提交 88187dfa 编写于 作者: M Michael Ellerman 提交者: Greg Kroah-Hartman

MSI: Replace pci_msi_quirk with calls to pci_no_msi()

I don't see any reason why we need pci_msi_quirk, quirk code can just
call pci_no_msi() instead.

Remove the check of pci_msi_quirk in msi_init(). This is safe as all
calls to msi_init() are protected by calls to pci_msi_supported(),
which checks pci_msi_enable, which is disabled by pci_no_msi().

The pci_disable_msi routines didn't check pci_msi_quirk, only
pci_msi_enable, but as far as I can see that was a bug not a feature.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 89298c7a
...@@ -5954,8 +5954,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) ...@@ -5954,8 +5954,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
* responding after a while. * responding after a while.
* *
* AMD believes this incompatibility is unique to the 5706, and * AMD believes this incompatibility is unique to the 5706, and
* prefers to locally disable MSI rather than globally disabling it * prefers to locally disable MSI rather than globally disabling it.
* using pci_msi_quirk.
*/ */
if (CHIP_NUM(bp) == CHIP_NUM_5706 && disable_msi == 0) { if (CHIP_NUM(bp) == CHIP_NUM_5706 && disable_msi == 0) {
struct pci_dev *amd_8132 = NULL; struct pci_dev *amd_8132 = NULL;
......
...@@ -170,13 +170,6 @@ static int msi_init(void) ...@@ -170,13 +170,6 @@ static int msi_init(void)
if (!status) if (!status)
return status; return status;
if (pci_msi_quirk) {
pci_msi_enable = 0;
printk(KERN_WARNING "PCI: MSI quirk detected. MSI disabled.\n");
status = -EINVAL;
return status;
}
status = msi_cache_init(); status = msi_cache_init();
if (status < 0) { if (status < 0) {
pci_msi_enable = 0; pci_msi_enable = 0;
......
...@@ -43,12 +43,8 @@ extern void pci_remove_legacy_files(struct pci_bus *bus); ...@@ -43,12 +43,8 @@ extern void pci_remove_legacy_files(struct pci_bus *bus);
/* Lock for read/write access to pci device and bus lists */ /* Lock for read/write access to pci device and bus lists */
extern struct rw_semaphore pci_bus_sem; extern struct rw_semaphore pci_bus_sem;
#ifdef CONFIG_PCI_MSI
extern int pci_msi_quirk;
#else
#define pci_msi_quirk 0
#endif
extern unsigned int pci_pm_d3_delay; extern unsigned int pci_pm_d3_delay;
#ifdef CONFIG_PCI_MSI #ifdef CONFIG_PCI_MSI
void disable_msi_mode(struct pci_dev *dev, int pos, int type); void disable_msi_mode(struct pci_dev *dev, int pos, int type);
void pci_no_msi(void); void pci_no_msi(void);
......
...@@ -1700,9 +1700,6 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, ...@@ -1700,9 +1700,6 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
quirk_nvidia_ck804_pcie_aer_ext_cap); quirk_nvidia_ck804_pcie_aer_ext_cap);
#ifdef CONFIG_PCI_MSI #ifdef CONFIG_PCI_MSI
/* To disable MSI globally */
int pci_msi_quirk;
/* The Serverworks PCI-X chipset does not support MSI. We cannot easily rely /* The Serverworks PCI-X chipset does not support MSI. We cannot easily rely
* on setting PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually * on setting PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
* some other busses controlled by the chipset even if Linux is not aware of it. * some other busses controlled by the chipset even if Linux is not aware of it.
...@@ -1711,8 +1708,8 @@ int pci_msi_quirk; ...@@ -1711,8 +1708,8 @@ int pci_msi_quirk;
*/ */
static void __init quirk_svw_msi(struct pci_dev *dev) static void __init quirk_svw_msi(struct pci_dev *dev)
{ {
pci_msi_quirk = 1; pci_no_msi();
printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n"); printk(KERN_WARNING "PCI: MSI quirk detected. MSI deactivated.\n");
} }
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_svw_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_svw_msi);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册