ath6kl: Include P2P IE(s) in GO Probe Response depending on request

P2P has special rules on when to include P2P IE(s) in Probe Response
frame based on the Probe Request frame. Handle P2P IE(s) separately
to follow these rules.
Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath6kl/cfg80211.c

@@ -1518,6 +1518,48 @@ static int ath6kl_set_channel(struct wiphy *wiphy, struct net_device *dev,
 	return 0;
 }
 
+static bool ath6kl_is_p2p_ie(const u8 *pos)
+{
+	return pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
+		pos[2] == 0x50 && pos[3] == 0x6f &&
+		pos[4] == 0x9a && pos[5] == 0x09;
+}
+
+static int ath6kl_set_ap_probe_resp_ies(struct ath6kl *ar, const u8 *ies,
+					size_t ies_len)
+{
+	const u8 *pos;
+	u8 *buf = NULL;
+	size_t len = 0;
+	int ret;
+
+	/*
+	 * Filter out P2P IE(s) since they will be included depending on
+	 * the Probe Request frame in ath6kl_send_go_probe_resp().
+	 */
+
+	if (ies && ies_len) {
+		buf = kmalloc(ies_len, GFP_KERNEL);
+		if (buf == NULL)
+			return -ENOMEM;
+		pos = ies;
+		while (pos + 1 < ies + ies_len) {
+			if (pos + 2 + pos[1] > ies + ies_len)
+				break;
+			if (!ath6kl_is_p2p_ie(pos)) {
+				memcpy(buf + len, pos, 2 + pos[1]);
+				len += 2 + pos[1];
+			}
+			pos += 2 + pos[1];
+		}
+	}
+
+	ret = ath6kl_wmi_set_appie_cmd(ar->wmi, WMI_FRAME_PROBE_RESP,
+				       buf, len);
+	kfree(buf);
+	return ret;
+}
+
 static int ath6kl_ap_beacon(struct wiphy *wiphy, struct net_device *dev,
 			    struct beacon_parameters *info, bool add)
 {
@@ -1545,9 +1587,8 @@ static int ath6kl_ap_beacon(struct wiphy *wiphy, struct net_device *dev,
 			return res;
 	}
 	if (info->proberesp_ies) {
-		res = ath6kl_wmi_set_appie_cmd(ar->wmi, WMI_FRAME_PROBE_RESP,
-					       info->proberesp_ies,
-					       info->proberesp_ies_len);
+		res = ath6kl_set_ap_probe_resp_ies(ar, info->proberesp_ies,
+						   info->proberesp_ies_len);
 		if (res)
 			return res;
 	}
@@ -1735,6 +1776,41 @@ static int ath6kl_cancel_remain_on_channel(struct wiphy *wiphy,
 	return ath6kl_wmi_cancel_remain_on_chnl_cmd(ar->wmi);
 }
 
+static int ath6kl_send_go_probe_resp(struct ath6kl *ar, const u8 *buf,
+				     size_t len, unsigned int freq)
+{
+	const u8 *pos;
+	u8 *p2p;
+	int p2p_len;
+	int ret;
+	const struct ieee80211_mgmt *mgmt;
+
+	mgmt = (const struct ieee80211_mgmt *) buf;
+
+	/* Include P2P IE(s) from the frame generated in user space. */
+
+	p2p = kmalloc(len, GFP_KERNEL);
+	if (p2p == NULL)
+		return -ENOMEM;
+	p2p_len = 0;
+
+	pos = mgmt->u.probe_resp.variable;
+	while (pos + 1 < buf + len) {
+		if (pos + 2 + pos[1] > buf + len)
+			break;
+		if (ath6kl_is_p2p_ie(pos)) {
+			memcpy(p2p + p2p_len, pos, 2 + pos[1]);
+			p2p_len += 2 + pos[1];
+		}
+		pos += 2 + pos[1];
+	}
+
+	ret = ath6kl_wmi_send_probe_response_cmd(ar->wmi, freq, mgmt->da,
+						 p2p, p2p_len);
+	kfree(p2p);
+	return ret;
+}
+
 static int ath6kl_mgmt_tx(struct wiphy *wiphy, struct net_device *dev,
 			  struct ieee80211_channel *chan, bool offchan,
 			  enum nl80211_channel_type channel_type,
@@ -1743,6 +1819,20 @@ static int ath6kl_mgmt_tx(struct wiphy *wiphy, struct net_device *dev,
 {
 	struct ath6kl *ar = ath6kl_priv(dev);
 	u32 id;
+	const struct ieee80211_mgmt *mgmt;
+
+	mgmt = (const struct ieee80211_mgmt *) buf;
+	if (buf + len >= mgmt->u.probe_resp.variable &&
+	    ar->nw_type == AP_NETWORK && test_bit(CONNECTED, &ar->flag) &&
+	    ieee80211_is_probe_resp(mgmt->frame_control)) {
+		/*
+		 * Send Probe Response frame in AP mode using a separate WMI
+		 * command to allow the target to fill in the generic IEs.
+		 */
+		*cookie = 0; /* TX status not supported */
+		return ath6kl_send_go_probe_resp(ar, buf, len,
+						 chan->center_freq);
+	}
 
 	id = ar->send_action_id++;
 	if (id == 0) {