[PATCH] PCI: PCI/Cardbus cards hidden, needs pci=assign-busses to fix

"In some cases, especially on modern laptops with a lot of PCI and cardbus
bridges, we're unable to assign correct secondary/subordinate bus numbers
to all cardbus bridges due to BIOS limitations unless we are using
"pci=assign-busses" boot option." -- Ivan Kokshaysky (from a patch comment)

Without it, Cardbus cards inserted are never seen by PCI because the parent
PCI-PCI Bridge of the Cardbus bridge will not pass and translate Type 1 PCI
configuration cycles correctly and the system will fail to find and
initialise the PCI devices in the system.

Reference: PCI-PCI Bridges: PCI Configuration Cycles and PCI Bus Numbering:
http://www.science.unitn.it/~fiorella/guidelinux/tlk/node72.html

The reason for this is that:
 ``All PCI busses located behind a PCI-PCI bridge must reside between the
secondary bus number and the subordinate bus number (inclusive).''

"pci=assign-busses" makes pcibios_assign_all_busses return 1 and this
turns on PCI renumbering during PCI probing.

Alan suggested to use DMI automatically set assign-busses on problem systems.

The only question for me was where to put it.  I put it directly before
scanning PCI bus into pcibios_scan_root() because it's called from legacy,
acpi and numa and so it can be one place for all systems and configurations
which may need it.

AMD64 Laptops are also affected and fixed by assign-busses, and the code is
also incuded from arch/x86_64/pci/ that place will also work for x86_64
kernels, I only ifdef'-ed the x86-only Laptop in this example.

Affected and known or assumed to be fixed with it are (found by googling):

* ASUS Z71V and L3s
* Samsung X20
* Compaq R3140us and all Compaq R3000 series laptops with TI1620 Controller,
  also Compaq R4000 series (from a kernel.org bugreport)
* HP zv5000z (AMD64 3700+, known that fixup_parent_subordinate_busnr fixes it)
* HP zv5200z
* IBM ThinkPad 240
* An IBM ThinkPad (1.8 GHz Pentium M) debugged by Pavel Machek
  gives the correspondig message which detects the possible problem.
* MSI S260 / Medion SIM 2100 MD 95600

The patch also expands the "try pci=assign-busses" warning so testers will
help us to update the DMI table.

Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

arch/i386/pci/common.c

@@ -8,6 +8,7 @@
 #include <linux/pci.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
+#include <linux/dmi.h>
 
 #include <asm/acpi.h>
 #include <asm/segment.h>
@@ -120,11 +121,42 @@ void __devinit  pcibios_fixup_bus(struct pci_bus *b)
 	pci_read_bridge_bases(b);
 }
 
+/*
+ * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus)
+ */
+#ifdef __i386__
+static int __devinit assign_all_busses(struct dmi_system_id *d)
+{
+	pci_probe |= PCI_ASSIGN_ALL_BUSSES;
+	printk(KERN_INFO "%s detected: enabling PCI bus# renumbering"
+			" (pci=assign-busses)\n", d->ident);
+	return 0;
+}
+#endif
+
+/*
+ * Laptops which need pci=assign-busses to see Cardbus cards
+ */
+static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
+#ifdef __i386__
+	{
+		.callback = assign_all_busses,
+		.ident = "Samsung X20 Laptop",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"),
+		},
+	},
+#endif		/* __i386__ */
+	{}
+};
 
 struct pci_bus * __devinit pcibios_scan_root(int busnum)
 {
 	struct pci_bus *bus = NULL;
 
+	dmi_check_system(pciprobe_dmi_table);
+
 	while ((bus = pci_find_next_bus(bus)) != NULL) {
 		if (bus->number == busnum) {
 			/* Already scanned */

drivers/pci/probe.c

@@ -589,13 +589,15 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max
 		    (child->number > bus->subordinate) ||
 		    (child->number < bus->number) ||
 		    (child->subordinate < bus->number)) {
-			printk(KERN_WARNING "PCI: Bus #%02x (-#%02x) may be "
+			printk(KERN_WARNING "PCI: Bus #%02x (-#%02x) is "
 			       "hidden behind%s bridge #%02x (-#%02x)%s\n",
 			       child->number, child->subordinate,
 			       bus->self->transparent ? " transparent" : " ",
 			       bus->number, bus->subordinate,
 			       pcibios_assign_all_busses() ? " " :
 			       " (try 'pci=assign-busses')");
+			printk(KERN_WARNING "Please report the result to "
+			       "linux-kernel to fix this permanently\n");
 		}
 		bus = bus->parent;
 	}