staging: rtl8192e: Make structs const, move prototypes to top

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rtl8192e/r8192E.h

@@ -1468,7 +1468,6 @@ typedef	union _AC_PARAM{
 
 #endif
 bool init_firmware(struct net_device *dev);
-void rtl819xE_tx_cmd(struct net_device *dev, struct sk_buff *skb);
 short rtl8192_tx(struct net_device *dev, struct sk_buff* skb);
 u32 read_cam(struct net_device *dev, u8 addr);
 void write_cam(struct net_device *dev, u8 addr, u32 data);
@@ -1505,7 +1504,7 @@ void rtl8187_set_rxconf(struct net_device *dev);
 //short check_nic_enough_desc(struct net_device *dev, priority_t priority);
 void CamResetAllEntry(struct net_device* dev);
 void EnableHWSecurityConfig8192(struct net_device *dev);
-void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType, u8 *MacAddr, u8 DefaultKey, u32 *KeyContent );
+void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType, const u8 *MacAddr, u8 DefaultKey, u32 *KeyContent );
 void CamPrintDbgReg(struct net_device* dev);
 extern	void	dm_cck_txpower_adjust(struct net_device *dev,bool  binch14);
 extern void firmware_init_param(struct net_device *dev);

drivers/staging/rtl8192e/r8192E_core.c

@@ -97,7 +97,7 @@ u32 rt_global_debug_component = \
 	.vendor=(vend),.device=(dev),\
 	.subvendor=PCI_ANY_ID,.subdevice=PCI_ANY_ID
 #endif
-static struct pci_device_id rtl8192_pci_id_tbl[] __devinitdata = {
+static const struct pci_device_id rtl8192_pci_id_tbl[] __devinitdata = {
 #ifdef RTL8190P
 	/* Realtek */
 	/* Dlink */
@@ -163,6 +163,7 @@ static void rtl8192_irq_tx_tasklet(struct r8192_priv *priv);
 static void rtl8192_prepare_beacon(struct r8192_priv *priv);
 static irqreturn_t rtl8192_interrupt(int irq, void *netdev);
 static void rtl8192_try_wake_queue(struct net_device *dev, int pri);
+static void rtl819xE_tx_cmd(struct net_device *dev, struct sk_buff *skb);
 
 #ifdef ENABLE_DOT11D
 
@@ -947,7 +948,7 @@ void rtl8192_rx_enable(struct net_device *dev)
  *  HIGH_QUEUE     ===>                        7
  *  BEACON_QUEUE   ===>                        8
  *  */
-static u32 TX_DESC_BASE[] = {BKQDA, BEQDA, VIQDA, VOQDA, HCCAQDA, CQDA, MQDA, HQDA, BQDA};
+static const u32 TX_DESC_BASE[] = {BKQDA, BEQDA, VIQDA, VOQDA, HCCAQDA, CQDA, MQDA, HQDA, BQDA};
 void rtl8192_tx_enable(struct net_device *dev)
 {
     struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
@@ -1123,7 +1124,7 @@ static void rtl8192_reset(struct net_device *dev)
 }
 #endif
 
-static u16 rtl_rate[] = {10,20,55,110,60,90,120,180,240,360,480,540};
+static const u16 rtl_rate[] = {10,20,55,110,60,90,120,180,240,360,480,540};
 inline u16 rtl8192_rate2rate(short rate)
 {
 	if (rate >11) return 0;
@@ -1993,7 +1994,7 @@ static void rtl8192_update_beacon(struct work_struct * work)
 /*
 * background support to run QoS activate functionality
 */
-static int WDCAPARA_ADD[] = {EDCAPARA_BE,EDCAPARA_BK,EDCAPARA_VI,EDCAPARA_VO};
+static const int WDCAPARA_ADD[] = {EDCAPARA_BE,EDCAPARA_BK,EDCAPARA_VI,EDCAPARA_VO};
 static void rtl8192_qos_activate(struct work_struct * work)
 {
         struct r8192_priv *priv = container_of(work, struct r8192_priv, qos_activate);
@@ -4124,14 +4125,14 @@ static void CamRestoreAllEntry(struct net_device *dev)
 {
 	u8 EntryId = 0;
 	struct r8192_priv *priv = ieee80211_priv(dev);
-	u8*	MacAddr = priv->ieee80211->current_network.bssid;
+	const u8*	MacAddr = priv->ieee80211->current_network.bssid;
 
-	static u8	CAM_CONST_ADDR[4][6] = {
+	static const u8	CAM_CONST_ADDR[4][6] = {
 		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
 		{0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
 		{0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
 		{0x00, 0x00, 0x00, 0x00, 0x00, 0x03}};
-	static u8	CAM_CONST_BROAD[] =
+	static const u8	CAM_CONST_BROAD[] =
 		{0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
 
 	RT_TRACE(COMP_SEC, "CamRestoreAllEntry: \n");
@@ -6846,7 +6847,7 @@ void setKey(	struct net_device *dev,
 		u8 EntryNo,
 		u8 KeyIndex,
 		u16 KeyType,
-		u8 *MacAddr,
+		const u8 *MacAddr,
 		u8 DefaultKey,
 		u32 *KeyContent )
 {