Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 9078ac21 编写于 作者: S Stefan Schmidt 提交者： Eric Miao
浏览文件
操作

[ARM] pxa/ezx: GPIO configuration 

Pin configs for different generations and phones.
Signed-off-by: NDaniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: NEric Miao <eric.miao@marvell.com>
上级 bab16dfc
隐藏空白更改
内联 并排
Showing with 344 addition and 24 deletion
arch/arm/mach-pxa/ezx.c
浏览文件 @ 9078ac21
......@@ -101,36 +101,291 @@ static unsigned long ezx_pin_config[] __initdata = {
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
/* STUART */
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
/* For A780 support (connected with Neptune GSM chip) */
GPIO30_USB_P3_2, /* ICL_TXENB */
GPIO31_USB_P3_6, /* ICL_VPOUT */
GPIO90_USB_P3_5, /* ICL_VPIN */
GPIO91_USB_P3_1, /* ICL_XRXD */
GPIO56_USB_P3_4, /* ICL_VMOUT */
GPIO113_USB_P3_3, /* /ICL_VMIN */
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* PCAP SSP */
GPIO29_SSP1_SCLK,
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
GPIO24_GPIO, /* pcap chip select */
GPIO1_GPIO, /* pcap interrupt */
GPIO4_GPIO, /* WDI_AP */
GPIO55_GPIO, /* SYS_RESTART */
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
GPIO11_GPIO, /* mmc detect */
/* usb to external transceiver */
GPIO34_USB_P2_2,
GPIO35_USB_P2_1,
GPIO36_USB_P2_4,
GPIO39_USB_P2_6,
GPIO40_USB_P2_5,
GPIO53_USB_P2_3,
/* usb to Neptune GSM chip */
GPIO30_USB_P3_2,
GPIO31_USB_P3_6,
GPIO90_USB_P3_5,
GPIO91_USB_P3_1,
GPIO56_USB_P3_4,
GPIO113_USB_P3_3,
};
#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
static unsigned long gen1_pin_config[] __initdata = {
/* flip / lockswitch */
GPIO12_GPIO,
/* bluetooth (bcm2035) */
GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
GPIO48_GPIO, /* RESET */
GPIO28_GPIO, /* WAKEUP */
/* Neptune handshake */
GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
GPIO57_GPIO, /* AP_RDY */
GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */
GPIO82_GPIO, /* RESET */
GPIO99_GPIO, /* TC_MM_EN */
/* sound */
GPIO52_SSP3_SCLK,
GPIO83_SSP3_SFRM,
GPIO81_SSP3_TXD,
GPIO89_SSP3_RXD,
/* ssp2 pins to in */
GPIO22_GPIO, /* SSP2_SCLK */
GPIO37_GPIO, /* SSP2_SFRM */
GPIO38_GPIO, /* SSP2_TXD */
GPIO88_GPIO, /* SSP2_RXD */
/* camera */
GPIO23_CIF_MCLK,
GPIO54_CIF_PCLK,
GPIO85_CIF_LV,
GPIO84_CIF_FV,
GPIO27_CIF_DD_0,
GPIO114_CIF_DD_1,
GPIO51_CIF_DD_2,
GPIO115_CIF_DD_3,
GPIO95_CIF_DD_4,
GPIO94_CIF_DD_5,
GPIO17_CIF_DD_6,
GPIO108_CIF_DD_7,
GPIO50_GPIO, /* CAM_EN */
GPIO19_GPIO, /* CAM_RST */
/* EMU */
GPIO120_GPIO, /* EMU_MUX1 */
GPIO119_GPIO, /* EMU_MUX2 */
GPIO86_GPIO, /* SNP_INT_CTL */
GPIO87_GPIO, /* SNP_INT_IN */
};
#endif
#if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
static unsigned long gen2_pin_config[] __initdata = {
/* flip / lockswitch */
GPIO15_GPIO,
/* EOC */
GPIO10_GPIO,
/* bluetooth (bcm2045) */
GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
GPIO37_GPIO, /* RESET */
GPIO57_GPIO, /* WAKEUP */
/* Neptune handshake */
GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
GPIO96_GPIO, /* AP_RDY */
GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
GPIO116_GPIO, /* RESET */
GPIO41_GPIO, /* BP_FLASH */
/* sound */
GPIO52_SSP3_SCLK,
GPIO83_SSP3_SFRM,
GPIO81_SSP3_TXD,
GPIO82_SSP3_RXD,
/* ssp2 pins to in */
GPIO22_GPIO, /* SSP2_SCLK */
GPIO14_GPIO, /* SSP2_SFRM */
GPIO38_GPIO, /* SSP2_TXD */
GPIO88_GPIO, /* SSP2_RXD */
static void __init ezx_init(void)
/* camera */
GPIO23_CIF_MCLK,
GPIO54_CIF_PCLK,
GPIO85_CIF_LV,
GPIO84_CIF_FV,
GPIO27_CIF_DD_0,
GPIO114_CIF_DD_1,
GPIO51_CIF_DD_2,
GPIO115_CIF_DD_3,
GPIO95_CIF_DD_4,
GPIO48_CIF_DD_5,
GPIO93_CIF_DD_6,
GPIO12_CIF_DD_7,
GPIO50_GPIO, /* CAM_EN */
GPIO28_GPIO, /* CAM_RST */
GPIO17_GPIO, /* CAM_FLASH */
};
#endif
#ifdef CONFIG_MACH_EZX_A780
static unsigned long a780_pin_config[] __initdata = {
/* keypad */
GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
/* attenuate sound */
GPIO96_GPIO,
};
#endif
#ifdef CONFIG_MACH_EZX_E680
static unsigned long e680_pin_config[] __initdata = {
/* keypad */
GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
/* MIDI */
GPIO79_GPIO, /* VA_SEL_BUL */
GPIO80_GPIO, /* FLT_SEL_BUL */
GPIO78_GPIO, /* MIDI_RESET */
GPIO33_GPIO, /* MIDI_CS */
GPIO15_GPIO, /* MIDI_IRQ */
GPIO49_GPIO, /* MIDI_NPWE */
GPIO18_GPIO, /* MIDI_RDY */
/* leds */
GPIO46_GPIO,
GPIO47_GPIO,
};
#endif
#ifdef CONFIG_MACH_EZX_A1200
static unsigned long a1200_pin_config[] __initdata = {
/* keypad */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
GPIO108_KP_MKOUT_5,
};
#endif
#ifdef CONFIG_MACH_EZX_A910
static unsigned long a910_pin_config[] __initdata = {
/* keypad */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
GPIO108_KP_MKOUT_5,
/* WLAN */
GPIO89_GPIO, /* RESET */
GPIO33_GPIO, /* WAKEUP */
GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
/* MMC CS */
GPIO20_GPIO,
};
#endif
#ifdef CONFIG_MACH_EZX_E2
static unsigned long e2_pin_config[] __initdata = {
/* keypad */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
GPIO108_KP_MKOUT_5,
};
#endif
#ifdef CONFIG_MACH_EZX_E6
static unsigned long e6_pin_config[] __initdata = {
/* keypad */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
GPIO108_KP_MKOUT_5,
};
#endif
#ifdef CONFIG_MACH_EZX_A780
static void __init a780_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
pxa_set_i2c_info(NULL);
if (machine_is_ezx_a780() || machine_is_ezx_e680())
set_pxa_fb_info(&ezx_fb_info_1);
else
set_pxa_fb_info(&ezx_fb_info_2);
set_pxa_fb_info(&ezx_fb_info_1);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
#ifdef CONFIG_MACH_EZX_A780
MACHINE_START(EZX_A780, "Motorola EZX A780")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
......@@ -138,11 +393,24 @@ MACHINE_START(EZX_A780, "Motorola EZX A780")
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = &ezx_init,
.init_machine = a780_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E680
static void __init e680_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
pxa_set_i2c_info(NULL);
set_pxa_fb_info(&ezx_fb_info_1);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(EZX_E680, "Motorola EZX E680")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
......@@ -150,11 +418,24 @@ MACHINE_START(EZX_E680, "Motorola EZX E680")
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = &ezx_init,
.init_machine = e680_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_A1200
static void __init a1200_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
pxa_set_i2c_info(NULL);
set_pxa_fb_info(&ezx_fb_info_2);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(EZX_A1200, "Motorola EZX A1200")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
......@@ -162,11 +443,24 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200")
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = &ezx_init,
.init_machine = a1200_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_A910
static void __init a910_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
pxa_set_i2c_info(NULL);
set_pxa_fb_info(&ezx_fb_info_2);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(EZX_A910, "Motorola EZX A910")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
......@@ -174,11 +468,24 @@ MACHINE_START(EZX_A910, "Motorola EZX A910")
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = &ezx_init,
.init_machine = a910_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E6
static void __init e6_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
pxa_set_i2c_info(NULL);
set_pxa_fb_info(&ezx_fb_info_2);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(EZX_E6, "Motorola EZX E6")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
......@@ -186,11 +493,24 @@ MACHINE_START(EZX_E6, "Motorola EZX E6")
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = &ezx_init,
.init_machine = e6_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E2
static void __init e2_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
pxa_set_i2c_info(NULL);
set_pxa_fb_info(&ezx_fb_info_2);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(EZX_E2, "Motorola EZX E2")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
......@@ -198,6 +518,6 @@ MACHINE_START(EZX_E2, "Motorola EZX E2")
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = &ezx_init,
.init_machine = e2_init,
MACHINE_END
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或