USB: rename usb_configure_device

This patch (as1314) renames usb_configure_device() and
usb_configure_device_otg() in the hub driver.  Neither name is
appropriate because these routines enumerate devices, they don't
configure them.  That's handled by usb_choose_configuration() and
usb_set_configuration().
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/core/hub.c

@@ -1658,12 +1658,12 @@ static inline void announce_device(struct usb_device *udev) { }
 #endif
 
 /**
- * usb_configure_device_otg - FIXME (usbcore-internal)
+ * usb_enumerate_device_otg - FIXME (usbcore-internal)
  * @udev: newly addressed device (in ADDRESS state)
  *
- * Do configuration for On-The-Go devices
+ * Finish enumeration for On-The-Go devices
  */
-static int usb_configure_device_otg(struct usb_device *udev)
+static int usb_enumerate_device_otg(struct usb_device *udev)
 {
 	int err = 0;
 
@@ -1734,7 +1734,7 @@ static int usb_configure_device_otg(struct usb_device *udev)
 
 
 /**
- * usb_configure_device - Detect and probe device intfs/otg (usbcore-internal)
+ * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal)
  * @udev: newly addressed device (in ADDRESS state)
  *
  * This is only called by usb_new_device() and usb_authorize_device()
@@ -1745,7 +1745,7 @@ static int usb_configure_device_otg(struct usb_device *udev)
  * the string descriptors, as they will be errored out by the device
  * until it has been authorized.
  */
-static int usb_configure_device(struct usb_device *udev)
+static int usb_enumerate_device(struct usb_device *udev)
 {
 	int err;
 
@@ -1769,7 +1769,7 @@ static int usb_configure_device(struct usb_device *udev)
 						      udev->descriptor.iManufacturer);
 		udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
 	}
-	err = usb_configure_device_otg(udev);
+	err = usb_enumerate_device_otg(udev);
 fail:
 	return err;
 }
@@ -1779,8 +1779,8 @@ static int usb_configure_device(struct usb_device *udev)
  * usb_new_device - perform initial device setup (usbcore-internal)
  * @udev: newly addressed device (in ADDRESS state)
  *
- * This is called with devices which have been enumerated, but not yet
- * configured.  The device descriptor is available, but not descriptors
+ * This is called with devices which have been detected but not fully
+ * enumerated.  The device descriptor is available, but not descriptors
  * for any device configuration.  The caller must have locked either
  * the parent hub (if udev is a normal device) or else the
  * usb_bus_list_lock (if udev is a root hub).  The parent's pointer to
@@ -1803,8 +1803,8 @@ int usb_new_device(struct usb_device *udev)
 	if (udev->parent)
 		usb_autoresume_device(udev->parent);
 
-	usb_detect_quirks(udev);		/* Determine quirks */
-	err = usb_configure_device(udev);	/* detect & probe dev/intfs */
+	usb_detect_quirks(udev);
+	err = usb_enumerate_device(udev);	/* Read descriptors */
 	if (err < 0)
 		goto fail;
 	dev_dbg(&udev->dev, "udev %d, busnum %d, minor = %d\n",
@@ -1895,9 +1895,9 @@ int usb_authorize_device(struct usb_device *usb_dev)
 		goto error_device_descriptor;
 	}
 	usb_dev->authorized = 1;
-	result = usb_configure_device(usb_dev);
+	result = usb_enumerate_device(usb_dev);
 	if (result < 0)
-		goto error_configure;
+		goto error_enumerate;
 	/* Choose and set the configuration.  This registers the interfaces
 	 * with the driver core and lets interface drivers bind to them.
 	 */
@@ -1912,7 +1912,7 @@ int usb_authorize_device(struct usb_device *usb_dev)
 		}
 	}
 	dev_info(&usb_dev->dev, "authorized to connect\n");
-error_configure:
+error_enumerate:
 error_device_descriptor:
 error_autoresume:
 out_authorized: