提交 881d948c 编写于 作者: J Johannes Berg 提交者: John W. Linville

wireless: restrict to 32 legacy rates

Since the standards only define 12 legacy rates, 32 is certainly
a sane upper limit and we don't need to use u64 everywhere. Add
sanity checking that no more than 32 rates are registered and
change the variables to u32 throughout.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 369391db
......@@ -3398,7 +3398,7 @@ static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
return err;
}
static void b43_update_basic_rates(struct b43_wldev *dev, u64 brates)
static void b43_update_basic_rates(struct b43_wldev *dev, u32 brates)
{
struct ieee80211_supported_band *sband =
dev->wl->hw->wiphy->bands[b43_current_band(dev->wl)];
......
......@@ -2650,7 +2650,7 @@ static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
return err;
}
static void b43legacy_update_basic_rates(struct b43legacy_wldev *dev, u64 brates)
static void b43legacy_update_basic_rates(struct b43legacy_wldev *dev, u32 brates)
{
struct ieee80211_supported_band *sband =
dev->wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ];
......
......@@ -144,7 +144,7 @@ struct p54_common {
unsigned int output_power;
u32 tsf_low32;
u32 tsf_high32;
u64 basic_rate_mask;
u32 basic_rate_mask;
u16 wakeup_timer;
u16 aid;
struct ieee80211_tx_queue_stats tx_stats[8];
......
......@@ -396,7 +396,7 @@ struct rt2x00lib_erp {
int ack_timeout;
int ack_consume_time;
u64 basic_rates;
u32 basic_rates;
int slot_time;
......
......@@ -207,7 +207,7 @@ struct ieee80211_bss_conf {
u16 beacon_int;
u16 assoc_capability;
u64 timestamp;
u64 basic_rates;
u32 basic_rates;
struct ieee80211_bss_ht_conf ht;
};
......@@ -761,7 +761,7 @@ enum set_key_cmd {
* sizeof(void *), size is determined in hw information.
*/
struct ieee80211_sta {
u64 supp_rates[IEEE80211_NUM_BANDS];
u32 supp_rates[IEEE80211_NUM_BANDS];
u8 addr[ETH_ALEN];
u16 aid;
struct ieee80211_sta_ht_cap ht_cap;
......
......@@ -367,7 +367,7 @@ ieee80211_get_channel(struct wiphy *wiphy, int freq)
*/
struct ieee80211_rate *
ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
u64 basic_rates, int bitrate);
u32 basic_rates, int bitrate);
/**
* regulatory_hint - driver hint to the wireless core a regulatory domain
......
......@@ -909,11 +909,11 @@ int ieee80211_sta_set_bssid(struct ieee80211_sub_if_data *sdata, u8 *bssid);
void ieee80211_sta_req_auth(struct ieee80211_sub_if_data *sdata,
struct ieee80211_if_sta *ifsta);
struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
u8 *bssid, u8 *addr, u64 supp_rates);
u8 *bssid, u8 *addr, u32 supp_rates);
int ieee80211_sta_deauthenticate(struct ieee80211_sub_if_data *sdata, u16 reason);
int ieee80211_sta_disassociate(struct ieee80211_sub_if_data *sdata, u16 reason);
u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata);
u64 ieee80211_sta_get_rates(struct ieee80211_local *local,
u32 ieee80211_sta_get_rates(struct ieee80211_local *local,
struct ieee802_11_elems *elems,
enum ieee80211_band band);
void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
......@@ -1026,7 +1026,7 @@ void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
void ieee802_11_parse_elems(u8 *start, size_t len,
struct ieee802_11_elems *elems);
int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freq);
u64 ieee80211_mandatory_rates(struct ieee80211_local *local,
u32 ieee80211_mandatory_rates(struct ieee80211_local *local,
enum ieee80211_band band);
void ieee80211_dynamic_ps_enable_work(struct work_struct *work);
......
......@@ -476,7 +476,7 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
struct ieee80211_local *local = sdata->local;
struct ieee802_11_elems elems;
struct ieee80211_channel *channel;
u64 supp_rates = 0;
u32 supp_rates = 0;
size_t baselen;
int freq;
enum ieee80211_band band = rx_status->band;
......
......@@ -236,7 +236,7 @@ void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt, size_t len);
int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata);
/* Mesh plinks */
void mesh_neighbour_update(u8 *hw_addr, u64 rates,
void mesh_neighbour_update(u8 *hw_addr, u32 rates,
struct ieee80211_sub_if_data *sdata, bool add);
bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie);
void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata);
......
......@@ -93,7 +93,7 @@ static inline void mesh_plink_fsm_restart(struct sta_info *sta)
* on it in the lifecycle management section!
*/
static struct sta_info *mesh_plink_alloc(struct ieee80211_sub_if_data *sdata,
u8 *hw_addr, u64 rates)
u8 *hw_addr, u32 rates)
{
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
......@@ -222,7 +222,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
return 0;
}
void mesh_neighbour_update(u8 *hw_addr, u64 rates, struct ieee80211_sub_if_data *sdata,
void mesh_neighbour_update(u8 *hw_addr, u32 rates, struct ieee80211_sub_if_data *sdata,
bool peer_accepting_plinks)
{
struct ieee80211_local *local = sdata->local;
......@@ -447,7 +447,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
spin_lock_bh(&sta->lock);
} else if (!sta) {
/* ftype == PLINK_OPEN */
u64 rates;
u32 rates;
if (!mesh_plink_free_count(sdata)) {
mpl_dbg("Mesh plink error: no more free plinks\n");
rcu_read_unlock();
......
......@@ -73,7 +73,7 @@ static u8 *ieee80211_bss_get_ie(struct ieee80211_bss *bss, u8 ie)
static int ieee80211_compatible_rates(struct ieee80211_bss *bss,
struct ieee80211_supported_band *sband,
u64 *rates)
u32 *rates)
{
int i, j, count;
*rates = 0;
......@@ -93,14 +93,14 @@ static int ieee80211_compatible_rates(struct ieee80211_bss *bss,
}
/* also used by mesh code */
u64 ieee80211_sta_get_rates(struct ieee80211_local *local,
u32 ieee80211_sta_get_rates(struct ieee80211_local *local,
struct ieee802_11_elems *elems,
enum ieee80211_band band)
{
struct ieee80211_supported_band *sband;
struct ieee80211_rate *bitrates;
size_t num_rates;
u64 supp_rates;
u32 supp_rates;
int i, j;
sband = local->hw.wiphy->bands[band];
......@@ -253,7 +253,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
struct ieee80211_bss *bss;
int wmm = 0;
struct ieee80211_supported_band *sband;
u64 rates = 0;
u32 rates = 0;
size_t e_ies_len;
if (ifsta->flags & IEEE80211_STA_PREV_BSSID_SET) {
......@@ -1282,7 +1282,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband;
struct sta_info *sta;
u64 rates, basic_rates;
u32 rates, basic_rates;
u16 capab_info, status_code, aid;
struct ieee802_11_elems elems;
struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
......@@ -1639,7 +1639,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta;
struct ieee80211_channel *channel;
u64 beacon_timestamp, rx_timestamp;
u64 supp_rates = 0;
u32 supp_rates = 0;
enum ieee80211_band band = rx_status->band;
if (elems->ds_params && elems->ds_params_len == 1)
......@@ -1660,7 +1660,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
sta = sta_info_get(local, mgmt->sa);
if (sta) {
u64 prev_rates;
u32 prev_rates;
prev_rates = sta->sta.supp_rates[band];
/* make sure mandatory rates are always added */
......@@ -2526,7 +2526,7 @@ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
* must be callable in atomic context.
*/
struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
u8 *bssid,u8 *addr, u64 supp_rates)
u8 *bssid,u8 *addr, u32 supp_rates)
{
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
......
......@@ -731,12 +731,12 @@ int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freqMHz)
return ret;
}
u64 ieee80211_mandatory_rates(struct ieee80211_local *local,
u32 ieee80211_mandatory_rates(struct ieee80211_local *local,
enum ieee80211_band band)
{
struct ieee80211_supported_band *sband;
struct ieee80211_rate *bitrates;
u64 mandatory_rates;
u32 mandatory_rates;
enum ieee80211_rate_flags mandatory_flag;
int i;
......
......@@ -273,10 +273,16 @@ int wiphy_register(struct wiphy *wiphy)
sband->band = band;
if (!sband->n_channels || !sband->n_bitrates) {
WARN_ON(1);
if (WARN_ON(!sband->n_channels || !sband->n_bitrates))
return -EINVAL;
/*
* Since we use a u32 for rate bitmaps in
* ieee80211_get_response_rate, we cannot
* have more than 32 legacy rates.
*/
if (WARN_ON(sband->n_bitrates > 32))
return -EINVAL;
}
for (i = 0; i < sband->n_channels; i++) {
sband->channels[i].orig_flags =
......
......@@ -9,7 +9,7 @@
struct ieee80211_rate *
ieee80211_get_response_rate(struct ieee80211_supported_band *sband,
u64 basic_rates, int bitrate)
u32 basic_rates, int bitrate)
{
struct ieee80211_rate *result = &sband->bitrates[0];
int i;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册