Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 8bcee183 编写于 作者: P Paul Mundt
浏览文件
操作

Merge branch 'rmobile/urgent' into rmobile-latest 

Conflicts:
	arch/arm/mach-shmobile/include/mach/entry-macro.S
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 5ce2a2dd 1cf215a5
展开全部 隐藏空白更改
内联 并排
Showing with 8720 addition and 6079 deletion
Documentation/ABI/testing/sysfs-bus-rbd 0 → 100644
浏览文件 @ 8bcee183
What: /sys/bus/rbd/
Date: November 2010
Contact: Yehuda Sadeh <yehuda@hq.newdream.net>,
Sage Weil <sage@newdream.net>
Description:
Being used for adding and removing rbd block devices.
Usage: <mon ip addr> <options> <pool name> <rbd image name> [snap name]
$ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add
The snapshot name can be "-" or omitted to map the image read/write. A <dev-id>
will be assigned for any registered block device. If snapshot is used, it will
be mapped read-only.
Removal of a device:
$ echo <dev-id> > /sys/bus/rbd/remove
Entries under /sys/bus/rbd/devices/<dev-id>/
--------------------------------------------
client_id
The ceph unique client id that was assigned for this specific session.
major
The block device major number.
name
The name of the rbd image.
pool
The pool where this rbd image resides. The pool-name pair is unique
per rados system.
size
The size (in bytes) of the mapped block device.
refresh
Writing to this file will reread the image header data and set
all relevant datastructures accordingly.
current_snap
The current snapshot for which the device is mapped.
create_snap
Create a snapshot:
$ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
rollback_snap
Rolls back data to the specified snapshot. This goes over the entire
list of rados blocks and sends a rollback command to each.
$ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
snap_*
A directory per each snapshot
Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
-------------------------------------------------------------
id
The rados internal snapshot id assigned for this snapshot
size
The size of the image when this snapshot was taken.
Documentation/ABI/testing/sysfs-platform-asus-laptop
浏览文件 @ 8bcee183
......@@ -47,6 +47,20 @@ Date: January 2007
KernelVersion: 2.6.20
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Control the bluetooth device. 1 means on, 0 means off.
Control the wlan device. 1 means on, 0 means off.
This may control the led, the device or both.
Users: Lapsus
What: /sys/devices/platform/asus_laptop/wimax
Date: October 2010
KernelVersion: 2.6.37
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Control the wimax device. 1 means on, 0 means off.
What: /sys/devices/platform/asus_laptop/wwan
Date: October 2010
KernelVersion: 2.6.37
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Control the wwan (3G) device. 1 means on, 0 means off.
Documentation/ABI/testing/sysfs-platform-eeepc-wmi 0 → 100644
浏览文件 @ 8bcee183
What: /sys/devices/platform/eeepc-wmi/cpufv
Date: Oct 2010
KernelVersion: 2.6.37
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Change CPU clock configuration (write-only).
There are three available clock configuration:
* 0 -> Super Performance Mode
* 1 -> High Performance Mode
* 2 -> Power Saving Mode
Documentation/driver-model/interface.txt 已删除 100644 → 0
浏览文件 @ 5ce2a2dd
Device Interfaces
Introduction
~~~~~~~~~~~~
Device interfaces are the logical interfaces of device classes that correlate
directly to userspace interfaces, like device nodes.
Each device class may have multiple interfaces through which you can
access the same device. An input device may support the mouse interface,
the 'evdev' interface, and the touchscreen interface. A SCSI disk would
support the disk interface, the SCSI generic interface, and possibly a raw
device interface.
Device interfaces are registered with the class they belong to. As devices
are added to the class, they are added to each interface registered with
the class. The interface is responsible for determining whether the device
supports the interface or not.
Programming Interface
~~~~~~~~~~~~~~~~~~~~~
struct device_interface {
char * name;
rwlock_t lock;
u32 devnum;
struct device_class * devclass;
struct list_head node;
struct driver_dir_entry dir;
int (*add_device)(struct device *);
int (*add_device)(struct intf_data *);
};
int interface_register(struct device_interface *);
void interface_unregister(struct device_interface *);
An interface must specify the device class it belongs to. It is added
to that class's list of interfaces on registration.
Interfaces can be added to a device class at any time. Whenever it is
added, each device in the class is passed to the interface's
add_device callback. When an interface is removed, each device is
removed from the interface.
Devices
~~~~~~~
Once a device is added to a device class, it is added to each
interface that is registered with the device class. The class
is expected to place a class-specific data structure in
struct device::class_data. The interface can use that (along with
other fields of struct device) to determine whether or not the driver
and/or device support that particular interface.
Data
~~~~
struct intf_data {
struct list_head node;
struct device_interface * intf;
struct device * dev;
u32 intf_num;
};
int interface_add_data(struct interface_data *);
The interface is responsible for allocating and initializing a struct
intf_data and calling interface_add_data() to add it to the device's list
of interfaces it belongs to. This list will be iterated over when the device
is removed from the class (instead of all possible interfaces for a class).
This structure should probably be embedded in whatever per-device data
structure the interface is allocating anyway.
Devices are enumerated within the interface. This happens in interface_add_data()
and the enumerated value is stored in the struct intf_data for that device.
sysfs
~~~~~
Each interface is given a directory in the directory of the device
class it belongs to:
Interfaces get a directory in the class's directory as well:
class/
`-- input
|-- devices
|-- drivers
|-- mouse
`-- evdev
When a device is added to the interface, a symlink is created that points
to the device's directory in the physical hierarchy:
class/
`-- input
|-- devices
| `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
|-- drivers
| `-- usb:usb_mouse -> ../../../bus/drivers/usb_mouse/
|-- mouse
| `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
`-- evdev
`-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
Future Plans
~~~~~~~~~~~~
A device interface is correlated directly with a userspace interface
for a device, specifically a device node. For instance, a SCSI disk
exposes at least two interfaces to userspace: the standard SCSI disk
interface and the SCSI generic interface. It might also export a raw
device interface.
Many interfaces have a major number associated with them and each
device gets a minor number. Or, multiple interfaces might share one
major number, and each will receive a range of minor numbers (like in
the case of input devices).
These major and minor numbers could be stored in the interface
structure. Major and minor allocations could happen when the interface
is registered with the class, or via a helper function.
Documentation/edac.txt
浏览文件 @ 8bcee183
......@@ -196,7 +196,7 @@ csrow3.
The representation of the above is reflected in the directory tree
in EDAC's sysfs interface. Starting in directory
/sys/devices/system/edac/mc each memory controller will be represented
by its own 'mcX' directory, where 'X" is the index of the MC.
by its own 'mcX' directory, where 'X' is the index of the MC.
..../edac/mc/
......@@ -207,7 +207,7 @@ by its own 'mcX' directory, where 'X" is the index of the MC.
....
Under each 'mcX' directory each 'csrowX' is again represented by a
'csrowX', where 'X" is the csrow index:
'csrowX', where 'X' is the csrow index:
.../mc/mc0/
......@@ -232,7 +232,7 @@ EDAC control and attribute files.
In 'mcX' directories are EDAC control and attribute files for
this 'X" instance of the memory controllers:
this 'X' instance of the memory controllers:
Counter reset control file:
......@@ -343,7 +343,7 @@ Sdram memory scrubbing rate:
'csrowX' DIRECTORIES
In the 'csrowX' directories are EDAC control and attribute files for
this 'X" instance of csrow:
this 'X' instance of csrow:
Total Uncorrectable Errors count attribute file:
......
Documentation/filesystems/Locking
浏览文件 @ 8bcee183
......@@ -173,12 +173,13 @@ prototypes:
sector_t (*bmap)(struct address_space *, sector_t);
int (*invalidatepage) (struct page *, unsigned long);
int (*releasepage) (struct page *, int);
void (*freepage)(struct page *);
int (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
loff_t offset, unsigned long nr_segs);
int (*launder_page) (struct page *);
locking rules:
All except set_page_dirty may block
All except set_page_dirty and freepage may block
BKL PageLocked(page) i_mutex
writepage: no yes, unlocks (see below)
......@@ -193,6 +194,7 @@ perform_write: no n/a yes
bmap: no
invalidatepage: no yes
releasepage: no yes
freepage: no yes
direct_IO: no
launder_page: no yes
......@@ -288,6 +290,9 @@ buffers from the page in preparation for freeing it. It returns zero to
indicate that the buffers are (or may be) freeable. If ->releasepage is zero,
the kernel assumes that the fs has no private interest in the buffers.
->freepage() is called when the kernel is done dropping the page
from the page cache.
->launder_page() may be called prior to releasing a page if
it is still found to be dirty. It returns zero if the page was successfully
cleaned, or an error value if not. Note that in order to prevent the page
......
Documentation/filesystems/vfs.txt
浏览文件 @ 8bcee183
......@@ -534,6 +534,7 @@ struct address_space_operations {
sector_t (*bmap)(struct address_space *, sector_t);
int (*invalidatepage) (struct page *, unsigned long);
int (*releasepage) (struct page *, int);
void (*freepage)(struct page *);
ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
loff_t offset, unsigned long nr_segs);
struct page* (*get_xip_page)(struct address_space *, sector_t,
......@@ -660,11 +661,10 @@ struct address_space_operations {
releasepage: releasepage is called on PagePrivate pages to indicate
that the page should be freed if possible. ->releasepage
should remove any private data from the page and clear the
PagePrivate flag. It may also remove the page from the
address_space. If this fails for some reason, it may indicate
failure with a 0 return value.
This is used in two distinct though related cases. The first
is when the VM finds a clean page with no active users and
PagePrivate flag. If releasepage() fails for some reason, it must
indicate failure with a 0 return value.
releasepage() is used in two distinct though related cases. The
first is when the VM finds a clean page with no active users and
wants to make it a free page. If ->releasepage succeeds, the
page will be removed from the address_space and become free.
......@@ -679,6 +679,12 @@ struct address_space_operations {
need to ensure this. Possibly it can clear the PageUptodate
bit if it cannot free private data yet.
freepage: freepage is called once the page is no longer visible in
the page cache in order to allow the cleanup of any private
data. Since it may be called by the memory reclaimer, it
should not assume that the original address_space mapping still
exists, and it should not block.
direct_IO: called by the generic read/write routines to perform
direct_IO - that is IO requests which bypass the page cache
and transfer data directly between the storage and the
......
Documentation/networking/ip-sysctl.txt
浏览文件 @ 8bcee183
......@@ -144,6 +144,7 @@ tcp_adv_win_scale - INTEGER
Count buffering overhead as bytes/2^tcp_adv_win_scale
(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
if it is <= 0.
Possible values are [-31, 31], inclusive.
Default: 2
tcp_allowed_congestion_control - STRING
......
MAINTAINERS
浏览文件 @ 8bcee183
......@@ -559,14 +559,14 @@ W: http://maxim.org.za/at91_26.html
S: Maintained
ARM/BCMRING ARM ARCHITECTURE
M: Leo Chen <leochen@broadcom.com>
M: Jiandong Zheng <jdzheng@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-bcmring
ARM/BCMRING MTD NAND DRIVER
M: Leo Chen <leochen@broadcom.com>
M: Jiandong Zheng <jdzheng@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
L: linux-mtd@lists.infradead.org
S: Maintained
......@@ -815,7 +815,7 @@ F: drivers/mmc/host/msm_sdcc.c
F: drivers/mmc/host/msm_sdcc.h
F: drivers/serial/msm_serial.h
F: drivers/serial/msm_serial.c
T: git git://codeaurora.org/quic/kernel/dwalker/linux-msm.git
T: git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
S: Maintained
ARM/TOSA MACHINE SUPPORT
......@@ -2060,7 +2060,7 @@ F: Documentation/blockdev/drbd/
DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
M: Greg Kroah-Hartman <gregkh@suse.de>
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
S: Supported
F: Documentation/kobject.txt
F: drivers/base/
......@@ -2080,7 +2080,7 @@ F: include/drm/
INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
M: Chris Wilson <chris@chris-wilson.co.uk>
L: intel-gfx@lists.freedesktop.org
L: intel-gfx@lists.freedesktop.org (subscribers-only)
L: dri-devel@lists.freedesktop.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git
S: Supported
......@@ -4064,9 +4064,8 @@ F: drivers/scsi/NCR_D700.*
NETEFFECT IWARP RNIC DRIVER (IW_NES)
M: Faisal Latif <faisal.latif@intel.com>
M: Chien Tung <chien.tin.tung@intel.com>
L: linux-rdma@vger.kernel.org
W: http://www.neteffect.com
W: http://www.intel.com/Products/Server/Adapters/Server-Cluster/Server-Cluster-overview.htm
S: Supported
F: drivers/infiniband/hw/nes/
......@@ -5933,7 +5932,6 @@ F: include/linux/tty.h
TULIP NETWORK DRIVERS
M: Grant Grundler <grundler@parisc-linux.org>
M: Kyle McMartin <kyle@mcmartin.ca>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/tulip/
......@@ -6585,6 +6583,15 @@ F: include/linux/mfd/wm8400*
F: include/sound/wm????.h
F: sound/soc/codecs/wm*
WORKQUEUE
M: Tejun Heo <tj@kernel.org>
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git
S: Maintained
F: include/linux/workqueue.h
F: kernel/workqueue.c
F: Documentation/workqueue.txt
X.25 NETWORK LAYER
M: Andrew Hendry <andrew.hendry@gmail.com>
L: linux-x25@vger.kernel.org
......
Makefile
浏览文件 @ 8bcee183
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 37
EXTRAVERSION = -rc3
EXTRAVERSION = -rc6
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
......
arch/arm/Kconfig
浏览文件 @ 8bcee183
......@@ -9,7 +9,7 @@ config ARM
select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
......@@ -1316,7 +1316,7 @@ config HZ
config THUMB2_KERNEL
bool "Compile the kernel in Thumb-2 mode"
depends on CPU_V7 && EXPERIMENTAL
depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
select AEABI
select ARM_ASM_UNIFIED
help
......@@ -1764,7 +1764,7 @@ comment "At least one emulation must be selected"
config FPE_NWFPE
bool "NWFPE math emulation"
depends on !AEABI || OABI_COMPAT
depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
---help---
Say Y to include the NWFPE floating point emulator in the kernel.
This is necessary to run most binaries. Linux does not currently
......
arch/arm/boot/Makefile
浏览文件 @ 8bcee183
......@@ -70,12 +70,7 @@ else
$(obj)/uImage: LOADADDR=$(ZRELADDR)
endif
ifeq ($(CONFIG_THUMB2_KERNEL),y)
# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
else
$(obj)/uImage: STARTADDR=$(LOADADDR)
endif
$(obj)/uImage: $(obj)/zImage FORCE
$(call if_changed,uimage)
......
arch/arm/boot/bootp/init.S
浏览文件 @ 8bcee183
......@@ -73,6 +73,8 @@ move: ldmia r4!, {r7 - r10} @ move 32-bytes at a time
.size _start, . - _start
.align
.type data,#object
data: .word initrd_start @ source initrd address
.word initrd_phys @ destination initrd address
......
arch/arm/boot/compressed/head.S
浏览文件 @ 8bcee183
......@@ -125,9 +125,13 @@ wait: mrc p14, 0, pc, c0, c1, 0
* sort out different calling conventions
*/
.align
.arm @ Always enter in ARM state
start:
.type start,#function
.rept 8
THUMB( adr r12, BSYM(1f) )
THUMB( bx r12 )
THUMB( .rept 6 )
ARM( .rept 8 )
mov r0, r0
.endr
......@@ -135,6 +139,7 @@ start:
.word 0x016f2818 @ Magic numbers to help the loader
.word start @ absolute load/run zImage address
.word _edata @ zImage end address
THUMB( .thumb )
1: mov r7, r1 @ save architecture ID
mov r8, r2 @ save atags pointer
......@@ -174,7 +179,8 @@ not_angel:
ldr sp, [r0, #28]
#ifdef CONFIG_AUTO_ZRELADDR
@ determine final kernel image address
and r4, pc, #0xf8000000
mov r4, pc
and r4, r4, #0xf8000000
add r4, r4, #TEXT_OFFSET
#else
ldr r4, =zreladdr
......@@ -445,7 +451,8 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size
*/
mov r1, #0x1e
orr r1, r1, #3 << 10
mov r2, pc, lsr #20
mov r2, pc
mov r2, r2, lsr #20
orr r1, r1, r2, lsl #20
add r0, r3, r2, lsl #2
str r1, [r0], #4
......
arch/arm/common/gic.c
浏览文件 @ 8bcee183
......@@ -146,9 +146,15 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
unsigned int shift = (irq % 4) * 8;
unsigned int cpu = cpumask_first(mask_val);
u32 val;
struct irq_desc *desc;
spin_lock(&irq_controller_lock);
irq_desc[irq].node = cpu;
desc = irq_to_desc(irq);
if (desc == NULL) {
spin_unlock(&irq_controller_lock);
return -EINVAL;
}
desc->node = cpu;
val = readl(reg) & ~(0xff << shift);
val |= 1 << (cpu + shift);
writel(val, reg);
......@@ -210,7 +216,7 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
unsigned int irq_start)
{
unsigned int max_irq, i;
unsigned int gic_irqs, irq_limit, i;
u32 cpumask = 1 << smp_processor_id();
if (gic_nr >= MAX_GIC_NR)
......@@ -226,47 +232,49 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
/*
* Find out how many interrupts are supported.
*/
max_irq = readl(base + GIC_DIST_CTR) & 0x1f;
max_irq = (max_irq + 1) * 32;
/*
* The GIC only supports up to 1020 interrupt sources.
* Limit this to either the architected maximum, or the
* platform maximum.
*/
if (max_irq > max(1020, NR_IRQS))
max_irq = max(1020, NR_IRQS);
gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
gic_irqs = (gic_irqs + 1) * 32;
if (gic_irqs > 1020)
gic_irqs = 1020;
/*
* Set all global interrupts to be level triggered, active low.
*/
for (i = 32; i < max_irq; i += 16)
for (i = 32; i < gic_irqs; i += 16)
writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
/*
* Set all global interrupts to this CPU only.
*/
for (i = 32; i < max_irq; i += 4)
for (i = 32; i < gic_irqs; i += 4)
writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
/*
* Set priority on all global interrupts.
*/
for (i = 32; i < max_irq; i += 4)
for (i = 32; i < gic_irqs; i += 4)
writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
/*
* Disable all interrupts. Leave the PPI and SGIs alone
* as these enables are banked registers.
*/
for (i = 32; i < max_irq; i += 32)
for (i = 32; i < gic_irqs; i += 32)
writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
/*
* Limit number of interrupts registered to the platform maximum
*/
irq_limit = gic_data[gic_nr].irq_offset + gic_irqs;
if (WARN_ON(irq_limit > NR_IRQS))
irq_limit = NR_IRQS;
/*
* Setup the Linux IRQ subsystem.
*/
for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
for (i = irq_start; i < irq_limit; i++) {
set_irq_chip(i, &gic_chip);
set_irq_chip_data(i, &gic_data[gic_nr]);
set_irq_handler(i, handle_level_irq);
......
arch/arm/configs/picotux200_defconfig → arch/arm/configs/at91rm9200_defconfig
浏览文件 @ 8bcee183
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_SLAB=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_ONEARM=y
CONFIG_ARCH_AT91RM9200DK=y
CONFIG_MACH_AT91RM9200EK=y
CONFIG_MACH_CSB337=y
CONFIG_MACH_CSB637=y
CONFIG_MACH_CARMEVA=y
CONFIG_MACH_ATEB9200=y
CONFIG_MACH_KB9200=y
CONFIG_MACH_PICOTUX2XX=y
CONFIG_MACH_KAFA=y
CONFIG_MACH_ECBAT91=y
CONFIG_MACH_YL9200=y
CONFIG_MACH_CPUAT91=y
CONFIG_MACH_ECO920=y
CONFIG_MTD_AT91_DATAFLASH_CARD=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_AT91_TIMER_HZ=100
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x10000000
CONFIG_ZBOOT_ROM_BSS=0x20040000
CONFIG_KEXEC=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_MISC=m
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=m
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
......@@ -34,7 +63,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
......@@ -55,26 +83,50 @@ CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_FW_LOADER=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_TCLIB=y
CONFIG_EEPROM_LEGACY=m
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_TUN=m
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_MICREL_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
......@@ -83,34 +135,40 @@ CONFIG_USB_USBNET=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_PPP=m
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_GPIO=m
CONFIG_LEGACY_PTY_COUNT=32
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_SPI=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_BITBANG=y
CONFIG_GPIO_SYSFS=y
CONFIG_HWMON=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
......@@ -123,6 +181,7 @@ CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
......@@ -142,42 +201,100 @@ CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=m
CONFIG_HID=m
CONFIG_USB=m
CONFIG_AT91RM9200_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_S1D13XXX=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_DISPLAY_SUPPORT=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_MINI_4x6=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_SERIAL=m
CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_PL2303=m
CONFIG_MMC=m
CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=m
CONFIG_RTC_DRV_AT91RM9200=m
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
CONFIG_MMC_AT91=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_INOTIFY=y
CONFIG_ISO9660_FS=m
CONFIG_REISERFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=m
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_NFS_FS=m
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RUBIN=y
CONFIG_CRAMFS=y
CONFIG_MINIX_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_AMIGA_PARTITION=y
CONFIG_NLS_DEFAULT="utf-8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_MAC_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
......@@ -201,7 +318,7 @@ CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
......@@ -214,29 +331,11 @@ CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_LL=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_LIBCRC32C=m
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_SHA1=y
arch/arm/configs/at91rm9200dk_defconfig 已删除 100644 → 0
浏览文件 @ 5ce2a2dd
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200DK=y
CONFIG_MACH_ECO920=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_LEDS=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
arch/arm/configs/at91rm9200ek_defconfig 已删除 100644 → 0
浏览文件 @ 5ce2a2dd
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_AT91RM9200EK=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_S1D13XXX=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
arch/arm/configs/ateb9200_defconfig 已删除 100644 → 0
浏览文件 @ 5ce2a2dd
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_AT91=y
CONFIG_MACH_ATEB9200=y
CONFIG_PCCARD=m
CONFIG_AT91_CF=m
CONFIG_PREEMPT=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK_RO=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_MULTI_LUN=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_TUN=m
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_PPP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_GPIO=m
# CONFIG_VGA_CONSOLE is not set
CONFIG_SOUND=y
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_GADGET=m
CONFIG_USB_ETH=m
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=m
CONFIG_REISERFS_FS=m
CONFIG_INOTIFY=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
CONFIG_NTFS_RW=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V4=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRC16=m
CONFIG_LIBCRC32C=m
arch/arm/configs/carmeva_defconfig 已删除 100644 → 0
浏览文件 @ 5ce2a2dd
CONFIG_EXPERIMENTAL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
# CONFIG_HOTPLUG is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_ARCH_AT91=y
CONFIG_MACH_CARMEVA=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_SERIO=m
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_MMC=m
CONFIG_MMC_DEBUG=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_DNOTIFY is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
arch/arm/configs/cpuat91_defconfig 已删除 100644 → 0
浏览文件 @ 5ce2a2dd
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_CPUAT91=y
CONFIG_AT91_TIMER_HZ=100
# CONFIG_ARM_THUMB is not set
CONFIG_PREEMPT=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PLATRAM=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_PHYLIB=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_PPP=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=32
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_INOTIFY=y
CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_CRAMFS=y
CONFIG_MINIX_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
arch/arm/configs/csb337_defconfig 已删除 100644 → 0
浏览文件 @ 5ce2a2dd
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_CSB337=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
arch/arm/configs/csb637_defconfig 已删除 100644 → 0
浏览文件 @ 5ce2a2dd
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_CSB637=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_MCT_U232=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
arch/arm/configs/ecbat91_defconfig 已删除 100644 → 0
浏览文件 @ 5ce2a2dd
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_ECBAT91=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_PREEMPT=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IPV6 is not set
CONFIG_CFG80211=y
CONFIG_MAC80211=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_SPI_BITBANG=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
# CONFIG_VGA_CONSOLE is not set
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_AT91=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_REISERFS_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_DEBUG_USER=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_SHA1=y
arch/arm/configs/kafa_defconfig 已删除 100644 → 0
浏览文件 @ 5ce2a2dd
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_KAFA=y
# CONFIG_ARM_THUMB is not set
CONFIG_PREEMPT=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK_RO=y
CONFIG_NETDEVICES=y
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=32
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
arch/arm/configs/kb9202_defconfig 已删除 100644 → 0
浏览文件 @ 5ce2a2dd
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_AUDIT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_KB9200=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x10000000
CONFIG_ZBOOT_ROM_BSS=0x20040000
CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
CONFIG_KEXEC=y
CONFIG_FPE_NWFPE=y
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_SSC=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_AT91RM9200_WATCHDOG=y
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_MINI_4x6=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
CONFIG_MMC=y
CONFIG_MMC_AT91=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
arch/arm/configs/onearm_defconfig 已删除 100644 → 0
浏览文件 @ 5ce2a2dd
CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_MACH_ONEARM=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_AT91_CF=y
CONFIG_LEDS=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IPV6=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_IPV6_SIT is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_AT91RM9200_WATCHDOG=y
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_MMC=y
CONFIG_EXT2_FS=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_ROOT_NFS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
arch/arm/configs/yl9200_defconfig 已删除 100644 → 0
浏览文件 @ 5ce2a2dd
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200DK=y
CONFIG_MACH_YL9200=y
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=3
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_MISC_DEVICES is not set
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_NETDEVICES=y
CONFIG_PHYLIB=y
CONFIG_DAVICOM_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_ARM_AT91_ETHER=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_SPI=y
CONFIG_SPI_DEBUG=y
CONFIG_SPI_ATMEL=y
CONFIG_FB=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_DISPLAY_SUPPORT=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_FILE_STORAGE=m
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_AT91=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
CONFIG_REISERFS_FS=y
CONFIG_INOTIFY=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=1
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_RUBIN=y
CONFIG_CRAMFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_SLUB_DEBUG_ON=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
arch/arm/kernel/entry-armv.S
浏览文件 @ 8bcee183
......@@ -911,7 +911,7 @@ __kuser_cmpxchg: @ 0xffff0fc0
* A special ghost syscall is used for that (see traps.c).
*/
stmfd sp!, {r7, lr}
ldr r7, =1f @ it's 20 bits
ldr r7, 1f @ it's 20 bits
swi __ARM_NR_cmpxchg
ldmfd sp!, {r7, pc}
1: .word __ARM_NR_cmpxchg
......
arch/arm/kernel/head.S
浏览文件 @ 8bcee183
......@@ -85,9 +85,11 @@ ENTRY(stext)
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p @ yes, error 'p'
bl __lookup_machine_type @ r5=machinfo
movs r8, r5 @ invalid machine (r5=0)?
THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_a @ yes, error 'a'
bl __vet_atags
#ifdef CONFIG_SMP_ON_UP
......@@ -262,6 +264,7 @@ __create_page_tables:
mov pc, lr
ENDPROC(__create_page_tables)
.ltorg
.align
__enable_mmu_loc:
.long .
.long __enable_mmu
......@@ -282,6 +285,7 @@ ENTRY(secondary_startup)
bl __lookup_processor_type
movs r10, r5 @ invalid processor?
moveq r0, #'p' @ yes, error 'p'
THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p
/*
......@@ -308,6 +312,8 @@ ENTRY(__secondary_switched)
b secondary_start_kernel
ENDPROC(__secondary_switched)
.align
.type __secondary_data, %object
__secondary_data:
.long .
......@@ -413,6 +419,7 @@ __fixup_smp_on_up:
mov pc, lr
ENDPROC(__fixup_smp)
.align
1: .word .
.word __smpalt_begin
.word __smpalt_end
......
arch/arm/kernel/relocate_kernel.S
浏览文件 @ 8bcee183
......@@ -59,6 +59,8 @@ relocate_new_kernel:
ldr r2,kexec_boot_atags
mov pc,lr
.align
.globl kexec_start_address
kexec_start_address:
.long 0x0
......
arch/arm/mach-at91/Makefile
浏览文件 @ 8bcee183
......@@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
obj-$(CONFIG_ARCH_AT91RM9200DK) += board-rm9200dk.o
obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o
obj-$(CONFIG_MACH_CSB337) += board-csb337.o
obj-$(CONFIG_MACH_CSB637) += board-csb637.o
obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
......
arch/arm/mach-at91/at91rm9200_devices.c
浏览文件 @ 8bcee183
......@@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins)
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
/* Fill in list of supported UARTs */
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91rm9200_uart0_device;
at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
break;
case 1:
configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
at91_uarts[i] = &at91rm9200_uart1_device;
at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
break;
case 2:
configure_usart2_pins(0);
at91_uarts[i] = &at91rm9200_uart2_device;
at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
break;
case 3:
configure_usart3_pins(0);
at91_uarts[i] = &at91rm9200_uart3_device;
at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
break;
case 4:
configure_dbgu_pins();
at91_uarts[i] = &at91rm9200_dbgu_device;
at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
break;
default:
continue;
}
at91_uarts[i]->id = i; /* update ID number to mapped ID */
}
/* Set serial console device */
if (config->console_tty < ATMEL_MAX_UART)
atmel_default_console_device = at91_uarts[config->console_tty];
if (!atmel_default_console_device)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
......
arch/arm/mach-at91/board-1arm.c
浏览文件 @ 8bcee183
......@@ -39,24 +39,24 @@
#include "generic.h"
/*
* Serial port configuration.
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
static struct at91_uart_config __initdata onearm_uart_config = {
.console_tty = 0, /* ttyS0 */
.nr_tty = 3,
.tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */
};
static void __init onearm_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_PQFP);
/* Setup the serial ports and console */
at91_init_serial(&onearm_uart_config);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
static void __init onearm_init_irq(void)
......
arch/arm/mach-at91/board-kafa.c
浏览文件 @ 8bcee183
......@@ -39,17 +39,6 @@
#include "generic.h"
/*
* Serial port configuration.
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
static struct at91_uart_config __initdata kafa_uart_config = {
.console_tty = 0, /* ttyS0 */
.nr_tty = 2,
.tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
};
static void __init kafa_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
......@@ -58,8 +47,14 @@ static void __init kafa_map_io(void)
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
/* Setup the serial ports and console */
at91_init_serial(&kafa_uart_config);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
static void __init kafa_init_irq(void)
......
arch/arm/mach-at91/board-picotux200.c
浏览文件 @ 8bcee183
......@@ -43,24 +43,21 @@
#include "generic.h"
/*
* Serial port configuration.
* 0 .. 3 = USART0 .. USART3
* 4 = DBGU
*/
static struct at91_uart_config __initdata picotux200_uart_config = {
.console_tty = 0, /* ttyS0 */
.nr_tty = 2,
.tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
};
static void __init picotux200_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_BGA);
/* Setup the serial ports and console */
at91_init_serial(&picotux200_uart_config);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
| ATMEL_UART_RI);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
static void __init picotux200_init_irq(void)
......@@ -77,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
.ports = 1,
};
// static struct at91_udc_data __initdata picotux200_udc_data = {
// .vbus_pin = AT91_PIN_PD4,
// .pullup_pin = AT91_PIN_PD5,
// };
static struct at91_mmc_data __initdata picotux200_mmc_data = {
.det_pin = AT91_PIN_PB27,
.slot_b = 0,
......@@ -89,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
.wp_pin = AT91_PIN_PA17,
};
// static struct spi_board_info picotux200_spi_devices[] = {
// { /* DataFlash chip */
// .modalias = "mtd_dataflash",
// .chip_select = 0,
// .max_speed_hz = 15 * 1000 * 1000,
// },
// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
// { /* DataFlash card */
// .modalias = "mtd_dataflash",
// .chip_select = 3,
// .max_speed_hz = 15 * 1000 * 1000,
// },
// #endif
// };
#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
#define PICOTUX200_FLASH_SIZE SZ_4M
......@@ -135,21 +112,11 @@ static void __init picotux200_board_init(void)
at91_add_device_eth(&picotux200_eth_data);
/* USB Host */
at91_add_device_usbh(&picotux200_usbh_data);
/* USB Device */
// at91_add_device_udc(&picotux200_udc_data);
// at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
/* I2C */
at91_add_device_i2c(NULL, 0);
/* SPI */
// at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
/* DataFlash card */
at91_set_gpio_output(AT91_PIN_PB22, 0);
#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(0, &picotux200_mmc_data);
#endif
/* NOR Flash */
platform_device_register(&picotux200_flash);
}
......
arch/arm/mach-at91/board-dk.c → arch/arm/mach-at91/board-rm9200dk.c
浏览文件 @ 8bcee183
/*
* linux/arch/arm/mach-at91/board-dk.c
* linux/arch/arm/mach-at91/board-rm9200dk.c
*
* Copyright (C) 2005 SAN People
*
......@@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = {
// .vcc_pin = ... always powered
};
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
static struct at91_mmc_data __initdata dk_mmc_data = {
.slot_b = 0,
.wire4 = 1,
};
#endif
static struct spi_board_info dk_spi_devices[] = {
{ /* DataFlash chip */
......
arch/arm/mach-at91/board-ek.c → arch/arm/mach-at91/board-rm9200ek.c
浏览文件 @ 8bcee183
/*
* linux/arch/arm/mach-at91/board-ek.c
* linux/arch/arm/mach-at91/board-rm9200ek.c
*
* Copyright (C) 2005 SAN People
*
......@@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = {
.pullup_pin = AT91_PIN_PD5,
};
#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
static struct at91_mmc_data __initdata ek_mmc_data = {
.det_pin = AT91_PIN_PB27,
.slot_b = 0,
.wire4 = 1,
.wp_pin = AT91_PIN_PA17,
};
#endif
static struct spi_board_info ek_spi_devices[] = {
{ /* DataFlash chip */
......
arch/arm/mach-at91/board-yl-9200.c
浏览文件 @ 8bcee183
......@@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = {
* EPSON S1D13806 FB (discontinued chip)
* EPSON S1D13506 FB
*/
#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
#include <video/s1d13xxxfb.h>
......
arch/arm/mach-at91/include/mach/board.h
浏览文件 @ 8bcee183
......@@ -137,13 +137,7 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de
extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
extern void __init at91_set_serial_console(unsigned portnr);
struct at91_uart_config {
unsigned short console_tty; /* tty number of serial console */
unsigned short nr_tty; /* number of serial tty's */
short tty_map[]; /* map UART to tty number */
};
extern struct platform_device *atmel_default_console_device;
extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
struct atmel_uart_data {
short use_dma_tx; /* use transmit DMA? */
......
arch/arm/mach-cns3xxx/pcie.c
浏览文件 @ 8bcee183
......@@ -369,7 +369,7 @@ static int __init cns3xxx_pcie_init(void)
{
int i;
hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS,
hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
"imprecise external abort");
for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
......
arch/arm/mach-mmp/mmp2.c
浏览文件 @ 8bcee183
......@@ -126,7 +126,6 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
static APMU_CLK(nand, NAND, 0xbf, 100000000);
......
arch/arm/mach-omap2/board-zoom-peripherals.c
浏览文件 @ 8bcee183
......@@ -216,7 +216,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{
.name = "wl1271",
.mmc = 3,
.caps = MMC_CAP_4_BIT_DATA,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
.nonremovable = true,
......
arch/arm/mach-omap2/io.c
浏览文件 @ 8bcee183
......@@ -297,7 +297,7 @@ static int __init _omap2_init_reprogram_sdrc(void)
return 0;
dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
if (!dpll3_m2_ck)
if (IS_ERR(dpll3_m2_ck))
return -EINVAL;
rate = clk_get_rate(dpll3_m2_ck);
......
arch/arm/mach-omap2/pm-debug.c
浏览文件 @ 8bcee183
......@@ -161,6 +161,23 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
}
void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
{
u32 tick_rate, cycles;
if (!seconds && !milliseconds)
return;
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
omap_dm_timer_stop(gptimer_wakeup);
omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
pr_info("PM: Resume timer in %u.%03u secs"
" (%d ticks at %d ticks/sec.)\n",
seconds, milliseconds, cycles, tick_rate);
}
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
......@@ -354,23 +371,6 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
pwrdm->timer = t;
}
void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
{
u32 tick_rate, cycles;
if (!seconds && !milliseconds)
return;
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
omap_dm_timer_stop(gptimer_wakeup);
omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
pr_info("PM: Resume timer in %u.%03u secs"
" (%d ticks at %d ticks/sec.)\n",
seconds, milliseconds, cycles, tick_rate);
}
static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
{
struct seq_file *s = (struct seq_file *)user;
......
arch/arm/mach-omap2/pm24xx.c
浏览文件 @ 8bcee183
......@@ -30,6 +30,7 @@
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/gpio.h>
#include <linux/console.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
......@@ -52,6 +53,19 @@
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
{
return (suspend_state != PM_SUSPEND_ON);
}
#else
static inline bool is_suspending(void)
{
return false;
}
#endif
static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
......@@ -118,6 +132,11 @@ static void omap2_enter_full_retention(void)
if (omap_irq_pending())
goto no_sleep;
/* Block console output in case it is on one of the OMAP UARTs */
if (!is_suspending())
if (try_acquire_console_sem())
goto no_sleep;
omap_uart_prepare_idle(0);
omap_uart_prepare_idle(1);
omap_uart_prepare_idle(2);
......@@ -131,6 +150,9 @@ static void omap2_enter_full_retention(void)
omap_uart_resume_idle(1);
omap_uart_resume_idle(0);
if (!is_suspending())
release_console_sem();
no_sleep:
if (omap2_pm_debug) {
unsigned long long tmp;
......@@ -277,6 +299,12 @@ static void omap2_pm_idle(void)
local_irq_enable();
}
static int omap2_pm_begin(suspend_state_t state)
{
suspend_state = state;
return 0;
}
static int omap2_pm_prepare(void)
{
/* We cannot sleep in idle until we have resumed */
......@@ -326,10 +354,17 @@ static void omap2_pm_finish(void)
enable_hlt();
}
static void omap2_pm_end(void)
{
suspend_state = PM_SUSPEND_ON;
}
static struct platform_suspend_ops omap_pm_ops = {
.begin = omap2_pm_begin,
.prepare = omap2_pm_prepare,
.enter = omap2_pm_enter,
.finish = omap2_pm_finish,
.end = omap2_pm_end,
.valid = suspend_valid_only_mem,
};
......
arch/arm/mach-omap2/pm34xx.c
浏览文件 @ 8bcee183
......@@ -28,6 +28,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/console.h>
#include <plat/sram.h>
#include <plat/clockdomain.h>
......@@ -49,6 +50,19 @@
#include "sdrc.h"
#include "control.h"
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
{
return (suspend_state != PM_SUSPEND_ON);
}
#else
static inline bool is_suspending(void)
{
return false;
}
#endif
/* Scratchpad offsets */
#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4
#define OMAP343X_TABLE_VALUE_OFFSET 0xc0
......@@ -385,6 +399,13 @@ void omap_sram_idle(void)
omap3_enable_io_chain();
}
/* Block console output in case it is on one of the OMAP UARTs */
if (!is_suspending())
if (per_next_state < PWRDM_POWER_ON ||
core_next_state < PWRDM_POWER_ON)
if (try_acquire_console_sem())
goto console_still_active;
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
omap_uart_prepare_idle(2);
......@@ -463,6 +484,10 @@ void omap_sram_idle(void)
omap_uart_resume_idle(3);
}
if (!is_suspending())
release_console_sem();
console_still_active:
/* Disable IO-PAD and IO-CHAIN wakeup */
if (omap3_has_io_wakeup() &&
(per_next_state < PWRDM_POWER_ON ||
......@@ -504,8 +529,6 @@ static void omap3_pm_idle(void)
}
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state;
static int omap3_pm_prepare(void)
{
disable_hlt();
......
arch/arm/mach-omap2/prcm-common.h
浏览文件 @ 8bcee183
......@@ -243,13 +243,14 @@
#define OMAP24XX_EN_GPT1_MASK (1 << 0)
/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
#define OMAP24XX_ST_GPIOS_SHIFT (1 << 2)
#define OMAP24XX_ST_GPIOS_MASK 2
#define OMAP24XX_ST_GPT1_SHIFT (1 << 0)
#define OMAP24XX_ST_GPT1_MASK 0
#define OMAP24XX_ST_GPIOS_SHIFT 2
#define OMAP24XX_ST_GPIOS_MASK (1 << 2)
#define OMAP24XX_ST_GPT1_SHIFT 0
#define OMAP24XX_ST_GPT1_MASK (1 << 0)
/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
#define OMAP2430_ST_MDM_SHIFT (1 << 0)
#define OMAP2430_ST_MDM_SHIFT 0
#define OMAP2430_ST_MDM_MASK (1 << 0)
/* 3430 register bits shared between CM & PRM registers */
......
arch/arm/mach-omap2/serial.c
浏览文件 @ 8bcee183
......@@ -27,6 +27,7 @@
#include <linux/slab.h>
#include <linux/serial_8250.h>
#include <linux/pm_runtime.h>
#include <linux/console.h>
#ifdef CONFIG_SERIAL_OMAP
#include <plat/omap-serial.h>
......@@ -406,7 +407,7 @@ void omap_uart_resume_idle(int num)
struct omap_uart_state *uart;
list_for_each_entry(uart, &uart_list, node) {
if (num == uart->num) {
if (num == uart->num && uart->can_sleep) {
omap_uart_enable_clocks(uart);
/* Check for IO pad wakeup */
......@@ -807,6 +808,8 @@ void __init omap_serial_init_port(int port)
oh->dev_attr = uart;
acquire_console_sem(); /* in case the earlycon is on the UART */
/*
* Because of early UART probing, UART did not get idled
* on init. Now that omap_device is ready, ensure full idle
......@@ -831,6 +834,8 @@ void __init omap_serial_init_port(int port)
omap_uart_block_sleep(uart);
uart->timeout = DEFAULT_TIMEOUT;
release_console_sem();
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
device_init_wakeup(&od->pdev.dev, true);
......
arch/arm/mach-pxa/palmtx.c
浏览文件 @ 8bcee183
......@@ -241,7 +241,8 @@ static inline void palmtx_keys_init(void) {}
/******************************************************************************
* NAND Flash
******************************************************************************/
#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
#if defined(CONFIG_MTD_NAND_PLATFORM) || \
defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
......
arch/arm/mach-realview/headsmp.S
浏览文件 @ 8bcee183
......@@ -35,5 +35,6 @@ pen: ldr r7, [r6]
*/
b secondary_startup
.align
1: .long .
.long pen_release
arch/arm/mach-s3c2410/h1940-bluetooth.c
浏览文件 @ 8bcee183
......@@ -77,13 +77,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
/* Configures BT serial port GPIOs */
s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
......
arch/arm/mach-s3c2412/Kconfig
浏览文件 @ 8bcee183
......@@ -16,7 +16,7 @@ config CPU_S3C2412
config CPU_S3C2412_ONLY
bool
depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
!CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
!CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
!CPU_S3C2443 && CPU_S3C2412
default y if CPU_S3C2412
......
arch/arm/mach-s3c2416/Kconfig
浏览文件 @ 8bcee183
......@@ -35,9 +35,12 @@ menu "S3C2416 Machines"
config MACH_SMDK2416
bool "SMDK2416"
select CPU_S3C2416
select MACH_SMDK
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
select S3C2416_PM if PM
help
Say Y here if you are using an SMDK2416
......
arch/arm/mach-s3c2416/irq.c
浏览文件 @ 8bcee183
......@@ -168,12 +168,11 @@ static struct irq_chip s3c2416_irq_dma = {
static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
{
s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
}
#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
static void s3c2416_irq_uart3_mask(unsigned int irqno)
{
......
arch/arm/mach-s3c2440/Kconfig
浏览文件 @ 8bcee183
......@@ -18,6 +18,7 @@ config CPU_S3C2440
config CPU_S3C2442
bool
select CPU_ARM920T
select S3C_GPIO_PULL_DOWN
select S3C2410_CLOCK
select S3C2410_GPIO
select S3C2410_PM if PM
......@@ -178,6 +179,9 @@ config MACH_MINI2440
bool "MINI2440 development board"
select CPU_S3C2440
select EEPROM_AT24
select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGER
select LEDS_TRIGGER_BACKLIGHT
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
......
arch/arm/mach-s3c2440/s3c2440.c
浏览文件 @ 8bcee183
......@@ -46,9 +46,6 @@ int __init s3c2440_init(void)
{
printk("S3C2440: Initialising architecture\n");
s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
/* change irq for watchdog */
s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
......@@ -58,3 +55,11 @@ int __init s3c2440_init(void)
return sysdev_register(&s3c2440_sysdev);
}
void __init s3c2440_map_io(void)
{
s3c244x_map_io();
s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
}
arch/arm/mach-s3c2440/s3c2442.c
浏览文件 @ 8bcee183
......@@ -32,6 +32,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/mutex.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/io.h>
......@@ -43,6 +44,11 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/s3c244x.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
/* S3C2442 extended clock support */
......@@ -163,3 +169,11 @@ int __init s3c2442_init(void)
return sysdev_register(&s3c2442_sysdev);
}
void __init s3c2442_map_io(void)
{
s3c244x_map_io();
s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
}
arch/arm/mach-s3c2443/Kconfig
浏览文件 @ 8bcee183
......@@ -5,6 +5,7 @@
config CPU_S3C2443
bool
depends on ARCH_S3C2410
select CPU_ARM920T
select S3C2443_DMA if S3C2410_DMA
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
......
arch/arm/mach-s3c2443/irq.c
浏览文件 @ 8bcee183
......@@ -166,12 +166,11 @@ static struct irq_chip s3c2443_irq_dma = {
static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
{
s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
}
#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
#define SUBMSK_UART3 (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
static void s3c2443_irq_uart3_mask(unsigned int irqno)
{
......
arch/arm/mach-s3c64xx/mach-mini6410.c
浏览文件 @ 8bcee183
......@@ -45,7 +45,7 @@
#include <video/platform_lcd.h>
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
......
arch/arm/mach-s3c64xx/mach-real6410.c
浏览文件 @ 8bcee183
......@@ -46,7 +46,7 @@
#include <video/platform_lcd.h>
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
......
arch/arm/mach-s5pv210/mach-smdkc110.c
浏览文件 @ 8bcee183
......@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/i2c.h>
#include <linux/sysdev.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......
arch/arm/mach-s5pv210/mach-smdkv210.c
浏览文件 @ 8bcee183
......@@ -13,6 +13,7 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/sysdev.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......
arch/arm/mach-shmobile/clock-sh7372.c
浏览文件 @ 8bcee183
......@@ -628,8 +628,8 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */
CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */
......
arch/arm/mach-shmobile/include/mach/entry-macro-intc.S
浏览文件 @ 8bcee183
/*
* Copyright (C) 2010 Magnus Damm
* Copyright (C) 2008 Renesas Solutions Corp.
*
* This program is free software; you can redistribute it and/or modify
......@@ -14,24 +15,45 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <mach/hardware.h>
#include <mach/irqs.h>
#define INTCA_BASE 0xe6980000
#define INTFLGA_OFFS 0x00000018 /* accept pending interrupt */
#define INTEVTA_OFFS 0x00000020 /* vector number of accepted interrupt */
#define INTLVLA_OFFS 0x00000030 /* priority level of accepted interrupt */
#define INTLVLB_OFFS 0x00000034 /* previous priority level */
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =INTFLGA
ldr \base, =INTCA_BASE
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base]
/* The single INTFLGA read access below results in the following:
*
* 1. INTLVLB is updated with old priority value from INTLVLA
* 2. Highest priority interrupt is accepted
* 3. INTLVLA is updated to contain priority of accepted interrupt
* 4. Accepted interrupt vector is stored in INTFLGA and INTEVTA
*/
ldr \irqnr, [\base, #INTFLGA_OFFS]
/* Restore INTLVLA with the value saved in INTLVLB.
* This is required to support interrupt priorities properly.
*/
ldrb \tmp, [\base, #INTLVLB_OFFS]
strb \tmp, [\base, #INTLVLA_OFFS]
/* Handle invalid vector number case */
cmp \irqnr, #0
beq 1000f
/* intevt to irq number */
/* Convert vector to irq number, same as the evt2irq() macro */
lsr \irqnr, \irqnr, #0x5
subs \irqnr, \irqnr, #16
......
arch/arm/mach-shmobile/include/mach/vmalloc.h
浏览文件 @ 8bcee183
......@@ -2,6 +2,6 @@
#define __ASM_MACH_VMALLOC_H
/* Vmalloc at ... - 0xe5ffffff */
#define VMALLOC_END 0xe6000000
#define VMALLOC_END 0xe6000000UL
#endif /* __ASM_MACH_VMALLOC_H */
arch/arm/mach-tegra/include/mach/debug-macro.S
浏览文件 @ 8bcee183
......@@ -21,8 +21,8 @@
#include <mach/io.h>
.macro addruart, rp, rv
ldreq \rp, =IO_APB_PHYS @ physical
ldrne \rv, =IO_APB_VIRT @ virtual
ldr \rp, =IO_APB_PHYS @ physical
ldr \rv, =IO_APB_VIRT @ virtual
#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
#error "A debug UART must be selected in the kernel config to use DEBUG_LL"
#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
......
arch/arm/mach-vexpress/headsmp.S
浏览文件 @ 8bcee183
......@@ -35,5 +35,6 @@ pen: ldr r7, [r6]
*/
b secondary_startup
.align
1: .long .
.long pen_release
arch/arm/mm/cache-v6.S
浏览文件 @ 8bcee183
......@@ -203,6 +203,10 @@ ENTRY(v6_flush_kern_dcache_area)
* - end - virtual end address of region
*/
v6_dma_inv_range:
#ifdef CONFIG_DMA_CACHE_RWFO
ldrb r2, [r0] @ read for ownership
strb r2, [r0] @ write for ownership
#endif
tst r0, #D_CACHE_LINE_SIZE - 1
bic r0, r0, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
......@@ -211,6 +215,10 @@ v6_dma_inv_range:
mcrne p15, 0, r0, c7, c11, 1 @ clean unified line
#endif
tst r1, #D_CACHE_LINE_SIZE - 1
#ifdef CONFIG_DMA_CACHE_RWFO
ldrneb r2, [r1, #-1] @ read for ownership
strneb r2, [r1, #-1] @ write for ownership
#endif
bic r1, r1, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D line
......@@ -218,10 +226,6 @@ v6_dma_inv_range:
mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line
#endif
1:
#ifdef CONFIG_DMA_CACHE_RWFO
ldr r2, [r0] @ read for ownership
str r2, [r0] @ write for ownership
#endif
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c6, 1 @ invalidate D line
#else
......@@ -229,6 +233,10 @@ v6_dma_inv_range:
#endif
add r0, r0, #D_CACHE_LINE_SIZE
cmp r0, r1
#ifdef CONFIG_DMA_CACHE_RWFO
ldrlo r2, [r0] @ read for ownership
strlo r2, [r0] @ write for ownership
#endif
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
......@@ -263,12 +271,12 @@ v6_dma_clean_range:
* - end - virtual end address of region
*/
ENTRY(v6_dma_flush_range)
bic r0, r0, #D_CACHE_LINE_SIZE - 1
1:
#ifdef CONFIG_DMA_CACHE_RWFO
ldr r2, [r0] @ read for ownership
str r2, [r0] @ write for ownership
ldrb r2, [r0] @ read for ownership
strb r2, [r0] @ write for ownership
#endif
bic r0, r0, #D_CACHE_LINE_SIZE - 1
1:
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line
#else
......@@ -276,6 +284,10 @@ ENTRY(v6_dma_flush_range)
#endif
add r0, r0, #D_CACHE_LINE_SIZE
cmp r0, r1
#ifdef CONFIG_DMA_CACHE_RWFO
ldrlob r2, [r0] @ read for ownership
strlob r2, [r0] @ write for ownership
#endif
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
......
arch/arm/mm/cache-v7.S
浏览文件 @ 8bcee183
......@@ -173,15 +173,22 @@ ENTRY(v7_coherent_user_range)
UNWIND(.fnstart )
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
bic r12, r0, r3
1:
USER( mcr p15, 0, r0, c7, c11, 1 ) @ clean D line to the point of unification
USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification
add r12, r12, r2
cmp r12, r1
blo 1b
dsb
USER( mcr p15, 0, r0, c7, c5, 1 ) @ invalidate I line
add r0, r0, r2
icache_line_size r2, r3
sub r3, r2, #1
bic r12, r0, r3
2:
cmp r0, r1
blo 1b
USER( mcr p15, 0, r12, c7, c5, 1 ) @ invalidate I line
add r12, r12, r2
cmp r12, r1
blo 2b
3:
mov r0, #0
ALT_SMP(mcr p15, 0, r0, c7, c1, 6) @ invalidate BTB Inner Shareable
ALT_UP(mcr p15, 0, r0, c7, c5, 6) @ invalidate BTB
......@@ -194,10 +201,10 @@ ENTRY(v7_coherent_user_range)
* isn't mapped, just try the next page.
*/
9001:
mov r0, r0, lsr #12
mov r0, r0, lsl #12
add r0, r0, #4096
b 2b
mov r12, r12, lsr #12
mov r12, r12, lsl #12
add r12, r12, #4096
b 3b
UNWIND(.fnend )
ENDPROC(v7_coherent_kern_range)
ENDPROC(v7_coherent_user_range)
......
arch/arm/mm/proc-macros.S
浏览文件 @ 8bcee183
......@@ -61,17 +61,27 @@
.endm
/*
* cache_line_size - get the cache line size from the CSIDR register
* (available on ARMv7+). It assumes that the CSSR register was configured
* to access the L1 data cache CSIDR.
* dcache_line_size - get the minimum D-cache line size from the CTR register
* on ARMv7.
*/
.macro dcache_line_size, reg, tmp
mrc p15, 1, \tmp, c0, c0, 0 @ read CSIDR
and \tmp, \tmp, #7 @ cache line size encoding
mov \reg, #16 @ size offset
mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
lsr \tmp, \tmp, #16
and \tmp, \tmp, #0xf @ cache line size encoding
mov \reg, #4 @ bytes per word
mov \reg, \reg, lsl \tmp @ actual cache line size
.endm
/*
* icache_line_size - get the minimum I-cache line size from the CTR register
* on ARMv7.
*/
.macro icache_line_size, reg, tmp
mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
and \tmp, \tmp, #0xf @ cache line size encoding
mov \reg, #4 @ bytes per word
mov \reg, \reg, lsl \tmp @ actual cache line size
.endm
/*
* Sanity check the PTE configuration for the code below - which makes
......
arch/arm/mm/proc-v7.S
浏览文件 @ 8bcee183
......@@ -381,7 +381,7 @@ __v7_ca9mp_proc_info:
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __v7_ca9mp_setup
W(b) __v7_ca9mp_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
......@@ -413,7 +413,7 @@ __v7_proc_info:
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __v7_setup
W(b) __v7_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
......
arch/arm/plat-iop/time.c
浏览文件 @ 8bcee183
......@@ -18,6 +18,7 @@
#include <linux/time.h>
#include <linux/init.h>
#include <linux/timex.h>
#include <linux/sched.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
......@@ -36,7 +37,7 @@
/*
* IOP clocksource (free-running timer 1).
*/
static cycle_t iop_clocksource_read(struct clocksource *unused)
static cycle_t notrace iop_clocksource_read(struct clocksource *unused)
{
return 0xffffffffu - read_tcr1();
}
......
arch/arm/plat-omap/counter_32k.c
浏览文件 @ 8bcee183
......@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/err.h>
#include <plat/common.h>
#include <plat/board.h>
......@@ -164,7 +165,7 @@ static int __init omap_init_clocksource_32k(void)
return -ENODEV;
sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
if (sync_32k_ick)
if (!IS_ERR(sync_32k_ick))
clk_enable(sync_32k_ick);
clocksource_32k.mult = clocksource_hz2mult(32768,
......
arch/arm/plat-omap/sram.c
浏览文件 @ 8bcee183
......@@ -166,7 +166,7 @@ static void __init omap_detect_sram(void)
cpu_is_omap1710())
omap_sram_size = 0x4000; /* 16K */
else if (cpu_is_omap1611())
omap_sram_size = 0x3e800; /* 250K */
omap_sram_size = SZ_256K;
else {
printk(KERN_ERR "Could not detect SRAM size\n");
omap_sram_size = 0x4000;
......
arch/arm/plat-pxa/include/plat/sdhci.h
浏览文件 @ 8bcee183
......@@ -17,6 +17,9 @@
/* Require clock free running */
#define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0)
/* Board design supports 8-bit data on SD/SDIO BUS */
#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2)
/*
* struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
* @max_speed: the maximum speed supported
......
arch/arm/plat-s3c24xx/cpu.c
浏览文件 @ 8bcee183
......@@ -88,7 +88,7 @@ static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = 0x32440000,
.idmask = 0xffffffff,
.map_io = s3c244x_map_io,
.map_io = s3c2440_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
......@@ -97,7 +97,7 @@ static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = 0x32440001,
.idmask = 0xffffffff,
.map_io = s3c244x_map_io,
.map_io = s3c2440_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
......@@ -106,7 +106,7 @@ static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = 0x32440aaa,
.idmask = 0xffffffff,
.map_io = s3c244x_map_io,
.map_io = s3c2442_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
......@@ -115,7 +115,7 @@ static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = 0x32440aab,
.idmask = 0xffffffff,
.map_io = s3c244x_map_io,
.map_io = s3c2442_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
......
arch/arm/plat-s3c24xx/gpiolib.c
浏览文件 @ 8bcee183
......@@ -82,8 +82,6 @@ static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
.set_config = s3c_gpio_setcfg_s3c24xx,
.get_config = s3c_gpio_getcfg_s3c24xx,
.set_pull = s3c_gpio_setpull_1up,
.get_pull = s3c_gpio_getpull_1up,
};
struct s3c_gpio_chip s3c24xx_gpios[] = {
......
arch/arm/plat-s3c24xx/include/plat/s3c244x.h
浏览文件 @ 8bcee183
......@@ -21,17 +21,22 @@ extern void s3c244x_init_clocks(int xtal);
#else
#define s3c244x_init_clocks NULL
#define s3c244x_init_uarts NULL
#define s3c244x_map_io NULL
#endif
#ifdef CONFIG_CPU_S3C2440
extern int s3c2440_init(void);
extern void s3c2440_map_io(void);
#else
#define s3c2440_init NULL
#define s3c2440_map_io NULL
#endif
#ifdef CONFIG_CPU_S3C2442
extern int s3c2442_init(void);
extern void s3c2442_map_io(void);
#else
#define s3c2442_init NULL
#define s3c2442_map_io NULL
#endif
arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
浏览文件 @ 8bcee183
......@@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
} else {
s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
}
}
arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
浏览文件 @ 8bcee183
......@@ -31,8 +31,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
} else {
s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
}
}
arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
浏览文件 @ 8bcee183
......@@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
} else {
s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
}
}
arch/arm/plat-samsung/gpio-config.c
浏览文件 @ 8bcee183
......@@ -280,18 +280,17 @@ s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
}
#endif
#ifdef CONFIG_S3C_GPIO_PULL_UP
int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
unsigned int off, s3c_gpio_pull_t pull)
#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)
static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip,
unsigned int off, s3c_gpio_pull_t pull,
s3c_gpio_pull_t updown)
{
void __iomem *reg = chip->base + 0x08;
u32 pup = __raw_readl(reg);
pup = __raw_readl(reg);
if (pup == S3C_GPIO_PULL_UP)
if (pull == updown)
pup &= ~(1 << off);
else if (pup == S3C_GPIO_PULL_NONE)
else if (pull == S3C_GPIO_PULL_NONE)
pup |= (1 << off);
else
return -EINVAL;
......@@ -300,17 +299,45 @@ int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
return 0;
}
s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
unsigned int off)
static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip,
unsigned int off, s3c_gpio_pull_t updown)
{
void __iomem *reg = chip->base + 0x08;
u32 pup = __raw_readl(reg);
pup &= (1 << off);
return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP;
return pup ? S3C_GPIO_PULL_NONE : updown;
}
#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */
#ifdef CONFIG_S3C_GPIO_PULL_UP
s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
unsigned int off)
{
return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
}
int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
unsigned int off, s3c_gpio_pull_t pull)
{
return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
}
#endif /* CONFIG_S3C_GPIO_PULL_UP */
#ifdef CONFIG_S3C_GPIO_PULL_DOWN
s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
unsigned int off)
{
return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
}
int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
unsigned int off, s3c_gpio_pull_t pull)
{
return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
}
#endif /* CONFIG_S3C_GPIO_PULL_DOWN */
#ifdef CONFIG_S5P_GPIO_DRVSTR
s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
{
......
arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
浏览文件 @ 8bcee183
......@@ -209,6 +209,17 @@ extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
unsigned int off);
/**
* s3c_gpio_getpull_1down() - Get configuration for choice of down or none
* @chip: The gpio chip that the GPIO pin belongs to
* @off: The offset to the pin to get the configuration of.
*
* This helper function reads the state of the pull-down resistor for the
* given GPIO in the same case as s3c_gpio_setpull_1down.
*/
extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
unsigned int off);
/**
* s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
* @chip: The gpio chip that is being configured.
......
arch/arm/tools/mach-types
浏览文件 @ 8bcee183
......@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
# Last update: Thu Sep 9 22:43:01 2010
# Last update: Sun Dec 12 23:24:27 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
......@@ -2321,7 +2321,7 @@ mx31txtr MACH_MX31TXTR MX31TXTR 2332
u380 MACH_U380 U380 2333
oamp3_hualu MACH_HUALU_BOARD HUALU_BOARD 2334
npcmx50 MACH_NPCMX50 NPCMX50 2335
mx51_lange51 MACH_MX51_LANGE51 MX51_LANGE51 2336
mx51_efikamx MACH_MX51_EFIKAMX MX51_EFIKAMX 2336
mx51_lange52 MACH_MX51_LANGE52 MX51_LANGE52 2337
riom MACH_RIOM RIOM 2338
comcas MACH_COMCAS COMCAS 2339
......@@ -2355,7 +2355,7 @@ at91sam9263cs MACH_AT91SAM9263CS AT91SAM9263CS 2366
csb732 MACH_CSB732 CSB732 2367
u8500 MACH_U8500 U8500 2368
huqiu MACH_HUQIU HUQIU 2369
mx51_kunlun MACH_MX51_KUNLUN MX51_KUNLUN 2370
mx51_efikasb MACH_MX51_EFIKASB MX51_EFIKASB 2370
pmt1g MACH_PMT1G PMT1G 2371
htcelf MACH_HTCELF HTCELF 2372
armadillo420 MACH_ARMADILLO420 ARMADILLO420 2373
......@@ -2971,7 +2971,7 @@ premierwave_en MACH_PREMIERWAVE_EN PREMIERWAVE_EN 2985
wasabi MACH_WASABI WASABI 2986
vivow MACH_VIVOW VIVOW 2987
mx50_rdp MACH_MX50_RDP MX50_RDP 2988
universal MACH_UNIVERSAL UNIVERSAL 2989
universal_c210 MACH_UNIVERSAL_C210 UNIVERSAL_C210 2989
real6410 MACH_REAL6410 REAL6410 2990
spx_sakura MACH_SPX_SAKURA SPX_SAKURA 2991
ij3k_2440 MACH_IJ3K_2440 IJ3K_2440 2992
......@@ -3044,3 +3044,178 @@ harvest_desoto MACH_HARVEST_DESOTO HARVEST_DESOTO 3059
msm8x60_qrdc MACH_MSM8X60_QRDC MSM8X60_QRDC 3060
spear900 MACH_SPEAR900 SPEAR900 3061
pcontrol_g20 MACH_PCONTROL_G20 PCONTROL_G20 3062
rdstor MACH_RDSTOR RDSTOR 3063
usdloader MACH_USDLOADER USDLOADER 3064
tsoploader MACH_TSOPLOADER TSOPLOADER 3065
kronos MACH_KRONOS KRONOS 3066
ffcore MACH_FFCORE FFCORE 3067
mone MACH_MONE MONE 3068
unit2s MACH_UNIT2S UNIT2S 3069
acer_a5 MACH_ACER_A5 ACER_A5 3070
etherpro_isp MACH_ETHERPRO_ISP ETHERPRO_ISP 3071
stretchs7000 MACH_STRETCHS7000 STRETCHS7000 3072
p87_smartsim MACH_P87_SMARTSIM P87_SMARTSIM 3073
tulip MACH_TULIP TULIP 3074
sunflower MACH_SUNFLOWER SUNFLOWER 3075
rib MACH_RIB RIB 3076
clod MACH_CLOD CLOD 3077
rump MACH_RUMP RUMP 3078
tenderloin MACH_TENDERLOIN TENDERLOIN 3079
shortloin MACH_SHORTLOIN SHORTLOIN 3080
crespo MACH_CRESPO CRESPO 3081
antares MACH_ANTARES ANTARES 3082
wb40n MACH_WB40N WB40N 3083
herring MACH_HERRING HERRING 3084
naxy400 MACH_NAXY400 NAXY400 3085
naxy1200 MACH_NAXY1200 NAXY1200 3086
vpr200 MACH_VPR200 VPR200 3087
bug20 MACH_BUG20 BUG20 3088
goflexnet MACH_GOFLEXNET GOFLEXNET 3089
torbreck MACH_TORBRECK TORBRECK 3090
saarb_mg1 MACH_SAARB_MG1 SAARB_MG1 3091
callisto MACH_CALLISTO CALLISTO 3092
multhsu MACH_MULTHSU MULTHSU 3093
saluda MACH_SALUDA SALUDA 3094
pemp_omap3_apollo MACH_PEMP_OMAP3_APOLLO PEMP_OMAP3_APOLLO 3095
vc0718 MACH_VC0718 VC0718 3096
mvblx MACH_MVBLX MVBLX 3097
inhand_apeiron MACH_INHAND_APEIRON INHAND_APEIRON 3098
inhand_fury MACH_INHAND_FURY INHAND_FURY 3099
inhand_siren MACH_INHAND_SIREN INHAND_SIREN 3100
hdnvp MACH_HDNVP HDNVP 3101
softwinner MACH_SOFTWINNER SOFTWINNER 3102
prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103
nas6210 MACH_NAS6210 NAS6210 3104
unisdev MACH_UNISDEV UNISDEV 3105
sbca11 MACH_SBCA11 SBCA11 3106
saga MACH_SAGA SAGA 3107
ns_k330 MACH_NS_K330 NS_K330 3108
tanna MACH_TANNA TANNA 3109
imate8502 MACH_IMATE8502 IMATE8502 3110
aspen MACH_ASPEN ASPEN 3111
daintree_cwac MACH_DAINTREE_CWAC DAINTREE_CWAC 3112
zmx25 MACH_ZMX25 ZMX25 3113
maple1 MACH_MAPLE1 MAPLE1 3114
qsd8x72_surf MACH_QSD8X72_SURF QSD8X72_SURF 3115
qsd8x72_ffa MACH_QSD8X72_FFA QSD8X72_FFA 3116
abilene MACH_ABILENE ABILENE 3117
eigen_ttr MACH_EIGEN_TTR EIGEN_TTR 3118
iomega_ix2_200 MACH_IOMEGA_IX2_200 IOMEGA_IX2_200 3119
coretec_vcx7400 MACH_CORETEC_VCX7400 CORETEC_VCX7400 3120
santiago MACH_SANTIAGO SANTIAGO 3121
mx257sol MACH_MX257SOL MX257SOL 3122
strasbourg MACH_STRASBOURG STRASBOURG 3123
msm8x60_fluid MACH_MSM8X60_FLUID MSM8X60_FLUID 3124
smartqv5 MACH_SMARTQV5 SMARTQV5 3125
smartqv3 MACH_SMARTQV3 SMARTQV3 3126
smartqv7 MACH_SMARTQV7 SMARTQV7 3127
paz00 MACH_PAZ00 PAZ00 3128
acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129
htcwillow MACH_HTCWILLOW HTCWILLOW 3130
fwbd_0404 MACH_FWBD_0404 FWBD_0404 3131
hdgu MACH_HDGU HDGU 3132
pyramid MACH_PYRAMID PYRAMID 3133
epiphan MACH_EPIPHAN EPIPHAN 3134
omap_bender MACH_OMAP_BENDER OMAP_BENDER 3135
gurnard MACH_GURNARD GURNARD 3136
gtl_it5100 MACH_GTL_IT5100 GTL_IT5100 3137
bcm2708 MACH_BCM2708 BCM2708 3138
mx51_ggc MACH_MX51_GGC MX51_GGC 3139
sharespace MACH_SHARESPACE SHARESPACE 3140
haba_knx_explorer MACH_HABA_KNX_EXPLORER HABA_KNX_EXPLORER 3141
simtec_kirkmod MACH_SIMTEC_KIRKMOD SIMTEC_KIRKMOD 3142
crux MACH_CRUX CRUX 3143
mx51_bravo MACH_MX51_BRAVO MX51_BRAVO 3144
charon MACH_CHARON CHARON 3145
picocom3 MACH_PICOCOM3 PICOCOM3 3146
picocom4 MACH_PICOCOM4 PICOCOM4 3147
serrano MACH_SERRANO SERRANO 3148
doubleshot MACH_DOUBLESHOT DOUBLESHOT 3149
evsy MACH_EVSY EVSY 3150
huashan MACH_HUASHAN HUASHAN 3151
lausanne MACH_LAUSANNE LAUSANNE 3152
emerald MACH_EMERALD EMERALD 3153
tqma35 MACH_TQMA35 TQMA35 3154
marvel MACH_MARVEL MARVEL 3155
manuae MACH_MANUAE MANUAE 3156
chacha MACH_CHACHA CHACHA 3157
lemon MACH_LEMON LEMON 3158
csc MACH_CSC CSC 3159
gira_knxip_router MACH_GIRA_KNXIP_ROUTER GIRA_KNXIP_ROUTER 3160
t20 MACH_T20 T20 3161
hdmini MACH_HDMINI HDMINI 3162
sciphone_g2 MACH_SCIPHONE_G2 SCIPHONE_G2 3163
express MACH_EXPRESS EXPRESS 3164
express_kt MACH_EXPRESS_KT EXPRESS_KT 3165
maximasp MACH_MAXIMASP MAXIMASP 3166
nitrogen_imx51 MACH_NITROGEN_IMX51 NITROGEN_IMX51 3167
nitrogen_imx53 MACH_NITROGEN_IMX53 NITROGEN_IMX53 3168
sunfire MACH_SUNFIRE SUNFIRE 3169
arowana MACH_AROWANA AROWANA 3170
tegra_daytona MACH_TEGRA_DAYTONA TEGRA_DAYTONA 3171
tegra_swordfish MACH_TEGRA_SWORDFISH TEGRA_SWORDFISH 3172
edison MACH_EDISON EDISON 3173
svp8500v1 MACH_SVP8500V1 SVP8500V1 3174
svp8500v2 MACH_SVP8500V2 SVP8500V2 3175
svp5500 MACH_SVP5500 SVP5500 3176
b5500 MACH_B5500 B5500 3177
s5500 MACH_S5500 S5500 3178
icon MACH_ICON ICON 3179
elephant MACH_ELEPHANT ELEPHANT 3180
msm8x60_fusion MACH_MSM8X60_FUSION MSM8X60_FUSION 3181
shooter MACH_SHOOTER SHOOTER 3182
spade_lte MACH_SPADE_LTE SPADE_LTE 3183
philhwani MACH_PHILHWANI PHILHWANI 3184
gsncomm MACH_GSNCOMM GSNCOMM 3185
strasbourg_a2 MACH_STRASBOURG_A2 STRASBOURG_A2 3186
mmm MACH_MMM MMM 3187
davinci_dm365_bv MACH_DAVINCI_DM365_BV DAVINCI_DM365_BV 3188
ag5evm MACH_AG5EVM AG5EVM 3189
sc575plc MACH_SC575PLC SC575PLC 3190
sc575hmi MACH_SC575IPC SC575IPC 3191
omap3_tdm3730 MACH_OMAP3_TDM3730 OMAP3_TDM3730 3192
g7 MACH_G7 G7 3193
top9000_eval MACH_TOP9000_EVAL TOP9000_EVAL 3194
top9000_su MACH_TOP9000_SU TOP9000_SU 3195
utm300 MACH_UTM300 UTM300 3196
tsunagi MACH_TSUNAGI TSUNAGI 3197
ts75xx MACH_TS75XX TS75XX 3198
msm8x60_fusn_ffa MACH_MSM8X60_FUSN_FFA MSM8X60_FUSN_FFA 3199
ts47xx MACH_TS47XX TS47XX 3200
da850_k5 MACH_DA850_K5 DA850_K5 3201
ax502 MACH_AX502 AX502 3202
igep0032 MACH_IGEP0032 IGEP0032 3203
antero MACH_ANTERO ANTERO 3204
synergy MACH_SYNERGY SYNERGY 3205
ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206
wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207
punica MACH_PUNICA PUNICA 3208
sbc_nt250 MACH_SBC_NT250 SBC_NT250 3209
mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210
mackerel MACH_MACKEREL MACKEREL 3211
fa9x27 MACH_FA9X27 FA9X27 3213
ns2816tb MACH_NS2816TB NS2816TB 3214
ns2816_ntpad MACH_NS2816_NTPAD NS2816_NTPAD 3215
ns2816_ntnb MACH_NS2816_NTNB NS2816_NTNB 3216
kaen MACH_KAEN KAEN 3217
nv1000 MACH_NV1000 NV1000 3218
nuc950ts MACH_NUC950TS NUC950TS 3219
nokia_rm680 MACH_NOKIA_RM680 NOKIA_RM680 3220
ast2200 MACH_AST2200 AST2200 3221
lead MACH_LEAD LEAD 3222
unino1 MACH_UNINO1 UNINO1 3223
greeco MACH_GREECO GREECO 3224
verdi MACH_VERDI VERDI 3225
dm6446_adbox MACH_DM6446_ADBOX DM6446_ADBOX 3226
quad_salsa MACH_QUAD_SALSA QUAD_SALSA 3227
abb_gma_1_1 MACH_ABB_GMA_1_1 ABB_GMA_1_1 3228
svcid MACH_SVCID SVCID 3229
msm8960_sim MACH_MSM8960_SIM MSM8960_SIM 3230
msm8960_rumi3 MACH_MSM8960_RUMI3 MSM8960_RUMI3 3231
icon_g MACH_ICON_G ICON_G 3232
mb3 MACH_MB3 MB3 3233
gsia18s MACH_GSIA18S GSIA18S 3234
pivicc MACH_PIVICC PIVICC 3235
pcm048 MACH_PCM048 PCM048 3236
dds MACH_DDS DDS 3237
chalten_xa1 MACH_CHALTEN_XA1 CHALTEN_XA1 3238
arch/arm/vfp/vfphw.S
浏览文件 @ 8bcee183
......@@ -206,6 +206,7 @@ ENTRY(vfp_save_state)
mov pc, lr
ENDPROC(vfp_save_state)
.align
last_VFP_context_address:
.word last_VFP_context
......
arch/mn10300/include/asm/syscall.h 0 → 100644
浏览文件 @ 8bcee183
/* Access to user system call parameters and results
*
* See asm-generic/syscall.h for function descriptions.
*
* Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#ifndef _ASM_SYSCALL_H
#define _ASM_SYSCALL_H
#include <linux/sched.h>
#include <linux/err.h>
extern const unsigned long sys_call_table[];
static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
{
return regs->orig_d0;
}
static inline void syscall_rollback(struct task_struct *task,
struct pt_regs *regs)
{
regs->d0 = regs->orig_d0;
}
static inline long syscall_get_error(struct task_struct *task,
struct pt_regs *regs)
{
unsigned long error = regs->d0;
return IS_ERR_VALUE(error) ? error : 0;
}
static inline long syscall_get_return_value(struct task_struct *task,
struct pt_regs *regs)
{
return regs->d0;
}
static inline void syscall_set_return_value(struct task_struct *task,
struct pt_regs *regs,
int error, long val)
{
regs->d0 = (long) error ?: val;
}
static inline void syscall_get_arguments(struct task_struct *task,
struct pt_regs *regs,
unsigned int i, unsigned int n,
unsigned long *args)
{
switch (i) {
case 0:
if (!n--) break;
*args++ = regs->a0;
case 1:
if (!n--) break;
*args++ = regs->d1;
case 2:
if (!n--) break;
*args++ = regs->a3;
case 3:
if (!n--) break;
*args++ = regs->a2;
case 4:
if (!n--) break;
*args++ = regs->d3;
case 5:
if (!n--) break;
*args++ = regs->d2;
case 6:
if (!n--) break;
default:
BUG();
break;
}
}
static inline void syscall_set_arguments(struct task_struct *task,
struct pt_regs *regs,
unsigned int i, unsigned int n,
const unsigned long *args)
{
switch (i) {
case 0:
if (!n--) break;
regs->a0 = *args++;
case 1:
if (!n--) break;
regs->d1 = *args++;
case 2:
if (!n--) break;
regs->a3 = *args++;
case 3:
if (!n--) break;
regs->a2 = *args++;
case 4:
if (!n--) break;
regs->d3 = *args++;
case 5:
if (!n--) break;
regs->d2 = *args++;
case 6:
if (!n--) break;
default:
BUG();
break;
}
}
#endif /* _ASM_SYSCALL_H */
arch/mn10300/kernel/gdb-io-serial.c
浏览文件 @ 8bcee183
......@@ -73,7 +73,8 @@ void gdbstub_io_init(void)
GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI;
/* permit level 0 IRQs to take place */
local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
arch_local_change_intr_mask_level(
NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
}
/*
......
arch/mn10300/kernel/gdb-io-ttysm.c
浏览文件 @ 8bcee183
......@@ -87,7 +87,8 @@ void __init gdbstub_io_init(void)
tmp = *gdbstub_port->_control;
/* permit level 0 IRQs only */
local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
arch_local_change_intr_mask_level(
NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
}
/*
......
arch/mn10300/kernel/gdb-stub.c
浏览文件 @ 8bcee183
......@@ -1194,7 +1194,8 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
asm volatile("mov mdr,%0" : "=d"(mdr));
local_save_flags(epsw);
local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
arch_local_change_intr_mask_level(
NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
gdbstub_store_fpu();
......
arch/parisc/kernel/irq.c
浏览文件 @ 8bcee183
......@@ -75,9 +75,6 @@ static void cpu_unmask_irq(unsigned int irq)
smp_send_all_nop();
}
void no_ack_irq(unsigned int irq) { }
void no_end_irq(unsigned int irq) { }
void cpu_ack_irq(unsigned int irq)
{
unsigned long mask = EIEM_MASK(irq);
......@@ -241,7 +238,7 @@ int cpu_claim_irq(unsigned int irq, struct irq_chip *type, void *data)
/* for iosapic interrupts */
if (type) {
set_irq_chip_and_handler(irq, type, handle_level_irq);
set_irq_chip_and_handler(irq, type, handle_percpu_irq);
set_irq_chip_data(irq, data);
cpu_unmask_irq(irq);
}
......@@ -392,7 +389,7 @@ static void claim_cpu_irqs(void)
int i;
for (i = CPU_IRQ_BASE; i <= CPU_IRQ_MAX; i++) {
set_irq_chip_and_handler(i, &cpu_interrupt_type,
handle_level_irq);
handle_percpu_irq);
}
set_irq_handler(TIMER_IRQ, handle_percpu_irq);
......
arch/parisc/kernel/signal.c
浏览文件 @ 8bcee183
......@@ -98,7 +98,6 @@ void
sys_rt_sigreturn(struct pt_regs *regs, int in_syscall)
{
struct rt_sigframe __user *frame;
struct siginfo si;
sigset_t set;
unsigned long usp = (regs->gr[30] & ~(0x01UL));
unsigned long sigframe_size = PARISC_RT_SIGFRAME_SIZE;
......@@ -178,13 +177,7 @@ sys_rt_sigreturn(struct pt_regs *regs, int in_syscall)
give_sigsegv:
DBG(1,"sys_rt_sigreturn: Sending SIGSEGV\n");
si.si_signo = SIGSEGV;
si.si_errno = 0;
si.si_code = SI_KERNEL;
si.si_pid = task_pid_vnr(current);
si.si_uid = current_uid();
si.si_addr = &frame->uc;
force_sig_info(SIGSEGV, &si, current);
force_sig(SIGSEGV, current);
return;
}
......
arch/powerpc/mm/pgtable.c
浏览文件 @ 8bcee183
......@@ -92,7 +92,7 @@ static void pte_free_rcu_callback(struct rcu_head *head)
static void pte_free_submit(struct pte_freelist_batch *batch)
{
call_rcu(&batch->rcu, pte_free_rcu_callback);
call_rcu_sched(&batch->rcu, pte_free_rcu_callback);
}
void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift)
......
arch/s390/kernel/nmi.c
浏览文件 @ 8bcee183
......@@ -95,7 +95,6 @@ EXPORT_SYMBOL_GPL(s390_handle_mcck);
static int notrace s390_revalidate_registers(struct mci *mci)
{
int kill_task;
u64 tmpclock;
u64 zero;
void *fpt_save_area, *fpt_creg_save_area;
......@@ -214,11 +213,10 @@ static int notrace s390_revalidate_registers(struct mci *mci)
: "0", "cc");
#endif
/* Revalidate clock comparator register */
asm volatile(
" stck 0(%1)\n"
" sckc 0(%1)"
: "=m" (tmpclock) : "a" (&(tmpclock)) : "cc", "memory");
if (S390_lowcore.clock_comparator == -1)
set_clock_comparator(S390_lowcore.mcck_clock);
else
set_clock_comparator(S390_lowcore.clock_comparator);
/* Check if old PSW is valid */
if (!mci->wp)
/*
......
arch/s390/kernel/vtime.c
浏览文件 @ 8bcee183
......@@ -19,6 +19,7 @@
#include <linux/kernel_stat.h>
#include <linux/rcupdate.h>
#include <linux/posix-timers.h>
#include <linux/cpu.h>
#include <asm/s390_ext.h>
#include <asm/timer.h>
......@@ -566,6 +567,23 @@ void init_cpu_vtimer(void)
__ctl_set_bit(0,10);
}
static int __cpuinit s390_nohz_notify(struct notifier_block *self,
unsigned long action, void *hcpu)
{
struct s390_idle_data *idle;
long cpu = (long) hcpu;
idle = &per_cpu(s390_idle, cpu);
switch (action) {
case CPU_DYING:
case CPU_DYING_FROZEN:
idle->nohz_delay = 0;
default:
break;
}
return NOTIFY_OK;
}
void __init vtime_init(void)
{
/* request the cpu timer external interrupt */
......@@ -574,5 +592,6 @@ void __init vtime_init(void)
/* Enable cpu timer interrupts on the boot cpu. */
init_cpu_vtimer();
cpu_notifier(s390_nohz_notify, 0);
}
arch/s390/lib/delay.c
浏览文件 @ 8bcee183
......@@ -29,17 +29,21 @@ static void __udelay_disabled(unsigned long long usecs)
{
unsigned long mask, cr0, cr0_saved;
u64 clock_saved;
u64 end;
mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
end = get_clock() + (usecs << 12);
clock_saved = local_tick_disable();
set_clock_comparator(get_clock() + (usecs << 12));
__ctl_store(cr0_saved, 0, 0);
cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
__ctl_load(cr0 , 0, 0);
mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
lockdep_off();
trace_hardirqs_on();
__load_psw_mask(mask);
local_irq_disable();
do {
set_clock_comparator(end);
trace_hardirqs_on();
__load_psw_mask(mask);
local_irq_disable();
} while (get_clock() < end);
lockdep_on();
__ctl_load(cr0_saved, 0, 0);
local_tick_enable(clock_saved);
......
arch/sh/Kconfig
浏览文件 @ 8bcee183
......@@ -22,7 +22,8 @@ config SUPERH
select HAVE_SPARSE_IRQ
select RTC_LIB
select GENERIC_ATOMIC64
select GENERIC_HARDIRQS_NO_DEPRECATED
# Support the deprecated APIs until MFD and GPIOLIB catch up.
select GENERIC_HARDIRQS_NO_DEPRECATED if !MFD_SUPPORT && !GPIOLIB
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
......
arch/sh/boards/mach-ecovec24/setup.c
浏览文件 @ 8bcee183
......@@ -720,32 +720,6 @@ static struct platform_device camera_devices[] = {
};
/* FSI */
/*
* FSI-B use external clock which came from da7210.
* So, we should change parent of fsi
*/
#define FCLKBCR 0xa415000c
static void fsimck_init(struct clk *clk)
{
u32 status = __raw_readl(clk->enable_reg);
/* use external clock */
status &= ~0x000000ff;
status |= 0x00000080;
__raw_writel(status, clk->enable_reg);
}
static struct clk_ops fsimck_clk_ops = {
.init = fsimck_init,
};
static struct clk fsimckb_clk = {
.ops = &fsimck_clk_ops,
.enable_reg = (void __iomem *)FCLKBCR,
.rate = 0, /* unknown */
};
static struct sh_fsi_platform_info fsi_info = {
.portb_flags = SH_FSI_BRS_INV |
SH_FSI_OUT_SLAVE_MODE |
......@@ -1264,10 +1238,10 @@ static int __init arch_setup(void)
/* change parent of FSI B */
clk = clk_get(NULL, "fsib_clk");
if (!IS_ERR(clk)) {
clk_register(&fsimckb_clk);
clk_set_parent(clk, &fsimckb_clk);
clk_set_rate(clk, 11000);
clk_set_rate(&fsimckb_clk, 11000);
/* 48kHz dummy clock was used to make sure 1/1 divide */
clk_set_rate(&sh7724_fsimckb_clk, 48000);
clk_set_parent(clk, &sh7724_fsimckb_clk);
clk_set_rate(clk, 48000);
clk_put(clk);
}
......
arch/sh/boards/mach-se/7724/setup.c
浏览文件 @ 8bcee183
......@@ -283,31 +283,6 @@ static struct platform_device ceu1_device = {
};
/* FSI */
/*
* FSI-A use external clock which came from ak464x.
* So, we should change parent of fsi
*/
#define FCLKACR 0xa4150008
static void fsimck_init(struct clk *clk)
{
u32 status = __raw_readl(clk->enable_reg);
/* use external clock */
status &= ~0x000000ff;
status |= 0x00000080;
__raw_writel(status, clk->enable_reg);
}
static struct clk_ops fsimck_clk_ops = {
.init = fsimck_init,
};
static struct clk fsimcka_clk = {
.ops = &fsimck_clk_ops,
.enable_reg = (void __iomem *)FCLKACR,
.rate = 0, /* unknown */
};
/* change J20, J21, J22 pin to 1-2 connection to use slave mode */
static struct sh_fsi_platform_info fsi_info = {
.porta_flags = SH_FSI_BRS_INV |
......@@ -852,37 +827,29 @@ static int __init devices_setup(void)
gpio_request(GPIO_FN_KEYOUT0, NULL);
/* enable FSI */
gpio_request(GPIO_FN_FSIMCKB, NULL);
gpio_request(GPIO_FN_FSIMCKA, NULL);
gpio_request(GPIO_FN_FSIIASD, NULL);
gpio_request(GPIO_FN_FSIOASD, NULL);
gpio_request(GPIO_FN_FSIIABCK, NULL);
gpio_request(GPIO_FN_FSIIALRCK, NULL);
gpio_request(GPIO_FN_FSIOABCK, NULL);
gpio_request(GPIO_FN_FSIOALRCK, NULL);
gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
gpio_request(GPIO_FN_FSIIBSD, NULL);
gpio_request(GPIO_FN_FSIOBSD, NULL);
gpio_request(GPIO_FN_FSIIBBCK, NULL);
gpio_request(GPIO_FN_FSIIBLRCK, NULL);
gpio_request(GPIO_FN_FSIOBBCK, NULL);
gpio_request(GPIO_FN_FSIOBLRCK, NULL);
gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
gpio_request(GPIO_FN_FSIIASD, NULL);
/* set SPU2 clock to 83.4 MHz */
clk = clk_get(NULL, "spu_clk");
if (clk) {
if (!IS_ERR(clk)) {
clk_set_rate(clk, clk_round_rate(clk, 83333333));
clk_put(clk);
}
/* change parent of FSI A */
clk = clk_get(NULL, "fsia_clk");
if (clk) {
clk_register(&fsimcka_clk);
clk_set_parent(clk, &fsimcka_clk);
clk_set_rate(clk, 11000);
clk_set_rate(&fsimcka_clk, 11000);
if (!IS_ERR(clk)) {
/* 48kHz dummy clock was used to make sure 1/1 divide */
clk_set_rate(&sh7724_fsimcka_clk, 48000);
clk_set_parent(clk, &sh7724_fsimcka_clk);
clk_set_rate(clk, 48000);
clk_put(clk);
}
......
arch/sh/include/asm/cacheflush.h
浏览文件 @ 8bcee183
此差异已折叠。
arch/sh/include/asm/unistd_32.h
浏览文件 @ 8bcee183
此差异已折叠。
arch/sh/kernel/syscalls_32.S
浏览文件 @ 8bcee183
此差异已折叠。
arch/sh/mm/cache-sh4.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/sh/mm/cache-sh7705.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/sh/mm/cache.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/sh/mm/kmap.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/sparc/include/asm/openprom.h
浏览文件 @ 8bcee183
此差异已折叠。
arch/sparc/include/asm/oplib_32.h
浏览文件 @ 8bcee183
此差异已折叠。
arch/sparc/include/asm/oplib_64.h
浏览文件 @ 8bcee183
此差异已折叠。
arch/sparc/kernel/leon_kernel.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/sparc/prom/Makefile
浏览文件 @ 8bcee183
此差异已折叠。
arch/sparc/prom/console_32.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/sparc/prom/console_64.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/sparc/prom/devops_32.c 已删除 100644 → 0
浏览文件 @ 5ce2a2dd
此差异已折叠。
arch/sparc/prom/devops_64.c 已删除 100644 → 0
浏览文件 @ 5ce2a2dd
此差异已折叠。
arch/sparc/prom/misc_64.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/sparc/prom/printf.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/sparc/prom/tree_32.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/sparc/prom/tree_64.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/include/asm/msr-index.h
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/include/asm/paravirt.h
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/include/asm/pvclock.h
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/include/asm/uv/uv_hub.h
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/include/asm/uv/uv_mmrs.h
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/kernel/apic/hw_nmi.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/kernel/apic/x2apic_uv_x.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/kernel/cpu/perf_event.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/kernel/entry_32.S
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/kernel/entry_64.S
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/kernel/head_32.S
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/kernel/hw_breakpoint.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/kernel/mmconf-fam10h_64.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/kernel/pvclock.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/lguest/boot.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/lguest/i386_head.S
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/mm/tlb.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/pci/xen.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/platform/uv/tlb_uv.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/platform/uv/uv_time.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/xen/enlighten.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/xen/mmu.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/xen/platform-pci-unplug.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/xen/setup.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/xen/suspend.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/xen/time.c
浏览文件 @ 8bcee183
此差异已折叠。
arch/x86/xen/xen-ops.h
浏览文件 @ 8bcee183
此差异已折叠。
block/blk-throttle.c
浏览文件 @ 8bcee183
此差异已折叠。
block/bsg.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/acpi/ac.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/acpi/apei/erst.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/acpi/apei/hest.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/acpi/battery.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/acpi/ec.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/acpi/osl.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/acpi/power.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/acpi/processor_thermal.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/acpi/sleep.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/atm/adummy.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/atm/ambassador.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/atm/atmtcp.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/atm/eni.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/atm/firestream.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/atm/fore200e.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/atm/he.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/atm/horizon.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/atm/idt77252.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/atm/iphase.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/atm/lanai.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/atm/nicstar.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/atm/solos-pci.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/atm/zatm.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/block/amiflop.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/block/ataflop.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/block/cciss.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/block/rbd.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/block/xen-blkfront.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/bluetooth/ath3k.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/bluetooth/btusb.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/char/agp/intel-gtt.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/char/tpm/tpm_tis.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/connector/connector.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/dma/Makefile
浏览文件 @ 8bcee183
此差异已折叠。
drivers/dma/at_hdmac.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/dma/fsldma.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/dma/fsldma.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/dma/imx-dma.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/dma/imx-sdma.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/dma/intel_mid_dma.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/dma/ioat/Makefile
浏览文件 @ 8bcee183
此差异已折叠。
drivers/dma/pch_dma.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/dma/ppc4xx/adma.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/dma/shdma.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/edac/Makefile
浏览文件 @ 8bcee183
此差异已折叠。
drivers/edac/amd64_edac.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/edac/edac_core.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/edac/edac_mc.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/edac/mce_amd_inj.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/firewire/net.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/firewire/ohci.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpio/cs5535-gpio.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/drm_crtc.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/drm_crtc_helper.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/drm_irq.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/i915/i915_dma.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/i915/i915_gem.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/i915/i915_reg.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/i915/i915_suspend.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/i915/intel_acpi.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/i915/intel_dp.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/i915/intel_drv.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/i915/intel_lvds.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/i915/intel_sdvo.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/radeon/atom.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/radeon/r600.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/radeon/r600_cs.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/gpu/drm/radeon/r600_reg.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/hid/hid-core.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/hid/hid-egalax.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/hid/hid-input.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/hid/hid-tmff.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/hwmon/adm1026.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/hwmon/it87.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/hwmon/ltc4215.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/i2c/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
drivers/i2c/algos/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
drivers/i2c/busses/i2c-intel-mid.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/idle/intel_idle.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/infiniband/core/ud_header.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/infiniband/hw/mlx4/main.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/infiniband/hw/mlx4/qp.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/input/evdev.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/input/joystick/turbografx.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/input/keyboard/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
drivers/input/keyboard/Makefile
浏览文件 @ 8bcee183
此差异已折叠。
drivers/input/keyboard/gpio_keys_polled.c 0 → 100644
浏览文件 @ 8bcee183
此差异已折叠。
drivers/input/mouse/synaptics.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/input/serio/gscps2.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/input/tablet/wacom_wac.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/isdn/icn/icn.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/leds/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
drivers/macintosh/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
drivers/md/md.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/md/raid10.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/media/common/tuners/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
drivers/media/dvb/frontends/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
drivers/media/radio/radio-si4713.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/media/video/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
drivers/media/video/cafe_ccic.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/media/video/cx18/cx18-i2c.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/media/video/fsl-viu.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/media/video/ivtv/ivtv-i2c.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/media/video/mxb.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/media/video/sh_vou.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/media/video/soc_camera.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/media/video/v4l2-common.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/media/video/via-camera.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/media/video/vino.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/mmc/core/core.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/mmc/core/mmc.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/mmc/core/sdio.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/mmc/core/sdio_bus.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/mmc/host/omap_hsmmc.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/mmc/host/sdhci-esdhc-imx.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/mmc/host/sdhci-pci.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/mmc/host/sdhci-pxa.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/mmc/host/sdhci.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/mmc/host/sdhci.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/mmc/host/ushc.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/mtd/maps/pxa2xx-flash.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/mtd/nand/omap2.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/mtd/ubi/io.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/mtd/ubi/scan.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/au1000_eth.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/b44.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/benet/be_cmds.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/bnx2x/bnx2x.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/bnx2x/bnx2x_cmn.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/bnx2x/bnx2x_init_ops.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/bonding/bond_main.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/bonding/bonding.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/caif/caif_shm_u5500.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/caif/caif_shmcore.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/cxgb4/t4_hw.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/cxgb4vf/cxgb4vf_main.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/cxgb4vf/t4vf_hw.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/ehea/ehea_ethtool.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/ehea/ehea_main.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/enic/enic_main.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/ifb.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/ixgbe/ixgbe_main.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/mlx4/fw.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/pch_gbe/pch_gbe_main.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/pch_gbe/pch_gbe_param.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/phy/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/phy/icplus.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/ppp_generic.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/pppoe.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/qlge/qlge.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/qlge/qlge_main.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/qlge/qlge_mpi.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/r8169.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/sfc/efx.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/sfc/net_driver.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/sfc/nic.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/stmmac/stmmac_main.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/tulip/dmfe.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/ucc_geth.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/usb/hso.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/wan/hd64572.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/wan/x25_asy.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/wireless/ath/ath9k/hw.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/wireless/b43/sdio.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/wireless/orinoco/main.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/wireless/orinoco/scan.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/wireless/orinoco/scan.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/wireless/orinoco/wext.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/net/xen-netfront.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/parisc/dino.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/parisc/eisa.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/parisc/gsc.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/parisc/iosapic.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/parisc/led.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/parisc/superio.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/pcmcia/soc_common.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/platform/x86/asus-laptop.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/platform/x86/eeepc-wmi.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/platform/x86/hp-wmi.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/platform/x86/ibm_rtl.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/platform/x86/msi-wmi.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/platform/x86/toshiba_acpi.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/platform/x86/wmi.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/pnp/pnpacpi/core.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/regulator/core.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/regulator/twl-regulator.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/s390/cio/css.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/s390/cio/qdio_thinint.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/s390/scsi/zfcp_erp.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/s390/scsi/zfcp_fsf.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/s390/scsi/zfcp_scsi.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/scsi/hpsa.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/scsi/osd/osd_initiator.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/scsi/pmcraid.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/scsi/pmcraid.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/scsi/qla2xxx/qla_def.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/scsi/qla2xxx/qla_iocb.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/scsi/qla2xxx/qla_isr.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/scsi/qla2xxx/qla_nx.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/scsi/qla2xxx/qla_os.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/scsi/qla2xxx/qla_version.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/scsi/scsi_error.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/scsi/scsi_lib.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/serial/8250.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/serial/kgdboc.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/serial/mfd.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/spi/atmel_spi.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/spi/dw_spi.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/ssb/b43_pci_bridge.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/staging/brcm80211/README
浏览文件 @ 8bcee183
此差异已折叠。
drivers/staging/brcm80211/TODO
浏览文件 @ 8bcee183
此差异已折叠。
drivers/staging/easycap/easycap.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/staging/line6/control.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/staging/line6/midi.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/staging/line6/pcm.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/staging/line6/pod.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/staging/line6/toneport.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/staging/line6/variax.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/staging/speakup/fakekey.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/staging/spectra/ffsport.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/staging/udlfb/udlfb.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/staging/winbond/sysdef.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/staging/zram/zram_sysfs.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/tty/tty_io.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/tty/tty_ldisc.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/uio/uio.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/uio/uio_cif.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/uio/uio_netx.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/usb/atm/usbatm.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/usb/core/hcd.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/usb/host/ehci-pci.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/usb/host/xhci-hub.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/usb/host/xhci-mem.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/usb/host/xhci.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/usb/host/xhci.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/usb/misc/yurex.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/usb/musb/musb_core.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/usb/musb/musb_gadget.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/usb/serial/ftdi_sio.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/usb/serial/ftdi_sio_ids.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/usb/serial/usb-serial.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/vhost/net.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/vhost/vhost.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/video/da8xx-fb.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/video/fbcmap.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/video/geode/lxfb.h
浏览文件 @ 8bcee183
此差异已折叠。
drivers/video/geode/lxfb_ops.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/video/modedb.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/watchdog/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
drivers/watchdog/bcm63xx_wdt.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/watchdog/gef_wdt.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/watchdog/iTCO_wdt.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/xen/balloon.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/xen/events.c
浏览文件 @ 8bcee183
此差异已折叠。
drivers/xen/manage.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/autofs4/root.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/compression.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/ctree.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/disk-io.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/export.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/extent-tree.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/extent_io.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/extent_io.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/file.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/free-space-cache.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/inode.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/ioctl.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/ioctl.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/ordered-data.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/ordered-data.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/orphan.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/super.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/transaction.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/tree-log.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/volumes.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/btrfs/volumes.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/ceph/dir.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/ceph/ioctl.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/ceph/locks.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/ceph/mds_client.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/ceph/mds_client.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/Makefile
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/README
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/cifs_fs_sb.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/cifsacl.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/cifsacl.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/cifsfs.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/cifsglob.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/cifsproto.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/cifssmb.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/connect.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/dns_resolve.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/file.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/fscache.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/inode.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/readdir.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/cifs/xattr.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/compat.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/exec.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/ext4/ext4.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/ext4/inode.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/ext4/namei.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/ext4/super.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/fuse/file.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/gfs2/quota.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/ioprio.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfs/dir.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfs/direct.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfs/file.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfs/inode.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfs/internal.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfs/mount_clnt.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfs/nfs2xdr.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfs/nfs3xdr.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfs/nfs4proc.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfs/nfs4xdr.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfs/pagelist.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfs/read.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfs/super.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfs/write.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfsd/nfs3xdr.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nfsd/xdr4.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/nilfs2/dat.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nilfs2/gcinode.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/nilfs2/ioctl.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/ocfs2/cluster/heartbeat.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/ocfs2/dcache.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/ocfs2/dlm/dlmdomain.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/ocfs2/ocfs2.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/ocfs2/stack_user.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/pipe.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/proc/base.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/reiserfs/xattr_acl.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/splice.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/xfs/linux-2.6/xfs_aops.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/xfs/linux-2.6/xfs_buf.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/xfs/xfs_bmap.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/xfs/xfs_bmap.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/xfs/xfs_dfrag.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/xfs/xfs_error.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/xfs/xfs_error.h
浏览文件 @ 8bcee183
此差异已折叠。
fs/xfs/xfs_inode_item.c
浏览文件 @ 8bcee183
此差异已折叠。
fs/xfs/xfs_rename.c
浏览文件 @ 8bcee183
此差异已折叠。
include/acpi/video.h
浏览文件 @ 8bcee183
此差异已折叠。
include/drm/i915_drm.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/acpi.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/atmdev.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/binfmts.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/cpu.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/dmar.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/fs.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/gfp.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/gpio_keys.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/hw_breakpoint.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/input.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/memory_hotplug.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/mfd/wm8994/pdata.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/mmc/host.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/nfs_fs.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/nfs_page.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/nfs_xdr.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/node.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/pci_ids.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/perf_event.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/pipe_fs_i.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/snmp.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/tty.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/uio_driver.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/usb.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/video_output.h
浏览文件 @ 8bcee183
此差异已折叠。
include/linux/vmalloc.h
浏览文件 @ 8bcee183
此差异已折叠。
include/media/v4l2-common.h
浏览文件 @ 8bcee183
此差异已折叠。
include/net/af_unix.h
浏览文件 @ 8bcee183
此差异已折叠。
include/net/sock.h
浏览文件 @ 8bcee183
此差异已折叠。
include/xen/events.h
浏览文件 @ 8bcee183
此差异已折叠。
include/xen/interface/io/ring.h
浏览文件 @ 8bcee183
此差异已折叠。
include/xen/interface/physdev.h
浏览文件 @ 8bcee183
此差异已折叠。
kernel/exit.c
浏览文件 @ 8bcee183
此差异已折叠。
kernel/hw_breakpoint.c
浏览文件 @ 8bcee183
此差异已折叠。
kernel/irq/proc.c
浏览文件 @ 8bcee183
此差异已折叠。
kernel/irq_work.c
浏览文件 @ 8bcee183
此差异已折叠。
kernel/module.c
浏览文件 @ 8bcee183
此差异已折叠。
kernel/perf_event.c
浏览文件 @ 8bcee183
此差异已折叠。
kernel/posix-cpu-timers.c
浏览文件 @ 8bcee183
此差异已折叠。
kernel/power/hibernate.c
浏览文件 @ 8bcee183
此差异已折叠。
kernel/power/suspend.c
浏览文件 @ 8bcee183
此差异已折叠。
kernel/power/swap.c
浏览文件 @ 8bcee183
此差异已折叠。
kernel/power/user.c
浏览文件 @ 8bcee183
此差异已折叠。
kernel/printk.c
浏览文件 @ 8bcee183
此差异已折叠。
kernel/sched_fair.c
浏览文件 @ 8bcee183
此差异已折叠。
kernel/trace/trace.c
浏览文件 @ 8bcee183
此差异已折叠。
kernel/workqueue.c
浏览文件 @ 8bcee183
此差异已折叠。
lib/debug_locks.c
浏览文件 @ 8bcee183
此差异已折叠。
mm/filemap.c
浏览文件 @ 8bcee183
此差异已折叠。
mm/hugetlb.c
浏览文件 @ 8bcee183
此差异已折叠。
mm/ksm.c
浏览文件 @ 8bcee183
此差异已折叠。
mm/memory-failure.c
浏览文件 @ 8bcee183
此差异已折叠。
mm/memory_hotplug.c
浏览文件 @ 8bcee183
此差异已折叠。
mm/mempolicy.c
浏览文件 @ 8bcee183
此差异已折叠。
mm/mmap.c
浏览文件 @ 8bcee183
此差异已折叠。
mm/page_alloc.c
浏览文件 @ 8bcee183
此差异已折叠。
mm/slub.c
浏览文件 @ 8bcee183
此差异已折叠。
mm/truncate.c
浏览文件 @ 8bcee183
此差异已折叠。
mm/vmalloc.c
浏览文件 @ 8bcee183
此差异已折叠。
mm/vmscan.c
浏览文件 @ 8bcee183
此差异已折叠。
mm/vmstat.c
浏览文件 @ 8bcee183
此差异已折叠。
net/atm/atm_sysfs.c
浏览文件 @ 8bcee183
此差异已折叠。
net/atm/resources.c
浏览文件 @ 8bcee183
此差异已折叠。
net/atm/resources.h
浏览文件 @ 8bcee183
此差异已折叠。
net/bluetooth/sco.c
浏览文件 @ 8bcee183
此差异已折叠。
net/ceph/Makefile
浏览文件 @ 8bcee183
此差异已折叠。
net/core/filter.c
浏览文件 @ 8bcee183
此差异已折叠。
net/core/timestamping.c
浏览文件 @ 8bcee183
此差异已折叠。
net/dccp/input.c
浏览文件 @ 8bcee183
此差异已折叠。
net/decnet/af_decnet.c
浏览文件 @ 8bcee183
此差异已折叠。
net/econet/af_econet.c
浏览文件 @ 8bcee183
此差异已折叠。
net/ipv4/inet_hashtables.c
浏览文件 @ 8bcee183
此差异已折叠。
net/ipv4/proc.c
浏览文件 @ 8bcee183
此差异已折叠。
net/ipv4/sysctl_net_ipv4.c
浏览文件 @ 8bcee183
此差异已折叠。
net/ipv4/tcp.c
浏览文件 @ 8bcee183
此差异已折叠。
net/ipv4/tcp_ipv4.c
浏览文件 @ 8bcee183
此差异已折叠。
net/ipv4/tcp_minisocks.c
浏览文件 @ 8bcee183
此差异已折叠。
net/ipv4/tcp_output.c
浏览文件 @ 8bcee183
此差异已折叠。
net/ipv6/addrconf.c
浏览文件 @ 8bcee183
此差异已折叠。
net/ipv6/ip6_tunnel.c
浏览文件 @ 8bcee183
此差异已折叠。
net/ipv6/sit.c
浏览文件 @ 8bcee183
此差异已折叠。
net/l2tp/l2tp_ip.c
浏览文件 @ 8bcee183
此差异已折叠。
net/llc/af_llc.c
浏览文件 @ 8bcee183
此差异已折叠。
net/mac80211/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
net/mac80211/rx.c
浏览文件 @ 8bcee183
此差异已折叠。
net/mac80211/tx.c
浏览文件 @ 8bcee183
此差异已折叠。
net/sctp/socket.c
浏览文件 @ 8bcee183
此差异已折叠。
net/socket.c
浏览文件 @ 8bcee183
此差异已折叠。
net/sunrpc/clnt.c
浏览文件 @ 8bcee183
此差异已折叠。
net/sunrpc/svc_xprt.c
浏览文件 @ 8bcee183
此差异已折叠。
net/unix/af_unix.c
浏览文件 @ 8bcee183
此差异已折叠。
net/unix/garbage.c
浏览文件 @ 8bcee183
此差异已折叠。
net/x25/x25_link.c
浏览文件 @ 8bcee183
此差异已折叠。
net/xfrm/xfrm_state.c
浏览文件 @ 8bcee183
此差异已折叠。
scripts/kconfig/expr.h
浏览文件 @ 8bcee183
此差异已折叠。
scripts/kconfig/lkc.h
浏览文件 @ 8bcee183
此差异已折叠。
scripts/kconfig/menu.c
浏览文件 @ 8bcee183
此差异已折叠。
scripts/kconfig/zconf.gperf
浏览文件 @ 8bcee183
此差异已折叠。
scripts/kconfig/zconf.tab.c_shipped
浏览文件 @ 8bcee183
此差异已折叠。
scripts/kconfig/zconf.y
浏览文件 @ 8bcee183
此差异已折叠。
sound/core/oss/pcm_oss.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/pci/hda/hda_eld.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/pci/hda/hda_intel.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/pci/hda/patch_conexant.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/pci/hda/patch_hdmi.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/pci/hda/patch_realtek.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/pci/hda/patch_sigmatel.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/atmel/sam9g20_wm8731.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/atmel/snd-soc-afeb9260.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/codecs/max98088.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/codecs/stac9766.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/codecs/tlv320aic3x.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/codecs/tpa6130a2.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/codecs/wm8523.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/codecs/wm8580.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/codecs/wm8731.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/codecs/wm8904.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/codecs/wm8961.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/codecs/wm8962.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/codecs/wm8994.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/codecs/wm_hubs.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/davinci/davinci-vcif.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/ep93xx/simone.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/fsl/efika-audio-fabric.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/fsl/mpc5200_dma.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/fsl/mpc8610_hpcd.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/fsl/p1022_ds.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/fsl/pcm030-audio-fabric.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/imx/imx-ssi.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/imx/phycore-ac97.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/nuc900/nuc900-ac97.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/nuc900/nuc900-audio.h
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/nuc900/nuc900-pcm.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/omap/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/omap/omap3pandora.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/omap/osk5912.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/pxa/Kconfig
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/s3c24xx/smdk_spdif.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/s6000/s6000-i2s.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/s6000/s6000-pcm.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/s6000/s6105-ipcam.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/sh/ssi.c
浏览文件 @ 8bcee183
此差异已折叠。
sound/soc/soc-core.c
浏览文件 @ 8bcee183
此差异已折叠。
tools/perf/builtin-record.c
浏览文件 @ 8bcee183
此差异已折叠。
tools/perf/util/header.c
浏览文件 @ 8bcee183
此差异已折叠。
tools/perf/util/symbol.c
浏览文件 @ 8bcee183
此差异已折叠。
usr/initramfs_data.S
浏览文件 @ 8bcee183
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或