Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 880bcd4a 编写于 作者: K Kukjin Kim
浏览文件
操作

Merge branch 'topic/cleanup-s3c24xx' into next/cleanup-s3c24xx 

Conflicts:
	arch/arm/mach-s3c24xx/include/mach/system.h
上级 a5f17d1f 8c3d7c30
展开全部 隐藏空白更改
内联 并排
Showing with 700 addition and 864 deletion
arch/arm/Kconfig
浏览文件 @ 880bcd4a
......@@ -763,22 +763,21 @@ config ARCH_SA1100
help
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
select HAVE_CLK
select CLKDEV_LOOKUP
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
the Samsung SMDK2410 development board (and derivatives).
Note, the S3C2416 and the S3C2450 are so close that they even share
the same SoC ID code. This means that there is no separate machine
directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
(<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
Samsung SMDK2410 development board (and derivatives).
config ARCH_S3C64XX
bool "Samsung S3C64XX"
......@@ -1066,12 +1065,11 @@ source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-spear/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c24xx/Kconfig"
if ARCH_S3C24XX
source "arch/arm/mach-s3c2412/Kconfig"
source "arch/arm/mach-s3c2416/Kconfig"
source "arch/arm/mach-s3c2440/Kconfig"
source "arch/arm/mach-s3c2443/Kconfig"
endif
if ARCH_S3C64XX
......@@ -1588,7 +1586,7 @@ source kernel/Kconfig.preempt
config HZ
int
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
ARCH_S5PV210 || ARCH_EXYNOS4
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
......@@ -2114,7 +2112,7 @@ config CPU_FREQ_S3C
config CPU_FREQ_S3C24XX
bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL
select CPU_FREQ_S3C
help
This enables the CPUfreq driver for the Samsung S3C24XX family
......
arch/arm/Makefile
浏览文件 @ 880bcd4a
......@@ -174,7 +174,7 @@ machine-$(CONFIG_ARCH_PRIMA2) := prima2
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2412 s3c2416 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C24XX) := s3c24xx s3c2412 s3c2440
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
......
arch/arm/boot/compressed/head.S
浏览文件 @ 880bcd4a
......@@ -58,7 +58,7 @@
add \rb, \rb, #0x00010000 @ Ser1
#endif
.endm
#elif defined(CONFIG_ARCH_S3C2410)
#elif defined(CONFIG_ARCH_S3C24XX)
.macro loadsp, rb, tmp
mov \rb, #0x50000000
add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
......
arch/arm/configs/mini2440_defconfig
浏览文件 @ 880bcd4a
......@@ -13,7 +13,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_ARCH_S3C2410=y
CONFIG_ARCH_S3C24XX=y
CONFIG_S3C_ADC=y
CONFIG_S3C24XX_PWM=y
CONFIG_MACH_MINI2440=y
......
arch/arm/configs/s3c2410_defconfig
浏览文件 @ 880bcd4a
......@@ -3,40 +3,47 @@ CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_S3C2410=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_ARCH_S3C24XX=y
CONFIG_S3C_BOOT_ERROR_RESET=y
CONFIG_S3C_ADC=y
CONFIG_S3C24XX_PWM=y
CONFIG_ARCH_SMDK2410=y
CONFIG_CPU_S3C2412=y
CONFIG_CPU_S3C2416=y
CONFIG_CPU_S3C2440=y
CONFIG_CPU_S3C2442=y
CONFIG_CPU_S3C2443=y
CONFIG_MACH_AML_M5900=y
CONFIG_ARCH_BAST=y
CONFIG_ARCH_H1940=y
CONFIG_MACH_N30=y
CONFIG_ARCH_BAST=y
CONFIG_MACH_OTOM=y
CONFIG_MACH_AML_M5900=y
CONFIG_MACH_QT2410=y
CONFIG_ARCH_SMDK2410=y
CONFIG_MACH_TCT_HAMMER=y
CONFIG_MACH_VR1000=y
CONFIG_MACH_QT2410=y
CONFIG_MACH_JIVE=y
CONFIG_MACH_SMDK2412=y
CONFIG_MACH_VSTMS=y
CONFIG_MACH_SMDK2416=y
CONFIG_MACH_ANUBIS=y
CONFIG_MACH_NEO1973_GTA02=y
CONFIG_MACH_AT2440EVB=y
CONFIG_MACH_MINI2440=y
CONFIG_MACH_NEXCODER_2440=y
CONFIG_MACH_OSIRIS=y
CONFIG_MACH_OSIRIS_DVS=m
CONFIG_MACH_RX3715=y
CONFIG_ARCH_S3C2440=y
CONFIG_MACH_NEXCODER_2440=y
CONFIG_SMDK2440_CPU2442=y
CONFIG_MACH_AT2440EVB=y
CONFIG_MACH_MINI2440=y
CONFIG_MACH_NEO1973_GTA02=y
CONFIG_MACH_RX1950=y
CONFIG_SMDK2440_CPU2442=y
CONFIG_MACH_SMDK2443=y
# CONFIG_ARM_THUMB is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
......@@ -45,7 +52,6 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
CONFIG_BINFMT_AOUT=y
CONFIG_PM=y
CONFIG_APM_EMULATION=m
CONFIG_NET=y
CONFIG_PACKET=y
......@@ -58,7 +64,6 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
......@@ -80,7 +85,6 @@ CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
......@@ -138,7 +142,6 @@ CONFIG_IP_VS=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
......@@ -150,7 +153,6 @@ CONFIG_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
......@@ -177,8 +179,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
......@@ -199,7 +199,6 @@ CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_CMDLINE_PARTS=y
......@@ -221,9 +220,6 @@ CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_ATA_OVER_ETH=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_93CX6=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=m
......@@ -240,7 +236,6 @@ CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_DM9000=y
CONFIG_INPUT_EVDEV=y
CONFIG_MOUSE_APPLETOUCH=m
......@@ -274,7 +269,6 @@ CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
......@@ -300,7 +294,6 @@ CONFIG_I2C_SIMTEC=y
CONFIG_SPI=y
CONFIG_SPI_GPIO=m
CONFIG_SPI_S3C24XX=m
CONFIG_SPI_S3C24XX_GPIO=m
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m
CONFIG_SENSORS_LM75=m
......@@ -315,7 +308,6 @@ CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_S3C2410=y
CONFIG_FB_SM501=y
CONFIG_BACKLIGHT_PWM=m
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SND=y
......@@ -330,10 +322,6 @@ CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_SOC=y
CONFIG_SND_S3C24XX_SOC=y
CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
......@@ -387,9 +375,7 @@ CONFIG_MMC_TEST=m
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SPI=m
CONFIG_MMC_S3C=y
CONFIG_LEDS_CLASS=m
CONFIG_LEDS_S3C24XX=m
CONFIG_LEDS_H1940=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_PCA955X=m
......@@ -410,8 +396,6 @@ CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_INOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_ISO9660_FS=y
......@@ -436,9 +420,6 @@ CONFIG_NFSD=m
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_CIFS=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
......@@ -481,9 +462,7 @@ CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
arch/arm/configs/tct_hammer_defconfig
浏览文件 @ 880bcd4a
......@@ -14,7 +14,7 @@ CONFIG_SLOB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_S3C2410=y
CONFIG_ARCH_S3C24XX=y
CONFIG_MACH_TCT_HAMMER=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
......
arch/arm/mach-s3c2410/Kconfig
浏览文件 @ 880bcd4a
......@@ -2,42 +2,6 @@
#
# Licensed under GPLv2
config CPU_S3C2410
bool
depends on ARCH_S3C2410
select CPU_ARM920T
select S3C2410_CLOCK
select CPU_LLSERIAL_S3C2410
select S3C2410_PM if PM
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
config CPU_S3C2410_DMA
bool
depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
default y if CPU_S3C2410 || CPU_S3C2442
help
DMA device selection for S3C2410 and compatible CPUs
config S3C2410_PM
bool
help
Power Management code common to S3C2410 and better
config SIMTEC_NOR
bool
help
Internal node to specify machine has simtec NOR mapping
config MACH_BAST_IDE
bool
select HAVE_PATA_PLATFORM
help
Internal node for machines with an BAST style IDE
interface
# cpu frequency scaling support
config S3C2410_CPUFREQ
......@@ -54,121 +18,3 @@ config S3C2410_PLLTABLE
help
Select the PLL table for the S3C2410
menu "S3C2410 Machines"
config ARCH_SMDK2410
bool "SMDK2410/A9M2410"
select CPU_S3C2410
select MACH_SMDK
help
Say Y here if you are using the SMDK2410 or the derived module A9M2410
<http://www.fsforth.de>
config ARCH_H1940
bool "IPAQ H1940"
select CPU_S3C2410
select PM_H1940 if PM
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
select S3C2410_SETUP_TS
help
Say Y here if you are using the HP IPAQ H1940
config H1940BT
tristate "Control the state of H1940 bluetooth chip"
depends on ARCH_H1940
select RFKILL
help
This is a simple driver that is able to control
the state of built in bluetooth chip on h1940.
config PM_H1940
bool
help
Internal node for H1940 and related PM
config MACH_N30
bool "Acer N30 family"
select CPU_S3C2410
select MACH_N35
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you want suppt for the Acer N30, Acer N35,
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
config MACH_N35
bool
help
Internal node in order to enable support for Acer N35 if Acer N30 is
selected.
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select CPU_S3C2410
select S3C2410_IOTIMING if S3C2410_CPUFREQ
select PM_SIMTEC if PM
select SIMTEC_NOR
select MACH_BAST_IDE
select S3C24XX_DCLK
select ISA
select S3C_DEV_HWMON
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST)
config MACH_OTOM
bool "NexVision OTOM Board"
select CPU_S3C2410
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the Nex Vision OTOM board
config MACH_AML_M5900
bool "AML M5900 Series"
select CPU_S3C2410
select PM_SIMTEC if PM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the American Microsystems M5900 Series
<http://www.amltd.com>
config BAST_PC104_IRQ
bool "BAST PC104 IRQ support"
depends on ARCH_BAST
default y
help
Say Y here to enable the PC104 IRQ routing on the
Simtec BAST (EB2410ITX)
config MACH_TCT_HAMMER
bool "TCT Hammer Board"
select CPU_S3C2410
select S3C_DEV_USB_HOST
help
Say Y here if you are using the TinCanTools Hammer Board
<http://www.tincantools.com>
config MACH_VR1000
bool "Thorcom VR1000"
select PM_SIMTEC if PM
select S3C24XX_DCLK
select SIMTEC_NOR
select MACH_BAST_IDE
select CPU_S3C2410
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Thorcom VR1000 board.
config MACH_QT2410
bool "QT2410"
select CPU_S3C2410
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the Armzone QT2410
endmenu
arch/arm/mach-s3c2410/Makefile
浏览文件 @ 880bcd4a
......@@ -9,32 +9,6 @@ obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o
obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
# Machine support
obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
obj-$(CONFIG_H1940BT) += h1940-bluetooth.o
obj-$(CONFIG_PM_H1940) += pm-h1940.o
obj-$(CONFIG_MACH_N30) += mach-n30.o
obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
obj-$(CONFIG_MACH_OTOM) += mach-otom.o
obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o
obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o
obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o
# Common bits of machine support
obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
# machine additions
obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o
arch/arm/mach-s3c2412/Kconfig
浏览文件 @ 880bcd4a
......@@ -2,41 +2,6 @@
#
# Licensed under GPLv2
config CPU_S3C2412
bool
depends on ARCH_S3C2410
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
select S3C2412_PM if PM
select S3C2412_DMA if S3C2410_DMA
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
config CPU_S3C2412_ONLY
bool
depends on ARCH_S3C2410 && !CPU_S3C2410 && \
!CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
!CPU_S3C2443 && CPU_S3C2412
default y if CPU_S3C2412
config S3C2412_DMA
bool
depends on CPU_S3C2412
help
Internal config node for S3C2412 DMA support
config S3C2412_PM
bool
select S3C2412_PM_SLEEP
help
Internal config node to apply S3C2412 power management
config S3C2412_PM_SLEEP
bool
help
Internal config node to apply sleep for S3C2412 power management.
Can be selected by another SoCs with similar sleep procedure.
# Note, the S3C2412 IOtiming support is in plat-s3c24xx
config S3C2412_CPUFREQ
......@@ -46,53 +11,3 @@ config S3C2412_CPUFREQ
default y
help
CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
menu "S3C2412 Machines"
config MACH_JIVE
bool "Logitech Jive"
select CPU_S3C2412
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the Logitech Jive.
config MACH_JIVE_SHOW_BOOTLOADER
bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)"
depends on MACH_JIVE && EXPERIMENTAL
config MACH_SMDK2413
bool "SMDK2413"
select CPU_S3C2412
select MACH_S3C2413
select MACH_SMDK
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using an SMDK2413
config MACH_S3C2413
bool
help
Internal node for S3C2413 version of SMDK2413, so that
machine_is_s3c2413() will work when MACH_SMDK2413 is
selected
config MACH_SMDK2412
bool "SMDK2412"
select MACH_SMDK2413
help
Say Y here if you are using an SMDK2412
Note, this shares support with SMDK2413, so will automatically
select MACH_SMDK2413.
config MACH_VSTMS
bool "VMSTMS"
select CPU_S3C2412
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using an VSTMS board
endmenu
arch/arm/mach-s3c2412/Makefile
浏览文件 @ 880bcd4a
......@@ -9,16 +9,4 @@ obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
obj-$(CONFIG_CPU_S3C2412) += irq.o
obj-$(CONFIG_CPU_S3C2412) += clock.o
obj-$(CONFIG_S3C2412_DMA) += dma.o
obj-$(CONFIG_S3C2412_PM) += pm.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o
obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o
# Machine support
obj-$(CONFIG_MACH_JIVE) += mach-jive.o
obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
arch/arm/mach-s3c2416/Kconfig
浏览文件 @ 880bcd4a
......@@ -7,54 +7,8 @@
# note, this also supports the S3C2450 which is so similar it has the same
# ID code as the S3C2416.
config CPU_S3C2416
bool
depends on ARCH_S3C2410
select CPU_ARM926T
select S3C2416_DMA if S3C2410_DMA
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
select S3C2443_CLOCK
help
Support for the S3C2416 SoC from the S3C24XX line
config S3C2416_DMA
bool
depends on CPU_S3C2416
help
Internal config node for S3C2416 DMA support
config S3C2416_PM
bool
select S3C2412_PM_SLEEP
help
Internal config node to apply S3C2416 power management
config S3C2416_SETUP_SDHCI
bool
select S3C2416_SETUP_SDHCI_GPIO
help
Internal helper functions for S3C2416 based SDHCI systems
config S3C2416_SETUP_SDHCI_GPIO
bool
help
Common setup code for SDHCI gpio.
menu "S3C2416 Machines"
config MACH_SMDK2416
bool "SMDK2416"
select CPU_S3C2416
select MACH_SMDK
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
select S3C2416_SETUP_SDHCI
select S3C2416_PM if PM
help
Say Y here if you are using an SMDK2416
endmenu
arch/arm/mach-s3c2416/Makefile
浏览文件 @ 880bcd4a
......@@ -9,14 +9,4 @@ obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock.o
obj-$(CONFIG_CPU_S3C2416) += irq.o
obj-$(CONFIG_S3C2416_PM) += pm.o
#obj-$(CONFIG_S3C2416_DMA) += dma.o
# Device setup
obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
# Machine support
obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
arch/arm/mach-s3c2440/Kconfig
浏览文件 @ 880bcd4a
......@@ -2,35 +2,6 @@
#
# Licensed under GPLv2
config CPU_S3C2440
bool
select CPU_ARM920T
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2440_DMA if S3C2410_DMA
select CPU_S3C244X
select CPU_LLSERIAL_S3C2440
help
Support for S3C2440 Samsung Mobile CPU based systems.
config CPU_S3C2442
bool
select CPU_ARM920T
select S3C2410_CLOCK
select S3C2410_PM if PM
select CPU_S3C244X
select CPU_LLSERIAL_S3C2440
help
Support for S3C2442 Samsung Mobile CPU based systems.
config CPU_S3C244X
bool
depends on CPU_S3C2440 || CPU_S3C2442
help
Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
config S3C2440_CPUFREQ
bool "S3C2440/S3C2442 CPU Frequency scaling support"
depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
......@@ -64,139 +35,3 @@ config S3C2440_PLL_16934400
default y if CPU_FREQ_S3C24XX_PLL
help
PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
config S3C2440_DMA
bool
depends on CPU_S3C2440
help
Support for S3C2440 specific DMA code5A
menu "S3C2440 and S3C2442 Machines"
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select CPU_S3C2440
select S3C24XX_DCLK
select PM_SIMTEC if PM
select HAVE_PATA_PLATFORM
select S3C24XX_GPIO_EXTRA64
select S3C2440_XTAL_12000000
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics ANUBIS
development system
config MACH_NEO1973_GTA02
bool "Openmoko GTA02 / Freerunner phone"
select CPU_S3C2442
select MFD_PCF50633
select PCF50633_GPIO
select I2C
select POWER_SUPPLY
select MACH_NEO1973
select S3C2410_PWM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select CPU_S3C2440
select S3C24XX_DCLK
select PM_SIMTEC if PM
select S3C24XX_GPIO_EXTRA128
select S3C2440_XTAL_12000000
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
config MACH_OSIRIS_DVS
tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
depends on MACH_OSIRIS
select TPS65010
help
Say Y/M here if you want to have dynamic voltage scaling support
on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
The DVS driver alters the voltage supplied to the ARM core
depending on the frequency it is running at. The driver itself
does not do any of the frequency alteration, which is left up
to the cpufreq driver.
config MACH_RX3715
bool "HP iPAQ rx3715"
select CPU_S3C2440
select S3C2440_XTAL_16934400
select PM_H1940 if PM
select S3C_DEV_NAND
help
Say Y here if you are using the HP iPAQ rx3715.
config ARCH_S3C2440
bool "SMDK2440"
select CPU_S3C2440
select S3C2440_XTAL_16934400
select MACH_SMDK
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the SMDK2440.
config MACH_NEXCODER_2440
bool "NexVision NEXCODER 2440 Light Board"
select CPU_S3C2440
select S3C2440_XTAL_12000000
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
config SMDK2440_CPU2440
bool "SMDK2440 with S3C2440 CPU module"
default y if ARCH_S3C2440
select S3C2440_XTAL_16934400
select CPU_S3C2440
config SMDK2440_CPU2442
bool "SMDM2440 with S3C2442 CPU module"
select CPU_S3C2442
config MACH_AT2440EVB
bool "Avantech AT2440EVB development board"
select CPU_S3C2440
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the AT2440EVB development board
config MACH_MINI2440
bool "MINI2440 development board"
select CPU_S3C2440
select EEPROM_AT24
select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGER
select LEDS_TRIGGER_BACKLIGHT
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
available via various sources. It can come with a 3.5" or 7" touch LCD.
config MACH_RX1950
bool "HP iPAQ rx1950"
select CPU_S3C2442
select S3C24XX_DCLK
select PM_H1940 if PM
select I2C
select S3C2410_PWM
select S3C_DEV_NAND
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
help
Say Y here if you're using HP iPAQ rx1950
endmenu
arch/arm/mach-s3c2440/Makefile
浏览文件 @ 880bcd4a
......@@ -9,33 +9,9 @@ obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C2440) += dsc.o
obj-$(CONFIG_CPU_S3C2440) += irq.o
obj-$(CONFIG_CPU_S3C2440) += clock.o
obj-$(CONFIG_S3C2440_DMA) += dma.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
# Machine support
obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
# extra machine support
obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
arch/arm/mach-s3c2440/common.h 已删除 100644 → 0
浏览文件 @ a5f17d1f
/*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Common Header for S3C2440 machines
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
#define __ARCH_ARM_MACH_S3C2440_COMMON_H
void s3c2440_restart(char mode, const char *cmd);
#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */
arch/arm/mach-s3c2443/Kconfig 已删除 100644 → 0
浏览文件 @ a5f17d1f
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
config CPU_S3C2443
bool
depends on ARCH_S3C2410
select CPU_ARM920T
select S3C2443_DMA if S3C2410_DMA
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
select S3C2443_CLOCK
help
Support for the S3C2443 SoC from the S3C24XX line
config S3C2443_DMA
bool
depends on CPU_S3C2443
help
Internal config node for S3C2443 DMA support
menu "S3C2443 Machines"
config MACH_SMDK2443
bool "SMDK2443"
select CPU_S3C2443
select MACH_SMDK
select S3C_DEV_HSMMC1
help
Say Y here if you are using an SMDK2443
endmenu
arch/arm/mach-s3c2443/Makefile 已删除 100644 → 0
浏览文件 @ a5f17d1f
# arch/arm/mach-s3c2443/Makefile
#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
obj-y :=
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_CPU_S3C2443) += s3c2443.o
obj-$(CONFIG_CPU_S3C2443) += irq.o
obj-$(CONFIG_CPU_S3C2443) += clock.o
obj-$(CONFIG_S3C2443_DMA) += dma.o
# Machine support
obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o
arch/arm/mach-s3c24xx/Kconfig 0 → 100644
浏览文件 @ 880bcd4a
# arch/arm/mach-s3c24xx/Kconfig
#
# Copyright (c) 2012 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
if ARCH_S3C24XX
menu "SAMSUNG S3C24XX SoCs Support"
comment "S3C24XX SoCs"
config CPU_S3C2410
bool "SAMSUNG S3C2410"
default y
select CPU_ARM920T
select S3C2410_CLOCK
select CPU_LLSERIAL_S3C2410
select S3C2410_PM if PM
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
config CPU_S3C2412
bool "SAMSUNG S3C2412"
depends on ARCH_S3C24XX
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
select S3C2412_PM if PM
select S3C2412_DMA if S3C24XX_DMA
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
config CPU_S3C2416
bool "SAMSUNG S3C2416/S3C2450"
depends on ARCH_S3C24XX
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
select S3C2443_COMMON
select S3C2416_DMA if S3C24XX_DMA
select S3C2416_PM if PM
help
Support for the S3C2416 SoC from the S3C24XX line
config CPU_S3C2440
bool "SAMSUNG S3C2440"
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2440_DMA if S3C24XX_DMA
help
Support for S3C2440 Samsung Mobile CPU based systems.
config CPU_S3C2442
bool "SAMSUNG S3C2442"
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
help
Support for S3C2442 Samsung Mobile CPU based systems.
config CPU_S3C244X
def_bool y
depends on CPU_S3C2440 || CPU_S3C2442
config CPU_S3C2443
bool "SAMSUNG S3C2443"
depends on ARCH_S3C24XX
select CPU_ARM920T
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
help
Support for the S3C2443 SoC from the S3C24XX line
if CPU_S3C2410
config S3C2410_DMA
bool
depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
default y if CPU_S3C2410 || CPU_S3C2442
help
DMA device selection for S3C2410 and compatible CPUs
config S3C2410_PM
bool
help
Power Management code common to S3C2410 and better
config SIMTEC_NOR
bool
help
Internal node to specify machine has simtec NOR mapping
config MACH_BAST_IDE
bool
select HAVE_PATA_PLATFORM
help
Internal node for machines with an BAST style IDE
interface
comment "S3C2410 Boards"
#
# The "S3C2410 Boards" list is ordered alphabetically by option text.
# (without ARCH_ or MACH_)
#
config MACH_AML_M5900
bool "AML M5900 Series"
select PM_SIMTEC if PM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the American Microsystems M5900 Series
<http://www.amltd.com>
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select S3C2410_IOTIMING if S3C2410_CPUFREQ
select PM_SIMTEC if PM
select SIMTEC_NOR
select MACH_BAST_IDE
select S3C24XX_DCLK
select ISA
select S3C_DEV_HWMON
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST)
config BAST_PC104_IRQ
bool "BAST PC104 IRQ support"
depends on ARCH_BAST
default y
help
Say Y here to enable the PC104 IRQ routing on the
Simtec BAST (EB2410ITX)
config ARCH_H1940
bool "IPAQ H1940"
select PM_H1940 if PM
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
select S3C2410_SETUP_TS
help
Say Y here if you are using the HP IPAQ H1940
config H1940BT
tristate "Control the state of H1940 bluetooth chip"
depends on ARCH_H1940
select RFKILL
help
This is a simple driver that is able to control
the state of built in bluetooth chip on h1940.
config PM_H1940
bool
help
Internal node for H1940 and related PM
config MACH_N30
bool "Acer N30 family"
select MACH_N35
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you want suppt for the Acer N30, Acer N35,
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
config MACH_OTOM
bool "NexVision OTOM Board"
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the Nex Vision OTOM board
config MACH_QT2410
bool "QT2410"
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the Armzone QT2410
config ARCH_SMDK2410
bool "SMDK2410/A9M2410"
select MACH_SMDK
help
Say Y here if you are using the SMDK2410 or the derived module A9M2410
<http://www.fsforth.de>
config MACH_TCT_HAMMER
bool "TCT Hammer Board"
select S3C_DEV_USB_HOST
help
Say Y here if you are using the TinCanTools Hammer Board
<http://www.tincantools.com>
config MACH_VR1000
bool "Thorcom VR1000"
select PM_SIMTEC if PM
select S3C24XX_DCLK
select SIMTEC_NOR
select MACH_BAST_IDE
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Thorcom VR1000 board.
endif # CPU_S3C2410
config S3C2412_PM_SLEEP
bool
help
Internal config node to apply sleep for S3C2412 power management.
Can be selected by another SoCs such as S3C2416 with similar
sleep procedure.
if CPU_S3C2412
config CPU_S3C2412_ONLY
bool
depends on ARCH_S3C24XX && !CPU_S3C2410 && \
!CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
!CPU_S3C2443 && CPU_S3C2412
default y
config S3C2412_DMA
bool
help
Internal config node for S3C2412 DMA support
config S3C2412_PM
bool
help
Internal config node to apply S3C2412 power management
comment "S3C2412 Boards"
#
# The "S3C2412 Boards" list is ordered alphabetically by option text.
# (without ARCH_ or MACH_)
#
config MACH_JIVE
bool "Logitech Jive"
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the Logitech Jive.
config MACH_JIVE_SHOW_BOOTLOADER
bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)"
depends on MACH_JIVE && EXPERIMENTAL
config MACH_S3C2413
bool
help
Internal node for S3C2413 version of SMDK2413, so that
machine_is_s3c2413() will work when MACH_SMDK2413 is
selected
config MACH_SMDK2412
bool "SMDK2412"
select MACH_SMDK2413
help
Say Y here if you are using an SMDK2412
Note, this shares support with SMDK2413, so will automatically
select MACH_SMDK2413.
config MACH_SMDK2413
bool "SMDK2413"
select MACH_S3C2413
select MACH_SMDK
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using an SMDK2413
config MACH_VSTMS
bool "VMSTMS"
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using an VSTMS board
endif # CPU_S3C2412
if CPU_S3C2416
config S3C2416_PM
bool
select S3C2412_PM_SLEEP
help
Internal config node to apply S3C2416 power management
config S3C2416_SETUP_SDHCI
bool
select S3C2416_SETUP_SDHCI_GPIO
help
Internal helper functions for S3C2416 based SDHCI systems
config S3C2416_SETUP_SDHCI_GPIO
bool
help
Common setup code for SDHCI gpio.
comment "S3C2416 Boards"
config MACH_SMDK2416
bool "SMDK2416"
select MACH_SMDK
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
select S3C2416_SETUP_SDHCI
help
Say Y here if you are using an SMDK2416
endif # CPU_S3C2416
if CPU_S3C2440
config S3C2440_DMA
bool
help
Support for S3C2440 specific DMA code5A
comment "S3C2440 Boards"
#
# The "S3C2440 Boards" list is ordered alphabetically by option text.
# (without ARCH_ or MACH_)
#
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
select S3C24XX_DCLK
select PM_SIMTEC if PM
select HAVE_PATA_PLATFORM
select S3C24XX_GPIO_EXTRA64
select S3C2440_XTAL_12000000
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics ANUBIS
development system
config MACH_AT2440EVB
bool "Avantech AT2440EVB development board"
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the AT2440EVB development board
config MACH_MINI2440
bool "MINI2440 development board"
select EEPROM_AT24
select NEW_LEDS
select LEDS_CLASS
select LEDS_TRIGGER
select LEDS_TRIGGER_BACKLIGHT
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
help
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
available via various sources. It can come with a 3.5" or 7" touch LCD.
config MACH_NEXCODER_2440
bool "NexVision NEXCODER 2440 Light Board"
select S3C2440_XTAL_12000000
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select S3C24XX_DCLK
select PM_SIMTEC if PM
select S3C24XX_GPIO_EXTRA128
select S3C2440_XTAL_12000000
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
config MACH_OSIRIS_DVS
tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
depends on MACH_OSIRIS
select TPS65010
help
Say Y/M here if you want to have dynamic voltage scaling support
on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
The DVS driver alters the voltage supplied to the ARM core
depending on the frequency it is running at. The driver itself
does not do any of the frequency alteration, which is left up
to the cpufreq driver.
config MACH_RX3715
bool "HP iPAQ rx3715"
select S3C2440_XTAL_16934400
select PM_H1940 if PM
select S3C_DEV_NAND
help
Say Y here if you are using the HP iPAQ rx3715.
config ARCH_S3C2440
bool "SMDK2440"
select S3C2440_XTAL_16934400
select MACH_SMDK
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you are using the SMDK2440.
config SMDK2440_CPU2440
bool "SMDK2440 with S3C2440 CPU module"
default y if ARCH_S3C2440
select S3C2440_XTAL_16934400
endif # CPU_S3C2440
if CPU_S3C2442
comment "S3C2442 Boards"
#
# The "S3C2442 Boards" list is ordered alphabetically by option text.
# (without ARCH_ or MACH_)
#
config MACH_NEO1973_GTA02
bool "Openmoko GTA02 / Freerunner phone"
select MFD_PCF50633
select PCF50633_GPIO
select I2C
select POWER_SUPPLY
select MACH_NEO1973
select S3C2410_PWM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
config MACH_RX1950
bool "HP iPAQ rx1950"
select S3C24XX_DCLK
select PM_H1940 if PM
select I2C
select S3C2410_PWM
select S3C_DEV_NAND
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C2440_XTAL_16934400
help
Say Y here if you're using HP iPAQ rx1950
config SMDK2440_CPU2442
bool "SMDM2440 with S3C2442 CPU module"
endif # CPU_S3C2440
if CPU_S3C2443 || CPU_S3C2416
config S3C2443_COMMON
bool
help
Common code for the S3C2443 and similar processors, which includes
the S3C2416 and S3C2450.
endif # CPU_S3C2443 || CPU_S3C2416
if CPU_S3C2443
config S3C2443_DMA
bool
help
Internal config node for S3C2443 DMA support
comment "S3C2443 Boards"
config MACH_SMDK2443
bool "SMDK2443"
select MACH_SMDK
select S3C_DEV_HSMMC1
help
Say Y here if you are using an SMDK2443
endif # CPU_S3C2443
endmenu # SAMSUNG S3C24XX SoCs Support
endif # ARCH_S3C24XX
arch/arm/mach-s3c24xx/Makefile 0 → 100644
浏览文件 @ 880bcd4a
# arch/arm/mach-s3c24xx/Makefile
#
# Copyright (c) 2012 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
obj-y :=
obj-m :=
obj-n :=
obj- :=
# core
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o
obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o irq-s3c2416.o clock-s3c2416.o
obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_CPU_S3C2443) += s3c2443.o irq-s3c2443.o clock-s3c2443.o
obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o
# common code
obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o
#
# machine support
# following is ordered alphabetically by option text.
#
obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o
obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
obj-$(CONFIG_H1940BT) += h1940-bluetooth.o
obj-$(CONFIG_PM_H1940) += pm-h1940.o
obj-$(CONFIG_MACH_N30) += mach-n30.o
obj-$(CONFIG_MACH_OTOM) += mach-otom.o
obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o
obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o
obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
obj-$(CONFIG_MACH_JIVE) += mach-jive.o
obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o
# common bits of machine support
obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
# machine additions
obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o
obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
# device setup
obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
arch/arm/mach-s3c2416/clock.c → arch/arm/mach-s3c24xx/clock-s3c2416.c
浏览文件 @ 880bcd4a
......@@ -15,7 +15,6 @@
#include <linux/clk.h>
#include <plat/s3c2416.h>
#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
......
arch/arm/plat-s3c24xx/s3c2443-clock.c → arch/arm/mach-s3c24xx/common-s3c2443.c
浏览文件 @ 880bcd4a
/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c
/*
* Common code for SoCs starting with the S3C2443
*
* Copyright (c) 2007, 2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2443 Clock control suport - common code
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/init.h>
......@@ -12,7 +21,6 @@
#include <mach/regs-s3c2443-clock.h>
#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
#include <plat/cpu.h>
......@@ -553,7 +561,7 @@ void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
s3c24xx_setup_clocks(fclk, hclk, pclk);
printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
(mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
(mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
print_mhz(pll), print_mhz(fclk),
print_mhz(hclk), print_mhz(pclk));
......@@ -568,7 +576,7 @@ void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
}
printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
(epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
(epllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
print_mhz(clk_get_rate(&clk_epll)),
print_mhz(clk_get_rate(&clk_usb_bus)));
}
......
arch/arm/mach-s3c2410/common.h → arch/arm/mach-s3c24xx/common.h
浏览文件 @ 880bcd4a
......@@ -12,6 +12,12 @@
#ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H
#define __ARCH_ARM_MACH_S3C2410_COMMON_H
#ifdef CONFIG_CPU_S3C2410
void s3c2410_restart(char mode, const char *cmd);
#endif
#ifdef CONFIG_CPU_S3C2440
void s3c2440_restart(char mode, const char *cmd);
#endif
#endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */
arch/arm/mach-s3c2440/mach-gta02.c → arch/arm/mach-s3c24xx/mach-gta02.c
浏览文件 @ 880bcd4a
......@@ -38,6 +38,7 @@
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/spi/spi.h>
#include <linux/spi/s3c24xx.h>
#include <linux/mmc/host.h>
......@@ -73,7 +74,6 @@
#include <mach/regs-gpioj.h>
#include <mach/fb.h>
#include <mach/spi.h>
#include <plat/usb-control.h>
#include <mach/regs-mem.h>
#include <mach/hardware.h>
......
arch/arm/plat-s3c24xx/Kconfig
浏览文件 @ 880bcd4a
此差异已折叠。
arch/arm/plat-s3c24xx/Makefile
浏览文件 @ 880bcd4a
此差异已折叠。
arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c 已删除 100644 → 0
浏览文件 @ a5f17d1f
此差异已折叠。
arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c 已删除 100644 → 0
浏览文件 @ a5f17d1f
此差异已折叠。
arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c 已删除 100644 → 0
浏览文件 @ a5f17d1f
此差异已折叠。
arch/arm/plat-samsung/Kconfig
浏览文件 @ 880bcd4a
此差异已折叠。
drivers/input/touchscreen/Kconfig
浏览文件 @ 880bcd4a
此差异已折叠。
drivers/leds/Kconfig
浏览文件 @ 880bcd4a
此差异已折叠。
drivers/mmc/host/Kconfig
浏览文件 @ 880bcd4a
此差异已折叠。
drivers/mtd/nand/Kconfig
浏览文件 @ 880bcd4a
此差异已折叠。
drivers/rtc/Kconfig
浏览文件 @ 880bcd4a
此差异已折叠。
drivers/spi/Kconfig
浏览文件 @ 880bcd4a
此差异已折叠。
drivers/spi/spi-s3c24xx.c
浏览文件 @ 880bcd4a
此差异已折叠。
drivers/usb/Kconfig
浏览文件 @ 880bcd4a
此差异已折叠。
drivers/usb/gadget/Kconfig
浏览文件 @ 880bcd4a
此差异已折叠。
drivers/usb/host/ohci-hcd.c
浏览文件 @ 880bcd4a
此差异已折叠。
drivers/video/Kconfig
浏览文件 @ 880bcd4a
此差异已折叠。
drivers/watchdog/Kconfig
浏览文件 @ 880bcd4a
此差异已折叠。
sound/soc/samsung/Kconfig
浏览文件 @ 880bcd4a
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或