libata: Add support for queued DSM TRIM

Some new SSDs support the queued version of the DSM TRIM command.
Let the driver use the new command if supported.
Signed-off-by: NMarc Carino <marc.ceeeee@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

drivers/ata/libata-scsi.c

@@ -3097,12 +3097,25 @@ static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
 	buf = page_address(sg_page(scsi_sglist(scmd)));
 	size = ata_set_lba_range_entries(buf, 512, block, n_block);
 
-	tf->protocol = ATA_PROT_DMA;
-	tf->hob_feature = 0;
-	tf->feature = ATA_DSM_TRIM;
-	tf->hob_nsect = (size / 512) >> 8;
-	tf->nsect = size / 512;
-	tf->command = ATA_CMD_DSM;
+	if (ata_ncq_enabled(dev) && ata_fpdma_dsm_supported(dev)) {
+		/* Newer devices support queued TRIM commands */
+		tf->protocol = ATA_PROT_NCQ;
+		tf->command = ATA_CMD_FPDMA_SEND;
+		tf->hob_nsect = ATA_SUBCMD_FPDMA_SEND_DSM & 0x1f;
+		tf->nsect = qc->tag << 3;
+		tf->hob_feature = (size / 512) >> 8;
+		tf->feature = size / 512;
+
+		tf->auxiliary = 1;
+	} else {
+		tf->protocol = ATA_PROT_DMA;
+		tf->hob_feature = 0;
+		tf->feature = ATA_DSM_TRIM;
+		tf->hob_nsect = (size / 512) >> 8;
+		tf->nsect = size / 512;
+		tf->command = ATA_CMD_DSM;
+	}
+
 	tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 |
 		     ATA_TFLAG_WRITE;
 

include/linux/libata.h

@@ -1606,6 +1606,13 @@ static inline int ata_ncq_enabled(struct ata_device *dev)
 			      ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ;
 }
 
+static inline bool ata_fpdma_dsm_supported(struct ata_device *dev)
+{
+	return (dev->flags & ATA_DFLAG_NCQ_SEND_RECV) &&
+		(dev->ncq_send_recv_cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &
+		 ATA_LOG_NCQ_SEND_RECV_DSM_TRIM);
+}
+
 static inline void ata_qc_set_polling(struct ata_queued_cmd *qc)
 {
 	qc->tf.ctl |= ATA_NIEN;