提交 8d082f8f 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix unused warnings when !SND_HDA_NEEDS_RESUME
  ALSA: hda - Add a fix-up for Acer dmic with ALC271x codec
  ASoC: add a module alias to the FSI driver
  ALSA: emu10k1 - Fix "Music" controls to "Synth" controls in documents
  ARM: s3c2440: gta02; Register dfbmcs320 device for BT audio interface
  ASoC: codecs: JZ4740: Fix OOPS
  ASoC: Fix output PGA enabling in wm_hubs CODECs
  ASoC: sn95031: decorate function with __devexit_p()
  ASoC: SAMSUNG: Fix the inverted clocks handling for pcm driver
  ASoC: sst_platform: Fix lock acquring
  ASoC: fsi: driver safely remove for against irq
  ASoC: fsi: modify vague PM control on probe
  ASoC: fsi: take care in failing case of dai register
  MAINTAINERS: Update Samsung ASoC maintainer's id
  ASoC: WM8903: HP and Line out PGA/mixer DAPM fixes
  ASoC: Set left channel volume update bits for WM8994
  ASoC: fix config error path
  ASoC: check channel mismatch between cpu_dai and codec_dai
  ASoC: Tegra: Suspend/resume support
......@@ -87,14 +87,14 @@ accumulator. ALSA uses accumulators 0 and 1 for left and right PCM.
The result is forwarded to the ADC capture FIFO (thus to the standard capture
PCM device).
name='Music Playback Volume',index=0
name='Synth Playback Volume',index=0
This control is used to attenuate samples for left and right MIDI FX-bus
accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples.
The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
name='Music Capture Volume',index=0
name='Music Capture Switch',index=0
name='Synth Capture Volume',index=0
name='Synth Capture Switch',index=0
These controls are used to attenuate samples for left and right MIDI FX-bus
accumulator. ALSA uses accumulators 4 and 5 for left and right PCM.
......
......@@ -5396,7 +5396,7 @@ F: drivers/media/video/*7146*
F: include/media/*7146*
SAMSUNG AUDIO (ASoC) DRIVERS
M: Jassi Brar <jassi.brar@samsung.com>
M: Jassi Brar <jassisinghbrar@gmail.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/samsung
......
......@@ -409,6 +409,10 @@ struct platform_device s3c24xx_pwm_device = {
.num_resources = 0,
};
static struct platform_device gta02_dfbmcs320_device = {
.name = "dfbmcs320",
};
static struct i2c_board_info gta02_i2c_devs[] __initdata = {
{
I2C_BOARD_INFO("pcf50633", 0x73),
......@@ -523,6 +527,7 @@ static struct platform_device *gta02_devices[] __initdata = {
&s3c_device_iis,
&samsung_asoc_dma,
&s3c_device_i2c0,
&gta02_dfbmcs320_device,
&gta02_buttons_device,
&s3c_device_adc,
&s3c_device_ts,
......
......@@ -937,6 +937,7 @@ void snd_hda_shutup_pins(struct hda_codec *codec)
}
EXPORT_SYMBOL_HDA(snd_hda_shutup_pins);
#ifdef SND_HDA_NEEDS_RESUME
/* Restore the pin controls cleared previously via snd_hda_shutup_pins() */
static void restore_shutup_pins(struct hda_codec *codec)
{
......@@ -953,6 +954,7 @@ static void restore_shutup_pins(struct hda_codec *codec)
}
codec->pins_shutup = 0;
}
#endif
static void init_hda_cache(struct hda_cache_rec *cache,
unsigned int record_size);
......@@ -1329,6 +1331,7 @@ static void purify_inactive_streams(struct hda_codec *codec)
}
}
#ifdef SND_HDA_NEEDS_RESUME
/* clean up all streams; called from suspend */
static void hda_cleanup_all_streams(struct hda_codec *codec)
{
......@@ -1340,6 +1343,7 @@ static void hda_cleanup_all_streams(struct hda_codec *codec)
really_cleanup_stream(codec, p);
}
}
#endif
/*
* amp access functions
......
......@@ -14868,6 +14868,23 @@ static void alc269_fixup_hweq(struct hda_codec *codec,
alc_write_coef_idx(codec, 0x1e, coef | 0x80);
}
static void alc271_fixup_dmic(struct hda_codec *codec,
const struct alc_fixup *fix, int action)
{
static struct hda_verb verbs[] = {
{0x20, AC_VERB_SET_COEF_INDEX, 0x0d},
{0x20, AC_VERB_SET_PROC_COEF, 0x4000},
{}
};
unsigned int cfg;
if (strcmp(codec->chip_name, "ALC271X"))
return;
cfg = snd_hda_codec_get_pincfg(codec, 0x12);
if (get_defcfg_connect(cfg) == AC_JACK_PORT_FIXED)
snd_hda_sequence_write(codec, verbs);
}
enum {
ALC269_FIXUP_SONY_VAIO,
ALC275_FIXUP_SONY_VAIO_GPIO2,
......@@ -14876,6 +14893,7 @@ enum {
ALC269_FIXUP_ASUS_G73JW,
ALC269_FIXUP_LENOVO_EAPD,
ALC275_FIXUP_SONY_HWEQ,
ALC271_FIXUP_DMIC,
};
static const struct alc_fixup alc269_fixups[] = {
......@@ -14929,7 +14947,11 @@ static const struct alc_fixup alc269_fixups[] = {
.v.func = alc269_fixup_hweq,
.chained = true,
.chain_id = ALC275_FIXUP_SONY_VAIO_GPIO2
}
},
[ALC271_FIXUP_DMIC] = {
.type = ALC_FIXUP_FUNC,
.v.func = alc271_fixup_dmic,
},
};
static struct snd_pci_quirk alc269_fixup_tbl[] = {
......@@ -14938,6 +14960,7 @@ static struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x104d, 0x9084, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ),
SND_PCI_QUIRK_VENDOR(0x104d, "Sony VAIO", ALC269_FIXUP_SONY_VAIO),
SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
SND_PCI_QUIRK_VENDOR(0x1025, "Acer Aspire", ALC271_FIXUP_DMIC),
SND_PCI_QUIRK(0x17aa, 0x20f2, "Thinkpad SL410/510", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x215e, "Thinkpad L512", ALC269_FIXUP_SKU_IGNORE),
SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE),
......
......@@ -308,8 +308,6 @@ static int jz4740_codec_dev_probe(struct snd_soc_codec *codec)
snd_soc_dapm_add_routes(dapm, jz4740_codec_dapm_routes,
ARRAY_SIZE(jz4740_codec_dapm_routes));
snd_soc_dapm_new_widgets(codec);
jz4740_codec_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
return 0;
......
......@@ -927,7 +927,7 @@ static struct platform_driver sn95031_codec_driver = {
.owner = THIS_MODULE,
},
.probe = sn95031_device_probe,
.remove = sn95031_device_remove,
.remove = __devexit_p(sn95031_device_remove),
};
static int __init sn95031_init(void)
......
......@@ -247,8 +247,6 @@ static int wm8903_volatile_register(struct snd_soc_codec *codec, unsigned int re
case WM8903_REVISION_NUMBER:
case WM8903_INTERRUPT_STATUS_1:
case WM8903_WRITE_SEQUENCER_4:
case WM8903_POWER_MANAGEMENT_3:
case WM8903_POWER_MANAGEMENT_2:
case WM8903_DC_SERVO_READBACK_1:
case WM8903_DC_SERVO_READBACK_2:
case WM8903_DC_SERVO_READBACK_3:
......@@ -875,34 +873,40 @@ SND_SOC_DAPM_MIXER("Left Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 1, 0,
SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0,
right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
SND_SOC_DAPM_PGA_S("Left Headphone Output PGA", 0, WM8903_ANALOGUE_HP_0,
4, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("Right Headphone Output PGA", 0, WM8903_ANALOGUE_HP_0,
SND_SOC_DAPM_PGA_S("Left Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2,
1, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("Right Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2,
0, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("Left Line Output PGA", 0, WM8903_ANALOGUE_LINEOUT_0, 4, 0,
SND_SOC_DAPM_PGA_S("Left Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 1, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("Right Line Output PGA", 0, WM8903_ANALOGUE_LINEOUT_0, 0, 0,
SND_SOC_DAPM_PGA_S("Right Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 0, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("HPL_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 7, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPL_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 6, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPL_ENA_DLY", 1, WM8903_ANALOGUE_HP_0, 5, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPL_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 5, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPL_ENA", 1, WM8903_ANALOGUE_HP_0, 4, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPR_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 3, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPR_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 2, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPR_ENA_DLY", 1, WM8903_ANALOGUE_HP_0, 1, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPR_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 1, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("HPR_ENA", 1, WM8903_ANALOGUE_HP_0, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTL_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 7, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 6, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_DLY", 1, WM8903_ANALOGUE_LINEOUT_0, 5, 0,
SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 5, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTL_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 4, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTR_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 3, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 2, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_DLY", 1, WM8903_ANALOGUE_LINEOUT_0, 1, 0,
SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 1, 0,
NULL, 0),
SND_SOC_DAPM_PGA_S("LINEOUTR_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 0, 0,
NULL, 0),
SND_SOC_DAPM_SUPPLY("DCS Master", WM8903_DC_SERVO_0, 4, 0, NULL, 0),
......@@ -1037,10 +1041,14 @@ static const struct snd_soc_dapm_route intercon[] = {
{ "Left Speaker PGA", NULL, "Left Speaker Mixer" },
{ "Right Speaker PGA", NULL, "Right Speaker Mixer" },
{ "HPL_ENA_DLY", NULL, "Left Headphone Output PGA" },
{ "HPR_ENA_DLY", NULL, "Right Headphone Output PGA" },
{ "LINEOUTL_ENA_DLY", NULL, "Left Line Output PGA" },
{ "LINEOUTR_ENA_DLY", NULL, "Right Line Output PGA" },
{ "HPL_ENA", NULL, "Left Headphone Output PGA" },
{ "HPR_ENA", NULL, "Right Headphone Output PGA" },
{ "HPL_ENA_DLY", NULL, "HPL_ENA" },
{ "HPR_ENA_DLY", NULL, "HPR_ENA" },
{ "LINEOUTL_ENA", NULL, "Left Line Output PGA" },
{ "LINEOUTR_ENA", NULL, "Right Line Output PGA" },
{ "LINEOUTL_ENA_DLY", NULL, "LINEOUTL_ENA" },
{ "LINEOUTR_ENA_DLY", NULL, "LINEOUTR_ENA" },
{ "HPL_DCS", NULL, "DCS Master" },
{ "HPR_DCS", NULL, "DCS Master" },
......
......@@ -3261,20 +3261,36 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
wm8994_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Latch volume updates (right only; we always do left then right). */
snd_soc_update_bits(codec, WM8994_AIF1_DAC1_LEFT_VOLUME,
WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU);
snd_soc_update_bits(codec, WM8994_AIF1_DAC1_RIGHT_VOLUME,
WM8994_AIF1DAC1_VU, WM8994_AIF1DAC1_VU);
snd_soc_update_bits(codec, WM8994_AIF1_DAC2_LEFT_VOLUME,
WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU);
snd_soc_update_bits(codec, WM8994_AIF1_DAC2_RIGHT_VOLUME,
WM8994_AIF1DAC2_VU, WM8994_AIF1DAC2_VU);
snd_soc_update_bits(codec, WM8994_AIF2_DAC_LEFT_VOLUME,
WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU);
snd_soc_update_bits(codec, WM8994_AIF2_DAC_RIGHT_VOLUME,
WM8994_AIF2DAC_VU, WM8994_AIF2DAC_VU);
snd_soc_update_bits(codec, WM8994_AIF1_ADC1_LEFT_VOLUME,
WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU);
snd_soc_update_bits(codec, WM8994_AIF1_ADC1_RIGHT_VOLUME,
WM8994_AIF1ADC1_VU, WM8994_AIF1ADC1_VU);
snd_soc_update_bits(codec, WM8994_AIF1_ADC2_LEFT_VOLUME,
WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU);
snd_soc_update_bits(codec, WM8994_AIF1_ADC2_RIGHT_VOLUME,
WM8994_AIF1ADC2_VU, WM8994_AIF1ADC2_VU);
snd_soc_update_bits(codec, WM8994_AIF2_ADC_LEFT_VOLUME,
WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU);
snd_soc_update_bits(codec, WM8994_AIF2_ADC_RIGHT_VOLUME,
WM8994_AIF2ADC_VU, WM8994_AIF1ADC2_VU);
snd_soc_update_bits(codec, WM8994_DAC1_LEFT_VOLUME,
WM8994_DAC1_VU, WM8994_DAC1_VU);
snd_soc_update_bits(codec, WM8994_DAC1_RIGHT_VOLUME,
WM8994_DAC1_VU, WM8994_DAC1_VU);
snd_soc_update_bits(codec, WM8994_DAC2_LEFT_VOLUME,
WM8994_DAC2_VU, WM8994_DAC2_VU);
snd_soc_update_bits(codec, WM8994_DAC2_RIGHT_VOLUME,
WM8994_DAC2_VU, WM8994_DAC2_VU);
......
......@@ -740,12 +740,12 @@ static const struct snd_soc_dapm_route analogue_routes[] = {
{ "SPKL", "Input Switch", "MIXINL" },
{ "SPKL", "IN1LP Switch", "IN1LP" },
{ "SPKL", "Output Switch", "Left Output Mixer" },
{ "SPKL", "Output Switch", "Left Output PGA" },
{ "SPKL", NULL, "TOCLK" },
{ "SPKR", "Input Switch", "MIXINR" },
{ "SPKR", "IN1RP Switch", "IN1RP" },
{ "SPKR", "Output Switch", "Right Output Mixer" },
{ "SPKR", "Output Switch", "Right Output PGA" },
{ "SPKR", NULL, "TOCLK" },
{ "SPKL Boost", "Direct Voice Switch", "Direct Voice" },
......@@ -767,8 +767,8 @@ static const struct snd_soc_dapm_route analogue_routes[] = {
{ "SPKOUTRP", NULL, "SPKR Driver" },
{ "SPKOUTRN", NULL, "SPKR Driver" },
{ "Left Headphone Mux", "Mixer", "Left Output Mixer" },
{ "Right Headphone Mux", "Mixer", "Right Output Mixer" },
{ "Left Headphone Mux", "Mixer", "Left Output PGA" },
{ "Right Headphone Mux", "Mixer", "Right Output PGA" },
{ "Headphone PGA", NULL, "Left Headphone Mux" },
{ "Headphone PGA", NULL, "Right Headphone Mux" },
......
......@@ -116,18 +116,20 @@ struct snd_soc_dai_driver sst_platform_dai[] = {
static inline void sst_set_stream_status(struct sst_runtime_stream *stream,
int state)
{
spin_lock(&stream->status_lock);
unsigned long flags;
spin_lock_irqsave(&stream->status_lock, flags);
stream->stream_status = state;
spin_unlock(&stream->status_lock);
spin_unlock_irqrestore(&stream->status_lock, flags);
}
static inline int sst_get_stream_status(struct sst_runtime_stream *stream)
{
int state;
unsigned long flags;
spin_lock(&stream->status_lock);
spin_lock_irqsave(&stream->status_lock, flags);
state = stream->stream_status;
spin_unlock(&stream->status_lock);
spin_unlock_irqrestore(&stream->status_lock, flags);
return state;
}
......
......@@ -350,8 +350,8 @@ static int s3c_pcm_set_fmt(struct snd_soc_dai *cpu_dai,
ctl = readl(regs + S3C_PCM_CTL);
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
/* Nothing to do, NB_NF by default */
case SND_SOC_DAIFMT_IB_NF:
/* Nothing to do, IB_NF by default */
break;
default:
dev_err(pcm->dev, "Unsupported clock inversion!\n");
......
......@@ -1200,10 +1200,11 @@ static int fsi_probe(struct platform_device *pdev)
master->fsib.master = master;
pm_runtime_enable(&pdev->dev);
pm_runtime_resume(&pdev->dev);
dev_set_drvdata(&pdev->dev, master);
pm_runtime_get_sync(&pdev->dev);
fsi_soft_all_reset(master);
pm_runtime_put_sync(&pdev->dev);
ret = request_irq(irq, &fsi_interrupt, IRQF_DISABLED,
id_entry->name, master);
......@@ -1218,8 +1219,17 @@ static int fsi_probe(struct platform_device *pdev)
goto exit_free_irq;
}
return snd_soc_register_dais(&pdev->dev, fsi_soc_dai, ARRAY_SIZE(fsi_soc_dai));
ret = snd_soc_register_dais(&pdev->dev, fsi_soc_dai,
ARRAY_SIZE(fsi_soc_dai));
if (ret < 0) {
dev_err(&pdev->dev, "cannot snd dai register\n");
goto exit_snd_soc;
}
return ret;
exit_snd_soc:
snd_soc_unregister_platform(&pdev->dev);
exit_free_irq:
free_irq(irq, master);
exit_iounmap:
......@@ -1238,12 +1248,11 @@ static int fsi_remove(struct platform_device *pdev)
master = dev_get_drvdata(&pdev->dev);
snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(fsi_soc_dai));
snd_soc_unregister_platform(&pdev->dev);
free_irq(master->irq, master);
pm_runtime_disable(&pdev->dev);
free_irq(master->irq, master);
snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(fsi_soc_dai));
snd_soc_unregister_platform(&pdev->dev);
iounmap(master->base);
kfree(master);
......@@ -1321,3 +1330,4 @@ module_exit(fsi_mobile_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("SuperH onchip FSI audio driver");
MODULE_AUTHOR("Kuninori Morimoto <morimoto.kuninori@renesas.com>");
MODULE_ALIAS("platform:fsi-pcm-audio");
......@@ -629,6 +629,7 @@ static int soc_pcm_open(struct snd_pcm_substream *substream)
runtime->hw.rates |= codec_dai_drv->capture.rates;
}
ret = -EINVAL;
snd_pcm_limit_hw_rates(runtime);
if (!runtime->hw.rates) {
printk(KERN_ERR "asoc: %s <-> %s No matching rates\n",
......@@ -640,7 +641,8 @@ static int soc_pcm_open(struct snd_pcm_substream *substream)
codec_dai->name, cpu_dai->name);
goto config_err;
}
if (!runtime->hw.channels_min || !runtime->hw.channels_max) {
if (!runtime->hw.channels_min || !runtime->hw.channels_max ||
runtime->hw.channels_min > runtime->hw.channels_max) {
printk(KERN_ERR "asoc: %s <-> %s No matching channels\n",
codec_dai->name, cpu_dai->name);
goto config_err;
......@@ -2060,6 +2062,7 @@ const struct dev_pm_ops snd_soc_pm_ops = {
.resume = snd_soc_resume,
.poweroff = snd_soc_poweroff,
};
EXPORT_SYMBOL_GPL(snd_soc_pm_ops);
/* ASoC platform driver */
static struct platform_driver soc_driver = {
......
......@@ -370,6 +370,7 @@ static struct platform_driver tegra_snd_harmony_driver = {
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
.pm = &snd_soc_pm_ops,
},
.probe = tegra_snd_harmony_probe,
.remove = __devexit_p(tegra_snd_harmony_remove),
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册