Merge tag 'arc-v3.11-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull second set of ARC architecture updates from Vineet Gupta:
 "Couple of Platform updates (Device Tree files primarily) given that
  the corresponding drivers (net/ethernet/arc/*, irqctl/irq-tb10x.c)
  have now been merged into your tree.

  Ideally these shd have been part of same submissions, oh well..."

* tag 'arc-v3.11-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [TB10x] Updates for irqchip driver
  ARC: [plat-arcfpga] Enable arc_emac for ARCAngle4 Board

arch/arc/boot/dts/abilis_tb100.dtsi

@@ -21,10 +21,6 @@
 
 /include/ "abilis_tb10x.dtsi"
 
-/* interrupt specifiers
- * --------------------
- * 0: rising, 1: low, 2: high, 3: falling,
- */
 
 / {
 	clock-frequency		= <500000000>;	/* 500 MHZ */
@@ -173,7 +169,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF140000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -185,7 +181,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF141000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -197,7 +193,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF142000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -209,7 +205,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF143000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -221,7 +217,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF144000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -233,7 +229,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF145000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -245,7 +241,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF146000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -257,7 +253,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF147000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -269,7 +265,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF148000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -281,7 +277,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF149000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -293,7 +289,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF14A000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -305,7 +301,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF14B000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -317,7 +313,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF14C000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -329,7 +325,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF14D000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;

arch/arc/boot/dts/abilis_tb101.dtsi

@@ -21,10 +21,6 @@
 
 /include/ "abilis_tb10x.dtsi"
 
-/* interrupt specifiers
- * --------------------
- * 0: rising, 1: low, 2: high, 3: falling,
- */
 
 / {
 	clock-frequency		= <500000000>;	/* 500 MHZ */
@@ -182,7 +178,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF140000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -194,7 +190,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF141000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -206,7 +202,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF142000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -218,7 +214,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF143000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -230,7 +226,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF144000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -242,7 +238,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF145000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -254,7 +250,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF146000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -266,7 +262,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF147000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -278,7 +274,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF148000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -290,7 +286,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF149000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -302,7 +298,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF14A000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -314,7 +310,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF14B000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -326,7 +322,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF14C000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;
@@ -338,7 +334,7 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <27 1>;
+			interrupts = <27 2>;
 			reg = <0xFF14D000 0x1000>;
 			gpio-controller;
 			#gpio-cells = <1>;

arch/arc/boot/dts/abilis_tb10x.dtsi

@@ -19,10 +19,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
-/* interrupt specifiers
- * --------------------
- * 0: rising, 1: low, 2: high, 3: falling,
- */
 
 / {
 	compatible		= "abilis,arc-tb10x";
@@ -78,7 +74,7 @@
 			#interrupt-cells = <1>;
 		};
 		tb10x_ictl: pic@fe002000 {
-			compatible = "abilis,tb10x_ictl";
+			compatible = "abilis,tb10x-ictl";
 			reg = <0xFE002000 0x20>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -91,7 +87,7 @@
 			compatible = "snps,dw-apb-uart";
 			reg = <0xFF100000 0x100>;
 			clock-frequency = <166666666>;
-			interrupts = <25 1>;
+			interrupts = <25 8>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			interrupt-parent = <&tb10x_ictl>;
@@ -100,7 +96,7 @@
 			compatible = "snps,dwmac-3.70a","snps,dwmac";
 			reg = <0xFE100000 0x1058>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <6 1>;
+			interrupts = <6 8>;
 			interrupt-names = "macirq";
 			clocks = <&ahb_clk>;
 			clock-names = "stmmaceth";
@@ -109,7 +105,7 @@
 			compatible = "snps,dma-spear1340";
 			reg = <0xFE000000 0x400>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <14 1>;
+			interrupts = <14 8>;
 			dma-channels = <6>;
 			dma-requests = <0>;
 			dma-masters = <1>;
@@ -128,7 +124,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0xFF120000 0x1000>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <12 1>;
+			interrupts = <12 8>;
 			clocks = <&ahb_clk>;
 		};
 		i2c1: i2c@FF121000 {
@@ -137,7 +133,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0xFF121000 0x1000>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <12 1>;
+			interrupts = <12 8>;
 			clocks = <&ahb_clk>;
 		};
 		i2c2: i2c@FF122000 {
@@ -146,7 +142,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0xFF122000 0x1000>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <12 1>;
+			interrupts = <12 8>;
 			clocks = <&ahb_clk>;
 		};
 		i2c3: i2c@FF123000 {
@@ -155,7 +151,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0xFF123000 0x1000>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <12 1>;
+			interrupts = <12 8>;
 			clocks = <&ahb_clk>;
 		};
 		i2c4: i2c@FF124000 {
@@ -164,7 +160,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0xFF124000 0x1000>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <12 1>;
+			interrupts = <12 8>;
 			clocks = <&ahb_clk>;
 		};
 
@@ -176,7 +172,7 @@
 			num-cs = <1>;
 			reg = <0xFE010000 0x20>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <26 1>;
+			interrupts = <26 8>;
 			clocks = <&ahb_clk>;
 		};
 		spi1: spi@0xFE011000 {
@@ -187,7 +183,7 @@
 			num-cs = <2>;
 			reg = <0xFE011000 0x20>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <10 1>;
+			interrupts = <10 8>;
 			clocks = <&ahb_clk>;
 		};
 
@@ -195,7 +191,7 @@
 			compatible = "abilis,tb100-tsm";
 			reg = <0xff316000 0x400>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <17 1>;
+			interrupts = <17 8>;
 			output-clkdiv = <4>;
 			global-packet-delay = <0x21>;
 			port-packet-delay = <0>;
@@ -213,7 +209,7 @@
 					"cpuctrl",
 					"a6it_int_force";
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <20 1>, <19 1>;
+			interrupts = <20 2>, <19 2>;
 			interrupt-names = "cmd_irq", "event_irq";
 		};
 		tb10x_mdsc0: tb10x-mdscr@FF300000 {
@@ -239,7 +235,7 @@
 			compatible = "abilis,tb100-wfb";
 			reg = <0xff319000 0x1000>;
 			interrupt-parent = <&tb10x_ictl>;
-			interrupts = <16 1>;
+			interrupts = <16 8>;
 		};
 	};
 };

arch/arc/boot/dts/angel4.dts

@@ -51,5 +51,21 @@
 			current-speed = <115200>;
 			status = "okay";
 		};
+
+		ethernet@c0fc2000 {
+			compatible = "snps,arc-emac";
+			reg = <0xc0fc2000 0x3c>;
+			interrupts = <6>;
+			mac-address = [ 00 11 22 33 44 55 ];
+			clock-frequency = <80000000>;
+			max-speed = <100>;
+			phy = <&phy0>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy0: ethernet-phy@0 {
+				reg = <1>;
+			};
+		};
 	};
 };

arch/arc/configs/fpga_defconfig

@@ -38,6 +38,9 @@ CONFIG_INET=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 # CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+CONFIG_ARC_EMAC=y
+CONFIG_LXT_PHY=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set

arch/arc/plat-arcfpga/include/plat/irq.h

@@ -16,8 +16,6 @@
 #define UART1_IRQ	10
 #define UART2_IRQ	11
 
-#define VMAC_IRQ	6
-
 #define IDE_IRQ		13
 #define PCI_IRQ		14
 #define PS2_IRQ		15

arch/arc/plat-arcfpga/include/plat/memmap.h

@@ -15,8 +15,6 @@
 #define UART0_BASE              0xC0FC1000
 #define UART1_BASE              0xC0FC1100
 
-#define VMAC_REG_BASEADDR       0xC0FC2000
-
 #define IDE_CONTROLLER_BASE     0xC0FC9000
 
 #define AHB_PCI_HOST_BRG_BASE   0xC0FD0000

arch/arc/plat-tb10x/Kconfig

@@ -22,6 +22,7 @@ menuconfig ARC_PLAT_TB10X
 	select PINCTRL
 	select PINMUX
 	select ARCH_REQUIRE_GPIOLIB
+	select TB10X_IRQC
 	help
 	  Support for platforms based on the TB10x home media gateway SOC by
 	  Abilis Systems. TB10x is based on the ARC700 CPU architecture.