ARM: dts: Add initial support for Wandboard Dual-Lite

Wandboard is a development board that has two variants: one version based
on mx6 dual lite and another one based on mx6 solo.

For more details about Wandboard, please refer to: http://www.wandboard.org/Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/Makefile

@@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx53-smd.dtb \
 	imx6dl-sabreauto.dtb \
 	imx6dl-sabresd.dtb \
+	imx6dl-wandboard.dtb \
 	imx6q-arm2.dtb \
 	imx6q-sabreauto.dtb \
 	imx6q-sabrelite.dtb \

arch/arm/boot/dts/imx6dl-wandboard.dts

+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Dual Lite Board";
+	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_1>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	status = "okay";
+};

arch/arm/boot/dts/imx6dl.dtsi

@@ -136,6 +136,17 @@
 							MX6DL_PAD_SD3_DAT7__SD3_DATA7 0x17059
 						>;
 					};
+
+					pinctrl_usdhc3_2: usdhc3grp_2 {
+						fsl,pins = <
+							MX6DL_PAD_SD3_CMD__SD3_CMD    0x17059
+							MX6DL_PAD_SD3_CLK__SD3_CLK    0x10059
+							MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+							MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+							MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+							MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+						>;
+					};
 				};