Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 918cae14 编写于 作者: T Tony Lindgren
浏览文件
操作

Merge branch 'for-tony' of git://gitorious.org/linux-omap-dss2/linux into omap-for-linus

上级 0482e3c6 7f049ad1
隐藏空白更改
内联 并排
Showing with 618 addition and 12 deletion
arch/arm/mach-omap2/board-am3517evm.c
浏览文件 @ 918cae14
......@@ -29,9 +29,151 @@
#include <plat/board.h>
#include <plat/common.h>
#include <plat/usb.h>
#include <plat/display.h>
#include "mux.h"
#define LCD_PANEL_PWR 176
#define LCD_PANEL_BKLIGHT_PWR 182
#define LCD_PANEL_PWM 181
static int lcd_enabled;
static int dvi_enabled;
static void __init am3517_evm_display_init(void)
{
int r;
omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP);
omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN);
/*
* Enable GPIO 182 = LCD Backlight Power
*/
r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr");
if (r) {
printk(KERN_ERR "failed to get lcd_backlight_pwr\n");
return;
}
gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1);
/*
* Enable GPIO 181 = LCD Panel PWM
*/
r = gpio_request(LCD_PANEL_PWM, "lcd_pwm");
if (r) {
printk(KERN_ERR "failed to get lcd_pwm\n");
goto err_1;
}
gpio_direction_output(LCD_PANEL_PWM, 1);
/*
* Enable GPIO 176 = LCD Panel Power enable pin
*/
r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr");
if (r) {
printk(KERN_ERR "failed to get lcd_panel_pwr\n");
goto err_2;
}
gpio_direction_output(LCD_PANEL_PWR, 1);
printk(KERN_INFO "Display initialized successfully\n");
return;
err_2:
gpio_free(LCD_PANEL_PWM);
err_1:
gpio_free(LCD_PANEL_BKLIGHT_PWR);
}
static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
{
if (dvi_enabled) {
printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
return -EINVAL;
}
gpio_set_value(LCD_PANEL_PWR, 1);
lcd_enabled = 1;
return 0;
}
static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
{
gpio_set_value(LCD_PANEL_PWR, 0);
lcd_enabled = 0;
}
static struct omap_dss_device am3517_evm_lcd_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "lcd",
.driver_name = "sharp_lq_panel",
.phy.dpi.data_lines = 16,
.platform_enable = am3517_evm_panel_enable_lcd,
.platform_disable = am3517_evm_panel_disable_lcd,
};
static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
{
return 0;
}
static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev)
{
}
static struct omap_dss_device am3517_evm_tv_device = {
.type = OMAP_DISPLAY_TYPE_VENC,
.name = "tv",
.driver_name = "venc",
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
.platform_enable = am3517_evm_panel_enable_tv,
.platform_disable = am3517_evm_panel_disable_tv,
};
static int am3517_evm_panel_enable_dvi(struct omap_dss_device *dssdev)
{
if (lcd_enabled) {
printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
return -EINVAL;
}
dvi_enabled = 1;
return 0;
}
static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
{
dvi_enabled = 0;
}
static struct omap_dss_device am3517_evm_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "generic_panel",
.phy.dpi.data_lines = 24,
.platform_enable = am3517_evm_panel_enable_dvi,
.platform_disable = am3517_evm_panel_disable_dvi,
};
static struct omap_dss_device *am3517_evm_dss_devices[] = {
&am3517_evm_lcd_device,
&am3517_evm_tv_device,
&am3517_evm_dvi_device,
};
static struct omap_dss_board_info am3517_evm_dss_data = {
.num_devices = ARRAY_SIZE(am3517_evm_dss_devices),
.devices = am3517_evm_dss_devices,
.default_device = &am3517_evm_lcd_device,
};
struct platform_device am3517_evm_dss_device = {
.name = "omapdss",
.id = -1,
.dev = {
.platform_data = &am3517_evm_dss_data,
},
};
/*
* Board initialization
*/
......@@ -39,6 +181,7 @@ static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
};
static struct platform_device *am3517_evm_devices[] __initdata = {
&am3517_evm_dss_device,
};
static void __init am3517_evm_init_irq(void)
......@@ -78,6 +221,8 @@ static void __init am3517_evm_init(void)
omap_serial_init();
usb_ehci_init(&ehci_pdata);
/* DSS */
am3517_evm_display_init();
}
static void __init am3517_evm_map_io(void)
......
arch/arm/mach-omap2/board-cm-t35.c
浏览文件 @ 918cae14
......@@ -32,6 +32,9 @@
#include <linux/i2c/twl.h>
#include <linux/regulator/machine.h>
#include <linux/spi/spi.h>
#include <linux/spi/tdo24m.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -41,6 +44,7 @@
#include <plat/nand.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <plat/display.h>
#include <mach/hardware.h>
......@@ -248,7 +252,6 @@ static inline void cm_t35_init_nand(void) {}
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <plat/mcspi.h>
......@@ -304,6 +307,193 @@ static void __init cm_t35_init_ads7846(void)
static inline void cm_t35_init_ads7846(void) {}
#endif
#define CM_T35_LCD_EN_GPIO 157
#define CM_T35_LCD_BL_GPIO 58
#define CM_T35_DVI_EN_GPIO 54
static int lcd_bl_gpio;
static int lcd_en_gpio;
static int dvi_en_gpio;
static int lcd_enabled;
static int dvi_enabled;
static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev)
{
if (dvi_enabled) {
printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
return -EINVAL;
}
gpio_set_value(lcd_en_gpio, 1);
gpio_set_value(lcd_bl_gpio, 1);
lcd_enabled = 1;
return 0;
}
static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev)
{
lcd_enabled = 0;
gpio_set_value(lcd_bl_gpio, 0);
gpio_set_value(lcd_en_gpio, 0);
}
static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev)
{
if (lcd_enabled) {
printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
return -EINVAL;
}
gpio_set_value(dvi_en_gpio, 0);
dvi_enabled = 1;
return 0;
}
static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev)
{
gpio_set_value(dvi_en_gpio, 1);
dvi_enabled = 0;
}
static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev)
{
return 0;
}
static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
{
}
static struct omap_dss_device cm_t35_lcd_device = {
.name = "lcd",
.driver_name = "toppoly_tdo35s_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 18,
.platform_enable = cm_t35_panel_enable_lcd,
.platform_disable = cm_t35_panel_disable_lcd,
};
static struct omap_dss_device cm_t35_dvi_device = {
.name = "dvi",
.driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.platform_enable = cm_t35_panel_enable_dvi,
.platform_disable = cm_t35_panel_disable_dvi,
};
static struct omap_dss_device cm_t35_tv_device = {
.name = "tv",
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
.platform_enable = cm_t35_panel_enable_tv,
.platform_disable = cm_t35_panel_disable_tv,
};
static struct omap_dss_device *cm_t35_dss_devices[] = {
&cm_t35_lcd_device,
&cm_t35_dvi_device,
&cm_t35_tv_device,
};
static struct omap_dss_board_info cm_t35_dss_data = {
.num_devices = ARRAY_SIZE(cm_t35_dss_devices),
.devices = cm_t35_dss_devices,
.default_device = &cm_t35_dvi_device,
};
static struct platform_device cm_t35_dss_device = {
.name = "omapdss",
.id = -1,
.dev = {
.platform_data = &cm_t35_dss_data,
},
};
static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1, /* 0: slave, 1: master */
};
static struct tdo24m_platform_data tdo24m_config = {
.model = TDO35S,
};
static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
{
.modalias = "tdo24m",
.bus_num = 4,
.chip_select = 0,
.max_speed_hz = 1000000,
.controller_data = &tdo24m_mcspi_config,
.platform_data = &tdo24m_config,
},
};
static void __init cm_t35_init_display(void)
{
int err;
lcd_en_gpio = CM_T35_LCD_EN_GPIO;
lcd_bl_gpio = CM_T35_LCD_BL_GPIO;
dvi_en_gpio = CM_T35_DVI_EN_GPIO;
spi_register_board_info(cm_t35_lcd_spi_board_info,
ARRAY_SIZE(cm_t35_lcd_spi_board_info));
err = gpio_request(lcd_en_gpio, "LCD RST");
if (err) {
pr_err("CM-T35: failed to get LCD reset GPIO\n");
goto out;
}
err = gpio_request(lcd_bl_gpio, "LCD BL");
if (err) {
pr_err("CM-T35: failed to get LCD backlight control GPIO\n");
goto err_lcd_bl;
}
err = gpio_request(dvi_en_gpio, "DVI EN");
if (err) {
pr_err("CM-T35: failed to get DVI reset GPIO\n");
goto err_dvi_en;
}
gpio_export(lcd_en_gpio, 0);
gpio_export(lcd_bl_gpio, 0);
gpio_export(dvi_en_gpio, 0);
gpio_direction_output(lcd_en_gpio, 0);
gpio_direction_output(lcd_bl_gpio, 0);
gpio_direction_output(dvi_en_gpio, 1);
msleep(50);
gpio_set_value(lcd_en_gpio, 1);
err = platform_device_register(&cm_t35_dss_device);
if (err) {
pr_err("CM-T35: failed to register DSS device\n");
goto err_dev_reg;
}
return;
err_dev_reg:
gpio_free(dvi_en_gpio);
err_dvi_en:
gpio_free(lcd_bl_gpio);
err_lcd_bl:
gpio_free(lcd_en_gpio);
out:
return;
}
static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
.supply = "vmmc",
};
......@@ -312,6 +502,16 @@ static struct regulator_consumer_supply cm_t35_vsim_supply = {
.supply = "vmmc_aux",
};
static struct regulator_consumer_supply cm_t35_vdac_supply = {
.supply = "vdda_dac",
.dev = &cm_t35_dss_device.dev,
};
static struct regulator_consumer_supply cm_t35_vdvi_supply = {
.supply = "vdvi",
.dev = &cm_t35_dss_device.dev,
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data cm_t35_vmmc1 = {
.constraints = {
......@@ -342,6 +542,35 @@ static struct regulator_init_data cm_t35_vsim = {
.consumer_supplies = &cm_t35_vsim_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data cm_t35_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &cm_t35_vdac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data cm_t35_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &cm_t35_vdvi_supply,
};
static struct twl4030_usb_data cm_t35_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
......@@ -445,6 +674,8 @@ static struct twl4030_platform_data cm_t35_twldata = {
.gpio = &cm_t35_gpio_data,
.vmmc1 = &cm_t35_vmmc1,
.vsim = &cm_t35_vsim,
.vdac = &cm_t35_vdac,
.vpll2 = &cm_t35_vpll2,
};
static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = {
......@@ -568,6 +799,11 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
/* display controls */
OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
/* TPS IRQ */
OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
OMAP_PIN_INPUT_PULLUP),
......@@ -584,6 +820,7 @@ static void __init cm_t35_init(void)
cm_t35_init_ads7846();
cm_t35_init_ethernet();
cm_t35_init_led();
cm_t35_init_display();
usb_musb_init();
}
......
arch/arm/mach-omap2/board-omap3evm.c
浏览文件 @ 918cae14
......@@ -41,6 +41,7 @@
#include <plat/usb.h>
#include <plat/common.h>
#include <plat/mcspi.h>
#include <plat/display.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
......@@ -147,6 +148,187 @@ static inline void __init omap3evm_init_smsc911x(void)
static inline void __init omap3evm_init_smsc911x(void) { return; }
#endif
/*
* OMAP3EVM LCD Panel control signals
*/
#define OMAP3EVM_LCD_PANEL_LR 2
#define OMAP3EVM_LCD_PANEL_UD 3
#define OMAP3EVM_LCD_PANEL_INI 152
#define OMAP3EVM_LCD_PANEL_ENVDD 153
#define OMAP3EVM_LCD_PANEL_QVGA 154
#define OMAP3EVM_LCD_PANEL_RESB 155
#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210
#define OMAP3EVM_DVI_PANEL_EN_GPIO 199
static int lcd_enabled;
static int dvi_enabled;
static void __init omap3_evm_display_init(void)
{
int r;
r = gpio_request(OMAP3EVM_LCD_PANEL_RESB, "lcd_panel_resb");
if (r) {
printk(KERN_ERR "failed to get lcd_panel_resb\n");
return;
}
gpio_direction_output(OMAP3EVM_LCD_PANEL_RESB, 1);
r = gpio_request(OMAP3EVM_LCD_PANEL_INI, "lcd_panel_ini");
if (r) {
printk(KERN_ERR "failed to get lcd_panel_ini\n");
goto err_1;
}
gpio_direction_output(OMAP3EVM_LCD_PANEL_INI, 1);
r = gpio_request(OMAP3EVM_LCD_PANEL_QVGA, "lcd_panel_qvga");
if (r) {
printk(KERN_ERR "failed to get lcd_panel_qvga\n");
goto err_2;
}
gpio_direction_output(OMAP3EVM_LCD_PANEL_QVGA, 0);
r = gpio_request(OMAP3EVM_LCD_PANEL_LR, "lcd_panel_lr");
if (r) {
printk(KERN_ERR "failed to get lcd_panel_lr\n");
goto err_3;
}
gpio_direction_output(OMAP3EVM_LCD_PANEL_LR, 1);
r = gpio_request(OMAP3EVM_LCD_PANEL_UD, "lcd_panel_ud");
if (r) {
printk(KERN_ERR "failed to get lcd_panel_ud\n");
goto err_4;
}
gpio_direction_output(OMAP3EVM_LCD_PANEL_UD, 1);
r = gpio_request(OMAP3EVM_LCD_PANEL_ENVDD, "lcd_panel_envdd");
if (r) {
printk(KERN_ERR "failed to get lcd_panel_envdd\n");
goto err_5;
}
gpio_direction_output(OMAP3EVM_LCD_PANEL_ENVDD, 0);
return;
err_5:
gpio_free(OMAP3EVM_LCD_PANEL_UD);
err_4:
gpio_free(OMAP3EVM_LCD_PANEL_LR);
err_3:
gpio_free(OMAP3EVM_LCD_PANEL_QVGA);
err_2:
gpio_free(OMAP3EVM_LCD_PANEL_INI);
err_1:
gpio_free(OMAP3EVM_LCD_PANEL_RESB);
}
static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev)
{
if (dvi_enabled) {
printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
return -EINVAL;
}
gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0);
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
else
gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
lcd_enabled = 1;
return 0;
}
static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev)
{
gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1);
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
else
gpio_set_value(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
lcd_enabled = 0;
}
static struct omap_dss_device omap3_evm_lcd_device = {
.name = "lcd",
.driver_name = "sharp_ls_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 18,
.platform_enable = omap3_evm_enable_lcd,
.platform_disable = omap3_evm_disable_lcd,
};
static int omap3_evm_enable_tv(struct omap_dss_device *dssdev)
{
return 0;
}
static void omap3_evm_disable_tv(struct omap_dss_device *dssdev)
{
}
static struct omap_dss_device omap3_evm_tv_device = {
.name = "tv",
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
.platform_enable = omap3_evm_enable_tv,
.platform_disable = omap3_evm_disable_tv,
};
static int omap3_evm_enable_dvi(struct omap_dss_device *dssdev)
{
if (lcd_enabled) {
printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
return -EINVAL;
}
gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 1);
dvi_enabled = 1;
return 0;
}
static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
{
gpio_set_value(OMAP3EVM_DVI_PANEL_EN_GPIO, 0);
dvi_enabled = 0;
}
static struct omap_dss_device omap3_evm_dvi_device = {
.name = "dvi",
.driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.platform_enable = omap3_evm_enable_dvi,
.platform_disable = omap3_evm_disable_dvi,
};
static struct omap_dss_device *omap3_evm_dss_devices[] = {
&omap3_evm_lcd_device,
&omap3_evm_tv_device,
&omap3_evm_dvi_device,
};
static struct omap_dss_board_info omap3_evm_dss_data = {
.num_devices = ARRAY_SIZE(omap3_evm_dss_devices),
.devices = omap3_evm_dss_devices,
.default_device = &omap3_evm_lcd_device,
};
static struct platform_device omap3_evm_dss_device = {
.name = "omapdss",
.id = -1,
.dev = {
.platform_data = &omap3_evm_dss_data,
},
};
static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
.supply = "vmmc",
};
......@@ -236,6 +418,14 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
* the P2 connector; notably LEDA for the LCD backlight.
*/
/* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */
gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL");
gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
/* gpio + 7 == DVI Enable */
gpio_request(gpio + 7, "EN_DVI");
gpio_direction_output(gpio + 7, 0);
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
......@@ -300,6 +490,47 @@ static struct twl4030_codec_data omap3evm_codec_data = {
.audio = &omap3evm_audio_data,
};
static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = {
.supply = "vdda_dac",
.dev = &omap3_evm_dss_device.dev,
};
/* VDAC for DSS driving S-Video */
static struct regulator_init_data omap3_evm_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3_evm_vdda_dac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_consumer_supply omap3_evm_vpll2_supply = {
.supply = "vdvi",
.dev = &omap3_evm_lcd_device.dev,
};
static struct regulator_init_data omap3_evm_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3_evm_vpll2_supply,
};
static struct twl4030_platform_data omap3evm_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
......@@ -310,6 +541,8 @@ static struct twl4030_platform_data omap3evm_twldata = {
.usb = &omap3evm_usb_data,
.gpio = &omap3evm_gpio_data,
.codec = &omap3evm_codec_data,
.vdac = &omap3_evm_vdac,
.vpll2 = &omap3_evm_vpll2,
};
static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
......@@ -337,15 +570,6 @@ static int __init omap3_evm_i2c_init(void)
return 0;
}
static struct platform_device omap3_evm_lcd_device = {
.name = "omap3evm_lcd",
.id = -1,
};
static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
.ctrl_name = "internal",
};
static void ads7846_dev_init(void)
{
if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
......@@ -393,7 +617,6 @@ struct spi_board_info omap3evm_spi_board_info[] = {
};
static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
{ OMAP_TAG_LCD, &omap3_evm_lcd_config },
};
static void __init omap3_evm_init_irq(void)
......@@ -406,7 +629,7 @@ static void __init omap3_evm_init_irq(void)
}
static struct platform_device *omap3_evm_devices[] __initdata = {
&omap3_evm_lcd_device,
&omap3_evm_dss_device,
};
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
......@@ -473,6 +696,7 @@ static void __init omap3_evm_init(void)
usb_ehci_init(&ehci_pdata);
ads7846_dev_init();
omap3evm_init_smsc911x();
omap3_evm_display_init();
}
static void __init omap3_evm_map_io(void)
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或