[MIPS] TXx9: Miscellaneous build fixes

* Fix build if only RBTX4927 or RBTX4938 was selected.
* Move gpio helpers to generic part.
* Select SOC_TX4938 for RBTX4927/37 board.
* Fix parent of rbtx4938_fpga_resource.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/txx9/Kconfig

@@ -7,6 +7,8 @@ config TOSHIBA_RBTX4927
 	bool "Toshiba RBTX49[23]7 board"
 	depends on MACH_TX49XX
 	select SOC_TX4927
+	# TX4937 is subset of TX4938
+	select SOC_TX4938
 	help
 	  This Toshiba board is based on the TX4927 processor. Say Y here to
 	  support this machine type

arch/mips/txx9/generic/setup.c

@@ -94,6 +94,22 @@ void clk_put(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_put);
 
+/* GPIO support */
+
+#ifdef CONFIG_GENERIC_GPIO
+int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL(gpio_to_irq);
+
+int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL(irq_to_gpio);
+#endif
+
 extern struct txx9_board_vec jmr3927_vec;
 extern struct txx9_board_vec rbtx4927_vec;
 extern struct txx9_board_vec rbtx4937_vec;
@@ -126,15 +142,19 @@ void __init prom_init(void)
 #endif
 #ifdef CONFIG_CPU_TX49XX
 	switch (TX4938_REV_PCODE()) {
+#ifdef CONFIG_TOSHIBA_RBTX4927
 	case 0x4927:
 		txx9_board_vec = &rbtx4927_vec;
 		break;
 	case 0x4937:
 		txx9_board_vec = &rbtx4937_vec;
 		break;
+#endif
+#ifdef CONFIG_TOSHIBA_RBTX4938
 	case 0x4938:
 		txx9_board_vec = &rbtx4938_vec;
 		break;
+#endif
 	}
 #endif
 

arch/mips/txx9/rbtx4938/setup.c

@@ -457,7 +457,7 @@ static void __init rbtx4938_mem_setup(void)
 	rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
 	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
 	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-	if (request_resource(&iomem_resource, &rbtx4938_fpga_resource))
+	if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
 		printk("request resource for fpga failed\n");
 
 	_machine_restart = rbtx4938_machine_restart;
@@ -488,18 +488,6 @@ static int __init rbtx4938_ne_init(void)
 	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 
-/* GPIO support */
-
-int gpio_to_irq(unsigned gpio)
-{
-	return -EINVAL;
-}
-
-int irq_to_gpio(unsigned irq)
-{
-	return -EINVAL;
-}
-
 static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
 
 static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset,