {
IWL_DEBUG_INFO(priv, "init LQ command complete, clearing sta addition status for sta %d \n",
IWL_DEBUG_INFO(priv, "init LQ command complete, clearing sta addition status for sta %d\n",
lq->sta_id);
spin_lock_irqsave(&priv->sta_lock, flags_spin);
priv->stations[lq->sta_id].used &= ~IWL_STA_UCODE_INPROGRESS;
......
drivers/net/wireless/iwlwifi/iwl-tx.c
浏览文件 @ 91dd6c27
......@@ -579,7 +579,7 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
if (!(meta->flags & CMD_ASYNC)) {
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s \n",
IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s\n",
get_cmd_string(cmd->hdr.cmd));
wake_up_interruptible(&priv->wait_command_queue);
}
......
drivers/net/wireless/iwlwifi/iwl3945-base.c
浏览文件 @ 91dd6c27
......@@ -597,9 +597,9 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
txq->need_update = 0;
}
IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
IWL_DEBUG_TX(priv, "sequence nr = 0X%x\n",
le16_to_cpu(out_cmd->hdr.sequence));
IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags));
IWL_DEBUG_TX(priv, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
iwl_print_hex_dump(priv, IWL_DL_TX, tx_cmd, sizeof(*tx_cmd));
iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr,
ieee80211_hdrlen(fc));
......@@ -1937,7 +1937,7 @@ static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
added++;
}
IWL_DEBUG_SCAN(priv, "total channels to scan %d \n", added);
IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
return added;
}
......@@ -3401,7 +3401,7 @@ static int iwl3945_mac_sta_add(struct ieee80211_hw *hw,
}
/* Initialize rate scaling */
IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM \n",
IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
sta->addr);
iwl3945_rs_rate_init(priv, sta, sta_id);
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或