Merge tag 'gpmc-omap-fixes-for-v4.7' of https://github.com/rogerq/linux into fixes

OMAP-GPMC: Fixes for for v4.7-rc cycle:

- Fix omap gpmc EXTRADELAY timing. The DT provided timings
were wrongly used causing devices requiring extra delay timing
to fail.

* tag 'gpmc-omap-fixes-for-v4.7' of https://github.com/rogerq/linux:
  memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing
  + Linux 4.7-rc3
Signed-off-by: NOlof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/hwmon/ina2xx.txt

@@ -7,6 +7,7 @@ Required properties:
 	- "ti,ina220" for ina220
 	- "ti,ina226" for ina226
 	- "ti,ina230" for ina230
+	- "ti,ina231" for ina231
 - reg: I2C address
 
 Optional properties:

Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt

@@ -44,8 +44,8 @@ Required properties:
 - our-claim-gpio: The GPIO that we use to claim the bus.
 - their-claim-gpios: The GPIOs that the other sides use to claim the bus.
   Note that some implementations may only support a single other master.
-- Standard I2C mux properties. See mux.txt in this directory.
-- Single I2C child bus node at reg 0. See mux.txt in this directory.
+- Standard I2C mux properties. See i2c-mux.txt in this directory.
+- Single I2C child bus node at reg 0. See i2c-mux.txt in this directory.
 
 Optional properties:
 - slew-delay-us: microseconds to wait for a GPIO to go high. Default is 10 us.

Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt

@@ -27,7 +27,8 @@ Required properties:
 - i2c-bus-name: The name of this bus. Also needed as pinctrl-name for the I2C
 		parents.
 
-Furthermore, I2C mux properties and child nodes. See mux.txt in this directory.
+Furthermore, I2C mux properties and child nodes. See i2c-mux.txt in this
+directory.
 
 Example:
 

Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt

@@ -22,8 +22,8 @@ Required properties:
 - i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
   port is connected to.
 - mux-gpios: list of gpios used to control the muxer
-* Standard I2C mux properties. See mux.txt in this directory.
-* I2C child bus nodes. See mux.txt in this directory.
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.txt in this directory.
 
 Optional properties:
 - idle-state: value to set the muxer to when idle. When no value is
@@ -33,7 +33,7 @@ For each i2c child node, an I2C child bus will be created. They will
 be numbered based on their order in the device tree.
 
 Whenever an access is made to a device on a child bus, the value set
-in the revelant node's reg property will be output using the list of
+in the relevant node's reg property will be output using the list of
 GPIOs, the first in the list holding the least-significant value.
 
 If an idle state is defined, using the idle-state (optional) property,

Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt

@@ -28,9 +28,9 @@ Also required are:
 * Standard pinctrl properties that specify the pin mux state for each child
   bus. See ../pinctrl/pinctrl-bindings.txt.
 
-* Standard I2C mux properties. See mux.txt in this directory.
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
 
-* I2C child bus nodes. See mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.txt in this directory.
 
 For each named state defined in the pinctrl-names property, an I2C child bus
 will be created. I2C child bus numbers are assigned based on the index into

Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt

@@ -7,8 +7,8 @@ Required properties:
 - compatible: i2c-mux-reg
 - i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
   port is connected to.
-* Standard I2C mux properties. See mux.txt in this directory.
-* I2C child bus nodes. See mux.txt in this directory.
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.txt in this directory.
 
 Optional properties:
 - reg: this pair of <offset size> specifies the register to control the mux.
@@ -24,7 +24,7 @@ Optional properties:
   given, it defaults to the last value used.
 
 Whenever an access is made to a device on a child bus, the value set
-in the revelant node's reg property will be output to the register.
+in the relevant node's reg property will be output to the register.
 
 If an idle state is defined, using the idle-state (optional) property,
 whenever an access is not being made to a device on a child bus, the

Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt

@@ -13,10 +13,10 @@ Optional properties:
 		      initialization. This is an array of 28 values(u8).
 
   - marvell,wakeup-pin: It represents wakeup pin number of the bluetooth chip.
-		        firmware will use the pin to wakeup host system.
+		        firmware will use the pin to wakeup host system (u16).
   - marvell,wakeup-gap-ms: wakeup gap represents wakeup latency of the host
 		      platform. The value will be configured to firmware. This
-		      is needed to work chip's sleep feature as expected.
+		      is needed to work chip's sleep feature as expected (u16).
   - interrupt-parent: phandle of the parent interrupt controller
   - interrupts : interrupt pin number to the cpu. Driver will request an irq based
 		 on this interrupt number. During system suspend, the irq will be
@@ -50,7 +50,7 @@ calibration data is also available in below example.
 			0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
 			0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
 			0x00 0x00 0xf0 0x00>;
-		marvell,wakeup-pin = <0x0d>;
-		marvell,wakeup-gap-ms = <0x64>;
+		marvell,wakeup-pin = /bits/ 16 <0x0d>;
+		marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
 	};
 };

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -255,6 +255,7 @@ synology	Synology, Inc.
 SUNW	Sun Microsystems, Inc
 tbs	TBS Technologies
 tcl	Toby Churchill Ltd.
+technexion	TechNexion
 technologic	Technologic Systems
 thine	THine Electronics, Inc.
 ti	Texas Instruments
@@ -269,6 +270,7 @@ tronsmart	Tronsmart
 truly	Truly Semiconductors Limited
 tyan	Tyan Computer Corporation
 upisemi	uPI Semiconductor Corp.
+uniwest	United Western Technologies Corp (UniWest)
 urt	United Radiant Technology Corporation
 usi	Universal Scientific Industrial Co., Ltd.
 v3	V3 Semiconductor

MAINTAINERS

@@ -3087,6 +3087,7 @@ M:	Stephen Boyd <sboyd@codeaurora.org>
 L:	linux-clk@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git
 S:	Maintained
+F:	Documentation/devicetree/bindings/clock/
 F:	drivers/clk/
 X:	drivers/clk/clkdev.c
 F:	include/linux/clk-pr*
@@ -8009,6 +8010,7 @@ Q:	http://patchwork.kernel.org/project/linux-wireless/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git
 S:	Maintained
+F:	Documentation/devicetree/bindings/net/wireless/
 F:	drivers/net/wireless/
 
 NETXEN (1/10) GbE SUPPORT
@@ -8406,10 +8408,9 @@ F:	drivers/i2c/busses/i2c-ocores.c
 OPEN FIRMWARE AND FLATTENED DEVICE TREE
 M:	Rob Herring <robh+dt@kernel.org>
 M:	Frank Rowand <frowand.list@gmail.com>
-M:	Grant Likely <grant.likely@linaro.org>
 L:	devicetree@vger.kernel.org
 W:	http://www.devicetree.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
 S:	Maintained
 F:	drivers/of/
 F:	include/linux/of*.h
@@ -8417,12 +8418,10 @@ F:	scripts/dtc/
 
 OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
 M:	Rob Herring <robh+dt@kernel.org>
-M:	Pawel Moll <pawel.moll@arm.com>
 M:	Mark Rutland <mark.rutland@arm.com>
-M:	Ian Campbell <ijc+devicetree@hellion.org.uk>
-M:	Kumar Gala <galak@codeaurora.org>
 L:	devicetree@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
+Q:	http://patchwork.ozlabs.org/project/devicetree-bindings/list/
 S:	Maintained
 F:	Documentation/devicetree/
 F:	arch/*/boot/dts/

Makefile

 VERSION = 4
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Psychotic Stoned Sheep
 
 # *DOCUMENTATION*

arch/arc/Kconfig

@@ -61,7 +61,7 @@ config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
 config ARCH_DISCONTIGMEM_ENABLE
-	def_bool y
+	def_bool n
 
 config ARCH_FLATMEM_ENABLE
 	def_bool y
@@ -186,9 +186,6 @@ if SMP
 config ARC_HAS_COH_CACHES
 	def_bool n
 
-config ARC_HAS_REENTRANT_IRQ_LV2
-	def_bool n
-
 config ARC_MCIP
 	bool "ARConnect Multicore IP (MCIP) Support "
 	depends on ISA_ARCV2
@@ -366,25 +363,10 @@ config NODES_SHIFT
 if ISA_ARCOMPACT
 
 config ARC_COMPACT_IRQ_LEVELS
-	bool "ARCompact IRQ Priorities: High(2)/Low(1)"
+	bool "Setup Timer IRQ as high Priority"
 	default n
-	# Timer HAS to be high priority, for any other high priority config
-	select ARC_IRQ3_LV2
 	# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
-	depends on !SMP || ARC_HAS_REENTRANT_IRQ_LV2
-
-if ARC_COMPACT_IRQ_LEVELS
-
-config ARC_IRQ3_LV2
-	bool
-
-config ARC_IRQ5_LV2
-	bool
-
-config ARC_IRQ6_LV2
-	bool
-
-endif	#ARC_COMPACT_IRQ_LEVELS
+	depends on !SMP
 
 config ARC_FPU_SAVE_RESTORE
 	bool "Enable FPU state persistence across context switch"
@@ -407,11 +389,6 @@ config ARC_HAS_LLSC
 	default y
 	depends on !ARC_CANT_LLSC
 
-config ARC_STAR_9000923308
-	bool "Workaround for llock/scond livelock"
-	default n
-	depends on ISA_ARCV2 && SMP && ARC_HAS_LLSC
-
 config ARC_HAS_SWAPE
 	bool "Insn: SWAPE (endian-swap)"
 	default y
@@ -471,7 +448,7 @@ config LINUX_LINK_BASE
 
 config HIGHMEM
 	bool "High Memory Support"
-	select DISCONTIGMEM
+	select ARCH_DISCONTIGMEM_ENABLE
 	help
 	  With ARC 2G:2G address split, only upper 2G is directly addressable by
 	  kernel. Enable this to potentially allow access to rest of 2G and PAE

arch/arc/Makefile

@@ -127,7 +127,7 @@ libs-y		+= arch/arc/lib/ $(LIBGCC)
 
 boot		:= arch/arc/boot
 
-#default target for make without any arguements.
+#default target for make without any arguments.
 KBUILD_IMAGE	:= bootpImage
 
 all:	$(KBUILD_IMAGE)

arch/arc/boot/dts/abilis_tb100.dtsi

@@ -23,8 +23,6 @@
 
 
 / {
-	clock-frequency		= <500000000>;	/* 500 MHZ */
-
 	soc100 {
 		bus-frequency	= <166666666>;
 

arch/arc/boot/dts/abilis_tb101.dtsi

@@ -23,8 +23,6 @@
 
 
 / {
-	clock-frequency		= <500000000>;	/* 500 MHZ */
-
 	soc100 {
 		bus-frequency	= <166666666>;
 

arch/arc/boot/dts/axc001.dtsi

@@ -15,7 +15,6 @@
 
 / {
 	compatible = "snps,arc";
-	clock-frequency = <750000000>;	/* 750 MHZ */
 	#address-cells = <1>;
 	#size-cells = <1>;
 

arch/arc/boot/dts/axc003.dtsi

@@ -14,7 +14,6 @@
 
 / {
 	compatible = "snps,arc";
-	clock-frequency = <90000000>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 

arch/arc/boot/dts/axc003_idu.dtsi

@@ -14,7 +14,6 @@
 
 / {
 	compatible = "snps,arc";
-	clock-frequency = <90000000>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 

arch/arc/boot/dts/eznps.dts

@@ -18,7 +18,6 @@
 
 / {
 	compatible = "ezchip,arc-nps";
-	clock-frequency = <83333333>;	/* 83.333333 MHZ */
 	#address-cells = <1>;
 	#size-cells = <1>;
 	interrupt-parent = <&intc>;

arch/arc/boot/dts/nsim_700.dts

@@ -11,7 +11,6 @@
 
 / {
 	compatible = "snps,nsim";
-	clock-frequency = <80000000>;	/* 80 MHZ */
 	#address-cells = <1>;
 	#size-cells = <1>;
 	interrupt-parent = <&core_intc>;

arch/arc/boot/dts/nsimosci.dts

@@ -11,7 +11,6 @@
 
 / {
 	compatible = "snps,nsimosci";
-	clock-frequency = <20000000>;	/* 20 MHZ */
 	#address-cells = <1>;
 	#size-cells = <1>;
 	interrupt-parent = <&core_intc>;

arch/arc/boot/dts/nsimosci_hs.dts

@@ -11,7 +11,6 @@
 
 / {
 	compatible = "snps,nsimosci_hs";
-	clock-frequency = <20000000>;	/* 20 MHZ */
 	#address-cells = <1>;
 	#size-cells = <1>;
 	interrupt-parent = <&core_intc>;

arch/arc/boot/dts/nsimosci_hs_idu.dts

@@ -11,7 +11,6 @@
 
 / {
 	compatible = "snps,nsimosci_hs";
-	clock-frequency = <5000000>;	/* 5 MHZ */
 	#address-cells = <1>;
 	#size-cells = <1>;
 	interrupt-parent = <&core_intc>;

arch/arc/boot/dts/skeleton.dtsi

@@ -13,7 +13,6 @@
 
 / {
 	compatible = "snps,arc";
-	clock-frequency = <80000000>;	/* 80 MHZ */
 	#address-cells = <1>;
 	#size-cells = <1>;
 	chosen { };

arch/arc/boot/dts/skeleton_hs.dtsi

@@ -8,7 +8,6 @@
 
 / {
 	compatible = "snps,arc";
-	clock-frequency = <80000000>;	/* 80 MHZ */
 	#address-cells = <1>;
 	#size-cells = <1>;
 	chosen { };

arch/arc/boot/dts/skeleton_hs_idu.dtsi

@@ -8,7 +8,6 @@
 
 / {
 	compatible = "snps,arc";
-	clock-frequency = <80000000>;	/* 80 MHZ */
 	#address-cells = <1>;
 	#size-cells = <1>;
 	chosen { };

arch/arc/boot/dts/vdk_axc003.dtsi

@@ -14,7 +14,6 @@
 
 / {
 	compatible = "snps,arc";
-	clock-frequency = <50000000>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 

arch/arc/boot/dts/vdk_axc003_idu.dtsi

@@ -15,7 +15,6 @@
 
 / {
 	compatible = "snps,arc";
-	clock-frequency = <50000000>;
 	#address-cells = <1>;
 	#size-cells = <1>;
 

arch/arc/include/asm/atomic.h

@@ -25,50 +25,17 @@
 
 #define atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
 
-#ifdef CONFIG_ARC_STAR_9000923308
-
-#define SCOND_FAIL_RETRY_VAR_DEF						\
-	unsigned int delay = 1, tmp;						\
-
-#define SCOND_FAIL_RETRY_ASM							\
-	"	bz	4f			\n"				\
-	"   ; --- scond fail delay ---		\n"				\
-	"	mov	%[tmp], %[delay]	\n"	/* tmp = delay */	\
-	"2: 	brne.d	%[tmp], 0, 2b		\n"	/* while (tmp != 0) */	\
-	"	sub	%[tmp], %[tmp], 1	\n"	/* tmp-- */		\
-	"	rol	%[delay], %[delay]	\n"	/* delay *= 2 */	\
-	"	b	1b			\n"	/* start over */	\
-	"4: ; --- success ---			\n"				\
-
-#define SCOND_FAIL_RETRY_VARS							\
-	  ,[delay] "+&r" (delay),[tmp] "=&r"	(tmp)				\
-
-#else	/* !CONFIG_ARC_STAR_9000923308 */
-
-#define SCOND_FAIL_RETRY_VAR_DEF
-
-#define SCOND_FAIL_RETRY_ASM							\
-	"	bnz     1b			\n"				\
-
-#define SCOND_FAIL_RETRY_VARS
-
-#endif
-
 #define ATOMIC_OP(op, c_op, asm_op)					\
 static inline void atomic_##op(int i, atomic_t *v)			\
 {									\
-	unsigned int val;				                \
-	SCOND_FAIL_RETRY_VAR_DEF                                        \
+	unsigned int val;						\
 									\
 	__asm__ __volatile__(						\
 	"1:	llock   %[val], [%[ctr]]		\n"		\
 	"	" #asm_op " %[val], %[val], %[i]	\n"		\
 	"	scond   %[val], [%[ctr]]		\n"		\
-	"						\n"		\
-	SCOND_FAIL_RETRY_ASM						\
-									\
+	"	bnz     1b				\n"		\
 	: [val]	"=&r"	(val) /* Early clobber to prevent reg reuse */	\
-	  SCOND_FAIL_RETRY_VARS						\
 	: [ctr]	"r"	(&v->counter), /* Not "m": llock only supports reg direct addr mode */	\
 	  [i]	"ir"	(i)						\
 	: "cc");							\
@@ -77,8 +44,7 @@ static inline void atomic_##op(int i, atomic_t *v)			\
 #define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
 static inline int atomic_##op##_return(int i, atomic_t *v)		\
 {									\
-	unsigned int val;				                \
-	SCOND_FAIL_RETRY_VAR_DEF                                        \
+	unsigned int val;						\
 									\
 	/*								\
 	 * Explicit full memory barrier needed before/after as		\
@@ -90,11 +56,8 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 	"1:	llock   %[val], [%[ctr]]		\n"		\
 	"	" #asm_op " %[val], %[val], %[i]	\n"		\
 	"	scond   %[val], [%[ctr]]		\n"		\
-	"						\n"		\
-	SCOND_FAIL_RETRY_ASM						\
-									\
+	"	bnz     1b				\n"		\
 	: [val]	"=&r"	(val)						\
-	  SCOND_FAIL_RETRY_VARS						\
 	: [ctr]	"r"	(&v->counter),					\
 	  [i]	"ir"	(i)						\
 	: "cc");							\

arch/arc/include/asm/entry-compact.h

@@ -76,8 +76,8 @@
 	 * We need to be a bit more cautious here. What if a kernel bug in
 	 * L1 ISR, caused SP to go whaco (some small value which looks like
 	 * USER stk) and then we take L2 ISR.
-	 * Above brlo alone would treat it as a valid L1-L2 sceanrio
-	 * instead of shouting alound
+	 * Above brlo alone would treat it as a valid L1-L2 scenario
+	 * instead of shouting around
 	 * The only feasible way is to make sure this L2 happened in
 	 * L1 prelogue ONLY i.e. ilink2 is less than a pre-set marker in
 	 * L1 ISR before it switches stack

arch/arc/include/asm/mmu_context.h

@@ -83,7 +83,7 @@ static inline void get_new_mmu_context(struct mm_struct *mm)
 		local_flush_tlb_all();
 
 		/*
-		 * Above checke for rollover of 8 bit ASID in 32 bit container.
+		 * Above check for rollover of 8 bit ASID in 32 bit container.
 		 * If the container itself wrapped around, set it to a non zero
 		 * "generation" to distinguish from no context
 		 */

arch/arc/include/asm/pgtable.h

@@ -47,7 +47,7 @@
  * Page Tables are purely for Linux VM's consumption and the bits below are
  * suited to that (uniqueness). Hence some are not implemented in the TLB and
  * some have different value in TLB.
- * e.g. MMU v2: K_READ bit is 8 and so is GLOBAL (possible becoz they live in
+ * e.g. MMU v2: K_READ bit is 8 and so is GLOBAL (possible because they live in
  *      seperate PD0 and PD1, which combined forms a translation entry)
  *      while for PTE perspective, they are 8 and 9 respectively
  * with MMU v3: Most bits (except SHARED) represent the exact hardware pos

arch/arc/include/asm/processor.h

@@ -78,7 +78,7 @@ struct task_struct;
 #define KSTK_ESP(tsk)   (task_pt_regs(tsk)->sp)
 
 /*
- * Where abouts of Task's sp, fp, blink when it was last seen in kernel mode.
+ * Where about of Task's sp, fp, blink when it was last seen in kernel mode.
  * Look in process.c for details of kernel stack layout
  */
 #define TSK_K_ESP(tsk)		(tsk->thread.ksp)

arch/arc/include/asm/smp.h

@@ -86,7 +86,7 @@ static inline const char *arc_platform_smp_cpuinfo(void)
  * (1) These insn were introduced only in 4.10 release. So for older released
  *	support needed.
  *
- * (2) In a SMP setup, the LLOCK/SCOND atomiticity across CPUs needs to be
+ * (2) In a SMP setup, the LLOCK/SCOND atomicity across CPUs needs to be
  *	gaurantted by the platform (not something which core handles).
  *	Assuming a platform won't, SMP Linux needs to use spinlocks + local IRQ
  *	disabling for atomicity.

arch/arc/include/asm/spinlock.h

@@ -20,11 +20,6 @@
 
 #ifdef CONFIG_ARC_HAS_LLSC
 
-/*
- * A normal LLOCK/SCOND based system, w/o need for livelock workaround
- */
-#ifndef CONFIG_ARC_STAR_9000923308
-
 static inline void arch_spin_lock(arch_spinlock_t *lock)
 {
 	unsigned int val;
@@ -238,293 +233,6 @@ static inline void arch_write_unlock(arch_rwlock_t *rw)
 	smp_mb();
 }
 
-#else	/* CONFIG_ARC_STAR_9000923308 */
-
-/*
- * HS38x4 could get into a LLOCK/SCOND livelock in case of multiple overlapping
- * coherency transactions in the SCU. The exclusive line state keeps rotating
- * among contenting cores leading to a never ending cycle. So break the cycle
- * by deferring the retry of failed exclusive access (SCOND). The actual delay
- * needed is function of number of contending cores as well as the unrelated
- * coherency traffic from other cores. To keep the code simple, start off with
- * small delay of 1 which would suffice most cases and in case of contention
- * double the delay. Eventually the delay is sufficient such that the coherency
- * pipeline is drained, thus a subsequent exclusive access would succeed.
- */
-
-#define SCOND_FAIL_RETRY_VAR_DEF						\
-	unsigned int delay, tmp;						\
-
-#define SCOND_FAIL_RETRY_ASM							\
-	"   ; --- scond fail delay ---		\n"				\
-	"	mov	%[tmp], %[delay]	\n"	/* tmp = delay */	\
-	"2: 	brne.d	%[tmp], 0, 2b		\n"	/* while (tmp != 0) */	\
-	"	sub	%[tmp], %[tmp], 1	\n"	/* tmp-- */		\
-	"	rol	%[delay], %[delay]	\n"	/* delay *= 2 */	\
-	"	b	1b			\n"	/* start over */	\
-	"					\n"				\
-	"4: ; --- done ---			\n"				\
-
-#define SCOND_FAIL_RETRY_VARS							\
-	  ,[delay] "=&r" (delay), [tmp] "=&r"	(tmp)				\
-
-static inline void arch_spin_lock(arch_spinlock_t *lock)
-{
-	unsigned int val;
-	SCOND_FAIL_RETRY_VAR_DEF;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"0:	mov	%[delay], 1		\n"
-	"1:	llock	%[val], [%[slock]]	\n"
-	"	breq	%[val], %[LOCKED], 0b	\n"	/* spin while LOCKED */
-	"	scond	%[LOCKED], [%[slock]]	\n"	/* acquire */
-	"	bz	4f			\n"	/* done */
-	"					\n"
-	SCOND_FAIL_RETRY_ASM
-
-	: [val]		"=&r"	(val)
-	  SCOND_FAIL_RETRY_VARS
-	: [slock]	"r"	(&(lock->slock)),
-	  [LOCKED]	"r"	(__ARCH_SPIN_LOCK_LOCKED__)
-	: "memory", "cc");
-
-	smp_mb();
-}
-
-/* 1 - lock taken successfully */
-static inline int arch_spin_trylock(arch_spinlock_t *lock)
-{
-	unsigned int val, got_it = 0;
-	SCOND_FAIL_RETRY_VAR_DEF;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"0:	mov	%[delay], 1		\n"
-	"1:	llock	%[val], [%[slock]]	\n"
-	"	breq	%[val], %[LOCKED], 4f	\n"	/* already LOCKED, just bail */
-	"	scond	%[LOCKED], [%[slock]]	\n"	/* acquire */
-	"	bz.d	4f			\n"
-	"	mov.z	%[got_it], 1		\n"	/* got it */
-	"					\n"
-	SCOND_FAIL_RETRY_ASM
-
-	: [val]		"=&r"	(val),
-	  [got_it]	"+&r"	(got_it)
-	  SCOND_FAIL_RETRY_VARS
-	: [slock]	"r"	(&(lock->slock)),
-	  [LOCKED]	"r"	(__ARCH_SPIN_LOCK_LOCKED__)
-	: "memory", "cc");
-
-	smp_mb();
-
-	return got_it;
-}
-
-static inline void arch_spin_unlock(arch_spinlock_t *lock)
-{
-	smp_mb();
-
-	lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
-
-	smp_mb();
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers but only one writer.
- * Unfair locking as Writers could be starved indefinitely by Reader(s)
- */
-
-static inline void arch_read_lock(arch_rwlock_t *rw)
-{
-	unsigned int val;
-	SCOND_FAIL_RETRY_VAR_DEF;
-
-	smp_mb();
-
-	/*
-	 * zero means writer holds the lock exclusively, deny Reader.
-	 * Otherwise grant lock to first/subseq reader
-	 *
-	 * 	if (rw->counter > 0) {
-	 *		rw->counter--;
-	 *		ret = 1;
-	 *	}
-	 */
-
-	__asm__ __volatile__(
-	"0:	mov	%[delay], 1		\n"
-	"1:	llock	%[val], [%[rwlock]]	\n"
-	"	brls	%[val], %[WR_LOCKED], 0b\n"	/* <= 0: spin while write locked */
-	"	sub	%[val], %[val], 1	\n"	/* reader lock */
-	"	scond	%[val], [%[rwlock]]	\n"
-	"	bz	4f			\n"	/* done */
-	"					\n"
-	SCOND_FAIL_RETRY_ASM
-
-	: [val]		"=&r"	(val)
-	  SCOND_FAIL_RETRY_VARS
-	: [rwlock]	"r"	(&(rw->counter)),
-	  [WR_LOCKED]	"ir"	(0)
-	: "memory", "cc");
-
-	smp_mb();
-}
-
-/* 1 - lock taken successfully */
-static inline int arch_read_trylock(arch_rwlock_t *rw)
-{
-	unsigned int val, got_it = 0;
-	SCOND_FAIL_RETRY_VAR_DEF;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"0:	mov	%[delay], 1		\n"
-	"1:	llock	%[val], [%[rwlock]]	\n"
-	"	brls	%[val], %[WR_LOCKED], 4f\n"	/* <= 0: already write locked, bail */
-	"	sub	%[val], %[val], 1	\n"	/* counter-- */
-	"	scond	%[val], [%[rwlock]]	\n"
-	"	bz.d	4f			\n"
-	"	mov.z	%[got_it], 1		\n"	/* got it */
-	"					\n"
-	SCOND_FAIL_RETRY_ASM
-
-	: [val]		"=&r"	(val),
-	  [got_it]	"+&r"	(got_it)
-	  SCOND_FAIL_RETRY_VARS
-	: [rwlock]	"r"	(&(rw->counter)),
-	  [WR_LOCKED]	"ir"	(0)
-	: "memory", "cc");
-
-	smp_mb();
-
-	return got_it;
-}
-
-static inline void arch_write_lock(arch_rwlock_t *rw)
-{
-	unsigned int val;
-	SCOND_FAIL_RETRY_VAR_DEF;
-
-	smp_mb();
-
-	/*
-	 * If reader(s) hold lock (lock < __ARCH_RW_LOCK_UNLOCKED__),
-	 * deny writer. Otherwise if unlocked grant to writer
-	 * Hence the claim that Linux rwlocks are unfair to writers.
-	 * (can be starved for an indefinite time by readers).
-	 *
-	 *	if (rw->counter == __ARCH_RW_LOCK_UNLOCKED__) {
-	 *		rw->counter = 0;
-	 *		ret = 1;
-	 *	}
-	 */
-
-	__asm__ __volatile__(
-	"0:	mov	%[delay], 1		\n"
-	"1:	llock	%[val], [%[rwlock]]	\n"
-	"	brne	%[val], %[UNLOCKED], 0b	\n"	/* while !UNLOCKED spin */
-	"	mov	%[val], %[WR_LOCKED]	\n"
-	"	scond	%[val], [%[rwlock]]	\n"
-	"	bz	4f			\n"
-	"					\n"
-	SCOND_FAIL_RETRY_ASM
-
-	: [val]		"=&r"	(val)
-	  SCOND_FAIL_RETRY_VARS
-	: [rwlock]	"r"	(&(rw->counter)),
-	  [UNLOCKED]	"ir"	(__ARCH_RW_LOCK_UNLOCKED__),
-	  [WR_LOCKED]	"ir"	(0)
-	: "memory", "cc");
-
-	smp_mb();
-}
-
-/* 1 - lock taken successfully */
-static inline int arch_write_trylock(arch_rwlock_t *rw)
-{
-	unsigned int val, got_it = 0;
-	SCOND_FAIL_RETRY_VAR_DEF;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"0:	mov	%[delay], 1		\n"
-	"1:	llock	%[val], [%[rwlock]]	\n"
-	"	brne	%[val], %[UNLOCKED], 4f	\n"	/* !UNLOCKED, bail */
-	"	mov	%[val], %[WR_LOCKED]	\n"
-	"	scond	%[val], [%[rwlock]]	\n"
-	"	bz.d	4f			\n"
-	"	mov.z	%[got_it], 1		\n"	/* got it */
-	"					\n"
-	SCOND_FAIL_RETRY_ASM
-
-	: [val]		"=&r"	(val),
-	  [got_it]	"+&r"	(got_it)
-	  SCOND_FAIL_RETRY_VARS
-	: [rwlock]	"r"	(&(rw->counter)),
-	  [UNLOCKED]	"ir"	(__ARCH_RW_LOCK_UNLOCKED__),
-	  [WR_LOCKED]	"ir"	(0)
-	: "memory", "cc");
-
-	smp_mb();
-
-	return got_it;
-}
-
-static inline void arch_read_unlock(arch_rwlock_t *rw)
-{
-	unsigned int val;
-
-	smp_mb();
-
-	/*
-	 * rw->counter++;
-	 */
-	__asm__ __volatile__(
-	"1:	llock	%[val], [%[rwlock]]	\n"
-	"	add	%[val], %[val], 1	\n"
-	"	scond	%[val], [%[rwlock]]	\n"
-	"	bnz	1b			\n"
-	"					\n"
-	: [val]		"=&r"	(val)
-	: [rwlock]	"r"	(&(rw->counter))
-	: "memory", "cc");
-
-	smp_mb();
-}
-
-static inline void arch_write_unlock(arch_rwlock_t *rw)
-{
-	unsigned int val;
-
-	smp_mb();
-
-	/*
-	 * rw->counter = __ARCH_RW_LOCK_UNLOCKED__;
-	 */
-	__asm__ __volatile__(
-	"1:	llock	%[val], [%[rwlock]]	\n"
-	"	scond	%[UNLOCKED], [%[rwlock]]\n"
-	"	bnz	1b			\n"
-	"					\n"
-	: [val]		"=&r"	(val)
-	: [rwlock]	"r"	(&(rw->counter)),
-	  [UNLOCKED]	"r"	(__ARCH_RW_LOCK_UNLOCKED__)
-	: "memory", "cc");
-
-	smp_mb();
-}
-
-#undef SCOND_FAIL_RETRY_VAR_DEF
-#undef SCOND_FAIL_RETRY_ASM
-#undef SCOND_FAIL_RETRY_VARS
-
-#endif	/* CONFIG_ARC_STAR_9000923308 */
-
 #else	/* !CONFIG_ARC_HAS_LLSC */
 
 static inline void arch_spin_lock(arch_spinlock_t *lock)

arch/arc/include/asm/thread_info.h

@@ -103,7 +103,7 @@ static inline __attribute_const__ struct thread_info *current_thread_info(void)
 
 /*
  * _TIF_ALLWORK_MASK includes SYSCALL_TRACE, but we don't need it.
- * SYSCALL_TRACE is anways seperately/unconditionally tested right after a
+ * SYSCALL_TRACE is anyway seperately/unconditionally tested right after a
  * syscall, so all that reamins to be tested is _TIF_WORK_MASK
  */
 

arch/arc/include/asm/uaccess.h

@@ -32,7 +32,7 @@
 #define __kernel_ok		(segment_eq(get_fs(), KERNEL_DS))
 
 /*
- * Algorthmically, for __user_ok() we want do:
+ * Algorithmically, for __user_ok() we want do:
  * 	(start < TASK_SIZE) && (start+len < TASK_SIZE)
  * where TASK_SIZE could either be retrieved from thread_info->addr_limit or
  * emitted directly in code.

arch/arc/include/uapi/asm/swab.h

@@ -74,7 +74,7 @@
 	__tmp ^ __in;						\
 })
 
-#elif (ARC_BSWAP_TYPE == 2)	/* Custom single cycle bwap instruction */
+#elif (ARC_BSWAP_TYPE == 2)	/* Custom single cycle bswap instruction */
 
 #define __arch_swab32(x)						\
 ({									\

arch/arc/kernel/entry-compact.S

@@ -91,27 +91,13 @@ VECTOR   mem_service             ; 0x8, Mem exception   (0x1)
 VECTOR   instr_service           ; 0x10, Instrn Error   (0x2)
 
 ; ******************** Device ISRs **********************
-#ifdef CONFIG_ARC_IRQ3_LV2
-VECTOR   handle_interrupt_level2
-#else
-VECTOR   handle_interrupt_level1
-#endif
-
-VECTOR   handle_interrupt_level1
-
-#ifdef CONFIG_ARC_IRQ5_LV2
-VECTOR   handle_interrupt_level2
-#else
-VECTOR   handle_interrupt_level1
-#endif
-
-#ifdef CONFIG_ARC_IRQ6_LV2
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
 VECTOR   handle_interrupt_level2
 #else
 VECTOR   handle_interrupt_level1
 #endif
 
-.rept   25
+.rept   28
 VECTOR   handle_interrupt_level1 ; Other devices
 .endr
 

arch/arc/kernel/intc-compact.c

@@ -28,10 +28,8 @@ void arc_init_IRQ(void)
 {
 	int level_mask = 0;
 
-       /* setup any high priority Interrupts (Level2 in ARCompact jargon) */
-	level_mask |= IS_ENABLED(CONFIG_ARC_IRQ3_LV2) << 3;
-	level_mask |= IS_ENABLED(CONFIG_ARC_IRQ5_LV2) << 5;
-	level_mask |= IS_ENABLED(CONFIG_ARC_IRQ6_LV2) << 6;
+       /* Is timer high priority Interrupt (Level2 in ARCompact jargon) */
+	level_mask |= IS_ENABLED(CONFIG_ARC_COMPACT_IRQ_LEVELS) << TIMER0_IRQ;
 
 	/*
 	 * Write to register, even if no LV2 IRQs configured to reset it

arch/arc/kernel/perf_event.c

@@ -108,7 +108,7 @@ static void arc_perf_event_update(struct perf_event *event,
 	int64_t delta = new_raw_count - prev_raw_count;
 
 	/*
-	 * We don't afaraid of hwc->prev_count changing beneath our feet
+	 * We aren't afraid of hwc->prev_count changing beneath our feet
 	 * because there's no way for us to re-enter this function anytime.
 	 */
 	local64_set(&hwc->prev_count, new_raw_count);

arch/arc/kernel/setup.c

@@ -392,7 +392,7 @@ void __init setup_arch(char **cmdline_p)
 		/*
 		 * If we are here, it is established that @uboot_arg didn't
 		 * point to DT blob. Instead if u-boot says it is cmdline,
-		 * Appent to embedded DT cmdline.
+		 * append to embedded DT cmdline.
 		 * setup_machine_fdt() would have populated @boot_command_line
 		 */
 		if (uboot_tag == 1) {

arch/arc/kernel/signal.c

@@ -34,7 +34,7 @@
  *  -ViXS were still seeing crashes when using insmod to load drivers.
  *   It turned out that the code to change Execute permssions for TLB entries
  *   of user was not guarded for interrupts (mod_tlb_permission)
- *   This was cauing TLB entries to be overwritten on unrelated indexes
+ *   This was causing TLB entries to be overwritten on unrelated indexes
  *
  * Vineetg: July 15th 2008: Bug #94183
  *  -Exception happens in Delay slot of a JMP, and before user space resumes,

arch/arc/kernel/troubleshoot.c

@@ -276,7 +276,7 @@ static int tlb_stats_open(struct inode *inode, struct file *file)
 	return 0;
 }
 
-/* called on user read(): display the couters */
+/* called on user read(): display the counters */
 static ssize_t tlb_stats_output(struct file *file,	/* file descriptor */
 				char __user *user_buf,	/* user buffer */
 				size_t len,		/* length of buffer */

arch/arc/mm/cache.c

@@ -215,7 +215,7 @@ void read_decode_cache_bcr(void)
  * ------------------
  * This ver of MMU supports variable page sizes (1k-16k): although Linux will
  * only support 8k (default), 16k and 4k.
- * However from hardware perspective, smaller page sizes aggrevate aliasing
+ * However from hardware perspective, smaller page sizes aggravate aliasing
  * meaning more vaddr bits needed to disambiguate the cache-line-op ;
  * the existing scheme of piggybacking won't work for certain configurations.
  * Two new registers IC_PTAG and DC_PTAG inttoduced.
@@ -302,7 +302,7 @@ void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
 
 	/*
 	 * This is technically for MMU v4, using the MMU v3 programming model
-	 * Special work for HS38 aliasing I-cache configuratino with PAE40
+	 * Special work for HS38 aliasing I-cache configuration with PAE40
 	 *   - upper 8 bits of paddr need to be written into PTAG_HI
 	 *   - (and needs to be written before the lower 32 bits)
 	 * Note that PTAG_HI is hoisted outside the line loop
@@ -936,7 +936,7 @@ void arc_cache_init(void)
 			      ic->ver, CONFIG_ARC_MMU_VER);
 
 		/*
-		 * In MMU v4 (HS38x) the alising icache config uses IVIL/PTAG
+		 * In MMU v4 (HS38x) the aliasing icache config uses IVIL/PTAG
 		 * pair to provide vaddr/paddr respectively, just as in MMU v3
 		 */
 		if (is_isa_arcv2() && ic->alias)

arch/arc/mm/dma.c

@@ -10,7 +10,7 @@
  * DMA Coherent API Notes
  *
  * I/O is inherently non-coherent on ARC. So a coherent DMA buffer is
- * implemented by accessintg it using a kernel virtual address, with
+ * implemented by accessing it using a kernel virtual address, with
  * Cache bit off in the TLB entry.
  *
  * The default DMA address == Phy address which is 0x8000_0000 based.

arch/arm/mach-vexpress/spc.c

@@ -547,7 +547,7 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev)
 
 	init.name = dev_name(cpu_dev);
 	init.ops = &clk_spc_ops;
-	init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE;
+	init.flags = CLK_GET_RATE_NOCACHE;
 	init.num_parents = 0;
 
 	return devm_clk_register(cpu_dev, &spc->hw);

arch/arm64/mm/fault.c

@@ -109,7 +109,7 @@ int ptep_set_access_flags(struct vm_area_struct *vma,
 	 * PTE_RDONLY is cleared by default in the asm below, so set it in
 	 * back if necessary (read-only or clean PTE).
 	 */
-	if (!pte_write(entry) || !dirty)
+	if (!pte_write(entry) || !pte_sw_dirty(entry))
 		pte_val(entry) |= PTE_RDONLY;
 
 	/*

arch/powerpc/include/asm/nohash/64/pgalloc.h

@@ -172,7 +172,7 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
 
 static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
 {
-	pte_fragment_fre((unsigned long *)pte, 1);
+	pte_fragment_free((unsigned long *)pte, 1);
 }
 
 static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)

arch/powerpc/kernel/prom_init.c

@@ -719,7 +719,7 @@ unsigned char ibm_architecture_vec[] = {
 	 * must match by the macro below. Update the definition if
 	 * the structure layout changes.
 	 */
-#define IBM_ARCH_VEC_NRCORES_OFFSET	125
+#define IBM_ARCH_VEC_NRCORES_OFFSET	133
 	W(NR_CPUS),			/* number of cores supported */
 	0,
 	0,

arch/powerpc/kernel/ptrace.c

@@ -377,7 +377,7 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset,
 
 #else
 	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
-		     offsetof(struct thread_fp_state, fpr[32][0]));
+		     offsetof(struct thread_fp_state, fpr[32]));
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				   &target->thread.fp_state, 0, -1);
@@ -405,7 +405,7 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 	return 0;
 #else
 	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
-		     offsetof(struct thread_fp_state, fpr[32][0]));
+		     offsetof(struct thread_fp_state, fpr[32]));
 
 	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				  &target->thread.fp_state, 0, -1);

arch/powerpc/mm/hash_native_64.c

@@ -550,7 +550,11 @@ static void hpte_decode(struct hash_pte *hpte, unsigned long slot,
 		}
 	}
 	/* This works for all page sizes, and for 256M and 1T segments */
-	*ssize = hpte_v >> HPTE_V_SSIZE_SHIFT;
+	if (cpu_has_feature(CPU_FTR_ARCH_300))
+		*ssize = hpte_r >> HPTE_R_3_0_SSIZE_SHIFT;
+	else
+		*ssize = hpte_v >> HPTE_V_SSIZE_SHIFT;
+
 	shift = mmu_psize_defs[size].shift;
 
 	avpn = (HPTE_V_AVPN_VAL(hpte_v) & ~mmu_psize_defs[size].avpnm);

arch/powerpc/mm/tlb-radix.c

@@ -117,7 +117,7 @@ static inline void _tlbie_va(unsigned long va, unsigned long pid,
  */
 void radix__local_flush_tlb_mm(struct mm_struct *mm)
 {
-	unsigned int pid;
+	unsigned long pid;
 
 	preempt_disable();
 	pid = mm->context.id;
@@ -130,7 +130,7 @@ EXPORT_SYMBOL(radix__local_flush_tlb_mm);
 void radix___local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
 			    unsigned long ap, int nid)
 {
-	unsigned int pid;
+	unsigned long pid;
 
 	preempt_disable();
 	pid = mm ? mm->context.id : 0;
@@ -160,7 +160,7 @@ static int mm_is_core_local(struct mm_struct *mm)
 
 void radix__flush_tlb_mm(struct mm_struct *mm)
 {
-	unsigned int pid;
+	unsigned long pid;
 
 	preempt_disable();
 	pid = mm->context.id;
@@ -185,7 +185,7 @@ EXPORT_SYMBOL(radix__flush_tlb_mm);
 void radix___flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
 		       unsigned long ap, int nid)
 {
-	unsigned int pid;
+	unsigned long pid;
 
 	preempt_disable();
 	pid = mm ? mm->context.id : 0;

arch/powerpc/platforms/512x/clock-commonclk.c

@@ -221,7 +221,7 @@ static bool soc_has_mclk_mux0_canin(void)
 /* convenience wrappers around the common clk API */
 static inline struct clk *mpc512x_clk_fixed(const char *name, int rate)
 {
-	return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+	return clk_register_fixed_rate(NULL, name, NULL, 0, rate);
 }
 
 static inline struct clk *mpc512x_clk_factor(

arch/powerpc/platforms/cell/spufs/coredump.c

@@ -172,7 +172,7 @@ static int spufs_arch_write_note(struct spu_context *ctx, int i,
 	if (rc < 0)
 		goto out;
 
-	skip = roundup(cprm->file->f_pos - total + sz, 4) - cprm->file->f_pos;
+	skip = roundup(cprm->pos - total + sz, 4) - cprm->pos;
 	if (!dump_skip(cprm, skip))
 		goto Eio;
 out:

arch/powerpc/platforms/pseries/iommu.c

@@ -927,7 +927,7 @@ static int query_ddw(struct pci_dev *dev, const u32 *ddw_avail,
 	dn = pci_device_to_OF_node(dev);
 	pdn = PCI_DN(dn);
 	buid = pdn->phb->buid;
-	cfg_addr = (pdn->busno << 8) | pdn->devfn;
+	cfg_addr = ((pdn->busno << 16) | (pdn->devfn << 8));
 
 	ret = rtas_call(ddw_avail[0], 3, 5, (u32 *)query,
 		  cfg_addr, BUID_HI(buid), BUID_LO(buid));
@@ -956,7 +956,7 @@ static int create_ddw(struct pci_dev *dev, const u32 *ddw_avail,
 	dn = pci_device_to_OF_node(dev);
 	pdn = PCI_DN(dn);
 	buid = pdn->phb->buid;
-	cfg_addr = (pdn->busno << 8) | pdn->devfn;
+	cfg_addr = ((pdn->busno << 16) | (pdn->devfn << 8));
 
 	do {
 		/* extra outputs are LIOBN and dma-addr (hi, lo) */

arch/x86/boot/Makefile

@@ -162,6 +162,9 @@ isoimage: $(obj)/bzImage
 	for i in lib lib64 share end ; do \
 		if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
 			cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
+			if [ -f /usr/$$i/syslinux/ldlinux.c32 ]; then \
+				cp /usr/$$i/syslinux/ldlinux.c32 $(obj)/isoimage ; \
+			fi ; \
 			break ; \
 		fi ; \
 		if [ $$i = end ] ; then exit 1 ; fi ; \

arch/x86/events/intel/rapl.c

@@ -714,7 +714,7 @@ static void cleanup_rapl_pmus(void)
 	int i;
 
 	for (i = 0; i < rapl_pmus->maxpkg; i++)
-		kfree(rapl_pmus->pmus + i);
+		kfree(rapl_pmus->pmus[i]);
 	kfree(rapl_pmus);
 }
 

arch/x86/events/intel/uncore_snbep.c

@@ -2868,27 +2868,10 @@ static struct intel_uncore_type bdx_uncore_cbox = {
 	.format_group		= &hswep_uncore_cbox_format_group,
 };
 
-static struct intel_uncore_type bdx_uncore_sbox = {
-	.name			= "sbox",
-	.num_counters		= 4,
-	.num_boxes		= 4,
-	.perf_ctr_bits		= 48,
-	.event_ctl		= HSWEP_S0_MSR_PMON_CTL0,
-	.perf_ctr		= HSWEP_S0_MSR_PMON_CTR0,
-	.event_mask		= HSWEP_S_MSR_PMON_RAW_EVENT_MASK,
-	.box_ctl		= HSWEP_S0_MSR_PMON_BOX_CTL,
-	.msr_offset		= HSWEP_SBOX_MSR_OFFSET,
-	.ops			= &hswep_uncore_sbox_msr_ops,
-	.format_group		= &hswep_uncore_sbox_format_group,
-};
-
-#define BDX_MSR_UNCORE_SBOX	3
-
 static struct intel_uncore_type *bdx_msr_uncores[] = {
 	&bdx_uncore_ubox,
 	&bdx_uncore_cbox,
 	&hswep_uncore_pcu,
-	&bdx_uncore_sbox,
 	NULL,
 };
 
@@ -2897,10 +2880,6 @@ void bdx_uncore_cpu_init(void)
 	if (bdx_uncore_cbox.num_boxes > boot_cpu_data.x86_max_cores)
 		bdx_uncore_cbox.num_boxes = boot_cpu_data.x86_max_cores;
 	uncore_msr_uncores = bdx_msr_uncores;
-
-	/* BDX-DE doesn't have SBOX */
-	if (boot_cpu_data.x86_model == 86)
-		uncore_msr_uncores[BDX_MSR_UNCORE_SBOX] = NULL;
 }
 
 static struct intel_uncore_type bdx_uncore_ha = {

arch/x86/include/asm/intel-family.h

+#ifndef _ASM_X86_INTEL_FAMILY_H
+#define _ASM_X86_INTEL_FAMILY_H
+
+/*
+ * "Big Core" Processors (Branded as Core, Xeon, etc...)
+ *
+ * The "_X" parts are generally the EP and EX Xeons, or the
+ * "Extreme" ones, like Broadwell-E.
+ *
+ * Things ending in "2" are usually because we have no better
+ * name for them.  There's no processor called "WESTMERE2".
+ */
+
+#define INTEL_FAM6_CORE_YONAH		0x0E
+#define INTEL_FAM6_CORE2_MEROM		0x0F
+#define INTEL_FAM6_CORE2_MEROM_L	0x16
+#define INTEL_FAM6_CORE2_PENRYN		0x17
+#define INTEL_FAM6_CORE2_DUNNINGTON	0x1D
+
+#define INTEL_FAM6_NEHALEM		0x1E
+#define INTEL_FAM6_NEHALEM_EP		0x1A
+#define INTEL_FAM6_NEHALEM_EX		0x2E
+#define INTEL_FAM6_WESTMERE		0x25
+#define INTEL_FAM6_WESTMERE2		0x1F
+#define INTEL_FAM6_WESTMERE_EP		0x2C
+#define INTEL_FAM6_WESTMERE_EX		0x2F
+
+#define INTEL_FAM6_SANDYBRIDGE		0x2A
+#define INTEL_FAM6_SANDYBRIDGE_X	0x2D
+#define INTEL_FAM6_IVYBRIDGE		0x3A
+#define INTEL_FAM6_IVYBRIDGE_X		0x3E
+
+#define INTEL_FAM6_HASWELL_CORE		0x3C
+#define INTEL_FAM6_HASWELL_X		0x3F
+#define INTEL_FAM6_HASWELL_ULT		0x45
+#define INTEL_FAM6_HASWELL_GT3E		0x46
+
+#define INTEL_FAM6_BROADWELL_CORE	0x3D
+#define INTEL_FAM6_BROADWELL_XEON_D	0x56
+#define INTEL_FAM6_BROADWELL_GT3E	0x47
+#define INTEL_FAM6_BROADWELL_X		0x4F
+
+#define INTEL_FAM6_SKYLAKE_MOBILE	0x4E
+#define INTEL_FAM6_SKYLAKE_DESKTOP	0x5E
+#define INTEL_FAM6_SKYLAKE_X		0x55
+#define INTEL_FAM6_KABYLAKE_MOBILE	0x8E
+#define INTEL_FAM6_KABYLAKE_DESKTOP	0x9E
+
+/* "Small Core" Processors (Atom) */
+
+#define INTEL_FAM6_ATOM_PINEVIEW	0x1C
+#define INTEL_FAM6_ATOM_LINCROFT	0x26
+#define INTEL_FAM6_ATOM_PENWELL		0x27
+#define INTEL_FAM6_ATOM_CLOVERVIEW	0x35
+#define INTEL_FAM6_ATOM_CEDARVIEW	0x36
+#define INTEL_FAM6_ATOM_SILVERMONT1	0x37 /* BayTrail/BYT / Valleyview */
+#define INTEL_FAM6_ATOM_SILVERMONT2	0x4D /* Avaton/Rangely */
+#define INTEL_FAM6_ATOM_AIRMONT		0x4C /* CherryTrail / Braswell */
+#define INTEL_FAM6_ATOM_MERRIFIELD1	0x4A /* Tangier */
+#define INTEL_FAM6_ATOM_MERRIFIELD2	0x5A /* Annidale */
+#define INTEL_FAM6_ATOM_GOLDMONT	0x5C
+#define INTEL_FAM6_ATOM_DENVERTON	0x5F /* Goldmont Microserver */
+
+/* Xeon Phi */
+
+#define INTEL_FAM6_XEON_PHI_KNL		0x57 /* Knights Landing */
+
+#endif /* _ASM_X86_INTEL_FAMILY_H */

arch/x86/include/asm/msr.h

@@ -122,7 +122,7 @@ notrace static inline void native_write_msr(unsigned int msr,
 		     "2:\n"
 		     _ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_wrmsr_unsafe)
 		     : : "c" (msr), "a"(low), "d" (high) : "memory");
-	if (msr_tracepoint_active(__tracepoint_read_msr))
+	if (msr_tracepoint_active(__tracepoint_write_msr))
 		do_trace_write_msr(msr, ((u64)high << 32 | low), 0);
 }
 
@@ -141,7 +141,7 @@ notrace static inline int native_write_msr_safe(unsigned int msr,
 		     : "c" (msr), "0" (low), "d" (high),
 		       [fault] "i" (-EIO)
 		     : "memory");
-	if (msr_tracepoint_active(__tracepoint_read_msr))
+	if (msr_tracepoint_active(__tracepoint_write_msr))
 		do_trace_write_msr(msr, ((u64)high << 32 | low), err);
 	return err;
 }

arch/x86/kernel/apic/io_apic.c

@@ -2588,8 +2588,8 @@ static struct resource * __init ioapic_setup_resources(void)
 		res[num].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 		snprintf(mem, IOAPIC_RESOURCE_NAME_SIZE, "IOAPIC %u", i);
 		mem += IOAPIC_RESOURCE_NAME_SIZE;
+		ioapics[i].iomem_res = &res[num];
 		num++;
-		ioapics[i].iomem_res = res;
 	}
 
 	ioapic_resources = res;

arch/x86/kernel/cpu/amd.c

@@ -674,14 +674,14 @@ static void init_amd_bd(struct cpuinfo_x86 *c)
 	u64 value;
 
 	/* re-enable TopologyExtensions if switched off by BIOS */
-	if ((c->x86_model >= 0x10) && (c->x86_model <= 0x1f) &&
+	if ((c->x86_model >= 0x10) && (c->x86_model <= 0x6f) &&
 	    !cpu_has(c, X86_FEATURE_TOPOEXT)) {
 
 		if (msr_set_bit(0xc0011005, 54) > 0) {
 			rdmsrl(0xc0011005, value);
 			if (value & BIT_64(54)) {
 				set_cpu_cap(c, X86_FEATURE_TOPOEXT);
-				pr_info(FW_INFO "CPU: Re-enabling disabled Topology Extensions Support.\n");
+				pr_info_once(FW_INFO "CPU: Re-enabling disabled Topology Extensions Support.\n");
 			}
 		}
 	}

arch/x86/kernel/traps.c

@@ -96,6 +96,12 @@ static inline void cond_local_irq_disable(struct pt_regs *regs)
 		local_irq_disable();
 }
 
+/*
+ * In IST context, we explicitly disable preemption.  This serves two
+ * purposes: it makes it much less likely that we would accidentally
+ * schedule in IST context and it will force a warning if we somehow
+ * manage to schedule by accident.
+ */
 void ist_enter(struct pt_regs *regs)
 {
 	if (user_mode(regs)) {
@@ -110,13 +116,7 @@ void ist_enter(struct pt_regs *regs)
 		rcu_nmi_enter();
 	}
 
-	/*
-	 * We are atomic because we're on the IST stack; or we're on
-	 * x86_32, in which case we still shouldn't schedule; or we're
-	 * on x86_64 and entered from user mode, in which case we're
-	 * still atomic unless ist_begin_non_atomic is called.
-	 */
-	preempt_count_add(HARDIRQ_OFFSET);
+	preempt_disable();
 
 	/* This code is a bit fragile.  Test it. */
 	RCU_LOCKDEP_WARN(!rcu_is_watching(), "ist_enter didn't work");
@@ -124,7 +124,7 @@ void ist_enter(struct pt_regs *regs)
 
 void ist_exit(struct pt_regs *regs)
 {
-	preempt_count_sub(HARDIRQ_OFFSET);
+	preempt_enable_no_resched();
 
 	if (!user_mode(regs))
 		rcu_nmi_exit();
@@ -155,7 +155,7 @@ void ist_begin_non_atomic(struct pt_regs *regs)
 	BUG_ON((unsigned long)(current_top_of_stack() -
 			       current_stack_pointer()) >= THREAD_SIZE);
 
-	preempt_count_sub(HARDIRQ_OFFSET);
+	preempt_enable_no_resched();
 }
 
 /**
@@ -165,7 +165,7 @@ void ist_begin_non_atomic(struct pt_regs *regs)
  */
 void ist_end_non_atomic(void)
 {
-	preempt_count_add(HARDIRQ_OFFSET);
+	preempt_disable();
 }
 
 static nokprobe_inline int

block/blk-lib.c

@@ -113,6 +113,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector,
 		ret = submit_bio_wait(type, bio);
 		if (ret == -EOPNOTSUPP)
 			ret = 0;
+		bio_put(bio);
 	}
 	blk_finish_plug(&plug);
 
@@ -165,8 +166,10 @@ int blkdev_issue_write_same(struct block_device *bdev, sector_t sector,
 		}
 	}
 
-	if (bio)
+	if (bio) {
 		ret = submit_bio_wait(REQ_WRITE | REQ_WRITE_SAME, bio);
+		bio_put(bio);
+	}
 	return ret != -EOPNOTSUPP ? ret : 0;
 }
 EXPORT_SYMBOL(blkdev_issue_write_same);
@@ -206,8 +209,11 @@ static int __blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
 		}
 	}
 
-	if (bio)
-		return submit_bio_wait(WRITE, bio);
+	if (bio) {
+		ret = submit_bio_wait(WRITE, bio);
+		bio_put(bio);
+		return ret;
+	}
 	return 0;
 }
 

block/blk-mq.c

@@ -1262,12 +1262,9 @@ static blk_qc_t blk_mq_make_request(struct request_queue *q, struct bio *bio)
 
 	blk_queue_split(q, &bio, q->bio_split);
 
-	if (!is_flush_fua && !blk_queue_nomerges(q)) {
-		if (blk_attempt_plug_merge(q, bio, &request_count,
-					   &same_queue_rq))
-			return BLK_QC_T_NONE;
-	} else
-		request_count = blk_plug_queued_count(q);
+	if (!is_flush_fua && !blk_queue_nomerges(q) &&
+	    blk_attempt_plug_merge(q, bio, &request_count, &same_queue_rq))
+		return BLK_QC_T_NONE;
 
 	rq = blk_mq_map_request(q, bio, &data);
 	if (unlikely(!rq))
@@ -1358,9 +1355,11 @@ static blk_qc_t blk_sq_make_request(struct request_queue *q, struct bio *bio)
 
 	blk_queue_split(q, &bio, q->bio_split);
 
-	if (!is_flush_fua && !blk_queue_nomerges(q) &&
-	    blk_attempt_plug_merge(q, bio, &request_count, NULL))
-		return BLK_QC_T_NONE;
+	if (!is_flush_fua && !blk_queue_nomerges(q)) {
+		if (blk_attempt_plug_merge(q, bio, &request_count, NULL))
+			return BLK_QC_T_NONE;
+	} else
+		request_count = blk_plug_queued_count(q);
 
 	rq = blk_mq_map_request(q, bio, &data);
 	if (unlikely(!rq))

drivers/acpi/bus.c

@@ -1051,7 +1051,7 @@ static int __init acpi_bus_init(void)
 	 * Maybe EC region is required at bus_scan/acpi_get_devices. So it
 	 * is necessary to enable it as early as possible.
 	 */
-	acpi_boot_ec_enable();
+	acpi_ec_dsdt_probe();
 
 	printk(KERN_INFO PREFIX "Interpreter enabled\n");
 

drivers/acpi/ec.c

@@ -1446,10 +1446,30 @@ ec_parse_io_ports(struct acpi_resource *resource, void *context)
 	return AE_OK;
 }
 
-int __init acpi_boot_ec_enable(void)
+static const struct acpi_device_id ec_device_ids[] = {
+	{"PNP0C09", 0},
+	{"", 0},
+};
+
+int __init acpi_ec_dsdt_probe(void)
 {
-	if (!boot_ec)
+	acpi_status status;
+
+	if (boot_ec)
 		return 0;
+
+	/*
+	 * Finding EC from DSDT if there is no ECDT EC available. When this
+	 * function is invoked, ACPI tables have been fully loaded, we can
+	 * walk namespace now.
+	 */
+	boot_ec = make_acpi_ec();
+	if (!boot_ec)
+		return -ENOMEM;
+	status = acpi_get_devices(ec_device_ids[0].id,
+				  ec_parse_device, boot_ec, NULL);
+	if (ACPI_FAILURE(status) || !boot_ec->handle)
+		return -ENODEV;
 	if (!ec_install_handlers(boot_ec)) {
 		first_ec = boot_ec;
 		return 0;
@@ -1457,11 +1477,6 @@ int __init acpi_boot_ec_enable(void)
 	return -EFAULT;
 }
 
-static const struct acpi_device_id ec_device_ids[] = {
-	{"PNP0C09", 0},
-	{"", 0},
-};
-
 #if 0
 /*
  * Some EC firmware variations refuses to respond QR_EC when SCI_EVT is not

drivers/acpi/internal.h

@@ -181,7 +181,7 @@ typedef int (*acpi_ec_query_func) (void *data);
 
 int acpi_ec_init(void);
 int acpi_ec_ecdt_probe(void);
-int acpi_boot_ec_enable(void);
+int acpi_ec_dsdt_probe(void);
 void acpi_ec_block_transactions(void);
 void acpi_ec_unblock_transactions(void);
 void acpi_ec_unblock_transactions_early(void);

drivers/block/nbd.c

@@ -941,7 +941,7 @@ static int nbd_dev_dbg_init(struct nbd_device *nbd)
 	debugfs_create_u64("size_bytes", 0444, dir, &nbd->bytesize);
 	debugfs_create_u32("timeout", 0444, dir, &nbd->xmit_timeout);
 	debugfs_create_u32("blocksize", 0444, dir, &nbd->blksize);
-	debugfs_create_file("flags", 0444, dir, &nbd, &nbd_dbg_flags_ops);
+	debugfs_create_file("flags", 0444, dir, nbd, &nbd_dbg_flags_ops);
 
 	return 0;
 }

drivers/block/xen-blkfront.c

@@ -874,8 +874,12 @@ static int blkif_queue_rq(struct blk_mq_hw_ctx *hctx,
 			  const struct blk_mq_queue_data *qd)
 {
 	unsigned long flags;
-	struct blkfront_ring_info *rinfo = (struct blkfront_ring_info *)hctx->driver_data;
+	int qid = hctx->queue_num;
+	struct blkfront_info *info = hctx->queue->queuedata;
+	struct blkfront_ring_info *rinfo = NULL;
 
+	BUG_ON(info->nr_rings <= qid);
+	rinfo = &info->rinfo[qid];
 	blk_mq_start_request(qd->rq);
 	spin_lock_irqsave(&rinfo->ring_lock, flags);
 	if (RING_FULL(&rinfo->ring))
@@ -901,20 +905,9 @@ static int blkif_queue_rq(struct blk_mq_hw_ctx *hctx,
 	return BLK_MQ_RQ_QUEUE_BUSY;
 }
 
-static int blk_mq_init_hctx(struct blk_mq_hw_ctx *hctx, void *data,
-			    unsigned int index)
-{
-	struct blkfront_info *info = (struct blkfront_info *)data;
-
-	BUG_ON(info->nr_rings <= index);
-	hctx->driver_data = &info->rinfo[index];
-	return 0;
-}
-
 static struct blk_mq_ops blkfront_mq_ops = {
 	.queue_rq = blkif_queue_rq,
 	.map_queue = blk_mq_map_queue,
-	.init_hctx = blk_mq_init_hctx,
 };
 
 static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size,
@@ -950,6 +943,7 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size,
 		return PTR_ERR(rq);
 	}
 
+	rq->queuedata = info;
 	queue_flag_set_unlocked(QUEUE_FLAG_VIRT, rq);
 
 	if (info->feature_discard) {
@@ -2149,6 +2143,8 @@ static int blkfront_resume(struct xenbus_device *dev)
 		return err;
 
 	err = talk_to_blkback(dev, info);
+	if (!err)
+		blk_mq_update_nr_hw_queues(&info->tag_set, info->nr_rings);
 
 	/*
 	 * We have to wait for the backend to switch to
@@ -2485,10 +2481,23 @@ static void blkback_changed(struct xenbus_device *dev,
 		break;
 
 	case XenbusStateConnected:
-		if (dev->state != XenbusStateInitialised) {
+		/*
+		 * talk_to_blkback sets state to XenbusStateInitialised
+		 * and blkfront_connect sets it to XenbusStateConnected
+		 * (if connection went OK).
+		 *
+		 * If the backend (or toolstack) decides to poke at backend
+		 * state (and re-trigger the watch by setting the state repeatedly
+		 * to XenbusStateConnected (4)) we need to deal with this.
+		 * This is allowed as this is used to communicate to the guest
+		 * that the size of disk has changed!
+		 */
+		if ((dev->state != XenbusStateInitialised) &&
+		    (dev->state != XenbusStateConnected)) {
 			if (talk_to_blkback(dev, info))
 				break;
 		}
+
 		blkfront_connect(info);
 		break;
 

drivers/clk/Kconfig

@@ -175,6 +175,7 @@ config COMMON_CLK_KEYSTONE
 config COMMON_CLK_NXP
 	def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
 	select REGMAP_MMIO if ARCH_LPC32XX
+	select MFD_SYSCON if ARCH_LPC18XX
 	---help---
 	  Support for clock providers on NXP platforms.
 

drivers/clk/microchip/clk-pic32mzda.c

@@ -180,15 +180,15 @@ static int pic32mzda_clk_probe(struct platform_device *pdev)
 
 	/* register fixed rate clocks */
 	clks[POSCCLK] = clk_register_fixed_rate(&pdev->dev, "posc_clk", NULL,
-						CLK_IS_ROOT, 24000000);
+						0, 24000000);
 	clks[FRCCLK] =  clk_register_fixed_rate(&pdev->dev, "frc_clk", NULL,
-						CLK_IS_ROOT, 8000000);
+						0, 8000000);
 	clks[BFRCCLK] = clk_register_fixed_rate(&pdev->dev, "bfrc_clk", NULL,
-						CLK_IS_ROOT, 8000000);
+						0, 8000000);
 	clks[LPRCCLK] = clk_register_fixed_rate(&pdev->dev, "lprc_clk", NULL,
-						CLK_IS_ROOT, 32000);
+						0, 32000);
 	clks[UPLLCLK] = clk_register_fixed_rate(&pdev->dev, "usbphy_clk", NULL,
-						CLK_IS_ROOT, 24000000);
+						0, 24000000);
 	/* fixed rate (optional) clock */
 	if (of_find_property(np, "microchip,pic32mzda-sosc", NULL)) {
 		pr_info("pic32-clk: dt requests SOSC.\n");

drivers/cpufreq/intel_pstate.c

@@ -1460,6 +1460,9 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
 
 	intel_pstate_clear_update_util_hook(policy->cpu);
 
+	pr_debug("set_policy cpuinfo.max %u policy->max %u\n",
+		 policy->cpuinfo.max_freq, policy->max);
+
 	cpu = all_cpu_data[0];
 	if (cpu->pstate.max_pstate_physical > cpu->pstate.max_pstate &&
 	    policy->max < policy->cpuinfo.max_freq &&
@@ -1495,13 +1498,13 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
 				   limits->max_sysfs_pct);
 	limits->max_perf_pct = max(limits->min_policy_pct,
 				   limits->max_perf_pct);
-	limits->max_perf = round_up(limits->max_perf, FRAC_BITS);
 
 	/* Make sure min_perf_pct <= max_perf_pct */
 	limits->min_perf_pct = min(limits->max_perf_pct, limits->min_perf_pct);
 
 	limits->min_perf = div_fp(limits->min_perf_pct, 100);
 	limits->max_perf = div_fp(limits->max_perf_pct, 100);
+	limits->max_perf = round_up(limits->max_perf, FRAC_BITS);
 
  out:
 	intel_pstate_set_update_util_hook(policy->cpu);
@@ -1558,8 +1561,11 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy)
 
 	/* cpuinfo and default policy values */
 	policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling;
-	policy->cpuinfo.max_freq =
-		cpu->pstate.turbo_pstate * cpu->pstate.scaling;
+	update_turbo_state();
+	policy->cpuinfo.max_freq = limits->turbo_disabled ?
+			cpu->pstate.max_pstate : cpu->pstate.turbo_pstate;
+	policy->cpuinfo.max_freq *= cpu->pstate.scaling;
+
 	intel_pstate_init_acpi_perf_limits(policy);
 	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 	cpumask_set_cpu(policy->cpu, policy->cpus);

drivers/edac/edac_mc.c

@@ -565,7 +565,8 @@ void edac_mc_reset_delay_period(unsigned long value)
 	list_for_each(item, &mc_devices) {
 		mci = list_entry(item, struct mem_ctl_info, link);
 
-		edac_mod_work(&mci->work, value);
+		if (mci->op_state == OP_RUNNING_POLL)
+			edac_mod_work(&mci->work, value);
 	}
 	mutex_unlock(&mem_ctls_mutex);
 }

drivers/edac/sb_edac.c

@@ -239,8 +239,11 @@ static const u32 rir_offset[MAX_RIR_RANGES][MAX_RIR_WAY] = {
 	{ 0x1a0, 0x1a4, 0x1a8, 0x1ac, 0x1b0, 0x1b4, 0x1b8, 0x1bc },
 };
 
-#define RIR_RNK_TGT(reg)		GET_BITFIELD(reg, 16, 19)
-#define RIR_OFFSET(reg)		GET_BITFIELD(reg,  2, 14)
+#define RIR_RNK_TGT(type, reg) (((type) == BROADWELL) ? \
+	GET_BITFIELD(reg, 20, 23) : GET_BITFIELD(reg, 16, 19))
+
+#define RIR_OFFSET(type, reg) (((type) == HASWELL || (type) == BROADWELL) ? \
+	GET_BITFIELD(reg,  2, 15) : GET_BITFIELD(reg,  2, 14))
 
 /* Device 16, functions 2-7 */
 
@@ -326,6 +329,7 @@ struct pci_id_descr {
 struct pci_id_table {
 	const struct pci_id_descr	*descr;
 	int				n_devs;
+	enum type			type;
 };
 
 struct sbridge_dev {
@@ -394,9 +398,14 @@ static const struct pci_id_descr pci_dev_descr_sbridge[] = {
 	{ PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_BR, 0)		},
 };
 
-#define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) }
+#define PCI_ID_TABLE_ENTRY(A, T) {	\
+	.descr = A,			\
+	.n_devs = ARRAY_SIZE(A),	\
+	.type = T			\
+}
+
 static const struct pci_id_table pci_dev_descr_sbridge_table[] = {
-	PCI_ID_TABLE_ENTRY(pci_dev_descr_sbridge),
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_sbridge, SANDY_BRIDGE),
 	{0,}			/* 0 terminated list. */
 };
 
@@ -463,7 +472,7 @@ static const struct pci_id_descr pci_dev_descr_ibridge[] = {
 };
 
 static const struct pci_id_table pci_dev_descr_ibridge_table[] = {
-	PCI_ID_TABLE_ENTRY(pci_dev_descr_ibridge),
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_ibridge, IVY_BRIDGE),
 	{0,}			/* 0 terminated list. */
 };
 
@@ -536,7 +545,7 @@ static const struct pci_id_descr pci_dev_descr_haswell[] = {
 };
 
 static const struct pci_id_table pci_dev_descr_haswell_table[] = {
-	PCI_ID_TABLE_ENTRY(pci_dev_descr_haswell),
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_haswell, HASWELL),
 	{0,}			/* 0 terminated list. */
 };
 
@@ -580,7 +589,7 @@ static const struct pci_id_descr pci_dev_descr_knl[] = {
 };
 
 static const struct pci_id_table pci_dev_descr_knl_table[] = {
-	PCI_ID_TABLE_ENTRY(pci_dev_descr_knl),
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_knl, KNIGHTS_LANDING),
 	{0,}
 };
 
@@ -648,7 +657,7 @@ static const struct pci_id_descr pci_dev_descr_broadwell[] = {
 };
 
 static const struct pci_id_table pci_dev_descr_broadwell_table[] = {
-	PCI_ID_TABLE_ENTRY(pci_dev_descr_broadwell),
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_broadwell, BROADWELL),
 	{0,}			/* 0 terminated list. */
 };
 
@@ -1894,14 +1903,14 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 				pci_read_config_dword(pvt->pci_tad[i],
 						      rir_offset[j][k],
 						      &reg);
-				tmp_mb = RIR_OFFSET(reg) << 6;
+				tmp_mb = RIR_OFFSET(pvt->info.type, reg) << 6;
 
 				gb = div_u64_rem(tmp_mb, 1024, &mb);
 				edac_dbg(0, "CH#%d RIR#%d INTL#%d, offset %u.%03u GB (0x%016Lx), tgt: %d, reg=0x%08x\n",
 					 i, j, k,
 					 gb, (mb*1000)/1024,
 					 ((u64)tmp_mb) << 20L,
-					 (u32)RIR_RNK_TGT(reg),
+					 (u32)RIR_RNK_TGT(pvt->info.type, reg),
 					 reg);
 			}
 		}
@@ -2234,7 +2243,7 @@ static int get_memory_error_data(struct mem_ctl_info *mci,
 	pci_read_config_dword(pvt->pci_tad[ch_add + base_ch],
 			      rir_offset[n_rir][idx],
 			      &reg);
-	*rank = RIR_RNK_TGT(reg);
+	*rank = RIR_RNK_TGT(pvt->info.type, reg);
 
 	edac_dbg(0, "RIR#%d: channel address 0x%08Lx < 0x%08Lx, RIR interleave %d, index %d\n",
 		 n_rir,
@@ -3357,12 +3366,12 @@ static int sbridge_register_mci(struct sbridge_dev *sbridge_dev, enum type type)
 #define ICPU(model, table) \
 	{ X86_VENDOR_INTEL, 6, model, 0, (unsigned long)&table }
 
-/* Order here must match "enum type" */
 static const struct x86_cpu_id sbridge_cpuids[] = {
 	ICPU(0x2d, pci_dev_descr_sbridge_table),	/* SANDY_BRIDGE */
 	ICPU(0x3e, pci_dev_descr_ibridge_table),	/* IVY_BRIDGE */
 	ICPU(0x3f, pci_dev_descr_haswell_table),	/* HASWELL */
 	ICPU(0x4f, pci_dev_descr_broadwell_table),	/* BROADWELL */
+	ICPU(0x56, pci_dev_descr_broadwell_table),	/* BROADWELL-DE */
 	ICPU(0x57, pci_dev_descr_knl_table),		/* KNIGHTS_LANDING */
 	{ }
 };
@@ -3398,7 +3407,7 @@ static int sbridge_probe(const struct x86_cpu_id *id)
 			 mc, mc + 1, num_mc);
 
 		sbridge_dev->mc = mc++;
-		rc = sbridge_register_mci(sbridge_dev, id - sbridge_cpuids);
+		rc = sbridge_register_mci(sbridge_dev, ptable->type);
 		if (unlikely(rc < 0))
 			goto fail1;
 	}

drivers/firmware/efi/arm-init.c

@@ -174,6 +174,7 @@ static __init void reserve_regions(void)
 {
 	efi_memory_desc_t *md;
 	u64 paddr, npages, size;
+	int resv;
 
 	if (efi_enabled(EFI_DBG))
 		pr_info("Processing EFI memory map:\n");
@@ -190,12 +191,14 @@ static __init void reserve_regions(void)
 		paddr = md->phys_addr;
 		npages = md->num_pages;
 
+		resv = is_reserve_region(md);
 		if (efi_enabled(EFI_DBG)) {
 			char buf[64];
 
-			pr_info("  0x%012llx-0x%012llx %s",
+			pr_info("  0x%012llx-0x%012llx %s%s\n",
 				paddr, paddr + (npages << EFI_PAGE_SHIFT) - 1,
-				efi_md_typeattr_format(buf, sizeof(buf), md));
+				efi_md_typeattr_format(buf, sizeof(buf), md),
+				resv ? "*" : "");
 		}
 
 		memrange_efi_to_native(&paddr, &npages);
@@ -204,14 +207,9 @@ static __init void reserve_regions(void)
 		if (is_normal_ram(md))
 			early_init_dt_add_memory_arch(paddr, size);
 
-		if (is_reserve_region(md)) {
+		if (resv)
 			memblock_mark_nomap(paddr, size);
-			if (efi_enabled(EFI_DBG))
-				pr_cont("*");
-		}
 
-		if (efi_enabled(EFI_DBG))
-			pr_cont("\n");
 	}
 
 	set_bit(EFI_MEMMAP, &efi.flags);

drivers/gpio/Kconfig

@@ -33,6 +33,7 @@ config ARCH_REQUIRE_GPIOLIB
 
 menuconfig GPIOLIB
 	bool "GPIO Support"
+	select ANON_INODES
 	help
 	  This enables GPIO support through the generic GPIO library.
 	  You only need to enable this, if you also want to enable

drivers/gpio/gpio-104-dio-48e.c

@@ -75,7 +75,7 @@ static int dio48e_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
 	const unsigned io_port = offset / 8;
-	const unsigned control_port = io_port / 2;
+	const unsigned int control_port = io_port / 3;
 	const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
 	unsigned long flags;
 	unsigned control;
@@ -115,7 +115,7 @@ static int dio48e_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
 {
 	struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
 	const unsigned io_port = offset / 8;
-	const unsigned control_port = io_port / 2;
+	const unsigned int control_port = io_port / 3;
 	const unsigned mask = BIT(offset % 8);
 	const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
 	const unsigned out_port = (io_port > 2) ? io_port + 1 : io_port;

drivers/gpio/gpio-bcm-kona.c

@@ -547,11 +547,11 @@ static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio)
 	/* disable interrupts and clear status */
 	for (i = 0; i < kona_gpio->num_bank; i++) {
 		/* Unlock the entire bank first */
-		bcm_kona_gpio_write_lock_regs(kona_gpio, i, UNLOCK_CODE);
+		bcm_kona_gpio_write_lock_regs(reg_base, i, UNLOCK_CODE);
 		writel(0xffffffff, reg_base + GPIO_INT_MASK(i));
 		writel(0xffffffff, reg_base + GPIO_INT_STATUS(i));
 		/* Now re-lock the bank */
-		bcm_kona_gpio_write_lock_regs(kona_gpio, i, LOCK_CODE);
+		bcm_kona_gpio_write_lock_regs(reg_base, i, LOCK_CODE);
 	}
 }
 

drivers/gpio/gpio-zynq.c

@@ -709,7 +709,13 @@ static int zynq_gpio_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "input clock not found.\n");
 		return PTR_ERR(gpio->clk);
 	}
+	ret = clk_prepare_enable(gpio->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable clock.\n");
+		return ret;
+	}
 
+	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
 	ret = pm_runtime_get_sync(&pdev->dev);
 	if (ret < 0)
@@ -747,6 +753,7 @@ static int zynq_gpio_probe(struct platform_device *pdev)
 	pm_runtime_put(&pdev->dev);
 err_pm_dis:
 	pm_runtime_disable(&pdev->dev);
+	clk_disable_unprepare(gpio->clk);
 
 	return ret;
 }

drivers/gpio/gpiolib-of.c

@@ -16,6 +16,7 @@
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/io-mapping.h>
 #include <linux/gpio/consumer.h>
 #include <linux/of.h>
 #include <linux/of_address.h>

drivers/gpio/gpiolib.c

@@ -449,7 +449,6 @@ static void gpiodevice_release(struct device *dev)
 {
 	struct gpio_device *gdev = dev_get_drvdata(dev);
 
-	cdev_del(&gdev->chrdev);
 	list_del(&gdev->list);
 	ida_simple_remove(&gpio_ida, gdev->id);
 	kfree(gdev->label);
@@ -482,7 +481,6 @@ static int gpiochip_setup_dev(struct gpio_device *gdev)
 
 	/* From this point, the .release() function cleans up gpio_device */
 	gdev->dev.release = gpiodevice_release;
-	get_device(&gdev->dev);
 	pr_debug("%s: registered GPIOs %d to %d on device: %s (%s)\n",
 		 __func__, gdev->base, gdev->base + gdev->ngpio - 1,
 		 dev_name(&gdev->dev), gdev->chip->label ? : "generic");
@@ -770,6 +768,8 @@ void gpiochip_remove(struct gpio_chip *chip)
 	 * be removed, else it will be dangling until the last user is
 	 * gone.
 	 */
+	cdev_del(&gdev->chrdev);
+	device_del(&gdev->dev);
 	put_device(&gdev->dev);
 }
 EXPORT_SYMBOL_GPL(gpiochip_remove);
@@ -869,7 +869,7 @@ struct gpio_chip *gpiochip_find(void *data,
 
 	spin_lock_irqsave(&gpio_lock, flags);
 	list_for_each_entry(gdev, &gpio_devices, list)
-		if (match(gdev->chip, data))
+		if (gdev->chip && match(gdev->chip, data))
 			break;
 
 	/* No match? */

drivers/gpu/drm/amd/amdgpu/amdgpu.h

@@ -799,6 +799,7 @@ struct amdgpu_ring {
 	unsigned		cond_exe_offs;
 	u64				cond_exe_gpu_addr;
 	volatile u32	*cond_exe_cpu_addr;
+	int                     vmid;
 };
 
 /*
@@ -936,7 +937,8 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring,
 		    unsigned vm_id, uint64_t pd_addr,
 		    uint32_t gds_base, uint32_t gds_size,
 		    uint32_t gws_base, uint32_t gws_size,
-		    uint32_t oa_base, uint32_t oa_size);
+		    uint32_t oa_base, uint32_t oa_size,
+		    bool vmid_switch);
 void amdgpu_vm_reset_id(struct amdgpu_device *adev, unsigned vm_id);
 uint64_t amdgpu_vm_map_gart(const dma_addr_t *pages_addr, uint64_t addr);
 int amdgpu_vm_update_page_directory(struct amdgpu_device *adev,

drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c

@@ -696,6 +696,17 @@ static uint32_t fw_type_convert(struct cgs_device *cgs_device, uint32_t fw_type)
 	return result;
 }
 
+static int amdgpu_cgs_rel_firmware(struct cgs_device *cgs_device, enum cgs_ucode_id type)
+{
+	CGS_FUNC_ADEV;
+	if ((CGS_UCODE_ID_SMU == type) || (CGS_UCODE_ID_SMU_SK == type)) {
+		release_firmware(adev->pm.fw);
+		return 0;
+	}
+	/* cannot release other firmware because they are not created by cgs */
+	return -EINVAL;
+}
+
 static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device,
 					enum cgs_ucode_id type,
 					struct cgs_firmware_info *info)
@@ -1125,6 +1136,7 @@ static const struct cgs_ops amdgpu_cgs_ops = {
 	amdgpu_cgs_pm_query_clock_limits,
 	amdgpu_cgs_set_camera_voltages,
 	amdgpu_cgs_get_firmware_info,
+	amdgpu_cgs_rel_firmware,
 	amdgpu_cgs_set_powergating_state,
 	amdgpu_cgs_set_clockgating_state,
 	amdgpu_cgs_get_active_displays_info,

drivers/gpu/drm/amd/amdgpu/amdgpu_device.c

@@ -827,8 +827,10 @@ static uint32_t cail_ioreg_read(struct card_info *info, uint32_t reg)
  */
 static void amdgpu_atombios_fini(struct amdgpu_device *adev)
 {
-	if (adev->mode_info.atom_context)
+	if (adev->mode_info.atom_context) {
 		kfree(adev->mode_info.atom_context->scratch);
+		kfree(adev->mode_info.atom_context->iio);
+	}
 	kfree(adev->mode_info.atom_context);
 	adev->mode_info.atom_context = NULL;
 	kfree(adev->mode_info.atom_card_info);
@@ -1325,6 +1327,11 @@ static int amdgpu_fini(struct amdgpu_device *adev)
 		adev->ip_block_status[i].valid = false;
 	}
 
+	for (i = adev->num_ip_blocks - 1; i >= 0; i--) {
+		if (adev->ip_blocks[i].funcs->late_fini)
+			adev->ip_blocks[i].funcs->late_fini((void *)adev);
+	}
+
 	return 0;
 }
 
@@ -1513,8 +1520,7 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 		amdgpu_atombios_has_gpu_virtualization_table(adev);
 
 	/* Post card if necessary */
-	if (!amdgpu_card_posted(adev) ||
-	    adev->virtualization.supports_sr_iov) {
+	if (!amdgpu_card_posted(adev)) {
 		if (!adev->bios) {
 			dev_err(adev->dev, "Card not posted and no BIOS - ignoring\n");
 			return -EINVAL;

drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c

@@ -122,6 +122,7 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 	bool skip_preamble, need_ctx_switch;
 	unsigned patch_offset = ~0;
 	struct amdgpu_vm *vm;
+	int vmid = 0, old_vmid = ring->vmid;
 	struct fence *hwf;
 	uint64_t ctx;
 
@@ -135,9 +136,11 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 	if (job) {
 		vm = job->vm;
 		ctx = job->ctx;
+		vmid = job->vm_id;
 	} else {
 		vm = NULL;
 		ctx = 0;
+		vmid = 0;
 	}
 
 	if (!ring->ready) {
@@ -163,7 +166,8 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 		r = amdgpu_vm_flush(ring, job->vm_id, job->vm_pd_addr,
 				    job->gds_base, job->gds_size,
 				    job->gws_base, job->gws_size,
-				    job->oa_base, job->oa_size);
+				    job->oa_base, job->oa_size,
+				    (ring->current_ctx == ctx) && (old_vmid != vmid));
 		if (r) {
 			amdgpu_ring_undo(ring);
 			return r;
@@ -180,7 +184,6 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 	need_ctx_switch = ring->current_ctx != ctx;
 	for (i = 0; i < num_ibs; ++i) {
 		ib = &ibs[i];
-
 		/* drop preamble IBs if we don't have a context switch */
 		if ((ib->flags & AMDGPU_IB_FLAG_PREAMBLE) && skip_preamble)
 			continue;
@@ -188,6 +191,7 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 		amdgpu_ring_emit_ib(ring, ib, job ? job->vm_id : 0,
 				    need_ctx_switch);
 		need_ctx_switch = false;
+		ring->vmid = vmid;
 	}
 
 	if (ring->funcs->emit_hdp_invalidate)
@@ -198,6 +202,7 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 		dev_err(adev->dev, "failed to emit fence (%d)\n", r);
 		if (job && job->vm_id)
 			amdgpu_vm_reset_id(adev, job->vm_id);
+		ring->vmid = old_vmid;
 		amdgpu_ring_undo(ring);
 		return r;
 	}

drivers/gpu/drm/amd/amdgpu/amdgpu_powerplay.c

@@ -183,13 +183,6 @@ static int amdgpu_pp_sw_fini(void *handle)
 	if (ret)
 		return ret;
 
-#ifdef CONFIG_DRM_AMD_POWERPLAY
-	if (adev->pp_enabled) {
-		amdgpu_pm_sysfs_fini(adev);
-		amd_powerplay_fini(adev->powerplay.pp_handle);
-	}
-#endif
-
 	return ret;
 }
 
@@ -223,6 +216,22 @@ static int amdgpu_pp_hw_fini(void *handle)
 	return ret;
 }
 
+static void amdgpu_pp_late_fini(void *handle)
+{
+#ifdef CONFIG_DRM_AMD_POWERPLAY
+	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+
+	if (adev->pp_enabled) {
+		amdgpu_pm_sysfs_fini(adev);
+		amd_powerplay_fini(adev->powerplay.pp_handle);
+	}
+
+	if (adev->powerplay.ip_funcs->late_fini)
+		adev->powerplay.ip_funcs->late_fini(
+			  adev->powerplay.pp_handle);
+#endif
+}
+
 static int amdgpu_pp_suspend(void *handle)
 {
 	int ret = 0;
@@ -311,6 +320,7 @@ const struct amd_ip_funcs amdgpu_pp_ip_funcs = {
 	.sw_fini = amdgpu_pp_sw_fini,
 	.hw_init = amdgpu_pp_hw_init,
 	.hw_fini = amdgpu_pp_hw_fini,
+	.late_fini = amdgpu_pp_late_fini,
 	.suspend = amdgpu_pp_suspend,
 	.resume = amdgpu_pp_resume,
 	.is_idle = amdgpu_pp_is_idle,

drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c

@@ -343,6 +343,7 @@ void amdgpu_ring_fini(struct amdgpu_ring *ring)
 	ring->ring = NULL;
 	ring->ring_obj = NULL;
 
+	amdgpu_wb_free(ring->adev, ring->cond_exe_offs);
 	amdgpu_wb_free(ring->adev, ring->fence_offs);
 	amdgpu_wb_free(ring->adev, ring->rptr_offs);
 	amdgpu_wb_free(ring->adev, ring->wptr_offs);

drivers/gpu/drm/amd/amdgpu/amdgpu_sa.c

@@ -115,6 +115,7 @@ int amdgpu_sa_bo_manager_start(struct amdgpu_device *adev,
 		return r;
 	}
 	r = amdgpu_bo_kmap(sa_manager->bo, &sa_manager->cpu_ptr);
+	memset(sa_manager->cpu_ptr, 0, sa_manager->size);
 	amdgpu_bo_unreserve(sa_manager->bo);
 	return r;
 }

drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c

@@ -253,19 +253,20 @@ int amdgpu_uvd_sw_fini(struct amdgpu_device *adev)
 {
 	int r;
 
-	if (adev->uvd.vcpu_bo == NULL)
-		return 0;
+	kfree(adev->uvd.saved_bo);
 
 	amd_sched_entity_fini(&adev->uvd.ring.sched, &adev->uvd.entity);
 
-	r = amdgpu_bo_reserve(adev->uvd.vcpu_bo, false);
-	if (!r) {
-		amdgpu_bo_kunmap(adev->uvd.vcpu_bo);
-		amdgpu_bo_unpin(adev->uvd.vcpu_bo);
-		amdgpu_bo_unreserve(adev->uvd.vcpu_bo);
-	}
+	if (adev->uvd.vcpu_bo) {
+		r = amdgpu_bo_reserve(adev->uvd.vcpu_bo, false);
+		if (!r) {
+			amdgpu_bo_kunmap(adev->uvd.vcpu_bo);
+			amdgpu_bo_unpin(adev->uvd.vcpu_bo);
+			amdgpu_bo_unreserve(adev->uvd.vcpu_bo);
+		}
 
-	amdgpu_bo_unref(&adev->uvd.vcpu_bo);
+		amdgpu_bo_unref(&adev->uvd.vcpu_bo);
+	}
 
 	amdgpu_ring_fini(&adev->uvd.ring);
 

drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c

@@ -298,7 +298,8 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring,
 		    unsigned vm_id, uint64_t pd_addr,
 		    uint32_t gds_base, uint32_t gds_size,
 		    uint32_t gws_base, uint32_t gws_size,
-		    uint32_t oa_base, uint32_t oa_size)
+		    uint32_t oa_base, uint32_t oa_size,
+		    bool vmid_switch)
 {
 	struct amdgpu_device *adev = ring->adev;
 	struct amdgpu_vm_id *id = &adev->vm_manager.ids[vm_id];
@@ -312,8 +313,7 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring,
 	int r;
 
 	if (ring->funcs->emit_pipeline_sync && (
-	    pd_addr != AMDGPU_VM_NO_FLUSH || gds_switch_needed ||
-		    ring->type == AMDGPU_RING_TYPE_COMPUTE))
+	    pd_addr != AMDGPU_VM_NO_FLUSH || gds_switch_needed || vmid_switch))
 		amdgpu_ring_emit_pipeline_sync(ring);
 
 	if (ring->funcs->emit_vm_flush &&

drivers/gpu/drm/amd/amdgpu/ci_dpm.c

@@ -6221,6 +6221,9 @@ static int ci_dpm_sw_fini(void *handle)
 	ci_dpm_fini(adev);
 	mutex_unlock(&adev->pm.mutex);
 
+	release_firmware(adev->pm.fw);
+	adev->pm.fw = NULL;
+
 	return 0;
 }
 

drivers/gpu/drm/amd/amdgpu/cik_sdma.c

@@ -66,6 +66,16 @@ MODULE_FIRMWARE("radeon/mullins_sdma1.bin");
 
 u32 amdgpu_cik_gpu_check_soft_reset(struct amdgpu_device *adev);
 
+
+static void cik_sdma_free_microcode(struct amdgpu_device *adev)
+{
+	int i;
+	for (i = 0; i < adev->sdma.num_instances; i++) {
+			release_firmware(adev->sdma.instance[i].fw);
+			adev->sdma.instance[i].fw = NULL;
+	}
+}
+
 /*
  * sDMA - System DMA
  * Starting with CIK, the GPU has new asynchronous
@@ -419,6 +429,8 @@ static int cik_sdma_gfx_resume(struct amdgpu_device *adev)
 		/* Initialize the ring buffer's read and write pointers */
 		WREG32(mmSDMA0_GFX_RB_RPTR + sdma_offsets[i], 0);
 		WREG32(mmSDMA0_GFX_RB_WPTR + sdma_offsets[i], 0);
+		WREG32(mmSDMA0_GFX_IB_RPTR + sdma_offsets[i], 0);
+		WREG32(mmSDMA0_GFX_IB_OFFSET + sdma_offsets[i], 0);
 
 		/* set the wb address whether it's enabled or not */
 		WREG32(mmSDMA0_GFX_RB_RPTR_ADDR_HI + sdma_offsets[i],
@@ -446,7 +458,12 @@ static int cik_sdma_gfx_resume(struct amdgpu_device *adev)
 		WREG32(mmSDMA0_GFX_IB_CNTL + sdma_offsets[i], ib_cntl);
 
 		ring->ready = true;
+	}
+
+	cik_sdma_enable(adev, true);
 
+	for (i = 0; i < adev->sdma.num_instances; i++) {
+		ring = &adev->sdma.instance[i].ring;
 		r = amdgpu_ring_test_ring(ring);
 		if (r) {
 			ring->ready = false;
@@ -529,8 +546,8 @@ static int cik_sdma_start(struct amdgpu_device *adev)
 	if (r)
 		return r;
 
-	/* unhalt the MEs */
-	cik_sdma_enable(adev, true);
+	/* halt the engine before programing */
+	cik_sdma_enable(adev, false);
 
 	/* start the gfx rings and rlc compute queues */
 	r = cik_sdma_gfx_resume(adev);
@@ -998,6 +1015,7 @@ static int cik_sdma_sw_fini(void *handle)
 	for (i = 0; i < adev->sdma.num_instances; i++)
 		amdgpu_ring_fini(&adev->sdma.instance[i].ring);
 
+	cik_sdma_free_microcode(adev);
 	return 0;
 }
 

drivers/gpu/drm/amd/amdgpu/fiji_dpm.c

@@ -72,6 +72,11 @@ static int fiji_dpm_sw_init(void *handle)
 
 static int fiji_dpm_sw_fini(void *handle)
 {
+	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+
+	release_firmware(adev->pm.fw);
+	adev->pm.fw = NULL;
+
 	return 0;
 }
 

drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c

@@ -991,6 +991,22 @@ static int gfx_v7_0_init_microcode(struct amdgpu_device *adev)
 	return err;
 }
 
+static void gfx_v7_0_free_microcode(struct amdgpu_device *adev)
+{
+	release_firmware(adev->gfx.pfp_fw);
+	adev->gfx.pfp_fw = NULL;
+	release_firmware(adev->gfx.me_fw);
+	adev->gfx.me_fw = NULL;
+	release_firmware(adev->gfx.ce_fw);
+	adev->gfx.ce_fw = NULL;
+	release_firmware(adev->gfx.mec_fw);
+	adev->gfx.mec_fw = NULL;
+	release_firmware(adev->gfx.mec2_fw);
+	adev->gfx.mec2_fw = NULL;
+	release_firmware(adev->gfx.rlc_fw);
+	adev->gfx.rlc_fw = NULL;
+}
+
 /**
  * gfx_v7_0_tiling_mode_table_init - init the hw tiling table
  *
@@ -4489,6 +4505,7 @@ static int gfx_v7_0_sw_fini(void *handle)
 	gfx_v7_0_cp_compute_fini(adev);
 	gfx_v7_0_rlc_fini(adev);
 	gfx_v7_0_mec_fini(adev);
+	gfx_v7_0_free_microcode(adev);
 
 	return 0;
 }

drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c

@@ -836,6 +836,26 @@ static int gfx_v8_0_ring_test_ib(struct amdgpu_ring *ring)
 	return r;
 }
 
+
+static void gfx_v8_0_free_microcode(struct amdgpu_device *adev) {
+	release_firmware(adev->gfx.pfp_fw);
+	adev->gfx.pfp_fw = NULL;
+	release_firmware(adev->gfx.me_fw);
+	adev->gfx.me_fw = NULL;
+	release_firmware(adev->gfx.ce_fw);
+	adev->gfx.ce_fw = NULL;
+	release_firmware(adev->gfx.rlc_fw);
+	adev->gfx.rlc_fw = NULL;
+	release_firmware(adev->gfx.mec_fw);
+	adev->gfx.mec_fw = NULL;
+	if ((adev->asic_type != CHIP_STONEY) &&
+	    (adev->asic_type != CHIP_TOPAZ))
+		release_firmware(adev->gfx.mec2_fw);
+	adev->gfx.mec2_fw = NULL;
+
+	kfree(adev->gfx.rlc.register_list_format);
+}
+
 static int gfx_v8_0_init_microcode(struct amdgpu_device *adev)
 {
 	const char *chip_name;
@@ -1983,7 +2003,7 @@ static int gfx_v8_0_sw_fini(void *handle)
 
 	gfx_v8_0_rlc_fini(adev);
 
-	kfree(adev->gfx.rlc.register_list_format);
+	gfx_v8_0_free_microcode(adev);
 
 	return 0;
 }
@@ -3974,11 +3994,15 @@ static int gfx_v8_0_cp_gfx_start(struct amdgpu_device *adev)
 		amdgpu_ring_write(ring, 0x3a00161a);
 		amdgpu_ring_write(ring, 0x0000002e);
 		break;
-	case CHIP_TOPAZ:
 	case CHIP_CARRIZO:
 		amdgpu_ring_write(ring, 0x00000002);
 		amdgpu_ring_write(ring, 0x00000000);
 		break;
+	case CHIP_TOPAZ:
+		amdgpu_ring_write(ring, adev->gfx.config.num_rbs == 1 ?
+				0x00000000 : 0x00000002);
+		amdgpu_ring_write(ring, 0x00000000);
+		break;
 	case CHIP_STONEY:
 		amdgpu_ring_write(ring, 0x00000000);
 		amdgpu_ring_write(ring, 0x00000000);

drivers/gpu/drm/amd/amdgpu/iceland_dpm.c

@@ -72,6 +72,11 @@ static int iceland_dpm_sw_init(void *handle)
 
 static int iceland_dpm_sw_fini(void *handle)
 {
+	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+
+	release_firmware(adev->pm.fw);
+	adev->pm.fw = NULL;
+
 	return 0;
 }
 

drivers/gpu/drm/amd/amdgpu/sdma_v2_4.c

@@ -105,6 +105,15 @@ static void sdma_v2_4_init_golden_registers(struct amdgpu_device *adev)
 	}
 }
 
+static void sdma_v2_4_free_microcode(struct amdgpu_device *adev)
+{
+	int i;
+	for (i = 0; i < adev->sdma.num_instances; i++) {
+		release_firmware(adev->sdma.instance[i].fw);
+		adev->sdma.instance[i].fw = NULL;
+	}
+}
+
 /**
  * sdma_v2_4_init_microcode - load ucode images from disk
  *
@@ -461,6 +470,8 @@ static int sdma_v2_4_gfx_resume(struct amdgpu_device *adev)
 		/* Initialize the ring buffer's read and write pointers */
 		WREG32(mmSDMA0_GFX_RB_RPTR + sdma_offsets[i], 0);
 		WREG32(mmSDMA0_GFX_RB_WPTR + sdma_offsets[i], 0);
+		WREG32(mmSDMA0_GFX_IB_RPTR + sdma_offsets[i], 0);
+		WREG32(mmSDMA0_GFX_IB_OFFSET + sdma_offsets[i], 0);
 
 		/* set the wb address whether it's enabled or not */
 		WREG32(mmSDMA0_GFX_RB_RPTR_ADDR_HI + sdma_offsets[i],
@@ -489,7 +500,11 @@ static int sdma_v2_4_gfx_resume(struct amdgpu_device *adev)
 		WREG32(mmSDMA0_GFX_IB_CNTL + sdma_offsets[i], ib_cntl);
 
 		ring->ready = true;
+	}
 
+	sdma_v2_4_enable(adev, true);
+	for (i = 0; i < adev->sdma.num_instances; i++) {
+		ring = &adev->sdma.instance[i].ring;
 		r = amdgpu_ring_test_ring(ring);
 		if (r) {
 			ring->ready = false;
@@ -580,8 +595,8 @@ static int sdma_v2_4_start(struct amdgpu_device *adev)
 			return -EINVAL;
 	}
 
-	/* unhalt the MEs */
-	sdma_v2_4_enable(adev, true);
+	/* halt the engine before programing */
+	sdma_v2_4_enable(adev, false);
 
 	/* start the gfx rings and rlc compute queues */
 	r = sdma_v2_4_gfx_resume(adev);
@@ -1012,6 +1027,7 @@ static int sdma_v2_4_sw_fini(void *handle)
 	for (i = 0; i < adev->sdma.num_instances; i++)
 		amdgpu_ring_fini(&adev->sdma.instance[i].ring);
 
+	sdma_v2_4_free_microcode(adev);
 	return 0;
 }
 

drivers/gpu/drm/amd/amdgpu/sdma_v3_0.c

@@ -236,6 +236,15 @@ static void sdma_v3_0_init_golden_registers(struct amdgpu_device *adev)
 	}
 }
 
+static void sdma_v3_0_free_microcode(struct amdgpu_device *adev)
+{
+	int i;
+	for (i = 0; i < adev->sdma.num_instances; i++) {
+		release_firmware(adev->sdma.instance[i].fw);
+		adev->sdma.instance[i].fw = NULL;
+	}
+}
+
 /**
  * sdma_v3_0_init_microcode - load ucode images from disk
  *
@@ -672,6 +681,8 @@ static int sdma_v3_0_gfx_resume(struct amdgpu_device *adev)
 		/* Initialize the ring buffer's read and write pointers */
 		WREG32(mmSDMA0_GFX_RB_RPTR + sdma_offsets[i], 0);
 		WREG32(mmSDMA0_GFX_RB_WPTR + sdma_offsets[i], 0);
+		WREG32(mmSDMA0_GFX_IB_RPTR + sdma_offsets[i], 0);
+		WREG32(mmSDMA0_GFX_IB_OFFSET + sdma_offsets[i], 0);
 
 		/* set the wb address whether it's enabled or not */
 		WREG32(mmSDMA0_GFX_RB_RPTR_ADDR_HI + sdma_offsets[i],
@@ -711,7 +722,15 @@ static int sdma_v3_0_gfx_resume(struct amdgpu_device *adev)
 		WREG32(mmSDMA0_GFX_IB_CNTL + sdma_offsets[i], ib_cntl);
 
 		ring->ready = true;
+	}
+
+	/* unhalt the MEs */
+	sdma_v3_0_enable(adev, true);
+	/* enable sdma ring preemption */
+	sdma_v3_0_ctx_switch_enable(adev, true);
 
+	for (i = 0; i < adev->sdma.num_instances; i++) {
+		ring = &adev->sdma.instance[i].ring;
 		r = amdgpu_ring_test_ring(ring);
 		if (r) {
 			ring->ready = false;
@@ -804,10 +823,9 @@ static int sdma_v3_0_start(struct amdgpu_device *adev)
 		}
 	}
 
-	/* unhalt the MEs */
-	sdma_v3_0_enable(adev, true);
-	/* enable sdma ring preemption */
-	sdma_v3_0_ctx_switch_enable(adev, true);
+	/* disble sdma engine before programing it */
+	sdma_v3_0_ctx_switch_enable(adev, false);
+	sdma_v3_0_enable(adev, false);
 
 	/* start the gfx rings and rlc compute queues */
 	r = sdma_v3_0_gfx_resume(adev);
@@ -1247,6 +1265,7 @@ static int sdma_v3_0_sw_fini(void *handle)
 	for (i = 0; i < adev->sdma.num_instances; i++)
 		amdgpu_ring_fini(&adev->sdma.instance[i].ring);
 
+	sdma_v3_0_free_microcode(adev);
 	return 0;
 }
 

drivers/gpu/drm/amd/amdgpu/tonga_dpm.c

@@ -71,6 +71,11 @@ static int tonga_dpm_sw_init(void *handle)
 
 static int tonga_dpm_sw_fini(void *handle)
 {
+	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+
+	release_firmware(adev->pm.fw);
+	adev->pm.fw = NULL;
+
 	return 0;
 }