iwlwifi: move D3_CFG_COMPLETE handling into DVM

The MVM firmware doesn't communicate this way, it instead
assumes D3 configuration is complete after a specific host
command (which must be last) has been sent. Handling this
bit thus belongs into the firmware API code, i.e. DVM.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>

drivers/net/wireless/iwlwifi/dvm/mac80211.c

@@ -426,6 +426,10 @@ static int iwlagn_mac_suspend(struct ieee80211_hw *hw,
 	if (ret)
 		goto error;
 
+	/* let the ucode operate on its own */
+	iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_SET,
+		    CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE);
+
 	iwl_trans_d3_suspend(priv->trans);
 
 	goto out;
@@ -509,6 +513,10 @@ static int iwlagn_mac_resume(struct ieee80211_hw *hw)
 		goto out_unlock;
 	}
 
+	/* uCode is no longer operating by itself */
+	iwl_write32(priv->trans, CSR_UCODE_DRV_GP1_CLR,
+		    CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE);
+
 	base = priv->device_pointers.error_event_table;
 	if (!iwlagn_hw_valid_rtc_data_addr(base)) {
 		IWL_WARN(priv, "Invalid error table during resume!\n");

drivers/net/wireless/iwlwifi/pcie/trans.c

@@ -580,10 +580,6 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
 
 static void iwl_trans_pcie_d3_suspend(struct iwl_trans *trans)
 {
-	/* let the ucode operate on its own */
-	iwl_write32(trans, CSR_UCODE_DRV_GP1_SET,
-		    CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE);
-
 	iwl_disable_interrupts(trans);
 	iwl_pcie_disable_ict(trans);
 
@@ -643,9 +639,6 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans,
 		return ret;
 	}
 
-	iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR,
-		    CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE);
-
 	*status = IWL_D3_STATUS_ALIVE;
 	return 0;
 }