sh: remove support for sh73180 and solution engine 73180

This patch removes old dead code:
- kill off sh73180 cpu support
- get rid of broken solution engine 73180 board support
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

arch/sh/Kconfig

@@ -274,14 +274,6 @@ config SH_7343_SOLUTION_ENGINE
 	  Select 7343 SolutionEngine if configuring for a Hitachi
 	  SH7343 (SH-Mobile 3AS) evaluation board.
 
-config SH_73180_SOLUTION_ENGINE
-	bool "SolutionEngine73180"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH73180
-	help
-	  Select 73180 SolutionEngine if configuring for a Hitachi
-	  SH73180(SH-Mobile 3) evaluation board.
-
 config SH_7751_SYSTEMH
 	bool "SystemH7751R"
 	depends on CPU_SUBTYPE_SH7751R
@@ -445,7 +437,7 @@ config SH_TIMER_IRQ
 
 config SH_PCLK_FREQ
 	int "Peripheral clock frequency (in Hz)"
-	default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343
+	default "27000000" if CPU_SUBTYPE_SH7343
 	default "31250000" if CPU_SUBTYPE_SH7619
 	default "32000000" if CPU_SUBTYPE_SH7722
 	default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \

arch/sh/Makefile

@@ -93,7 +93,6 @@ machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= se/7751
 machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= se/7780
 machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE)	+= se/7300
 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= se/7343
-machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE)	+= se/73180
 machdir-$(CONFIG_SH_HP6XX)			+= hp6xx
 machdir-$(CONFIG_SH_DREAMCAST)			+= dreamcast
 machdir-$(CONFIG_SH_MPC1211)			+= mpc1211

arch/sh/boards/se/73180/Makefile

-#
-# Makefile for the 73180 SolutionEngine specific parts of the kernel
-#
-
-obj-y	 := setup.o io.o irq.o

arch/sh/boards/se/73180/io.c

-/*
- * arch/sh/boards/se/73180/io.c
- *
- * Copyright (C) 2003 YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp>
- * Based on arch/sh/boards/se/7300/io.c
- *
- * I/O routine for SH-Mobile3 73180 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <asm/mach/se73180.h>
-#include <asm/io.h>
-
-#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
-
-struct iop {
-	unsigned long start, end;
-	unsigned long base;
-	struct iop *(*check) (struct iop * p, unsigned long port);
-	unsigned char (*inb) (struct iop * p, unsigned long port);
-	unsigned short (*inw) (struct iop * p, unsigned long port);
-	void (*outb) (struct iop * p, unsigned char value, unsigned long port);
-	void (*outw) (struct iop * p, unsigned short value, unsigned long port);
-};
-
-struct iop *
-simple_check(struct iop *p, unsigned long port)
-{
-	if ((p->start <= port) && (port <= p->end))
-		return p;
-	else
-		badio(check, port);
-}
-
-struct iop *
-ide_check(struct iop *p, unsigned long port)
-{
-	if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
-		return p;
-	return NULL;
-}
-
-unsigned char
-simple_inb(struct iop *p, unsigned long port)
-{
-	return *(unsigned char *) (p->base + port);
-}
-
-unsigned short
-simple_inw(struct iop *p, unsigned long port)
-{
-	return *(unsigned short *) (p->base + port);
-}
-
-void
-simple_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	*(unsigned char *) (p->base + port) = value;
-}
-
-void
-simple_outw(struct iop *p, unsigned short value, unsigned long port)
-{
-	*(unsigned short *) (p->base + port) = value;
-}
-
-unsigned char
-pcc_inb(struct iop *p, unsigned long port)
-{
-	unsigned long addr = p->base + port + 0x40000;
-	unsigned long v;
-
-	if (port & 1)
-		addr += 0x00400000;
-	v = *(volatile unsigned char *) addr;
-	return v;
-}
-
-void
-pcc_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	unsigned long addr = p->base + port + 0x40000;
-
-	if (port & 1)
-		addr += 0x00400000;
-	*(volatile unsigned char *) addr = value;
-}
-
-unsigned char
-bad_inb(struct iop *p, unsigned long port)
-{
-	badio(inb, port);
-}
-
-void
-bad_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	badio(inw, port);
-}
-
-#ifdef CONFIG_SMC91X
-/* MSTLANEX01 LAN at 0xb400:0000 */
-static struct iop laniop = {
-	.start = 0x300,
-	.end = 0x30f,
-	.base = 0xb4000000,
-	.check = simple_check,
-	.inb = simple_inb,
-	.inw = simple_inw,
-	.outb = simple_outb,
-	.outw = simple_outw,
-};
-#endif
-
-/* NE2000 pc card NIC */
-static struct iop neiop = {
-	.start = 0x280,
-	.end = 0x29f,
-	.base = 0xb0600000 + 0x80,	/* soft 0x280 -> hard 0x300 */
-	.check = simple_check,
-	.inb = pcc_inb,
-	.inw = simple_inw,
-	.outb = pcc_outb,
-	.outw = simple_outw,
-};
-
-#ifdef CONFIG_IDE
-/* CF in CF slot */
-static struct iop cfiop = {
-	.base = 0xb0600000,
-	.check = ide_check,
-	.inb = pcc_inb,
-	.inw = simple_inw,
-	.outb = pcc_outb,
-	.outw = simple_outw,
-};
-#endif
-
-static __inline__ struct iop *
-port2iop(unsigned long port)
-{
-	if (0) ;
-#if defined(CONFIG_SMC91X)
-	else if (laniop.check(&laniop, port))
-		return &laniop;
-#endif
-#if defined(CONFIG_NE2000)
-	else if (neiop.check(&neiop, port))
-		return &neiop;
-#endif
-#if defined(CONFIG_IDE)
-	else if (cfiop.check(&cfiop, port))
-		return &cfiop;
-#endif
-	else
-		return &neiop;	/* fallback */
-}
-
-static inline void
-delay(void)
-{
-	ctrl_inw(0xac000000);
-	ctrl_inw(0xac000000);
-}
-
-unsigned char
-sh73180se_inb(unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	return (p->inb) (p, port);
-}
-
-unsigned char
-sh73180se_inb_p(unsigned long port)
-{
-	unsigned char v = sh73180se_inb(port);
-	delay();
-	return v;
-}
-
-unsigned short
-sh73180se_inw(unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	return (p->inw) (p, port);
-}
-
-unsigned int
-sh73180se_inl(unsigned long port)
-{
-	badio(inl, port);
-}
-
-void
-sh73180se_outb(unsigned char value, unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	(p->outb) (p, value, port);
-}
-
-void
-sh73180se_outb_p(unsigned char value, unsigned long port)
-{
-	sh73180se_outb(value, port);
-	delay();
-}
-
-void
-sh73180se_outw(unsigned short value, unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	(p->outw) (p, value, port);
-}
-
-void
-sh73180se_outl(unsigned int value, unsigned long port)
-{
-	badio(outl, port);
-}
-
-void
-sh73180se_insb(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned char *a = addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		*a++ = (p->inb) (p, port);
-}
-
-void
-sh73180se_insw(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned short *a = addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		*a++ = (p->inw) (p, port);
-}
-
-void
-sh73180se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	badio(insl, port);
-}
-
-void
-sh73180se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned char *a = (unsigned char *) addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		(p->outb) (p, *a++, port);
-}
-
-void
-sh73180se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned short *a = (unsigned short *) addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		(p->outw) (p, *a++, port);
-}
-
-void
-sh73180se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	badio(outsw, port);
-}

arch/sh/boards/se/73180/irq.c

-/*
- * arch/sh/boards/se/73180/irq.c
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- * Based on arch/sh/boards/se/7300/irq.c
- *
- * Modified for SH-Mobile SolutionEngine 73180 Support
- *              by YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp>
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/mach/se73180.h>
-
-static int
-irq2intreq(int irq)
-{
-	if (irq == 10)
-		return 5;
-	return 7 - (irq - 32);
-}
-
-static void
-disable_intreq_irq(unsigned int irq)
-{
-	ctrl_outb(1 << (7 - irq2intreq(irq)), INTMSK0);
-}
-
-static void
-enable_intreq_irq(unsigned int irq)
-{
-	ctrl_outb(1 << (7 - irq2intreq(irq)), INTMSKCLR0);
-}
-
-static void
-mask_and_ack_intreq_irq(unsigned int irq)
-{
-	disable_intreq_irq(irq);
-}
-
-static unsigned int
-startup_intreq_irq(unsigned int irq)
-{
-	enable_intreq_irq(irq);
-	return 0;
-}
-
-static void
-shutdown_intreq_irq(unsigned int irq)
-{
-	disable_intreq_irq(irq);
-}
-
-static void
-end_intreq_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		enable_intreq_irq(irq);
-}
-
-static struct hw_interrupt_type intreq_irq_type = {
-	.typename = "intreq",
-	.startup = startup_intreq_irq,
-	.shutdown = shutdown_intreq_irq,
-	.enable = enable_intreq_irq,
-	.disable = disable_intreq_irq,
-	.ack = mask_and_ack_intreq_irq,
-	.end = end_intreq_irq
-};
-
-void
-make_intreq_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &intreq_irq_type;
-	disable_intreq_irq(irq);
-}
-
-int
-shmse_irq_demux(int irq)
-{
-	if (irq == IRQ5_IRQ)
-		return 10;
-	return irq;
-}
-
-static struct ipr_data se73180_siof0_ipr_map[] = {
-	{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-};
-static struct ipr_data se73180_vpu_ipr_map[] = {
-	{ VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 },
-};
-static struct ipr_data se73180_other_ipr_map[] = {
-	{ DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-	{ IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-	{ SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY },
-
-	/* VIO interrupt */
-	{ CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-	{ BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-	{ VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-
-	{ LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init
-init_73180se_IRQ(void)
-{
-	make_ipr_irq(se73180_siof0_ipr_map, ARRAY_SIZE(se73180_siof0_ipr_map));
-
-	ctrl_outw(0x2000, 0xb03fffec);	/* mrshpc irq enable */
-	ctrl_outw(0x2000, 0xb07fffec);	/* mrshpc irq enable */
-	ctrl_outl(3 << ((7 - 5) * 4), INTC_INTPRI0);	/* irq5 pri=3 */
-	ctrl_outw(2 << ((7 - 5) * 2), INTC_ICR1);	/* low-level irq */
-	make_intreq_irq(10);
-
-	make_ipr_irq(se73180_vpu_ipr_map, ARRAY_SIZE(se73180_vpu_ipr_map));
-
-	ctrl_outb(0x0f, INTC_IMCR5);	/* enable SCIF IRQ */
-
-	make_ipr_irq(se73180_other_ipr_map, ARRAY_SIZE(se73180_other_ipr_map));
-
-	ctrl_outw(0x2000, PA_MRSHPC + 0x0c);	/* mrshpc irq enable */
-}

arch/sh/boards/se/73180/setup.c

-/*
- * arch/sh/boards/se/73180/setup.c
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- * Based on arch/sh/setup_shmse.c
- *
- * Modified for 73180 SolutionEngine
- *           by YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp>
- *
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se73180.h>
-#include <asm/irq.h>
-
-void init_73180se_IRQ(void);
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED + 8 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *se73180_devices[] __initdata = {
-	&heartbeat_device,
-};
-
-static int __init se73180_devices_setup(void)
-{
-	return platform_add_devices(se73180_devices,
-				    ARRAY_SIZE(se73180_devices));
-}
-__initcall(se73180_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_73180se __initmv = {
-	.mv_name = "SolutionEngine 73180",
-	.mv_nr_irqs = 108,
-	.mv_inb = sh73180se_inb,
-	.mv_inw = sh73180se_inw,
-	.mv_inl = sh73180se_inl,
-	.mv_outb = sh73180se_outb,
-	.mv_outw = sh73180se_outw,
-	.mv_outl = sh73180se_outl,
-
-	.mv_inb_p = sh73180se_inb_p,
-	.mv_inw_p = sh73180se_inw,
-	.mv_inl_p = sh73180se_inl,
-	.mv_outb_p = sh73180se_outb_p,
-	.mv_outw_p = sh73180se_outw,
-	.mv_outl_p = sh73180se_outl,
-
-	.mv_insb = sh73180se_insb,
-	.mv_insw = sh73180se_insw,
-	.mv_insl = sh73180se_insl,
-	.mv_outsb = sh73180se_outsb,
-	.mv_outsw = sh73180se_outsw,
-	.mv_outsl = sh73180se_outsl,
-
-	.mv_init_irq = init_73180se_IRQ,
-	.mv_irq_demux = shmse_irq_demux,
-};

arch/sh/configs/se73180_defconfig

-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:44:45 2006
-#
-CONFIG_SUPERH=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System type
-#
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-CONFIG_SH_73180_SOLUTION_ENGINE=y
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
-CONFIG_CPU_SH4=y
-CONFIG_CPU_SH4A=y
-CONFIG_CPU_SH4AL_DSP=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-CONFIG_CPU_SUBTYPE_SH73180=y
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-
-#
-# Memory management options
-#
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x02000000
-CONFIG_32BIT=y
-CONFIG_VSYSCALL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-
-#
-# Cache configuration
-#
-# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_SH_FPU is not set
-# CONFIG_SH_FPU_EMU is not set
-CONFIG_SH_DSP=y
-# CONFIG_SH_STORE_QUEUES is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-
-#
-# Timer support
-#
-CONFIG_SH_TMU=y
-CONFIG_SH_PCLK_FREQ=27000000
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00010000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,38400 root=/dev/ram"
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SH_WDT is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-# CONFIG_SYSFS is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_SH_STANDARD_BIOS=y
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_KGDB is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set

arch/sh/kernel/cpu/sh4/probe.c

@@ -90,12 +90,6 @@ int __init detect_cpu_and_cache_system(void)
 		current_cpu_data.type = CPU_SH7751;
 		current_cpu_data.flags |= CPU_HAS_FPU;
 		break;
-	case 0x2000:
-		current_cpu_data.type = CPU_SH73180;
-		current_cpu_data.icache.ways = 4;
-		current_cpu_data.dcache.ways = 4;
-		current_cpu_data.flags |= CPU_HAS_LLSC;
-		break;
 	case 0x2001:
 	case 0x2004:
 		current_cpu_data.type = CPU_SH7770;

arch/sh/kernel/cpu/sh4a/Makefile

@@ -6,13 +6,11 @@
 obj-$(CONFIG_CPU_SUBTYPE_SH7770)	+= setup-sh7770.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= setup-sh7780.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= setup-sh7785.o
-obj-$(CONFIG_CPU_SUBTYPE_SH73180)	+= setup-sh73180.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7722)	+= setup-sh7722.o
 obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o
 
 # Primary on-chip clocks (common)
-clock-$(CONFIG_CPU_SUBTYPE_SH73180)	:= clock-sh73180.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7770)	:= clock-sh7770.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o

arch/sh/kernel/cpu/sh4a/clock-sh73180.c

-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh73180.c
- *
- * SH73180 support for the clock framework
- *
- *  Copyright (C) 2005  Paul Mundt
- *
- * FRQCR parsing hacked out of arch/sh/kernel/time.c
- *
- *  Copyright (C) 1999  Tetsuya Okada & Niibe Yutaka
- *  Copyright (C) 2000  Philipp Rumpf <prumpf@tux.org>
- *  Copyright (C) 2002, 2003, 2004  Paul Mundt
- *  Copyright (C) 2002  M. R. Brown  <mrbrown@linux-sh.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-/*
- * SH73180 uses a common set of divisors, so this is quite simple..
- */
-static int divisors[] = { 1, 2, 3, 4, 6, 8, 12, 16 };
-
-static void master_clk_init(struct clk *clk)
-{
-	clk->rate *= divisors[ctrl_inl(FRQCR) & 0x0007];
-}
-
-static struct clk_ops sh73180_master_clk_ops = {
-	.init		= master_clk_init,
-};
-
-static void module_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQCR) & 0x0007);
-	clk->rate = clk->parent->rate / divisors[idx];
-}
-
-static struct clk_ops sh73180_module_clk_ops = {
-	.recalc		= module_clk_recalc,
-};
-
-static void bus_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQCR) >> 12) & 0x0007;
-	clk->rate = clk->parent->rate / divisors[idx];
-}
-
-static struct clk_ops sh73180_bus_clk_ops = {
-	.recalc		= bus_clk_recalc,
-};
-
-static void cpu_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQCR) >> 20) & 0x0007;
-	clk->rate = clk->parent->rate / divisors[idx];
-}
-
-static struct clk_ops sh73180_cpu_clk_ops = {
-	.recalc		= cpu_clk_recalc,
-};
-
-static struct clk_ops *sh73180_clk_ops[] = {
-	&sh73180_master_clk_ops,
-	&sh73180_module_clk_ops,
-	&sh73180_bus_clk_ops,
-	&sh73180_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
-{
-	if (idx < ARRAY_SIZE(sh73180_clk_ops))
-		*ops = sh73180_clk_ops[idx];
-}
-

arch/sh/kernel/cpu/sh4a/setup-sh73180.c

-/*
- * SH73180 Setup
- *
- *  Copyright (C) 2006  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <asm/sci.h>
-
-static struct plat_sci_port sci_platform_data[] = {
-	{
-		.mapbase	= 0xffe80000,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.type		= PORT_SCIF,
-		.irqs		= { 80, 81, 83, 82 },
-	}, {
-		.flags = 0,
-	}
-};
-
-static struct platform_device sci_device = {
-	.name		= "sh-sci",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= sci_platform_data,
-	},
-};
-
-static struct platform_device *sh73180_devices[] __initdata = {
-	&sci_device,
-};
-
-static int __init sh73180_devices_setup(void)
-{
-	return platform_add_devices(sh73180_devices,
-				    ARRAY_SIZE(sh73180_devices));
-}
-__initcall(sh73180_devices_setup);

arch/sh/kernel/setup.c

@@ -284,7 +284,7 @@ static const char *cpu_name[] = {
 	[CPU_SH7729]	= "SH7729",	[CPU_SH7750]	= "SH7750",
 	[CPU_SH7750S]	= "SH7750S",	[CPU_SH7750R]	= "SH7750R",
 	[CPU_SH7751]	= "SH7751",	[CPU_SH7751R]	= "SH7751R",
-	[CPU_SH7760]	= "SH7760",	[CPU_SH73180]	= "SH73180",
+	[CPU_SH7760]	= "SH7760",
 	[CPU_ST40RA]	= "ST40RA",	[CPU_ST40GX1]	= "ST40GX1",
 	[CPU_SH4_202]	= "SH4-202",	[CPU_SH4_501]	= "SH4-501",
 	[CPU_SH7770]	= "SH7770",	[CPU_SH7780]	= "SH7780",

arch/sh/mm/Kconfig

@@ -202,10 +202,6 @@ config CPU_SUBTYPE_SHX3
 
 # SH4AL-DSP Processor Support
 
-config CPU_SUBTYPE_SH73180
-	bool "Support SH73180 processor"
-	select CPU_SH4AL_DSP
-
 config CPU_SUBTYPE_SH7343
 	bool "Support SH7343 processor"
 	select CPU_SH4AL_DSP

drivers/serial/sh-sci.h

@@ -86,12 +86,6 @@
 # define PBCR 0xa4050102
 # define SCSCR_INIT(port)          0x3B
 # define SCIF_ONLY
-#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
-# define SCPDR  0xA4050138        /* 16 bit SCIF */
-# define SCSPTR2 SCPDR
-# define SCIF_ORER 0x0001   /* overrun error bit */
-# define SCSCR_INIT(port)  0x0038 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7343)
 # define SCSPTR0 0xffe00010	/* 16 bit SCIF */
 # define SCSPTR1 0xffe10010	/* 16 bit SCIF */
@@ -569,11 +563,6 @@ static inline int sci_rxd_in(struct uart_port *port)
                 return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */
         return 1;
 }
-#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
-static inline int sci_rxd_in(struct uart_port *port)
-{
-	return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */
-}
 #elif defined(CONFIG_CPU_SUBTYPE_SH7343)
 static inline int sci_rxd_in(struct uart_port *port)
 {

include/asm-sh/bugs.h

@@ -39,7 +39,7 @@ static void __init check_bugs(void)
 		*p++ = '4';
 		*p++ = 'a';
 		break;
-	case CPU_SH73180 ... CPU_SH7722:
+	case CPU_SH7343 ... CPU_SH7722:
 		*p++ = '4';
 		*p++ = 'a';
 		*p++ = 'l';

include/asm-sh/cpu-sh4/freq.h

@@ -10,7 +10,7 @@
 #ifndef __ASM_CPU_SH4_FREQ_H
 #define __ASM_CPU_SH4_FREQ_H
 
-#if defined(CONFIG_CPU_SUBTYPE_SH73180) || defined(CONFIG_CPU_SUBTYPE_SH7722)
+#if defined(CONFIG_CPU_SUBTYPE_SH7722)
 #define FRQCR		        0xa4150000
 #define VCLKCR			0xa4150004
 #define SCLKACR			0xa4150008

include/asm-sh/processor.h

@@ -55,7 +55,7 @@ enum cpu_type {
 	CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3,
 
 	/* SH4AL-DSP types */
-	CPU_SH73180, CPU_SH7343, CPU_SH7722,
+	CPU_SH7343, CPU_SH7722,
 
 	/* Unknown subtype */
 	CPU_SH_NONE