[MIPS] Consolidate all variants of MIPS cp0 timer interrupt handlers.

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/au1000/common/irq.c

@@ -65,8 +65,6 @@
 #define EXT_INTC1_REQ1 5 /* IP 5 */
 #define MIPS_TIMER_IP  7 /* IP 7 */
 
-extern void mips_timer_interrupt(void);
-
 void	(*board_init_irq)(void);
 
 static DEFINE_SPINLOCK(irq_lock);
@@ -635,7 +633,7 @@ asmlinkage void plat_irq_dispatch(void)
 	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
 
 	if (pending & CAUSEF_IP7)
-		mips_timer_interrupt();
+		ll_timer_interrupt(63);
 	else if (pending & CAUSEF_IP2)
 		intc0_req0_irqdispatch();
 	else if (pending & CAUSEF_IP3)

arch/mips/au1000/common/time.c

@@ -64,48 +64,8 @@ static unsigned long last_pc0, last_match20;
 
 static DEFINE_SPINLOCK(time_lock);
 
-static inline void ack_r4ktimer(unsigned long newval)
-{
-	write_c0_compare(newval);
-}
-
-/*
- * There are a lot of conceptually broken versions of the MIPS timer interrupt
- * handler floating around.  This one is rather different, but the algorithm
- * is provably more robust.
- */
 unsigned long wtimer;
 
-void mips_timer_interrupt(void)
-{
-	int irq = 63;
-
-	irq_enter();
-	kstat_this_cpu.irqs[irq]++;
-
-	if (r4k_offset == 0)
-		goto null;
-
-	do {
-		kstat_this_cpu.irqs[irq]++;
-		do_timer(1);
-#ifndef CONFIG_SMP
-		update_process_times(user_mode(get_irq_regs()));
-#endif
-		r4k_cur += r4k_offset;
-		ack_r4ktimer(r4k_cur);
-
-	} while (((unsigned long)read_c0_count()
-	         - r4k_cur) < 0x7fffffff);
-
-	irq_exit();
-	return;
-
-null:
-	ack_r4ktimer(0);
-	irq_exit();
-}
-
 #ifdef CONFIG_PM
 irqreturn_t counter0_irq(int irq, void *dev_id)
 {

arch/mips/kernel/smtc.c

@@ -867,7 +867,7 @@ void ipi_decode(struct smtc_ipi *pipi)
 #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
 		clock_hang_reported[dest_copy] = 0;
 #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
-		local_timer_interrupt(0, NULL);
+		local_timer_interrupt(0);
 		irq_exit();
 		break;
 	case LINUX_SMP_IPI:

arch/mips/kernel/time.c

@@ -144,7 +144,7 @@ void local_timer_interrupt(int irq, void *dev_id)
  * High-level timer interrupt service routines.  This function
  * is set as irqaction->handler and is invoked through do_IRQ.
  */
-irqreturn_t timer_interrupt(int irq, void *dev_id)
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	write_seqlock(&xtime_lock);
 
@@ -174,9 +174,10 @@ int null_perf_irq(void)
 	return 0;
 }
 
+EXPORT_SYMBOL(null_perf_irq);
+
 int (*perf_irq)(void) = null_perf_irq;
 
-EXPORT_SYMBOL(null_perf_irq);
 EXPORT_SYMBOL(perf_irq);
 
 /*
@@ -208,35 +209,79 @@ static inline int handle_perf_irq (int r2)
 		!r2;
 }
 
-asmlinkage void ll_timer_interrupt(int irq)
+void ll_timer_interrupt(int irq, void *dev_id)
 {
-	int r2 = cpu_has_mips_r2;
+	int cpu = smp_processor_id();
 
-	irq_enter();
-	kstat_this_cpu.irqs[irq]++;
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 *  In an SMTC system, one Count/Compare set exists per VPE.
+	 *  Which TC within a VPE gets the interrupt is essentially
+	 *  random - we only know that it shouldn't be one with
+	 *  IXMT set. Whichever TC gets the interrupt needs to
+	 *  send special interprocessor interrupts to the other
+	 *  TCs to make sure that they schedule, etc.
+	 *
+	 *  That code is specific to the SMTC kernel, not to
+	 *  the a particular platform, so it's invoked from
+	 *  the general MIPS timer_interrupt routine.
+	 */
+
+	/*
+	 * We could be here due to timer interrupt,
+	 * perf counter overflow, or both.
+	 */
+	(void) handle_perf_irq(1);
+
+	if (read_c0_cause() & (1 << 30)) {
+		/*
+		 * There are things we only want to do once per tick
+		 * in an "MP" system.   One TC of each VPE will take
+		 * the actual timer interrupt.  The others will get
+		 * timer broadcast IPIs. We use whoever it is that takes
+		 * the tick on VPE 0 to run the full timer_interrupt().
+		 */
+		if (cpu_data[cpu].vpe_id == 0) {
+			timer_interrupt(irq, NULL);
+		} else {
+			write_c0_compare(read_c0_count() +
+			                 (mips_hpt_frequency/HZ));
+			local_timer_interrupt(irq, dev_id);
+		}
+		smtc_timer_broadcast(cpu_data[cpu].vpe_id);
+	}
+#else /* CONFIG_MIPS_MT_SMTC */
+	int r2 = cpu_has_mips_r2;
 
 	if (handle_perf_irq(r2))
-		goto out;
+		return;
 
 	if (r2 && ((read_c0_cause() & (1 << 30)) == 0))
-		goto out;
-
-	timer_interrupt(irq, NULL);
-
-out:
-	irq_exit();
-}
-
-asmlinkage void ll_local_timer_interrupt(int irq)
-{
-	irq_enter();
-	if (smp_processor_id() != 0)
-		kstat_this_cpu.irqs[irq]++;
-
-	/* we keep interrupt disabled all the time */
-	local_timer_interrupt(irq, NULL);
+		return;
 
-	irq_exit();
+	if (cpu == 0) {
+		/*
+		 * CPU 0 handles the global timer interrupt job and process
+		 * accounting resets count/compare registers to trigger next
+		 * timer int.
+		 */
+		timer_interrupt(irq, NULL);
+	} else {
+		/* Everyone else needs to reset the timer int here as
+		   ll_local_timer_interrupt doesn't */
+		/*
+		 * FIXME: need to cope with counter underflow.
+		 * More support needs to be added to kernel/time for
+		 * counter/timer interrupts on multiple CPU's
+		 */
+		write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
+
+		/*
+		 * Other CPUs should do profiling and process accounting
+		 */
+		local_timer_interrupt(irq, dev_id);
+	}
+#endif /* CONFIG_MIPS_MT_SMTC */
 }
 
 /*

arch/mips/mips-boards/generic/time.c

@@ -67,108 +67,6 @@ static void mips_perf_dispatch(void)
 	do_IRQ(cp0_perfcount_irq);
 }
 
-/*
- * Redeclare until I get around mopping the timer code insanity on MIPS.
- */
-extern int null_perf_irq(void);
-
-extern int (*perf_irq)(void);
-
-/*
- * Possibly handle a performance counter interrupt.
- * Return true if the timer interrupt should not be checked
- */
-static inline int handle_perf_irq (int r2)
-{
-	/*
-	 * The performance counter overflow interrupt may be shared with the
-	 * timer interrupt (cp0_perfcount_irq < 0). If it is and a
-	 * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
-	 * and we can't reliably determine if a counter interrupt has also
-	 * happened (!r2) then don't check for a timer interrupt.
-	 */
-	return (cp0_perfcount_irq < 0) &&
-		perf_irq() == IRQ_HANDLED &&
-		!r2;
-}
-
-irqreturn_t mips_timer_interrupt(int irq, void *dev_id)
-{
-	int cpu = smp_processor_id();
-
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 *  In an SMTC system, one Count/Compare set exists per VPE.
-	 *  Which TC within a VPE gets the interrupt is essentially
-	 *  random - we only know that it shouldn't be one with
-	 *  IXMT set. Whichever TC gets the interrupt needs to
-	 *  send special interprocessor interrupts to the other
-	 *  TCs to make sure that they schedule, etc.
-	 *
-	 *  That code is specific to the SMTC kernel, not to
-	 *  the a particular platform, so it's invoked from
-	 *  the general MIPS timer_interrupt routine.
-	 */
-
-	/*
-	 * We could be here due to timer interrupt,
-	 * perf counter overflow, or both.
-	 */
-	(void) handle_perf_irq(1);
-
-	if (read_c0_cause() & (1 << 30)) {
-		/*
-		 * There are things we only want to do once per tick
-		 * in an "MP" system.   One TC of each VPE will take
-		 * the actual timer interrupt.  The others will get
-		 * timer broadcast IPIs. We use whoever it is that takes
-		 * the tick on VPE 0 to run the full timer_interrupt().
-		 */
-		if (cpu_data[cpu].vpe_id == 0) {
-			timer_interrupt(irq, NULL);
-		} else {
-			write_c0_compare(read_c0_count() +
-			                 (mips_hpt_frequency/HZ));
-			local_timer_interrupt(irq, dev_id);
-		}
-		smtc_timer_broadcast();
-	}
-#else /* CONFIG_MIPS_MT_SMTC */
-	int r2 = cpu_has_mips_r2;
-
-	if (handle_perf_irq(r2))
-		goto out;
-
-	if (r2 && ((read_c0_cause() & (1 << 30)) == 0))
-		goto out;
-
-	if (cpu == 0) {
-		/*
-		 * CPU 0 handles the global timer interrupt job and process
-		 * accounting resets count/compare registers to trigger next
-		 * timer int.
-		 */
-		timer_interrupt(irq, NULL);
-	} else {
-		/* Everyone else needs to reset the timer int here as
-		   ll_local_timer_interrupt doesn't */
-		/*
-		 * FIXME: need to cope with counter underflow.
-		 * More support needs to be added to kernel/time for
-		 * counter/timer interrupts on multiple CPU's
-		 */
-		write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
-
-		/*
-		 * Other CPUs should do profiling and process accounting
-		 */
-		local_timer_interrupt(irq, dev_id);
-	}
-out:
-#endif /* CONFIG_MIPS_MT_SMTC */
-	return IRQ_HANDLED;
-}
-
 /*
  * Estimate CPU frequency.  Sets mips_hpt_frequency as a side-effect
  */
@@ -246,7 +144,7 @@ void __init plat_time_init(void)
 	mips_scroll_message();
 }
 
-irqreturn_t mips_perf_interrupt(int irq, void *dev_id)
+static irqreturn_t mips_perf_interrupt(int irq, void *dev_id)
 {
 	return perf_irq();
 }
@@ -257,8 +155,10 @@ static struct irqaction perf_irqaction = {
 	.name = "performance",
 };
 
-void __init plat_perf_setup(struct irqaction *irq)
+void __init plat_perf_setup(void)
 {
+	struct irqaction *irq = &perf_irqaction;
+
 	cp0_perfcount_irq = -1;
 
 #ifdef MSC01E_INT_BASE
@@ -297,8 +197,6 @@ void __init plat_timer_setup(struct irqaction *irq)
 		mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
 	}
 
-	/* we are using the cpu counter for timer interrupts */
-	irq->handler = mips_timer_interrupt;	/* we use our own handler */
 #ifdef CONFIG_MIPS_MT_SMTC
 	setup_irq_smtc(mips_cpu_timer_irq, irq, 0x100 << cp0_compare_irq);
 #else
@@ -308,5 +206,5 @@ void __init plat_timer_setup(struct irqaction *irq)
 	set_irq_handler(mips_cpu_timer_irq, handle_percpu_irq);
 #endif
 
-	plat_perf_setup(&perf_irqaction);
+	plat_perf_setup();
 }

arch/mips/mipssim/sim_time.c

@@ -23,77 +23,6 @@
 
 unsigned long cpu_khz;
 
-irqreturn_t sim_timer_interrupt(int irq, void *dev_id)
-{
-#ifdef CONFIG_SMP
-	int cpu = smp_processor_id();
-
-	/*
-	 * CPU 0 handles the global timer interrupt job
-	 * resets count/compare registers to trigger next timer int.
-	 */
-#ifndef CONFIG_MIPS_MT_SMTC
-	if (cpu == 0) {
-		timer_interrupt(irq, dev_id);
-	} else {
-		/* Everyone else needs to reset the timer int here as
-		   ll_local_timer_interrupt doesn't */
-		/*
-		 * FIXME: need to cope with counter underflow.
-		 * More support needs to be added to kernel/time for
-		 * counter/timer interrupts on multiple CPU's
-		 */
-		write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
-	}
-#else /* SMTC */
-	/*
-	 *  In SMTC system, one Count/Compare set exists per VPE.
-	 *  Which TC within a VPE gets the interrupt is essentially
-	 *  random - we only know that it shouldn't be one with
-	 *  IXMT set. Whichever TC gets the interrupt needs to
-	 *  send special interprocessor interrupts to the other
-	 *  TCs to make sure that they schedule, etc.
-	 *
-	 *  That code is specific to the SMTC kernel, not to
-	 *  the simulation platform, so it's invoked from
-	 *  the general MIPS timer_interrupt routine.
-	 *
-	 * We have a problem in that the interrupt vector code
-	 * had to turn off the timer IM bit to avoid redundant
-	 * entries, but we may never get to mips_cpu_irq_end
-	 * to turn it back on again if the scheduler gets
-	 * involved.  So we clear the pending timer here,
-	 * and re-enable the mask...
-	 */
-
-	int vpflags = dvpe();
-	write_c0_compare (read_c0_count() - 1);
-	clear_c0_cause(0x100 << cp0_compare_irq);
-	set_c0_status(0x100 << cp0_compare_irq);
-	irq_enable_hazard();
-	evpe(vpflags);
-
-	if (cpu_data[cpu].vpe_id == 0)
-		timer_interrupt(irq, dev_id);
-	else
-		write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
-	smtc_timer_broadcast(cpu_data[cpu].vpe_id);
-
-#endif /* CONFIG_MIPS_MT_SMTC */
-
-	/*
-	 * every CPU should do profiling and process accounting
-	 */
-	local_timer_interrupt (irq, dev_id);
-
-	return IRQ_HANDLED;
-#else
-	return timer_interrupt (irq, dev_id);
-#endif
-}
-
-
-
 /*
  * Estimate CPU frequency.  Sets mips_hpt_frequency as a side-effect
  */
@@ -185,7 +114,6 @@ void __init plat_timer_setup(struct irqaction *irq)
 	}
 
 	/* we are using the cpu counter for timer interrupts */
-	irq->handler = sim_timer_interrupt;
 	setup_irq(mips_cpu_timer_irq, irq);
 
 #ifdef CONFIG_SMP

arch/mips/sgi-ip22/ip22-int.c

@@ -20,10 +20,10 @@
 #include <asm/mipsregs.h>
 #include <asm/addrspace.h>
 #include <asm/irq_cpu.h>
-
 #include <asm/sgi/ioc.h>
 #include <asm/sgi/hpc3.h>
 #include <asm/sgi/ip22.h>
+#include <asm/time.h>
 
 /* #define DEBUG_SGINT */
 
@@ -204,7 +204,6 @@ static struct irqaction map1_cascade = {
 #define SGI_INTERRUPTS	SGINT_LOCAL3
 #endif
 
-extern void indy_r4k_timer_interrupt(void);
 extern void indy_8254timer_irq(void);
 
 /*
@@ -243,7 +242,7 @@ asmlinkage void plat_irq_dispatch(void)
 	 * First we check for r4k counter/timer IRQ.
 	 */
 	if (pending & CAUSEF_IP7)
-		indy_r4k_timer_interrupt();
+		ll_timer_interrupt(SGI_TIMER_IRQ, NULL);
 	else if (pending & CAUSEF_IP2)
 		indy_local0_irqdispatch();
 	else if (pending & CAUSEF_IP3)

arch/mips/sgi-ip22/ip22-time.c

@@ -189,16 +189,6 @@ void indy_8254timer_irq(void)
 	irq_exit();
 }
 
-void indy_r4k_timer_interrupt(void)
-{
-	int irq = SGI_TIMER_IRQ;
-
-	irq_enter();
-	kstat_this_cpu.irqs[irq]++;
-	timer_interrupt(irq, NULL);
-	irq_exit();
-}
-
 void __init plat_timer_setup(struct irqaction *irq)
 {
 	/* over-write the handler, we use our own way */

arch/mips/sibyte/bcm1480/time.c

@@ -103,18 +103,7 @@ void bcm1480_timer_interrupt(void)
 	__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
 	      IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 
-	if (cpu == 0) {
-		/*
-		 * CPU 0 handles the global timer interrupt job
-		 */
-		ll_timer_interrupt(irq);
-	}
-	else {
-		/*
-		 * other CPUs should just do profiling and process accounting
-		 */
-		ll_local_timer_interrupt(irq);
-	}
+	ll_timer_interrupt(irq);
 }
 
 static cycle_t bcm1480_hpt_read(void)

arch/mips/sibyte/sb1250/time.c

@@ -125,18 +125,7 @@ void sb1250_timer_interrupt(void)
 	____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
 		       IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 
-	if (cpu == 0) {
-		/*
-		 * CPU 0 handles the global timer interrupt job
-		 */
-		ll_timer_interrupt(irq);
-	}
-	else {
-		/*
-		 * other CPUs should just do profiling and process accounting
-		 */
-		ll_local_timer_interrupt(irq);
-	}
+	ll_timer_interrupt(irq);
 }
 
 /*

include/asm-mips/time.h

@@ -49,20 +49,14 @@ extern void (*mips_timer_ack)(void);
 extern struct clocksource clocksource_mips;
 
 /*
- * high-level timer interrupt routines.
+ * The low-level timer interrupt routine.
  */
-extern irqreturn_t timer_interrupt(int irq, void *dev_id);
-
-/*
- * the corresponding low-level timer interrupt routine.
- */
-extern asmlinkage void ll_timer_interrupt(int irq);
+extern void ll_timer_interrupt(int irq, void *dev_id);
 
 /*
  * profiling and process accouting is done separately in local_timer_interrupt
  */
 extern void local_timer_interrupt(int irq, void *dev_id);
-extern asmlinkage void ll_local_timer_interrupt(int irq);
 
 /*
  * board specific routines required by time_init().
@@ -78,4 +72,10 @@ extern void plat_timer_setup(struct irqaction *irq);
  */
 extern unsigned int mips_hpt_frequency;
 
+/*
+ * The performance counter IRQ on MIPS is a close relative to the timer IRQ
+ * so it lives here.
+ */
+extern int (*perf_irq)(void);
+
 #endif /* _ASM_TIME_H */