ARM: tegra: move tegra_cpu_car.h to linux/clk/tegra.h

tegra_cpu_car_ops struct is going to be accessed from drivers/clk/tegra.
Move the tegra_cpu_car_ops to include/linux/clk/tegra.h.
Signed-off-by: NPrashant Gaikwad <pgaikwad@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>

arch/arm/mach-tegra/clock.c

@@ -26,10 +26,10 @@
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
+#include <linux/clk/tegra.h>
 
 #include "board.h"
 #include "clock.h"
-#include "tegra_cpu_car.h"
 
 /* Global data of Tegra CPU CAR ops */
 struct tegra_cpu_car_ops *tegra_cpu_car_ops;

arch/arm/mach-tegra/cpuidle-tegra30.c

@@ -24,6 +24,7 @@
 #include <linux/cpuidle.h>
 #include <linux/cpu_pm.h>
 #include <linux/clockchips.h>
+#include <linux/clk/tegra.h>
 
 #include <asm/cpuidle.h>
 #include <asm/proc-fns.h>
@@ -32,7 +33,6 @@
 
 #include "pm.h"
 #include "sleep.h"
-#include "tegra_cpu_car.h"
 
 #ifdef CONFIG_PM_SLEEP
 static int tegra30_idle_lp2(struct cpuidle_device *dev,

arch/arm/mach-tegra/hotplug.c

@@ -10,12 +10,12 @@
  */
 #include <linux/kernel.h>
 #include <linux/smp.h>
+#include <linux/clk/tegra.h>
 
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
 
 #include "sleep.h"
-#include "tegra_cpu_car.h"
 
 static void (*tegra_hotplug_shutdown)(void);
 

arch/arm/mach-tegra/platsmp.c

@@ -18,6 +18,7 @@
 #include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/clk/tegra.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/gic.h>
@@ -30,7 +31,6 @@
 #include "fuse.h"
 #include "flowctrl.h"
 #include "reset.h"
-#include "tegra_cpu_car.h"
 
 #include "common.h"
 #include "iomap.h"

arch/arm/mach-tegra/pm.c

@@ -24,6 +24,7 @@
 #include <linux/cpu_pm.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/clk/tegra.h>
 
 #include <asm/smp_plat.h>
 #include <asm/cacheflush.h>
@@ -36,7 +37,6 @@
 #include "reset.h"
 #include "flowctrl.h"
 #include "sleep.h"
-#include "tegra_cpu_car.h"
 
 #define TEGRA_POWER_CPU_PWRREQ_OE	(1 << 16)  /* CPU pwr req enable */
 

arch/arm/mach-tegra/tegra20_clocks.c

@@ -26,12 +26,12 @@
 #include <linux/io.h>
 #include <linux/clkdev.h>
 #include <linux/clk.h>
+#include <linux/clk/tegra.h>
 
 #include "clock.h"
 #include "fuse.h"
 #include "iomap.h"
 #include "tegra2_emc.h"
-#include "tegra_cpu_car.h"
 
 #define RST_DEVICES			0x004
 #define RST_DEVICES_SET			0x300

arch/arm/mach-tegra/tegra20_clocks_data.c

@@ -26,12 +26,12 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/tegra.h>
 
 #include "clock.h"
 #include "fuse.h"
 #include "tegra2_emc.h"
 #include "tegra20_clocks.h"
-#include "tegra_cpu_car.h"
 
 /* Clock definitions */
 

arch/arm/mach-tegra/tegra30_clocks.c

@@ -28,6 +28,7 @@
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/syscore_ops.h>
+#include <linux/clk/tegra.h>
 
 #include <asm/clkdev.h>
 
@@ -36,7 +37,6 @@
 #include "clock.h"
 #include "fuse.h"
 #include "iomap.h"
-#include "tegra_cpu_car.h"
 
 #define USE_PLL_LOCK_BITS 0
 

arch/arm/mach-tegra/tegra30_clocks_data.c

@@ -28,11 +28,11 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
+#include <linux/clk/tegra.h>
 
 #include "clock.h"
 #include "fuse.h"
 #include "tegra30_clocks.h"
-#include "tegra_cpu_car.h"
 
 #define DEFINE_CLK_TEGRA(_name, _rate, _ops, _flags,		\
 		   _parent_names, _parents, _parent)		\

arch/arm/mach-tegra/tegra_cpu_car.h → include/linux/clk/tegra.h

@@ -14,8 +14,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef __MACH_TEGRA_CPU_CAR_H
-#define __MACH_TEGRA_CPU_CAR_H
+#ifndef __LINUX_CLK_TEGRA_H_
+#define __LINUX_CLK_TEGRA_H_
 
 /*
  * Tegra CPU clock and reset control ops
@@ -121,4 +121,4 @@ static inline void tegra_cpu_clock_resume(void)
 void tegra20_cpu_car_ops_init(void);
 void tegra30_cpu_car_ops_init(void);
 
-#endif /* __MACH_TEGRA_CPU_CAR_H */
+#endif /* __LINUX_CLK_TEGRA_H_ */