Merge branch 'fixes-non-critical' of git://github.com/hzhuang1/linux into next/maintainers

* 'fixes-non-critical' of git://github.com/hzhuang1/linux:
  MAINTAINERS: update MAINTAINERS email entry
  MAINTAINERS: update maintainer entry for pxa/hx4700

(update to v3.3-rc7)
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/gpio/led.txt

@@ -7,9 +7,9 @@ Each LED is represented as a sub-node of the gpio-leds device.  Each
 node's name represents the name of the corresponding LED.
 
 LED sub-node properties:
-- gpios :  Should specify the LED's GPIO, see "Specifying GPIO information
-  for devices" in Documentation/devicetree/booting-without-of.txt.  Active
-  low LEDs should be indicated using flags in the GPIO specifier.
+- gpios :  Should specify the LED's GPIO, see "gpios property" in
+  Documentation/devicetree/gpio.txt.  Active low LEDs should be
+  indicated using flags in the GPIO specifier.
 - label :  (optional) The label for this LED.  If omitted, the label is
   taken from the node name (excluding the unit address).
 - linux,default-trigger :  (optional) This parameter, if present, is a

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -30,6 +30,7 @@ national	National Semiconductor
 nintendo	Nintendo
 nvidia	NVIDIA
 nxp	NXP Semiconductors
+picochip	Picochip Ltd
 powervr	Imagination Technologies
 qcom	Qualcomm, Inc.
 ramtron	Ramtron International

Documentation/hwmon/jc42

@@ -7,21 +7,29 @@ Supported chips:
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
-  * IDT TSE2002B3, TS3000B3
-    Prefix: 'tse2002b3', 'ts3000b3'
+  * Atmel AT30TS00
+    Prefix: 'at30ts00'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
-	http://www.idt.com/products/getdoc.cfm?docid=18715691
-	http://www.idt.com/products/getdoc.cfm?docid=18715692
+	http://www.atmel.com/Images/doc8585.pdf
+  * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2
+    Prefix: 'tse2002', 'ts3000'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf
   * Maxim MAX6604
     Prefix: 'max6604'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
-  * Microchip MCP9805, MCP98242, MCP98243, MCP9843
-    Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
+  * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
+    Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
+	http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
@@ -48,6 +56,12 @@ Supported chips:
     Datasheets:
 	http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
 	http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
+  * ST Microelectronics STTS2002, STTS3000
+    Prefix: 'stts2002', 'stts3000'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f

Documentation/input/alps.txt

@@ -13,7 +13,8 @@ Detection
 
 All ALPS touchpads should respond to the "E6 report" command sequence:
 E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
-00-00-64.
+00-00-64 if no buttons are pressed. The bits 0-2 of the first byte will be 1s
+if some buttons are pressed.
 
 If the E6 report is successful, the touchpad model is identified using the "E7
 report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is

Documentation/kernel-parameters.txt

@@ -2211,6 +2211,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 			default: off.
 
+	printk.always_kmsg_dump=
+			Trigger kmsg_dump for cases other than kernel oops or
+			panics
+			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
+			default: disabled
+
 	printk.time=	Show timing data prefixed to each printk message line
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 

MAINTAINERS

@@ -813,9 +813,12 @@ S:	Maintained
 
 ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT
 M:	Philipp Zabel <philipp.zabel@gmail.com>
+M:	Paul Parsons <lost.distance@yahoo.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-pxa/hx4700.c
 F:	arch/arm/mach-pxa/include/mach/hx4700.h
+F:	sound/soc/pxa/hx4700.c
 
 ARM/HP JORNADA 7XX MACHINE SUPPORT
 M:	Kristoffer Ericson <kristoffer.ericson@gmail.com>
@@ -961,7 +964,7 @@ F:	drivers/tty/serial/msm_serial.c
 F:	drivers/platform/msm/
 F:	drivers/*/pm8???-*
 F:	include/linux/mfd/pm8xxx/
-T:	git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
 S:	Maintained
 
 ARM/TOSA MACHINE SUPPORT
@@ -1309,7 +1312,7 @@ F:	drivers/atm/
 F:	include/linux/atm*
 
 ATMEL AT91 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.atmel.com/products/AT91/
 W:	http://www.at91.com/
@@ -1317,7 +1320,7 @@ S:	Maintained
 F:	drivers/mmc/host/at91_mci.c
 
 ATMEL AT91 / AT32 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 S:	Maintained
 F:	drivers/mmc/host/atmel-mci.c
 F:	drivers/mmc/host/atmel-mci-regs.h
@@ -5340,7 +5343,7 @@ F:	drivers/media/video/pvrusb2/
 PXA2xx/PXA3xx SUPPORT
 M:	Eric Miao <eric.y.miao@gmail.com>
 M:	Russell King <linux@arm.linux.org.uk>
-M:	Haojian Zhuang <haojian.zhuang@marvell.com>
+M:	Haojian Zhuang <haojian.zhuang@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/hzhuang1/linux.git
 T:	git git://git.linaro.org/people/ycmiao/pxa-linux.git
@@ -5355,7 +5358,7 @@ F:	sound/soc/pxa
 
 MMP SUPPORT
 M:	Eric Miao <eric.y.miao@gmail.com>
-M:	Haojian Zhuang <haojian.zhuang@marvell.com>
+M:	Haojian Zhuang <haojian.zhuang@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/hzhuang1/linux.git
 T:	git git://git.linaro.org/people/ycmiao/pxa-linux.git

Makefile

 VERSION = 3
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/alpha/include/asm/futex.h

@@ -108,7 +108,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	"	lda	$31,3b-2b(%0)\n"
 	"	.previous\n"
 	:	"+r"(ret), "=&r"(prev), "=&r"(cmp)
-	:	"r"(uaddr), "r"((long)oldval), "r"(newval)
+	:	"r"(uaddr), "r"((long)(int)oldval), "r"(newval)
 	:	"memory");
 
 	*uval = prev;

arch/arm/Kconfig

@@ -1280,7 +1280,7 @@ config ARM_ERRATA_743622
 	depends on CPU_V7
 	help
 	  This option enables the workaround for the 743622 Cortex-A9
-	  (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+	  (r2p*) erratum. Under very rare conditions, a faulty
 	  optimisation in the Cortex-A9 Store Buffer may lead to data
 	  corruption. This workaround sets a specific bit in the diagnostic
 	  register of the Cortex-A9 which disables the Store Buffer

arch/arm/boot/.gitignore

@@ -3,3 +3,4 @@ zImage
 xipImage
 bootpImage
 uImage
+*.dtb

arch/arm/include/asm/pmu.h

@@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
 
 u64 armpmu_event_update(struct perf_event *event,
 			struct hw_perf_event *hwc,
-			int idx, int overflow);
+			int idx);
 
 int armpmu_event_set_period(struct perf_event *event,
 			    struct hw_perf_event *hwc,

arch/arm/kernel/ecard.c

@@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm)
 
 	memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
 
+	vma.vm_flags = VM_EXEC;
 	vma.vm_mm = mm;
 
 	flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);

arch/arm/kernel/perf_event.c

@@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event,
 u64
 armpmu_event_update(struct perf_event *event,
 		    struct hw_perf_event *hwc,
-		    int idx, int overflow)
+		    int idx)
 {
 	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
 	u64 delta, prev_raw_count, new_raw_count;
@@ -193,13 +193,7 @@ armpmu_event_update(struct perf_event *event,
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
-	new_raw_count &= armpmu->max_period;
-	prev_raw_count &= armpmu->max_period;
-
-	if (overflow)
-		delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
-	else
-		delta = new_raw_count - prev_raw_count;
+	delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
 
 	local64_add(delta, &event->count);
 	local64_sub(delta, &hwc->period_left);
@@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event)
 	if (hwc->idx < 0)
 		return;
 
-	armpmu_event_update(event, hwc, hwc->idx, 0);
+	armpmu_event_update(event, hwc, hwc->idx);
 }
 
 static void
@@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags)
 	if (!(hwc->state & PERF_HES_STOPPED)) {
 		armpmu->disable(hwc, hwc->idx);
 		barrier(); /* why? */
-		armpmu_event_update(event, hwc, hwc->idx, 0);
+		armpmu_event_update(event, hwc, hwc->idx);
 		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 	}
 }
@@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event)
 	hwc->config_base	    |= (unsigned long)mapping;
 
 	if (!hwc->sample_period) {
-		hwc->sample_period  = armpmu->max_period;
+		/*
+		 * For non-sampling runs, limit the sample_period to half
+		 * of the counter width. That way, the new counter value
+		 * is far less likely to overtake the previous one unless
+		 * you have some serious IRQ latency issues.
+		 */
+		hwc->sample_period  = armpmu->max_period >> 1;
 		hwc->last_period    = hwc->sample_period;
 		local64_set(&hwc->period_left, hwc->sample_period);
 	}
@@ -679,6 +679,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu)
 	armpmu->type = ARM_PMU_DEVICE_CPU;
 }
 
+/*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
+					unsigned long action, void *hcpu)
+{
+	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+		return NOTIFY_DONE;
+
+	if (cpu_pmu && cpu_pmu->reset)
+		cpu_pmu->reset(NULL);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
+	.notifier_call = pmu_cpu_notify,
+};
+
 /*
  * CPU PMU identification and registration.
  */
@@ -730,6 +752,7 @@ init_hw_perf_events(void)
 		pr_info("enabled with %s PMU driver, %d counters available\n",
 			cpu_pmu->name, cpu_pmu->num_events);
 		cpu_pmu_init(cpu_pmu);
+		register_cpu_notifier(&pmu_cpu_notifier);
 		armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
 	} else {
 		pr_info("no hardware support available\n");

arch/arm/kernel/perf_event_v6.c

@@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc,
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
-static int counter_is_active(unsigned long pmcr, int idx)
-{
-	unsigned long mask = 0;
-	if (idx == ARMV6_CYCLE_COUNTER)
-		mask = ARMV6_PMCR_CCOUNT_IEN;
-	else if (idx == ARMV6_COUNTER0)
-		mask = ARMV6_PMCR_COUNT0_IEN;
-	else if (idx == ARMV6_COUNTER1)
-		mask = ARMV6_PMCR_COUNT1_IEN;
-
-	if (mask)
-		return pmcr & mask;
-
-	WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-	return 0;
-}
-
 static irqreturn_t
 armv6pmu_handle_irq(int irq_num,
 		    void *dev)
@@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num,
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!counter_is_active(pmcr, idx))
+		/* Ignore if we don't have an event. */
+		if (!event)
 			continue;
 
 		/*
@@ -524,7 +508,7 @@ armv6pmu_handle_irq(int irq_num,
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;

arch/arm/kernel/perf_event_v7.c

@@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx)
 
 	counter = ARMV7_IDX_TO_COUNTER(idx);
 	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
+	isb();
+	/* Clear the overflow flag in case an interrupt is pending. */
+	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
+	isb();
+
 	return idx;
 }
 
@@ -955,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		/* Ignore if we don't have an event. */
+		if (!event)
+			continue;
+
 		/*
 		 * We have a single interrupt for all counters. Check that
 		 * each counter has overflowed before we process it.
@@ -963,7 +972,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;

arch/arm/kernel/perf_event_xscale.c

@@ -255,11 +255,14 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		if (!event)
+			continue;
+
 		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -592,11 +595,14 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+		if (!event)
+			continue;
+
+		if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -663,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
 static void
 xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 {
-	unsigned long flags, ien, evtsel;
+	unsigned long flags, ien, evtsel, of_flags;
 	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
 	ien = xscale2pmu_read_int_enable();
@@ -672,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	switch (idx) {
 	case XSCALE_CYCLE_COUNTER:
 		ien &= ~XSCALE2_CCOUNT_INT_EN;
+		of_flags = XSCALE2_CCOUNT_OVERFLOW;
 		break;
 	case XSCALE_COUNTER0:
 		ien &= ~XSCALE2_COUNT0_INT_EN;
 		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+		of_flags = XSCALE2_COUNT0_OVERFLOW;
 		break;
 	case XSCALE_COUNTER1:
 		ien &= ~XSCALE2_COUNT1_INT_EN;
 		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+		of_flags = XSCALE2_COUNT1_OVERFLOW;
 		break;
 	case XSCALE_COUNTER2:
 		ien &= ~XSCALE2_COUNT2_INT_EN;
 		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+		of_flags = XSCALE2_COUNT2_OVERFLOW;
 		break;
 	case XSCALE_COUNTER3:
 		ien &= ~XSCALE2_COUNT3_INT_EN;
 		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+		of_flags = XSCALE2_COUNT3_OVERFLOW;
 		break;
 	default:
 		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
@@ -701,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	xscale2pmu_write_event_select(evtsel);
 	xscale2pmu_write_int_enable(ien);
+	xscale2pmu_write_overflow_flags(of_flags);
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -38,10 +38,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 8,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_BASE_DMA,
@@ -56,12 +52,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9g45_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -69,9 +64,15 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
-	dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
-	platform_device_register(&at_hdmac_device);
+#if defined(CONFIG_OF)
+	struct device_node *of_node =
+		of_find_node_by_name(NULL, "dma-controller");
+
+	if (of_node)
+		of_node_put(of_node);
+	else
+#endif
+		platform_device_register(&at_hdmac_device);
 }
 #else
 void __init at91_add_device_hdmac(void) {}

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -33,10 +33,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 2,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9RL_BASE_DMA,
@@ -51,12 +47,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9rl_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -64,7 +59,6 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
 	platform_device_register(&at_hdmac_device);
 }
 #else

arch/arm/mach-ep93xx/vision_ep9307.c

@@ -34,6 +34,7 @@
 #include <mach/ep93xx_spi.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -361,6 +362,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	.atag_offset	= 0x100,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= vision_init_machine,
 	.restart	= ep93xx_restart,

arch/arm/mach-exynos/mach-universal_c210.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/machine.h>
@@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = {
 	.threshold	= 0x28,
 	.voltage	= 2800000,		/* 2.8V */
 	.orient		= MXT_DIAGONAL,
+	.irqflags	= IRQF_TRIGGER_FALLING,
 };
 
 static struct i2c_board_info i2c3_devs[] __initdata = {

arch/arm/mach-omap2/id.c

@@ -343,6 +343,7 @@ static void __init omap3_check_revision(const char **cpu_rev)
 	case 0xb944:
 		omap_revision = AM335X_REV_ES1_0;
 		*cpu_rev = "1.0";
+		break;
 	case 0xb8f2:
 		switch (rev) {
 		case 0:

arch/arm/mach-omap2/mailbox.c

@@ -420,8 +420,7 @@ static void __exit omap2_mbox_exit(void)
 	platform_driver_unregister(&omap2_mbox_driver);
 }
 
-/* must be ready before omap3isp is probed */
-subsys_initcall(omap2_mbox_init);
+module_init(omap2_mbox_init);
 module_exit(omap2_mbox_exit);
 
 MODULE_LICENSE("GPL v2");

arch/arm/mach-omap2/omap-iommu.c

@@ -150,7 +150,8 @@ static int __init omap_iommu_init(void)
 		platform_device_put(omap_iommu_pdev[i]);
 	return err;
 }
-module_init(omap_iommu_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap_iommu_init);
 
 static void __exit omap_iommu_exit(void)
 {

arch/arm/mach-omap2/omap4-common.c

@@ -31,6 +31,7 @@
 
 #include "common.h"
 #include "omap4-sar-layout.h"
+#include <linux/export.h>
 
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;
@@ -55,6 +56,7 @@ void omap_bus_sync(void)
 		isb();
 	}
 }
+EXPORT_SYMBOL(omap_bus_sync);
 
 /* Steal one page physical memory for barrier implementation */
 int __init omap_barrier_reserve_memblock(void)

arch/arm/mach-omap2/twl-common.c

@@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = {
 	.constraints = {
 		.min_uV			= 3300000,
 		.max_uV			= 3300000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE

arch/arm/mach-pxa/generic.h

@@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int);
 #endif
 
 extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa_gpio_syscore_ops;
 extern struct syscore_ops pxa2xx_mfp_syscore_ops;
 extern struct syscore_ops pxa3xx_mfp_syscore_ops;
 

arch/arm/mach-pxa/mfp-pxa2xx.c

@@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void)
 {
 	int i;
 
+	/* running before pxa_gpio_probe() */
+#ifdef CONFIG_CPU_PXA26x
+	pxa_last_gpio = 89;
+#else
+	pxa_last_gpio = 84;
+#endif
 	for (i = 0; i <= pxa_last_gpio; i++)
 		gpio_desc[i].valid = 1;
 
@@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void)
 {
 	int i, gpio;
 
+	pxa_last_gpio = 120;	/* running before pxa_gpio_probe() */
 	for (i = 0; i <= pxa_last_gpio; i++) {
 		/* skip GPIO2, 5, 6, 7, 8, they are not
 		 * valid pins allow configuration

arch/arm/mach-pxa/pxa25x.c

@@ -208,6 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 static struct clk_lookup pxa25x_hwuart_clkreg =
@@ -367,7 +368,6 @@ static int __init pxa25x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(pxa25x_devices,

arch/arm/mach-pxa/pxa27x.c

@@ -229,6 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -455,7 +456,6 @@ static int __init pxa27x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/pxa3xx.c

@@ -462,7 +462,6 @@ static int __init pxa3xx_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/pxa95x.c

@@ -283,7 +283,6 @@ static int __init pxa95x_init(void)
 			return ret;
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-s3c2440/common.h

@@ -12,6 +12,6 @@
 #ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
 #define __ARCH_ARM_MACH_S3C2440_COMMON_H
 
-void s3c2440_restart(char mode, const char *cmd);
+void s3c244x_restart(char mode, const char *cmd);
 
 #endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */

arch/arm/mach-s3c2440/mach-anubis.c

@@ -487,5 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-at2440evb.c

@@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-gta02.c

@@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= gta02_machine_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-mini2440.c

@@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440")
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-nexcoder.c

@@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-osiris.c

@@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-rx1950.c

@@ -822,5 +822,5 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
 	.timer = &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-rx3715.c

@@ -213,5 +213,5 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.init_irq	= rx3715_init_irq,
 	.init_machine	= rx3715_init_machine,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-smdk2440.c

@@ -183,5 +183,5 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/s3c2440.c

@@ -35,7 +35,6 @@
 #include <plat/cpu.h>
 #include <plat/s3c244x.h>
 #include <plat/pm.h>
-#include <plat/watchdog-reset.h>
 
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
@@ -74,15 +73,3 @@ void __init s3c2440_map_io(void)
 	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
 	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
 }
-
-void s3c2440_restart(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		soft_restart(0);
-	}
-
-	arch_wdt_reset();
-
-	/* we'll take a jump through zero as a poor second */
-	soft_restart(0);
-}

arch/arm/mach-s3c2440/s3c244x.c

@@ -46,6 +46,7 @@
 #include <plat/pm.h>
 #include <plat/pll.h>
 #include <plat/nand-core.h>
+#include <plat/watchdog-reset.h>
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
@@ -196,3 +197,14 @@ struct syscore_ops s3c244x_pm_syscore_ops = {
 	.suspend	= s3c244x_suspend,
 	.resume		= s3c244x_resume,
 };
+
+void s3c244x_restart(char mode, const char *cmd)
+{
+	if (mode == 's')
+		soft_restart(0);
+
+	arch_wdt_reset();
+
+	/* we'll take a jump through zero as a poor second */
+	soft_restart(0);
+}

arch/arm/mach-ux500/Kconfig

@@ -5,7 +5,7 @@ config UX500_SOC_COMMON
 	default y
 	select ARM_GIC
 	select HAS_MTU
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369
 

arch/arm/mach-vexpress/Kconfig

@@ -7,7 +7,7 @@ config ARCH_VEXPRESS_CA9X4
 	select ARM_GIC
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_751472
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 

arch/arm/mm/proc-v7.S

@@ -230,9 +230,7 @@ __v7_setup:
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
 #endif
 #ifdef CONFIG_ARM_ERRATA_743622
-	teq	r6, #0x20			@ present in r2p0
-	teqne	r6, #0x21			@ present in r2p1
-	teqne	r6, #0x22			@ present in r2p2
+	teq	r5, #0x00200000			@ only present in r2p*
 	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
 	orreq	r10, r10, #1 << 6		@ set bit #6
 	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register

arch/arm/plat-omap/include/plat/irqs.h

@@ -428,8 +428,16 @@
 #define OMAP_GPMC_NR_IRQS	8
 #define OMAP_GPMC_IRQ_END	(OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
 
+/* PRCM IRQ handler */
+#ifdef CONFIG_ARCH_OMAP2PLUS
+#define OMAP_PRCM_IRQ_BASE	(OMAP_GPMC_IRQ_END)
+#define OMAP_PRCM_NR_IRQS	64
+#define OMAP_PRCM_IRQ_END	(OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS)
+#else
+#define OMAP_PRCM_IRQ_END	OMAP_GPMC_IRQ_END
+#endif
 
-#define NR_IRQS			OMAP_GPMC_IRQ_END
+#define NR_IRQS			OMAP_PRCM_IRQ_END
 
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
 

arch/arm/plat-s3c24xx/dma.c

@@ -1249,7 +1249,7 @@ static void s3c2410_dma_resume(void)
 	struct s3c2410_dma_chan *cp = s3c2410_chans + dma_channels - 1;
 	int channel;
 
-	for (channel = dma_channels - 1; channel >= 0; cp++, channel--)
+	for (channel = dma_channels - 1; channel >= 0; cp--, channel--)
 		s3c2410_dma_resume_chan(cp);
 }
 

arch/arm/plat-samsung/devs.c

@@ -1409,7 +1409,7 @@ void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd)
 
 #ifdef CONFIG_S3C_DEV_USB_HSOTG
 static struct resource s3c_usb_hsotg_resources[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_16K),
+	[0] = DEFINE_RES_MEM(S3C_PA_USB_HSOTG, SZ_128K),
 	[1] = DEFINE_RES_IRQ(IRQ_OTG),
 };
 

arch/arm/plat-spear/time.c

@@ -145,11 +145,13 @@ static void clockevent_set_mode(enum clock_event_mode mode,
 static int clockevent_next_event(unsigned long cycles,
 				 struct clock_event_device *clk_event_dev)
 {
-	u16 val;
+	u16 val = readw(gpt_base + CR(CLKEVT));
+
+	if (val & CTRL_ENABLE)
+		writew(val & ~CTRL_ENABLE, gpt_base + CR(CLKEVT));
 
 	writew(cycles, gpt_base + LOAD(CLKEVT));
 
-	val = readw(gpt_base + CR(CLKEVT));
 	val |= CTRL_ENABLE | CTRL_INT_ENABLE;
 	writew(val, gpt_base + CR(CLKEVT));
 

arch/c6x/include/asm/processor.h

@@ -122,8 +122,8 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
 
 extern unsigned long get_wchan(struct task_struct *p);
 
-#define KSTK_EIP(tsk)	(task_pt_regs(task)->pc)
-#define	KSTK_ESP(tsk)	(task_pt_regs(task)->sp)
+#define KSTK_EIP(task)	(task_pt_regs(task)->pc)
+#define KSTK_ESP(task)	(task_pt_regs(task)->sp)
 
 #define cpu_relax()		do { } while (0)
 

arch/mips/alchemy/common/time.c

@@ -146,7 +146,7 @@ static int __init alchemy_time_init(unsigned int m2int)
 	cd->shift = 32;
 	cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
 	cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
-	cd->min_delta_ns = clockevent_delta2ns(8, cd);	/* ~0.25ms */
+	cd->min_delta_ns = clockevent_delta2ns(9, cd);	/* ~0.28ms */
 	clockevents_register_device(cd);
 	setup_irq(m2int, &au1x_rtcmatch2_irqaction);
 

arch/mips/ath79/dev-wmac.c

@@ -96,7 +96,7 @@ void __init ath79_register_wmac(u8 *cal_data)
 {
 	if (soc_is_ar913x())
 		ar913x_wmac_setup();
-	if (soc_is_ar933x())
+	else if (soc_is_ar933x())
 		ar933x_wmac_setup();
 	else
 		BUG();

arch/mips/configs/nlm_xlp_defconfig

@@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y
 # CONFIG_SECCOMP is not set
 CONFIG_USE_OF=y
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-gnu-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -22,7 +22,7 @@ CONFIG_AUDIT=y
 CONFIG_CGROUPS=y
 CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlp"
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
 CONFIG_INITRAMFS_COMPRESSION_LZMA=y

arch/mips/configs/nlm_xlr_defconfig

@@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_KEXEC=y
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-gnu-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -22,7 +22,7 @@ CONFIG_AUDIT=y
 CONFIG_NAMESPACES=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlr"
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
 CONFIG_INITRAMFS_COMPRESSION_GZIP=y

arch/mips/configs/powertv_defconfig

@@ -6,7 +6,7 @@ CONFIG_HZ_1000=y
 CONFIG_PREEMPT=y
 # CONFIG_SECCOMP is not set
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=16

arch/mips/include/asm/mach-au1x00/gpio-au1300.h

@@ -11,6 +11,9 @@
 #include <asm/io.h>
 #include <asm/mach-au1x00/au1000.h>
 
+struct gpio;
+struct gpio_chip;
+
 /* with the current GPIC design, up to 128 GPIOs are possible.
  * The only implementation so far is in the Au1300, which has 75 externally
  * available GPIOs.
@@ -203,7 +206,22 @@ static inline int gpio_request(unsigned int gpio, const char *label)
 	return 0;
 }
 
-static inline void gpio_free(unsigned int gpio)
+static inline int gpio_request_one(unsigned gpio,
+					unsigned long flags, const char *label)
+{
+	return 0;
+}
+
+static inline int gpio_request_array(struct gpio *array, size_t num)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+static inline void gpio_free_array(struct gpio *array, size_t num)
 {
 }
 

arch/mips/include/asm/page.h

@@ -39,9 +39,6 @@
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
 #else /* !CONFIG_HUGETLB_PAGE */
-# ifndef BUILD_BUG
-#  define BUILD_BUG() do { extern void __build_bug(void); __build_bug(); } while (0)
-# endif
 #define HPAGE_SHIFT	({BUILD_BUG(); 0; })
 #define HPAGE_SIZE	({BUILD_BUG(); 0; })
 #define HPAGE_MASK	({BUILD_BUG(); 0; })

arch/mips/kernel/smp-bmips.c

@@ -8,7 +8,6 @@
  * SMP support for BMIPS
  */
 
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/mm.h>

arch/mips/kernel/traps.c

@@ -1135,7 +1135,7 @@ asmlinkage void do_mt(struct pt_regs *regs)
 		printk(KERN_DEBUG "YIELD Scheduler Exception\n");
 		break;
 	case 5:
-		printk(KERN_DEBUG "Gating Storage Schedulier Exception\n");
+		printk(KERN_DEBUG "Gating Storage Scheduler Exception\n");
 		break;
 	default:
 		printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",

arch/mips/kernel/vmlinux.lds.S

@@ -69,7 +69,6 @@ SECTIONS
 	RODATA
 
 	/* writeable */
-	_sdata = .;				/* Start of data section */
 	.data : {	/* Data */
 		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
 

arch/mips/mm/fault.c

@@ -42,6 +42,8 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
 	const int field = sizeof(unsigned long) * 2;
 	siginfo_t info;
 	int fault;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+						 (write ? FAULT_FLAG_WRITE : 0);
 
 #if 0
 	printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(),
@@ -91,6 +93,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
 	if (in_atomic() || !mm)
 		goto bad_area_nosemaphore;
 
+retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
 	if (!vma)
@@ -144,7 +147,11 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
+	fault = handle_mm_fault(mm, vma, address, flags);
+
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return;
+
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
@@ -153,12 +160,27 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR) {
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
-		tsk->maj_flt++;
-	} else {
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
-		tsk->min_flt++;
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+		if (fault & VM_FAULT_MAJOR) {
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
+						  regs, address);
+			tsk->maj_flt++;
+		} else {
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
+						  regs, address);
+			tsk->min_flt++;
+		}
+		if (fault & VM_FAULT_RETRY) {
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+			/*
+			 * No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+
+			goto retry;
+		}
 	}
 
 	up_read(&mm->mmap_sem);

arch/mips/pci/pci.c

@@ -279,7 +279,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 {
 	/* Propagate hose info into the subordinate devices.  */
 
-	struct list_head *ln;
 	struct pci_dev *dev = bus->self;
 
 	if (pci_probe_only && dev &&
@@ -288,9 +287,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 		pcibios_fixup_device_resources(dev, bus);
 	}
 
-	for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
-		dev = pci_dev_b(ln);
-
+	list_for_each_entry(dev, &bus->devices, bus_list) {
 		if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
 			pcibios_fixup_device_resources(dev, bus);
 	}

arch/mips/pmc-sierra/yosemite/ht-irq.c

@@ -35,16 +35,6 @@
  */
 void __init titan_ht_pcibios_fixup_bus(struct pci_bus *bus)
 {
-	struct pci_bus *current_bus = bus;
-	struct pci_dev *devices;
-	struct list_head *devices_link;
-
-	list_for_each(devices_link, &(current_bus->devices)) {
-		devices = pci_dev_b(devices_link);
-		if (devices == NULL)
-			continue;
-	}
-
 	/*
 	 * PLX and SPKT related changes go here
 	 */

arch/mips/txx9/generic/7segled.c

@@ -102,7 +102,7 @@ static int __init tx_7segled_init_sysfs(void)
 			break;
 		}
 		dev->id = i;
-		dev->dev = &tx_7segled_subsys;
+		dev->bus = &tx_7segled_subsys;
 		error = device_register(dev);
 		if (!error) {
 			device_create_file(dev, &dev_attr_ascii);

arch/x86/ia32/ia32_aout.c

@@ -315,6 +315,13 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	current->mm->free_area_cache = TASK_UNMAPPED_BASE;
 	current->mm->cached_hole_size = 0;
 
+	retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
+	if (retval < 0) {
+		/* Someone check-me: is this error path enough? */
+		send_sig(SIGKILL, current, 0);
+		return retval;
+	}
+
 	install_exec_creds(bprm);
 	current->flags &= ~PF_FORKNOEXEC;
 
@@ -410,13 +417,6 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 
 	set_brk(current->mm->start_brk, current->mm->brk);
 
-	retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
-	if (retval < 0) {
-		/* Someone check-me: is this error path enough? */
-		send_sig(SIGKILL, current, 0);
-		return retval;
-	}
-
 	current->mm->start_stack =
 		(unsigned long)create_aout_tables((char __user *)bprm->p, bprm);
 	/* start thread */

arch/x86/lib/delay.c

@@ -48,9 +48,9 @@ static void delay_loop(unsigned long loops)
 }
 
 /* TSC based delay: */
-static void delay_tsc(unsigned long loops)
+static void delay_tsc(unsigned long __loops)
 {
-	unsigned long bclock, now;
+	u32 bclock, now, loops = __loops;
 	int cpu;
 
 	preempt_disable();

arch/x86/mm/hugetlbpage.c

@@ -333,13 +333,15 @@ static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file,
 		 * Lookup failure means no vma is above this address,
 		 * i.e. return with success:
 		 */
-		if (!(vma = find_vma_prev(mm, addr, &prev_vma)))
+		vma = find_vma(mm, addr);
+		if (!vma)
 			return addr;
 
 		/*
 		 * new region fits between prev_vma->vm_end and
 		 * vma->vm_start, use it:
 		 */
+		prev_vma = vma->vm_prev;
 		if (addr + len <= vma->vm_start &&
 		            (!prev_vma || (addr >= prev_vma->vm_end))) {
 			/* remember the address as a hint for next time */

arch/x86/pci/acpi.c

@@ -60,6 +60,16 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = {
 			DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
 		},
 	},
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */
+	{
+		.callback = set_use_crs,
+		.ident = "MSI MS-7253",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+			DMI_MATCH(DMI_BOARD_NAME, "MS-7253"),
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+		},
+	},
 
 	/* Now for the blacklist.. */
 
@@ -282,9 +292,6 @@ static void add_resources(struct pci_root_info *info)
 	int i;
 	struct resource *res, *root, *conflict;
 
-	if (!pci_use_crs)
-		return;
-
 	coalesce_windows(info, IORESOURCE_MEM);
 	coalesce_windows(info, IORESOURCE_IO);
 
@@ -336,8 +343,13 @@ get_current_resources(struct acpi_device *device, int busnum,
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
 				&info);
 
-	add_resources(&info);
-	return;
+	if (pci_use_crs) {
+		add_resources(&info);
+
+		return;
+	}
+
+	kfree(info.name);
 
 name_alloc_fail:
 	kfree(info.res);

drivers/block/floppy.c

@@ -3832,7 +3832,7 @@ static int __floppy_read_block_0(struct block_device *bdev)
 	bio.bi_size = size;
 	bio.bi_bdev = bdev;
 	bio.bi_sector = 0;
-	bio.bi_flags = BIO_QUIET;
+	bio.bi_flags = (1 << BIO_QUIET);
 	init_completion(&complete);
 	bio.bi_private = &complete;
 	bio.bi_end_io = floppy_rb0_complete;

drivers/gpu/drm/gma500/cdv_device.c

@@ -321,6 +321,8 @@ static int cdv_chip_setup(struct drm_device *dev)
 	cdv_get_core_freq(dev);
 	gma_intel_opregion_init(dev);
 	psb_intel_init_bios(dev);
+	REG_WRITE(PORT_HOTPLUG_EN, 0);
+	REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT));
 	return 0;
 }
 

drivers/gpu/drm/gma500/framebuffer.c

@@ -247,7 +247,6 @@ static struct fb_ops psbfb_roll_ops = {
 	.fb_imageblit = cfb_imageblit,
 	.fb_pan_display = psbfb_pan,
 	.fb_mmap = psbfb_mmap,
-	.fb_sync = psbfb_sync,
 	.fb_ioctl = psbfb_ioctl,
 };
 

drivers/gpu/drm/gma500/gtt.c

@@ -446,10 +446,9 @@ int psb_gtt_init(struct drm_device *dev, int resume)
 	pg->gtt_start = pci_resource_start(dev->pdev, PSB_GTT_RESOURCE);
 	gtt_pages = pci_resource_len(dev->pdev, PSB_GTT_RESOURCE)
 								>> PAGE_SHIFT;
-	/* Some CDV firmware doesn't report this currently. In which case the
-	   system has 64 gtt pages */
+	/* CDV doesn't report this. In which case the system has 64 gtt pages */
 	if (pg->gtt_start == 0 || gtt_pages == 0) {
-		dev_err(dev->dev, "GTT PCI BAR not initialized.\n");
+		dev_dbg(dev->dev, "GTT PCI BAR not initialized.\n");
 		gtt_pages = 64;
 		pg->gtt_start = dev_priv->pge_ctl;
 	}
@@ -461,10 +460,10 @@ int psb_gtt_init(struct drm_device *dev, int resume)
 
 	if (pg->gatt_pages == 0 || pg->gatt_start == 0) {
 		static struct resource fudge;	/* Preferably peppermint */
-		/* This can occur on CDV SDV systems. Fudge it in this case.
+		/* This can occur on CDV systems. Fudge it in this case.
 		   We really don't care what imaginary space is being allocated
 		   at this point */
-		dev_err(dev->dev, "GATT PCI BAR not initialized.\n");
+		dev_dbg(dev->dev, "GATT PCI BAR not initialized.\n");
 		pg->gatt_start = 0x40000000;
 		pg->gatt_pages = (128 * 1024 * 1024) >> PAGE_SHIFT;
 		/* This is a little confusing but in fact the GTT is providing

drivers/gpu/drm/radeon/r600.c

@@ -2362,6 +2362,9 @@ void r600_semaphore_ring_emit(struct radeon_device *rdev,
 	uint64_t addr = semaphore->gpu_addr;
 	unsigned sel = emit_wait ? PACKET3_SEM_SEL_WAIT : PACKET3_SEM_SEL_SIGNAL;
 
+	if (rdev->family < CHIP_CAYMAN)
+		sel |= PACKET3_SEM_WAIT_ON_SIGNAL;
+
 	radeon_ring_write(ring, PACKET3(PACKET3_MEM_SEMAPHORE, 1));
 	radeon_ring_write(ring, addr & 0xffffffff);
 	radeon_ring_write(ring, (upper_32_bits(addr) & 0xff) | sel);

drivers/gpu/drm/radeon/r600_blit_shaders.c

@@ -313,6 +313,10 @@ const u32 r6xx_default_state[] =
 	0x00000000, /* VGT_REUSE_OFF */
 	0x00000000, /* VGT_VTX_CNT_EN */
 
+	0xc0016900,
+	0x000000d4,
+	0x00000000, /* SX_MISC */
+
 	0xc0016900,
 	0x000002c8,
 	0x00000000, /* VGT_STRMOUT_BUFFER_EN */
@@ -625,6 +629,10 @@ const u32 r7xx_default_state[] =
 	0x00000000, /* VGT_REUSE_OFF */
 	0x00000000, /* VGT_VTX_CNT_EN */
 
+	0xc0016900,
+	0x000000d4,
+	0x00000000, /* SX_MISC */
+
 	0xc0016900,
 	0x000002c8,
 	0x00000000, /* VGT_STRMOUT_BUFFER_EN */

drivers/gpu/drm/radeon/r600d.h

@@ -831,6 +831,7 @@
 #define	PACKET3_STRMOUT_BUFFER_UPDATE			0x34
 #define	PACKET3_INDIRECT_BUFFER_MP			0x38
 #define	PACKET3_MEM_SEMAPHORE				0x39
+#              define PACKET3_SEM_WAIT_ON_SIGNAL    (0x1 << 12)
 #              define PACKET3_SEM_SEL_SIGNAL	    (0x6 << 29)
 #              define PACKET3_SEM_SEL_WAIT	    (0x7 << 29)
 #define	PACKET3_MPEG_INDEX				0x3A

drivers/gpu/drm/radeon/radeon_connectors.c

@@ -1057,7 +1057,7 @@ static int radeon_dvi_mode_valid(struct drm_connector *connector,
 		    (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_B))
 			return MODE_OK;
 		else if (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_A) {
-			if (ASIC_IS_DCE3(rdev)) {
+			if (0) {
 				/* HDMI 1.3+ supports max clock of 340 Mhz */
 				if (mode->clock > 340000)
 					return MODE_CLOCK_HIGH;

drivers/gpu/drm/radeon/radeon_display.c

@@ -1078,15 +1078,21 @@ static const struct drm_framebuffer_funcs radeon_fb_funcs = {
 	.create_handle = radeon_user_framebuffer_create_handle,
 };
 
-void
+int
 radeon_framebuffer_init(struct drm_device *dev,
 			struct radeon_framebuffer *rfb,
 			struct drm_mode_fb_cmd2 *mode_cmd,
 			struct drm_gem_object *obj)
 {
+	int ret;
 	rfb->obj = obj;
-	drm_framebuffer_init(dev, &rfb->base, &radeon_fb_funcs);
+	ret = drm_framebuffer_init(dev, &rfb->base, &radeon_fb_funcs);
+	if (ret) {
+		rfb->obj = NULL;
+		return ret;
+	}
 	drm_helper_mode_fill_fb_struct(&rfb->base, mode_cmd);
+	return 0;
 }
 
 static struct drm_framebuffer *
@@ -1096,6 +1102,7 @@ radeon_user_framebuffer_create(struct drm_device *dev,
 {
 	struct drm_gem_object *obj;
 	struct radeon_framebuffer *radeon_fb;
+	int ret;
 
 	obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handles[0]);
 	if (obj ==  NULL) {
@@ -1108,7 +1115,12 @@ radeon_user_framebuffer_create(struct drm_device *dev,
 	if (radeon_fb == NULL)
 		return ERR_PTR(-ENOMEM);
 
-	radeon_framebuffer_init(dev, radeon_fb, mode_cmd, obj);
+	ret = radeon_framebuffer_init(dev, radeon_fb, mode_cmd, obj);
+	if (ret) {
+		kfree(radeon_fb);
+		drm_gem_object_unreference_unlocked(obj);
+		return NULL;
+	}
 
 	return &radeon_fb->base;
 }

drivers/gpu/drm/radeon/radeon_encoders.c

@@ -307,8 +307,6 @@ void radeon_panel_mode_fixup(struct drm_encoder *encoder,
 bool radeon_dig_monitor_is_duallink(struct drm_encoder *encoder,
 				    u32 pixel_clock)
 {
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
 	struct drm_connector *connector;
 	struct radeon_connector *radeon_connector;
 	struct radeon_connector_atom_dig *dig_connector;
@@ -326,7 +324,7 @@ bool radeon_dig_monitor_is_duallink(struct drm_encoder *encoder,
 	case DRM_MODE_CONNECTOR_HDMIB:
 		if (radeon_connector->use_digital) {
 			/* HDMI 1.3 supports up to 340 Mhz over single link */
-			if (ASIC_IS_DCE3(rdev) && drm_detect_hdmi_monitor(radeon_connector->edid)) {
+			if (0 && drm_detect_hdmi_monitor(radeon_connector->edid)) {
 				if (pixel_clock > 340000)
 					return true;
 				else
@@ -348,7 +346,7 @@ bool radeon_dig_monitor_is_duallink(struct drm_encoder *encoder,
 			return false;
 		else {
 			/* HDMI 1.3 supports up to 340 Mhz over single link */
-			if (ASIC_IS_DCE3(rdev) && drm_detect_hdmi_monitor(radeon_connector->edid)) {
+			if (0 && drm_detect_hdmi_monitor(radeon_connector->edid)) {
 				if (pixel_clock > 340000)
 					return true;
 				else

drivers/gpu/drm/radeon/radeon_fb.c

@@ -209,6 +209,11 @@ static int radeonfb_create(struct radeon_fbdev *rfbdev,
 							  sizes->surface_depth);
 
 	ret = radeonfb_create_pinned_object(rfbdev, &mode_cmd, &gobj);
+	if (ret) {
+		DRM_ERROR("failed to create fbcon object %d\n", ret);
+		return ret;
+	}
+
 	rbo = gem_to_radeon_bo(gobj);
 
 	/* okay we have an object now allocate the framebuffer */
@@ -220,7 +225,11 @@ static int radeonfb_create(struct radeon_fbdev *rfbdev,
 
 	info->par = rfbdev;
 
-	radeon_framebuffer_init(rdev->ddev, &rfbdev->rfb, &mode_cmd, gobj);
+	ret = radeon_framebuffer_init(rdev->ddev, &rfbdev->rfb, &mode_cmd, gobj);
+	if (ret) {
+		DRM_ERROR("failed to initalise framebuffer %d\n", ret);
+		goto out_unref;
+	}
 
 	fb = &rfbdev->rfb.base;
 

drivers/gpu/drm/radeon/radeon_mode.h

@@ -649,7 +649,7 @@ extern void radeon_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
 				     u16 blue, int regno);
 extern void radeon_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
 				     u16 *blue, int regno);
-void radeon_framebuffer_init(struct drm_device *dev,
+int radeon_framebuffer_init(struct drm_device *dev,
 			     struct radeon_framebuffer *rfb,
 			     struct drm_mode_fb_cmd2 *mode_cmd,
 			     struct drm_gem_object *obj);

drivers/hid/hid-ids.h

@@ -59,6 +59,9 @@
 #define USB_VENDOR_ID_AIRCABLE		0x16CA
 #define USB_DEVICE_ID_AIRCABLE1		0x1502
 
+#define USB_VENDOR_ID_AIREN		0x1a2c
+#define USB_DEVICE_ID_AIREN_SLIMPLUS	0x0002
+
 #define USB_VENDOR_ID_ALCOR		0x058f
 #define USB_DEVICE_ID_ALCOR_USBRS232	0x9720
 

drivers/hid/hid-input.c

@@ -986,8 +986,13 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
 		return;
 	}
 
-	/* Ignore out-of-range values as per HID specification, section 5.10 */
-	if (value < field->logical_minimum || value > field->logical_maximum) {
+	/*
+	 * Ignore out-of-range values as per HID specification,
+	 * section 5.10 and 6.2.25
+	 */
+	if ((field->flags & HID_MAIN_ITEM_VARIABLE) &&
+	    (value < field->logical_minimum ||
+	     value > field->logical_maximum)) {
 		dbg_hid("Ignoring out-of-range value %x\n", value);
 		return;
 	}

drivers/hid/usbhid/hid-quirks.c

@@ -54,6 +54,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT },
 
+	{ USB_VENDOR_ID_AIREN, USB_DEVICE_ID_AIREN_SLIMPLUS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },

drivers/hwmon/Kconfig

@@ -497,8 +497,9 @@ config SENSORS_JC42
 	  If you say yes here, you get support for JEDEC JC42.4 compliant
 	  temperature sensors, which are used on many DDR3 memory modules for
 	  mobile devices and servers.  Support will include, but not be limited
-	  to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
-	  MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
+	  to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
+	  MCP98242, MCP98243, MCP9843, SE97, SE98, STTS424(E), STTS2002,
+	  STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called jc42.

drivers/hwmon/jc42.c

@@ -64,6 +64,7 @@ static const unsigned short normal_i2c[] = {
 
 /* Manufacturer IDs */
 #define ADT_MANID		0x11d4  /* Analog Devices */
+#define ATMEL_MANID		0x001f  /* Atmel */
 #define MAX_MANID		0x004d  /* Maxim */
 #define IDT_MANID		0x00b3  /* IDT */
 #define MCP_MANID		0x0054  /* Microchip */
@@ -77,15 +78,25 @@ static const unsigned short normal_i2c[] = {
 #define ADT7408_DEVID		0x0801
 #define ADT7408_DEVID_MASK	0xffff
 
+/* Atmel */
+#define AT30TS00_DEVID		0x8201
+#define AT30TS00_DEVID_MASK	0xffff
+
 /* IDT */
 #define TS3000B3_DEVID		0x2903  /* Also matches TSE2002B3 */
 #define TS3000B3_DEVID_MASK	0xffff
 
+#define TS3000GB2_DEVID		0x2912  /* Also matches TSE2002GB2 */
+#define TS3000GB2_DEVID_MASK	0xffff
+
 /* Maxim */
 #define MAX6604_DEVID		0x3e00
 #define MAX6604_DEVID_MASK	0xffff
 
 /* Microchip */
+#define MCP9804_DEVID		0x0200
+#define MCP9804_DEVID_MASK	0xfffc
+
 #define MCP98242_DEVID		0x2000
 #define MCP98242_DEVID_MASK	0xfffc
 
@@ -113,6 +124,12 @@ static const unsigned short normal_i2c[] = {
 #define STTS424E_DEVID		0x0000
 #define STTS424E_DEVID_MASK	0xfffe
 
+#define STTS2002_DEVID		0x0300
+#define STTS2002_DEVID_MASK	0xffff
+
+#define STTS3000_DEVID		0x0200
+#define STTS3000_DEVID_MASK	0xffff
+
 static u16 jc42_hysteresis[] = { 0, 1500, 3000, 6000 };
 
 struct jc42_chips {
@@ -123,8 +140,11 @@ struct jc42_chips {
 
 static struct jc42_chips jc42_chips[] = {
 	{ ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK },
+	{ ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK },
 	{ IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK },
+	{ IDT_MANID, TS3000GB2_DEVID, TS3000GB2_DEVID_MASK },
 	{ MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
+	{ MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK },
 	{ MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
 	{ MCP_MANID, MCP98243_DEVID, MCP98243_DEVID_MASK },
 	{ MCP_MANID, MCP9843_DEVID, MCP9843_DEVID_MASK },
@@ -133,6 +153,8 @@ static struct jc42_chips jc42_chips[] = {
 	{ NXP_MANID, SE98_DEVID, SE98_DEVID_MASK },
 	{ STM_MANID, STTS424_DEVID, STTS424_DEVID_MASK },
 	{ STM_MANID, STTS424E_DEVID, STTS424E_DEVID_MASK },
+	{ STM_MANID, STTS2002_DEVID, STTS2002_DEVID_MASK },
+	{ STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK },
 };
 
 /* Each client has this additional data */
@@ -159,10 +181,12 @@ static struct jc42_data *jc42_update_device(struct device *dev);
 
 static const struct i2c_device_id jc42_id[] = {
 	{ "adt7408", 0 },
+	{ "at30ts00", 0 },
 	{ "cat94ts02", 0 },
 	{ "cat6095", 0 },
 	{ "jc42", 0 },
 	{ "max6604", 0 },
+	{ "mcp9804", 0 },
 	{ "mcp9805", 0 },
 	{ "mcp98242", 0 },
 	{ "mcp98243", 0 },
@@ -171,8 +195,10 @@ static const struct i2c_device_id jc42_id[] = {
 	{ "se97b", 0 },
 	{ "se98", 0 },
 	{ "stts424", 0 },
-	{ "tse2002b3", 0 },
-	{ "ts3000b3", 0 },
+	{ "stts2002", 0 },
+	{ "stts3000", 0 },
+	{ "tse2002", 0 },
+	{ "ts3000", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, jc42_id);

drivers/hwmon/pmbus/pmbus_core.c

@@ -54,7 +54,8 @@
 						   lcrit_alarm, crit_alarm */
 #define PMBUS_IOUT_BOOLEANS_PER_PAGE	3	/* alarm, lcrit_alarm,
 						   crit_alarm */
-#define PMBUS_POUT_BOOLEANS_PER_PAGE	2	/* alarm, crit_alarm */
+#define PMBUS_POUT_BOOLEANS_PER_PAGE	3	/* cap_alarm, alarm, crit_alarm
+						 */
 #define PMBUS_MAX_BOOLEANS_PER_FAN	2	/* alarm, fault */
 #define PMBUS_MAX_BOOLEANS_PER_TEMP	4	/* min_alarm, max_alarm,
 						   lcrit_alarm, crit_alarm */

drivers/hwmon/pmbus/zl6100.c

@@ -33,6 +33,7 @@ enum chips { zl2004, zl2005, zl2006, zl2008, zl2105, zl2106, zl6100, zl6105 };
 struct zl6100_data {
 	int id;
 	ktime_t access;		/* chip access time */
+	int delay;		/* Delay between chip accesses in uS */
 	struct pmbus_driver_info info;
 };
 
@@ -52,10 +53,10 @@ MODULE_PARM_DESC(delay, "Delay between chip accesses in uS");
 /* Some chips need a delay between accesses */
 static inline void zl6100_wait(const struct zl6100_data *data)
 {
-	if (delay) {
+	if (data->delay) {
 		s64 delta = ktime_us_delta(ktime_get(), data->access);
-		if (delta < delay)
-			udelay(delay - delta);
+		if (delta < data->delay)
+			udelay(data->delay - delta);
 	}
 }
 
@@ -207,8 +208,9 @@ static int zl6100_probe(struct i2c_client *client,
 	 * can be cleared later for additional chips if tests show that it
 	 * is not needed (in other words, better be safe than sorry).
 	 */
+	data->delay = delay;
 	if (data->id == zl2004 || data->id == zl6105)
-		delay = 0;
+		data->delay = 0;
 
 	/*
 	 * Since there was a direct I2C device access above, wait before

drivers/input/evdev.c

@@ -332,7 +332,7 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer,
 	struct evdev_client *client = file->private_data;
 	struct evdev *evdev = client->evdev;
 	struct input_event event;
-	int retval;
+	int retval = 0;
 
 	if (count < input_event_size())
 		return -EINVAL;

drivers/input/misc/twl4030-vibra.c

@@ -172,7 +172,7 @@ static void twl4030_vibra_close(struct input_dev *input)
 }
 
 /*** Module ***/
-#if CONFIG_PM
+#if CONFIG_PM_SLEEP
 static int twl4030_vibra_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -189,10 +189,10 @@ static int twl4030_vibra_resume(struct device *dev)
 	vibra_disable_leds();
 	return 0;
 }
+#endif
 
 static SIMPLE_DEV_PM_OPS(twl4030_vibra_pm_ops,
 			 twl4030_vibra_suspend, twl4030_vibra_resume);
-#endif
 
 static int __devinit twl4030_vibra_probe(struct platform_device *pdev)
 {
@@ -273,9 +273,7 @@ static struct platform_driver twl4030_vibra_driver = {
 	.driver		= {
 		.name	= "twl4030-vibra",
 		.owner	= THIS_MODULE,
-#ifdef CONFIG_PM
 		.pm	= &twl4030_vibra_pm_ops,
-#endif
 	},
 };
 module_platform_driver(twl4030_vibra_driver);

drivers/input/mouse/alps.c

@@ -952,7 +952,9 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int
 
 	/*
 	 * First try "E6 report".
-	 * ALPS should return 0,0,10 or 0,0,100
+	 * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed.
+	 * The bits 0-2 of the first byte will be 1s if some buttons are
+	 * pressed.
 	 */
 	param[0] = 0;
 	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
@@ -968,7 +970,8 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int
 	psmouse_dbg(psmouse, "E6 report: %2.2x %2.2x %2.2x",
 		    param[0], param[1], param[2]);
 
-	if (param[0] != 0 || param[1] != 0 || (param[2] != 10 && param[2] != 100))
+	if ((param[0] & 0xf8) != 0 || param[1] != 0 ||
+	    (param[2] != 10 && param[2] != 100))
 		return NULL;
 
 	/*

drivers/input/tablet/Kconfig

@@ -77,6 +77,8 @@ config TABLET_USB_WACOM
 	tristate "Wacom Intuos/Graphire tablet support (USB)"
 	depends on USB_ARCH_HAS_HCD
 	select USB
+	select NEW_LEDS
+	select LEDS_CLASS
 	help
 	  Say Y here if you want to use the USB version of the Wacom Intuos
 	  or Graphire tablet.  Make sure to say Y to "Mouse support"

drivers/input/tablet/wacom_wac.c

@@ -926,7 +926,7 @@ static int wacom_bpt3_touch(struct wacom_wac *wacom)
 {
 	struct input_dev *input = wacom->input;
 	unsigned char *data = wacom->data;
-	int count = data[1] & 0x03;
+	int count = data[1] & 0x07;
 	int i;
 
 	if (data[0] != 0x02)

drivers/iommu/amd_iommu_init.c

@@ -275,7 +275,7 @@ static void iommu_set_exclusion_range(struct amd_iommu *iommu)
 }
 
 /* Programs the physical address of the device table into the IOMMU hardware */
-static void __init iommu_set_device_table(struct amd_iommu *iommu)
+static void iommu_set_device_table(struct amd_iommu *iommu)
 {
 	u64 entry;
 

drivers/md/dm-flakey.c

@@ -323,7 +323,7 @@ static int flakey_end_io(struct dm_target *ti, struct bio *bio,
 	 * Corrupt successful READs while in down state.
 	 * If flags were specified, only corrupt those that match.
 	 */
-	if (!error && bio_submitted_while_down &&
+	if (fc->corrupt_bio_byte && !error && bio_submitted_while_down &&
 	    (bio_data_dir(bio) == READ) && (fc->corrupt_bio_rw == READ) &&
 	    all_corrupt_bio_flags_match(bio, fc))
 		corrupt_bio_data(bio, fc);

drivers/md/dm-io.c

@@ -296,6 +296,8 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where,
 	unsigned offset;
 	unsigned num_bvecs;
 	sector_t remaining = where->count;
+	struct request_queue *q = bdev_get_queue(where->bdev);
+	sector_t discard_sectors;
 
 	/*
 	 * where->count may be zero if rw holds a flush and we need to
@@ -305,9 +307,12 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where,
 		/*
 		 * Allocate a suitably sized-bio.
 		 */
-		num_bvecs = dm_sector_div_up(remaining,
-					     (PAGE_SIZE >> SECTOR_SHIFT));
-		num_bvecs = min_t(int, bio_get_nr_vecs(where->bdev), num_bvecs);
+		if (rw & REQ_DISCARD)
+			num_bvecs = 1;
+		else
+			num_bvecs = min_t(int, bio_get_nr_vecs(where->bdev),
+					  dm_sector_div_up(remaining, (PAGE_SIZE >> SECTOR_SHIFT)));
+
 		bio = bio_alloc_bioset(GFP_NOIO, num_bvecs, io->client->bios);
 		bio->bi_sector = where->sector + (where->count - remaining);
 		bio->bi_bdev = where->bdev;
@@ -315,10 +320,14 @@ static void do_region(int rw, unsigned region, struct dm_io_region *where,
 		bio->bi_destructor = dm_bio_destructor;
 		store_io_and_region_in_bio(bio, io, region);
 
-		/*
-		 * Try and add as many pages as possible.
-		 */
-		while (remaining) {
+		if (rw & REQ_DISCARD) {
+			discard_sectors = min_t(sector_t, q->limits.max_discard_sectors, remaining);
+			bio->bi_size = discard_sectors << SECTOR_SHIFT;
+			remaining -= discard_sectors;
+		} else while (remaining) {
+			/*
+			 * Try and add as many pages as possible.
+			 */
 			dp->get_page(dp, &page, &len, &offset);
 			len = min(len, to_bytes(remaining));
 			if (!bio_add_page(bio, page, len, offset))

drivers/md/dm-ioctl.c

@@ -1437,7 +1437,7 @@ static int target_message(struct dm_ioctl *param, size_t param_size)
 
 	if (!argc) {
 		DMWARN("Empty message received.");
-		goto out;
+		goto out_argv;
 	}
 
 	table = dm_get_live_table(md);

drivers/md/dm-raid.c

@@ -668,7 +668,14 @@ static int super_load(struct md_rdev *rdev, struct md_rdev *refdev)
 		return ret;
 
 	sb = page_address(rdev->sb_page);
-	if (sb->magic != cpu_to_le32(DM_RAID_MAGIC)) {
+
+	/*
+	 * Two cases that we want to write new superblocks and rebuild:
+	 * 1) New device (no matching magic number)
+	 * 2) Device specified for rebuild (!In_sync w/ offset == 0)
+	 */
+	if ((sb->magic != cpu_to_le32(DM_RAID_MAGIC)) ||
+	    (!test_bit(In_sync, &rdev->flags) && !rdev->recovery_offset)) {
 		super_sync(rdev->mddev, rdev);
 
 		set_bit(FirstUse, &rdev->flags);
@@ -745,11 +752,8 @@ static int super_init_validation(struct mddev *mddev, struct md_rdev *rdev)
 	 */
 	rdev_for_each(r, t, mddev) {
 		if (!test_bit(In_sync, &r->flags)) {
-			if (!test_bit(FirstUse, &r->flags))
-				DMERR("Superblock area of "
-				      "rebuild device %d should have been "
-				      "cleared.", r->raid_disk);
-			set_bit(FirstUse, &r->flags);
+			DMINFO("Device %d specified for rebuild: "
+			       "Clearing superblock", r->raid_disk);
 			rebuilds++;
 		} else if (test_bit(FirstUse, &r->flags))
 			new_devs++;
@@ -971,6 +975,7 @@ static int raid_ctr(struct dm_target *ti, unsigned argc, char **argv)
 
 	INIT_WORK(&rs->md.event_work, do_table_event);
 	ti->private = rs;
+	ti->num_flush_requests = 1;
 
 	mutex_lock(&rs->md.reconfig_mutex);
 	ret = md_run(&rs->md);

drivers/md/dm-thin-metadata.c

@@ -385,6 +385,7 @@ static int init_pmd(struct dm_pool_metadata *pmd,
 		data_sm = dm_sm_disk_create(tm, nr_blocks);
 		if (IS_ERR(data_sm)) {
 			DMERR("sm_disk_create failed");
+			dm_tm_unlock(tm, sblock);
 			r = PTR_ERR(data_sm);
 			goto bad;
 		}
@@ -789,6 +790,11 @@ int dm_pool_metadata_close(struct dm_pool_metadata *pmd)
 	return 0;
 }
 
+/*
+ * __open_device: Returns @td corresponding to device with id @dev,
+ * creating it if @create is set and incrementing @td->open_count.
+ * On failure, @td is undefined.
+ */
 static int __open_device(struct dm_pool_metadata *pmd,
 			 dm_thin_id dev, int create,
 			 struct dm_thin_device **td)
@@ -799,10 +805,16 @@ static int __open_device(struct dm_pool_metadata *pmd,
 	struct disk_device_details details_le;
 
 	/*
-	 * Check the device isn't already open.
+	 * If the device is already open, return it.
 	 */
 	list_for_each_entry(td2, &pmd->thin_devices, list)
 		if (td2->id == dev) {
+			/*
+			 * May not create an already-open device.
+			 */
+			if (create)
+				return -EEXIST;
+
 			td2->open_count++;
 			*td = td2;
 			return 0;
@@ -817,6 +829,9 @@ static int __open_device(struct dm_pool_metadata *pmd,
 		if (r != -ENODATA || !create)
 			return r;
 
+		/*
+		 * Create new device.
+		 */
 		changed = 1;
 		details_le.mapped_blocks = 0;
 		details_le.transaction_id = cpu_to_le64(pmd->trans_id);
@@ -882,12 +897,10 @@ static int __create_thin(struct dm_pool_metadata *pmd,
 
 	r = __open_device(pmd, dev, 1, &td);
 	if (r) {
-		__close_device(td);
 		dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root);
 		dm_btree_del(&pmd->bl_info, dev_root);
 		return r;
 	}
-	td->changed = 1;
 	__close_device(td);
 
 	return r;
@@ -967,14 +980,14 @@ static int __create_snap(struct dm_pool_metadata *pmd,
 		goto bad;
 
 	r = __set_snapshot_details(pmd, td, origin, pmd->time);
+	__close_device(td);
+
 	if (r)
 		goto bad;
 
-	__close_device(td);
 	return 0;
 
 bad:
-	__close_device(td);
 	dm_btree_remove(&pmd->tl_info, pmd->root, &key, &pmd->root);
 	dm_btree_remove(&pmd->details_info, pmd->details_root,
 			&key, &pmd->details_root);
@@ -1211,6 +1224,8 @@ static int __remove(struct dm_thin_device *td, dm_block_t block)
 	if (r)
 		return r;
 
+	td->mapped_blocks--;
+	td->changed = 1;
 	pmd->need_commit = 1;
 
 	return 0;

drivers/md/raid1.c

@@ -624,7 +624,7 @@ int md_raid1_congested(struct mddev *mddev, int bits)
 		return 1;
 
 	rcu_read_lock();
-	for (i = 0; i < conf->raid_disks; i++) {
+	for (i = 0; i < conf->raid_disks * 2; i++) {
 		struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev);
 		if (rdev && !test_bit(Faulty, &rdev->flags)) {
 			struct request_queue *q = bdev_get_queue(rdev->bdev);