提交 8930c8aa 编写于 作者: T Takashi Iwai 提交者: Linus Torvalds

memstick: add support for JMicron JMB 385 and 390 controllers

Signed-off-by: NAries Lee <arieslee@jmicron.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 68860b96
......@@ -765,6 +765,8 @@ static int jmb38x_ms_set_param(struct memstick_host *msh,
#define PMOS0_SW_LED_POLARITY_ENABLE 0x80
#define PMOS0_ACTIVE_BITS (PMOS0_ENABLE | PMOS0_EN_OVERCURRENT_DEBOUNCE | \
PMOS0_OVERCURRENT_LEVEL_2_4V)
#define PCI_PMOS1_CONTROL 0xbd
#define PMOS1_ACTIVE_BITS 0x4a
#define PCI_CLOCK_CTL 0xb9
static int jmb38x_ms_pmos(struct pci_dev *pdev, int flag)
......@@ -779,6 +781,16 @@ static int jmb38x_ms_pmos(struct pci_dev *pdev, int flag)
pci_write_config_byte(pdev, PCI_PMOS0_CONTROL, val);
dev_dbg(&pdev->dev, "JMB38x: set PMOS0 val 0x%x\n", val);
if (pci_resource_flags(pdev, 1)) {
pci_read_config_byte(pdev, PCI_PMOS1_CONTROL, &val);
if (flag)
val |= PMOS1_ACTIVE_BITS;
else
val &= ~PMOS1_ACTIVE_BITS;
pci_write_config_byte(pdev, PCI_PMOS1_CONTROL, val);
dev_dbg(&pdev->dev, "JMB38x: set PMOS1 val 0x%x\n", val);
}
pci_read_config_byte(pdev, PCI_CLOCK_CTL, &val);
pci_write_config_byte(pdev, PCI_CLOCK_CTL, val & ~0x0f);
pci_write_config_byte(pdev, PCI_CLOCK_CTL, val | 0x01);
......@@ -1018,8 +1030,9 @@ static void jmb38x_ms_remove(struct pci_dev *dev)
}
static struct pci_device_id jmb38x_ms_id_tbl [] = {
{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_MS, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, 0 },
{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_MS) },
{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB385_MS) },
{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB390_MS) },
{ }
};
......
......@@ -2369,8 +2369,10 @@
#define PCI_DEVICE_ID_JMICRON_JMB38X_SD 0x2381
#define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382
#define PCI_DEVICE_ID_JMICRON_JMB38X_MS 0x2383
#define PCI_DEVICE_ID_JMICRON_JMB385_MS 0x2388
#define PCI_DEVICE_ID_JMICRON_JMB388_SD 0x2391
#define PCI_DEVICE_ID_JMICRON_JMB388_ESD 0x2392
#define PCI_DEVICE_ID_JMICRON_JMB390_MS 0x2393
#define PCI_VENDOR_ID_KORENIX 0x1982
#define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册