net: stmmac: prepare irq_status for mtl

This patch prepares mac irq status treatment for multiple queues.
Signed-off-by: NJoao Pinto <jpinto@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/common.h

@@ -472,6 +472,8 @@ struct stmmac_ops {
 	/* Handle extra events on specific interrupts hw dependent */
 	int (*host_irq_status)(struct mac_device_info *hw,
 			       struct stmmac_extra_stats *x);
+	/* Handle MTL interrupts */
+	int (*host_mtl_irq_status)(struct mac_device_info *hw, u32 chan);
 	/* Multicast filter setting */
 	void (*set_filter)(struct mac_device_info *hw, struct net_device *dev);
 	/* Flow control setting */

drivers/net/ethernet/stmicro/stmmac/dwmac4.h

@@ -175,7 +175,7 @@ enum power_event {
 #define MTL_OPERATION_RAA_WSP		(0x1 << 2)
 
 #define MTL_INT_STATUS			0x00000c20
-#define MTL_INT_Q0			BIT(0)
+#define MTL_INT_QX(x)			BIT(x)
 
 #define MTL_RXQ_DMA_MAP0		0x00000c30 /* queue 0 to 3 */
 #define MTL_RXQ_DMA_MAP1		0x00000c34 /* queue 4 to 7 */

drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c

@@ -416,11 +416,34 @@ static void dwmac4_phystatus(void __iomem *ioaddr, struct stmmac_extra_stats *x)
 	}
 }
 
+static int dwmac4_irq_mtl_status(struct mac_device_info *hw, u32 chan)
+{
+	void __iomem *ioaddr = hw->pcsr;
+	u32 mtl_int_qx_status;
+	int ret = 0;
+
+	mtl_int_qx_status = readl(ioaddr + MTL_INT_STATUS);
+
+	/* Check MTL Interrupt */
+	if (mtl_int_qx_status & MTL_INT_QX(chan)) {
+		/* read Queue x Interrupt status */
+		u32 status = readl(ioaddr + MTL_CHAN_INT_CTRL(chan));
+
+		if (status & MTL_RX_OVERFLOW_INT) {
+			/*  clear Interrupt */
+			writel(status | MTL_RX_OVERFLOW_INT,
+			       ioaddr + MTL_CHAN_INT_CTRL(chan));
+			ret = CORE_IRQ_MTL_RX_OVERFLOW;
+		}
+	}
+
+	return ret;
+}
+
 static int dwmac4_irq_status(struct mac_device_info *hw,
 			     struct stmmac_extra_stats *x)
 {
 	void __iomem *ioaddr = hw->pcsr;
-	u32 mtl_int_qx_status;
 	u32 intr_status;
 	int ret = 0;
 
@@ -439,20 +462,6 @@ static int dwmac4_irq_status(struct mac_device_info *hw,
 		x->irq_receive_pmt_irq_n++;
 	}
 
-	mtl_int_qx_status = readl(ioaddr + MTL_INT_STATUS);
-	/* Check MTL Interrupt: Currently only one queue is used: Q0. */
-	if (mtl_int_qx_status & MTL_INT_Q0) {
-		/* read Queue 0 Interrupt status */
-		u32 status = readl(ioaddr + MTL_CHAN_INT_CTRL(STMMAC_CHAN0));
-
-		if (status & MTL_RX_OVERFLOW_INT) {
-			/*  clear Interrupt */
-			writel(status | MTL_RX_OVERFLOW_INT,
-			       ioaddr + MTL_CHAN_INT_CTRL(STMMAC_CHAN0));
-			ret = CORE_IRQ_MTL_RX_OVERFLOW;
-		}
-	}
-
 	dwmac_pcs_isr(ioaddr, GMAC_PCS_BASE, intr_status, x);
 	if (intr_status & PCS_RGSMIIIS_IRQ)
 		dwmac4_phystatus(ioaddr, x);
@@ -554,6 +563,7 @@ static const struct stmmac_ops dwmac4_ops = {
 	.map_mtl_to_dma = dwmac4_map_mtl_dma,
 	.dump_regs = dwmac4_dump_regs,
 	.host_irq_status = dwmac4_irq_status,
+	.host_mtl_irq_status = dwmac4_irq_mtl_status,
 	.flow_ctrl = dwmac4_flow_ctrl,
 	.pmt = dwmac4_pmt,
 	.set_umac_addr = dwmac4_set_umac_addr,

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -2901,6 +2901,11 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
 	if ((priv->plat->has_gmac) || (priv->plat->has_gmac4)) {
 		int status = priv->hw->mac->host_irq_status(priv->hw,
 							    &priv->xstats);
+
+		if (priv->synopsys_id >= DWMAC_CORE_4_00)
+			status |= priv->hw->mac->host_mtl_irq_status(priv->hw,
+								STMMAC_CHAN0);
+
 		if (unlikely(status)) {
 			/* For LPI we need to save the tx status */
 			if (status & CORE_IRQ_TX_PATH_IN_LPI_MODE)