Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 8688a1a8 编写于 作者: R Russell King
浏览文件
操作

Merge branch 'master' of... 

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-tcc into devel-stable
上级 3afdb0f3 f91f9cd5
展开全部 隐藏空白更改
内联 并排
Showing with 3262 addition and 1558 deletion
.gitignore
浏览文件 @ 8688a1a8
......@@ -28,6 +28,7 @@ modules.builtin
*.gz
*.bz2
*.lzma
*.xz
*.lzo
*.patch
*.gcno
......
Documentation/networking/00-INDEX
浏览文件 @ 8688a1a8
......@@ -40,8 +40,6 @@ decnet.txt
- info on using the DECnet networking layer in Linux.
depca.txt
- the Digital DEPCA/EtherWORKS DE1?? and DE2?? LANCE Ethernet driver
dgrs.txt
- the Digi International RightSwitch SE-X Ethernet driver
dmfe.txt
- info on the Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver.
e100.txt
......@@ -50,8 +48,6 @@ e1000.txt
- info on Intel's E1000 line of gigabit ethernet boards
eql.txt
- serial IP load balancing
ethertap.txt
- the Ethertap user space packet reception and transmission driver
ewrk3.txt
- the Digital EtherWORKS 3 DE203/4/5 Ethernet driver
filter.txt
......@@ -104,8 +100,6 @@ tuntap.txt
- TUN/TAP device driver, allowing user space Rx/Tx of packets.
vortex.txt
- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
wavelan.txt
- AT&T GIS (nee NCR) WaveLAN card: An Ethernet-like radio transceiver
x25.txt
- general info on X.25 development.
x25-iface.txt
......
Documentation/networking/dns_resolver.txt
浏览文件 @ 8688a1a8
......@@ -61,7 +61,6 @@ before the more general line given above as the first match is the one taken.
create dns_resolver foo:* * /usr/sbin/dns.foo %k
=====
USAGE
=====
......@@ -104,6 +103,14 @@ implemented in the module can be called after doing:
returned also.
===============================
READING DNS KEYS FROM USERSPACE
===============================
Keys of dns_resolver type can be read from userspace using keyctl_read() or
"keyctl read/print/pipe".
=========
MECHANISM
=========
......
MAINTAINERS
浏览文件 @ 8688a1a8
......@@ -1010,6 +1010,15 @@ L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-s5p*/
ARM/SAMSUNG MOBILE MACHINE SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-s5pv210/mach-aquila.c
F: arch/arm/mach-s5pv210/mach-goni.c
F: arch/arm/mach-exynos4/mach-universal_c210.c
F: arch/arm/mach-exynos4/mach-nuri.c
ARM/SAMSUNG S5P SERIES FIMC SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
......@@ -1467,6 +1476,7 @@ F: include/net/bluetooth/
BONDING DRIVER
M: Jay Vosburgh <fubar@us.ibm.com>
M: Andy Gospodarek <andy@greyhouse.net>
L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/bonding/
S: Supported
......@@ -1692,6 +1702,13 @@ M: Andy Whitcroft <apw@canonical.com>
S: Supported
F: scripts/checkpatch.pl
CHINESE DOCUMENTATION
M: Harry Wei <harryxiyou@gmail.com>
L: xiyoulinuxkernelgroup@googlegroups.com
L: linux-kernel@zh-kernel.org (moderated for non-subscribers)
S: Maintained
F: Documentation/zh_CN/
CISCO VIC ETHERNET NIC DRIVER
M: Vasanthy Kolluri <vkolluri@cisco.com>
M: Roopa Prabhu <roprabhu@cisco.com>
......@@ -2026,7 +2043,7 @@ F: Documentation/scsi/dc395x.txt
F: drivers/scsi/dc395x.*
DCCP PROTOCOL
M: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
M: Gerrit Renker <gerrit@erg.abdn.ac.uk>
L: dccp@vger.kernel.org
W: http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp
S: Maintained
......@@ -3512,7 +3529,7 @@ F: drivers/hwmon/jc42.c
F: Documentation/hwmon/jc42
JFS FILESYSTEM
M: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
M: Dave Kleikamp <shaggy@kernel.org>
L: jfs-discussion@lists.sourceforge.net
W: http://jfs.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
......@@ -5164,6 +5181,7 @@ F: drivers/char/random.c
RAPIDIO SUBSYSTEM
M: Matt Porter <mporter@kernel.crashing.org>
M: Alexandre Bounine <alexandre.bounine@idt.com>
S: Maintained
F: drivers/rapidio/
......@@ -5266,7 +5284,7 @@ S: Maintained
F: drivers/net/wireless/rtl818x/rtl8180/
RTL8187 WIRELESS DRIVER
M: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
M: Herton Ronaldo Krzesinski <herton@canonical.com>
M: Hin-Tak Leung <htl10@users.sourceforge.net>
M: Larry Finger <Larry.Finger@lwfinger.net>
L: linux-wireless@vger.kernel.org
......@@ -6104,7 +6122,7 @@ S: Maintained
F: security/tomoyo/
TOPSTAR LAPTOP EXTRAS DRIVER
M: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
M: Herton Ronaldo Krzesinski <herton@canonical.com>
L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/topstar-laptop.c
......
Makefile
浏览文件 @ 8688a1a8
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 38
EXTRAVERSION = -rc6
EXTRAVERSION = -rc8
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
......
arch/alpha/Kconfig
浏览文件 @ 8688a1a8
......@@ -11,6 +11,7 @@ config ALPHA
select HAVE_GENERIC_HARDIRQS
select GENERIC_IRQ_PROBE
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_HARDIRQS_NO_DEPRECATED
help
The Alpha is a 64-bit general-purpose processor designed and
marketed by the Digital Equipment Corporation of blessed memory,
......
arch/alpha/kernel/irq.c
浏览文件 @ 8688a1a8
......@@ -44,11 +44,16 @@ static char irq_user_affinity[NR_IRQS];
int irq_select_affinity(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc[irq];
struct irq_data *data = irq_get_irq_data(irq);
struct irq_chip *chip;
static int last_cpu;
int cpu = last_cpu + 1;
if (!desc || !get_irq_desc_chip(desc)->set_affinity || irq_user_affinity[irq])
if (!data)
return 1;
chip = irq_data_get_irq_chip(data);
if (!chip->irq_set_affinity || irq_user_affinity[irq])
return 1;
while (!cpu_possible(cpu) ||
......@@ -56,8 +61,8 @@ int irq_select_affinity(unsigned int irq)
cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
last_cpu = cpu;
cpumask_copy(desc->affinity, cpumask_of(cpu));
get_irq_desc_chip(desc)->set_affinity(irq, cpumask_of(cpu));
cpumask_copy(data->affinity, cpumask_of(cpu));
chip->irq_set_affinity(data, cpumask_of(cpu), false);
return 0;
}
#endif /* CONFIG_SMP */
......
arch/alpha/kernel/irq_alpha.c
浏览文件 @ 8688a1a8
......@@ -228,14 +228,9 @@ struct irqaction timer_irqaction = {
void __init
init_rtc_irq(void)
{
struct irq_desc *desc = irq_to_desc(RTC_IRQ);
if (desc) {
desc->status |= IRQ_DISABLED;
set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
handle_simple_irq, "RTC");
setup_irq(RTC_IRQ, &timer_irqaction);
}
set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
handle_simple_irq, "RTC");
setup_irq(RTC_IRQ, &timer_irqaction);
}
/* Dummy irqactions. */
......
arch/alpha/kernel/irq_i8259.c
浏览文件 @ 8688a1a8
......@@ -33,10 +33,10 @@ i8259_update_irq_hw(unsigned int irq, unsigned long mask)
}
inline void
i8259a_enable_irq(unsigned int irq)
i8259a_enable_irq(struct irq_data *d)
{
spin_lock(&i8259_irq_lock);
i8259_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq));
i8259_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
spin_unlock(&i8259_irq_lock);
}
......@@ -47,16 +47,18 @@ __i8259a_disable_irq(unsigned int irq)
}
void
i8259a_disable_irq(unsigned int irq)
i8259a_disable_irq(struct irq_data *d)
{
spin_lock(&i8259_irq_lock);
__i8259a_disable_irq(irq);
__i8259a_disable_irq(d->irq);
spin_unlock(&i8259_irq_lock);
}
void
i8259a_mask_and_ack_irq(unsigned int irq)
i8259a_mask_and_ack_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
spin_lock(&i8259_irq_lock);
__i8259a_disable_irq(irq);
......@@ -71,9 +73,9 @@ i8259a_mask_and_ack_irq(unsigned int irq)
struct irq_chip i8259a_irq_type = {
.name = "XT-PIC",
.unmask = i8259a_enable_irq,
.mask = i8259a_disable_irq,
.mask_ack = i8259a_mask_and_ack_irq,
.irq_unmask = i8259a_enable_irq,
.irq_mask = i8259a_disable_irq,
.irq_mask_ack = i8259a_mask_and_ack_irq,
};
void __init
......
arch/alpha/kernel/irq_impl.h
浏览文件 @ 8688a1a8
......@@ -31,11 +31,9 @@ extern void init_rtc_irq(void);
extern void common_init_isa_dma(void);
extern void i8259a_enable_irq(unsigned int);
extern void i8259a_disable_irq(unsigned int);
extern void i8259a_mask_and_ack_irq(unsigned int);
extern unsigned int i8259a_startup_irq(unsigned int);
extern void i8259a_end_irq(unsigned int);
extern void i8259a_enable_irq(struct irq_data *d);
extern void i8259a_disable_irq(struct irq_data *d);
extern void i8259a_mask_and_ack_irq(struct irq_data *d);
extern struct irq_chip i8259a_irq_type;
extern void init_i8259a_irqs(void);
......
arch/alpha/kernel/irq_pyxis.c
浏览文件 @ 8688a1a8
......@@ -29,21 +29,21 @@ pyxis_update_irq_hw(unsigned long mask)
}
static inline void
pyxis_enable_irq(unsigned int irq)
pyxis_enable_irq(struct irq_data *d)
{
pyxis_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
pyxis_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
}
static void
pyxis_disable_irq(unsigned int irq)
pyxis_disable_irq(struct irq_data *d)
{
pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
}
static void
pyxis_mask_and_ack_irq(unsigned int irq)
pyxis_mask_and_ack_irq(struct irq_data *d)
{
unsigned long bit = 1UL << (irq - 16);
unsigned long bit = 1UL << (d->irq - 16);
unsigned long mask = cached_irq_mask &= ~bit;
/* Disable the interrupt. */
......@@ -58,9 +58,9 @@ pyxis_mask_and_ack_irq(unsigned int irq)
static struct irq_chip pyxis_irq_type = {
.name = "PYXIS",
.mask_ack = pyxis_mask_and_ack_irq,
.mask = pyxis_disable_irq,
.unmask = pyxis_enable_irq,
.irq_mask_ack = pyxis_mask_and_ack_irq,
.irq_mask = pyxis_disable_irq,
.irq_unmask = pyxis_enable_irq,
};
void
......@@ -103,7 +103,7 @@ init_pyxis_irqs(unsigned long ignore_mask)
if ((ignore_mask >> i) & 1)
continue;
set_irq_chip_and_handler(i, &pyxis_irq_type, handle_level_irq);
irq_to_desc(i)->status |= IRQ_LEVEL;
irq_set_status_flags(i, IRQ_LEVEL);
}
setup_irq(16+7, &isa_cascade_irqaction);
......
arch/alpha/kernel/irq_srm.c
浏览文件 @ 8688a1a8
......@@ -18,27 +18,27 @@
DEFINE_SPINLOCK(srm_irq_lock);
static inline void
srm_enable_irq(unsigned int irq)
srm_enable_irq(struct irq_data *d)
{
spin_lock(&srm_irq_lock);
cserve_ena(irq - 16);
cserve_ena(d->irq - 16);
spin_unlock(&srm_irq_lock);
}
static void
srm_disable_irq(unsigned int irq)
srm_disable_irq(struct irq_data *d)
{
spin_lock(&srm_irq_lock);
cserve_dis(irq - 16);
cserve_dis(d->irq - 16);
spin_unlock(&srm_irq_lock);
}
/* Handle interrupts from the SRM, assuming no additional weirdness. */
static struct irq_chip srm_irq_type = {
.name = "SRM",
.unmask = srm_enable_irq,
.mask = srm_disable_irq,
.mask_ack = srm_disable_irq,
.irq_unmask = srm_enable_irq,
.irq_mask = srm_disable_irq,
.irq_mask_ack = srm_disable_irq,
};
void __init
......@@ -52,7 +52,7 @@ init_srm_irqs(long max, unsigned long ignore_mask)
if (i < 64 && ((ignore_mask >> i) & 1))
continue;
set_irq_chip_and_handler(i, &srm_irq_type, handle_level_irq);
irq_to_desc(i)->status |= IRQ_LEVEL;
irq_set_status_flags(i, IRQ_LEVEL);
}
}
......
arch/alpha/kernel/sys_alcor.c
浏览文件 @ 8688a1a8
......@@ -44,31 +44,31 @@ alcor_update_irq_hw(unsigned long mask)
}
static inline void
alcor_enable_irq(unsigned int irq)
alcor_enable_irq(struct irq_data *d)
{
alcor_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
alcor_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
}
static void
alcor_disable_irq(unsigned int irq)
alcor_disable_irq(struct irq_data *d)
{
alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
}
static void
alcor_mask_and_ack_irq(unsigned int irq)
alcor_mask_and_ack_irq(struct irq_data *d)
{
alcor_disable_irq(irq);
alcor_disable_irq(d);
/* On ALCOR/XLT, need to dismiss interrupt via GRU. */
*(vuip)GRU_INT_CLEAR = 1 << (irq - 16); mb();
*(vuip)GRU_INT_CLEAR = 1 << (d->irq - 16); mb();
*(vuip)GRU_INT_CLEAR = 0; mb();
}
static void
alcor_isa_mask_and_ack_irq(unsigned int irq)
alcor_isa_mask_and_ack_irq(struct irq_data *d)
{
i8259a_mask_and_ack_irq(irq);
i8259a_mask_and_ack_irq(d);
/* On ALCOR/XLT, need to dismiss interrupt via GRU. */
*(vuip)GRU_INT_CLEAR = 0x80000000; mb();
......@@ -77,9 +77,9 @@ alcor_isa_mask_and_ack_irq(unsigned int irq)
static struct irq_chip alcor_irq_type = {
.name = "ALCOR",
.unmask = alcor_enable_irq,
.mask = alcor_disable_irq,
.mask_ack = alcor_mask_and_ack_irq,
.irq_unmask = alcor_enable_irq,
.irq_mask = alcor_disable_irq,
.irq_mask_ack = alcor_mask_and_ack_irq,
};
static void
......@@ -126,9 +126,9 @@ alcor_init_irq(void)
if (i >= 16+20 && i <= 16+30)
continue;
set_irq_chip_and_handler(i, &alcor_irq_type, handle_level_irq);
irq_to_desc(i)->status |= IRQ_LEVEL;
irq_set_status_flags(i, IRQ_LEVEL);
}
i8259a_irq_type.ack = alcor_isa_mask_and_ack_irq;
i8259a_irq_type.irq_ack = alcor_isa_mask_and_ack_irq;
init_i8259a_irqs();
common_init_isa_dma();
......
arch/alpha/kernel/sys_cabriolet.c
浏览文件 @ 8688a1a8
......@@ -46,22 +46,22 @@ cabriolet_update_irq_hw(unsigned int irq, unsigned long mask)
}
static inline void
cabriolet_enable_irq(unsigned int irq)
cabriolet_enable_irq(struct irq_data *d)
{
cabriolet_update_irq_hw(irq, cached_irq_mask &= ~(1UL << irq));
cabriolet_update_irq_hw(d->irq, cached_irq_mask &= ~(1UL << d->irq));
}
static void
cabriolet_disable_irq(unsigned int irq)
cabriolet_disable_irq(struct irq_data *d)
{
cabriolet_update_irq_hw(irq, cached_irq_mask |= 1UL << irq);
cabriolet_update_irq_hw(d->irq, cached_irq_mask |= 1UL << d->irq);
}
static struct irq_chip cabriolet_irq_type = {
.name = "CABRIOLET",
.unmask = cabriolet_enable_irq,
.mask = cabriolet_disable_irq,
.mask_ack = cabriolet_disable_irq,
.irq_unmask = cabriolet_enable_irq,
.irq_mask = cabriolet_disable_irq,
.irq_mask_ack = cabriolet_disable_irq,
};
static void
......@@ -107,7 +107,7 @@ common_init_irq(void (*srm_dev_int)(unsigned long v))
for (i = 16; i < 35; ++i) {
set_irq_chip_and_handler(i, &cabriolet_irq_type,
handle_level_irq);
irq_to_desc(i)->status |= IRQ_LEVEL;
irq_set_status_flags(i, IRQ_LEVEL);
}
}
......
arch/alpha/kernel/sys_dp264.c
浏览文件 @ 8688a1a8
......@@ -98,37 +98,37 @@ tsunami_update_irq_hw(unsigned long mask)
}
static void
dp264_enable_irq(unsigned int irq)
dp264_enable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
cached_irq_mask |= 1UL << irq;
cached_irq_mask |= 1UL << d->irq;
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
dp264_disable_irq(unsigned int irq)
dp264_disable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
cached_irq_mask &= ~(1UL << irq);
cached_irq_mask &= ~(1UL << d->irq);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
clipper_enable_irq(unsigned int irq)
clipper_enable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
cached_irq_mask |= 1UL << (irq - 16);
cached_irq_mask |= 1UL << (d->irq - 16);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
static void
clipper_disable_irq(unsigned int irq)
clipper_disable_irq(struct irq_data *d)
{
spin_lock(&dp264_irq_lock);
cached_irq_mask &= ~(1UL << (irq - 16));
cached_irq_mask &= ~(1UL << (d->irq - 16));
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
}
......@@ -149,10 +149,11 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
}
static int
dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
{
dp264_set_affinity(struct irq_data *d, const struct cpumask *affinity,
bool force)
{
spin_lock(&dp264_irq_lock);
cpu_set_irq_affinity(irq, *affinity);
cpu_set_irq_affinity(d->irq, *affinity);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
......@@ -160,10 +161,11 @@ dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
}
static int
clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
{
clipper_set_affinity(struct irq_data *d, const struct cpumask *affinity,
bool force)
{
spin_lock(&dp264_irq_lock);
cpu_set_irq_affinity(irq - 16, *affinity);
cpu_set_irq_affinity(d->irq - 16, *affinity);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
......@@ -171,19 +173,19 @@ clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
}
static struct irq_chip dp264_irq_type = {
.name = "DP264",
.unmask = dp264_enable_irq,
.mask = dp264_disable_irq,
.mask_ack = dp264_disable_irq,
.set_affinity = dp264_set_affinity,
.name = "DP264",
.irq_unmask = dp264_enable_irq,
.irq_mask = dp264_disable_irq,
.irq_mask_ack = dp264_disable_irq,
.irq_set_affinity = dp264_set_affinity,
};
static struct irq_chip clipper_irq_type = {
.name = "CLIPPER",
.unmask = clipper_enable_irq,
.mask = clipper_disable_irq,
.mask_ack = clipper_disable_irq,
.set_affinity = clipper_set_affinity,
.name = "CLIPPER",
.irq_unmask = clipper_enable_irq,
.irq_mask = clipper_disable_irq,
.irq_mask_ack = clipper_disable_irq,
.irq_set_affinity = clipper_set_affinity,
};
static void
......@@ -268,8 +270,8 @@ init_tsunami_irqs(struct irq_chip * ops, int imin, int imax)
{
long i;
for (i = imin; i <= imax; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, ops, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
}
......
arch/alpha/kernel/sys_eb64p.c
浏览文件 @ 8688a1a8
......@@ -44,22 +44,22 @@ eb64p_update_irq_hw(unsigned int irq, unsigned long mask)
}
static inline void
eb64p_enable_irq(unsigned int irq)
eb64p_enable_irq(struct irq_data *d)
{
eb64p_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq));
eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
}
static void
eb64p_disable_irq(unsigned int irq)
eb64p_disable_irq(struct irq_data *d)
{
eb64p_update_irq_hw(irq, cached_irq_mask |= 1 << irq);
eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq);
}
static struct irq_chip eb64p_irq_type = {
.name = "EB64P",
.unmask = eb64p_enable_irq,
.mask = eb64p_disable_irq,
.mask_ack = eb64p_disable_irq,
.irq_unmask = eb64p_enable_irq,
.irq_mask = eb64p_disable_irq,
.irq_mask_ack = eb64p_disable_irq,
};
static void
......@@ -118,9 +118,9 @@ eb64p_init_irq(void)
init_i8259a_irqs();
for (i = 16; i < 32; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
}
irq_set_status_flags(i, IRQ_LEVEL);
}
common_init_isa_dma();
setup_irq(16+5, &isa_cascade_irqaction);
......
arch/alpha/kernel/sys_eiger.c
浏览文件 @ 8688a1a8
......@@ -51,16 +51,18 @@ eiger_update_irq_hw(unsigned long irq, unsigned long mask)
}
static inline void
eiger_enable_irq(unsigned int irq)
eiger_enable_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] &= ~(1UL << (irq & 63)));
eiger_update_irq_hw(irq, mask);
}
static void
eiger_disable_irq(unsigned int irq)
eiger_disable_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] |= 1UL << (irq & 63));
eiger_update_irq_hw(irq, mask);
......@@ -68,9 +70,9 @@ eiger_disable_irq(unsigned int irq)
static struct irq_chip eiger_irq_type = {
.name = "EIGER",
.unmask = eiger_enable_irq,
.mask = eiger_disable_irq,
.mask_ack = eiger_disable_irq,
.irq_unmask = eiger_enable_irq,
.irq_mask = eiger_disable_irq,
.irq_mask_ack = eiger_disable_irq,
};
static void
......@@ -136,8 +138,8 @@ eiger_init_irq(void)
init_i8259a_irqs();
for (i = 16; i < 128; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &eiger_irq_type, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
}
......
arch/alpha/kernel/sys_jensen.c
浏览文件 @ 8688a1a8
......@@ -63,34 +63,34 @@
*/
static void
jensen_local_enable(unsigned int irq)
jensen_local_enable(struct irq_data *d)
{
/* the parport is really hw IRQ 1, silly Jensen. */
if (irq == 7)
i8259a_enable_irq(1);
if (d->irq == 7)
i8259a_enable_irq(d);
}
static void
jensen_local_disable(unsigned int irq)
jensen_local_disable(struct irq_data *d)
{
/* the parport is really hw IRQ 1, silly Jensen. */
if (irq == 7)
i8259a_disable_irq(1);
if (d->irq == 7)
i8259a_disable_irq(d);
}
static void
jensen_local_mask_ack(unsigned int irq)
jensen_local_mask_ack(struct irq_data *d)
{
/* the parport is really hw IRQ 1, silly Jensen. */
if (irq == 7)
i8259a_mask_and_ack_irq(1);
if (d->irq == 7)
i8259a_mask_and_ack_irq(d);
}
static struct irq_chip jensen_local_irq_type = {
.name = "LOCAL",
.unmask = jensen_local_enable,
.mask = jensen_local_disable,
.mask_ack = jensen_local_mask_ack,
.irq_unmask = jensen_local_enable,
.irq_mask = jensen_local_disable,
.irq_mask_ack = jensen_local_mask_ack,
};
static void
......
arch/alpha/kernel/sys_marvel.c
浏览文件 @ 8688a1a8
......@@ -104,9 +104,10 @@ io7_get_irq_ctl(unsigned int irq, struct io7 **pio7)
}
static void
io7_enable_irq(unsigned int irq)
io7_enable_irq(struct irq_data *d)
{
volatile unsigned long *ctl;
unsigned int irq = d->irq;
struct io7 *io7;
ctl = io7_get_irq_ctl(irq, &io7);
......@@ -115,7 +116,7 @@ io7_enable_irq(unsigned int irq)
__func__, irq);
return;
}
spin_lock(&io7->irq_lock);
*ctl |= 1UL << 24;
mb();
......@@ -124,9 +125,10 @@ io7_enable_irq(unsigned int irq)
}
static void
io7_disable_irq(unsigned int irq)
io7_disable_irq(struct irq_data *d)
{
volatile unsigned long *ctl;
unsigned int irq = d->irq;
struct io7 *io7;
ctl = io7_get_irq_ctl(irq, &io7);
......@@ -135,7 +137,7 @@ io7_disable_irq(unsigned int irq)
__func__, irq);
return;
}
spin_lock(&io7->irq_lock);
*ctl &= ~(1UL << 24);
mb();
......@@ -144,35 +146,29 @@ io7_disable_irq(unsigned int irq)
}
static void
marvel_irq_noop(unsigned int irq)
{
return;
}
static unsigned int
marvel_irq_noop_return(unsigned int irq)
{
return 0;
marvel_irq_noop(struct irq_data *d)
{
return;
}
static struct irq_chip marvel_legacy_irq_type = {
.name = "LEGACY",
.mask = marvel_irq_noop,
.unmask = marvel_irq_noop,
.irq_mask = marvel_irq_noop,
.irq_unmask = marvel_irq_noop,
};
static struct irq_chip io7_lsi_irq_type = {
.name = "LSI",
.unmask = io7_enable_irq,
.mask = io7_disable_irq,
.mask_ack = io7_disable_irq,
.irq_unmask = io7_enable_irq,
.irq_mask = io7_disable_irq,
.irq_mask_ack = io7_disable_irq,
};
static struct irq_chip io7_msi_irq_type = {
.name = "MSI",
.unmask = io7_enable_irq,
.mask = io7_disable_irq,
.ack = marvel_irq_noop,
.irq_unmask = io7_enable_irq,
.irq_mask = io7_disable_irq,
.irq_ack = marvel_irq_noop,
};
static void
......@@ -280,8 +276,8 @@ init_io7_irqs(struct io7 *io7,
/* Set up the lsi irqs. */
for (i = 0; i < 128; ++i) {
irq_to_desc(base + i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(base + i, lsi_ops, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
/* Disable the implemented irqs in hardware. */
......@@ -294,8 +290,8 @@ init_io7_irqs(struct io7 *io7,
/* Set up the msi irqs. */
for (i = 128; i < (128 + 512); ++i) {
irq_to_desc(base + i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(base + i, msi_ops, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
for (i = 0; i < 16; ++i)
......
arch/alpha/kernel/sys_mikasa.c
浏览文件 @ 8688a1a8
......@@ -43,22 +43,22 @@ mikasa_update_irq_hw(int mask)
}
static inline void
mikasa_enable_irq(unsigned int irq)
mikasa_enable_irq(struct irq_data *d)
{
mikasa_update_irq_hw(cached_irq_mask |= 1 << (irq - 16));
mikasa_update_irq_hw(cached_irq_mask |= 1 << (d->irq - 16));
}
static void
mikasa_disable_irq(unsigned int irq)
mikasa_disable_irq(struct irq_data *d)
{
mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (irq - 16)));
mikasa_update_irq_hw(cached_irq_mask &= ~(1 << (d->irq - 16)));
}
static struct irq_chip mikasa_irq_type = {
.name = "MIKASA",
.unmask = mikasa_enable_irq,
.mask = mikasa_disable_irq,
.mask_ack = mikasa_disable_irq,
.irq_unmask = mikasa_enable_irq,
.irq_mask = mikasa_disable_irq,
.irq_mask_ack = mikasa_disable_irq,
};
static void
......@@ -98,8 +98,8 @@ mikasa_init_irq(void)
mikasa_update_irq_hw(0);
for (i = 16; i < 32; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &mikasa_irq_type, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();
......
arch/alpha/kernel/sys_noritake.c
浏览文件 @ 8688a1a8
......@@ -48,22 +48,22 @@ noritake_update_irq_hw(int irq, int mask)
}
static void
noritake_enable_irq(unsigned int irq)
noritake_enable_irq(struct irq_data *d)
{
noritake_update_irq_hw(irq, cached_irq_mask |= 1 << (irq - 16));
noritake_update_irq_hw(d->irq, cached_irq_mask |= 1 << (d->irq - 16));
}
static void
noritake_disable_irq(unsigned int irq)
noritake_disable_irq(struct irq_data *d)
{
noritake_update_irq_hw(irq, cached_irq_mask &= ~(1 << (irq - 16)));
noritake_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << (d->irq - 16)));
}
static struct irq_chip noritake_irq_type = {
.name = "NORITAKE",
.unmask = noritake_enable_irq,
.mask = noritake_disable_irq,
.mask_ack = noritake_disable_irq,
.irq_unmask = noritake_enable_irq,
.irq_mask = noritake_disable_irq,
.irq_mask_ack = noritake_disable_irq,
};
static void
......@@ -127,8 +127,8 @@ noritake_init_irq(void)
outw(0, 0x54c);
for (i = 16; i < 48; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &noritake_irq_type, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();
......
arch/alpha/kernel/sys_rawhide.c
浏览文件 @ 8688a1a8
......@@ -56,9 +56,10 @@ rawhide_update_irq_hw(int hose, int mask)
(((h) < MCPCIA_MAX_HOSES) && (cached_irq_masks[(h)] != 0))
static inline void
rawhide_enable_irq(unsigned int irq)
rawhide_enable_irq(struct irq_data *d)
{
unsigned int mask, hose;
unsigned int irq = d->irq;
irq -= 16;
hose = irq / 24;
......@@ -76,9 +77,10 @@ rawhide_enable_irq(unsigned int irq)
}
static void
rawhide_disable_irq(unsigned int irq)
rawhide_disable_irq(struct irq_data *d)
{
unsigned int mask, hose;
unsigned int irq = d->irq;
irq -= 16;
hose = irq / 24;
......@@ -96,9 +98,10 @@ rawhide_disable_irq(unsigned int irq)
}
static void
rawhide_mask_and_ack_irq(unsigned int irq)
rawhide_mask_and_ack_irq(struct irq_data *d)
{
unsigned int mask, mask1, hose;
unsigned int irq = d->irq;
irq -= 16;
hose = irq / 24;
......@@ -123,9 +126,9 @@ rawhide_mask_and_ack_irq(unsigned int irq)
static struct irq_chip rawhide_irq_type = {
.name = "RAWHIDE",
.unmask = rawhide_enable_irq,
.mask = rawhide_disable_irq,
.mask_ack = rawhide_mask_and_ack_irq,
.irq_unmask = rawhide_enable_irq,
.irq_mask = rawhide_disable_irq,
.irq_mask_ack = rawhide_mask_and_ack_irq,
};
static void
......@@ -177,8 +180,8 @@ rawhide_init_irq(void)
}
for (i = 16; i < 128; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &rawhide_irq_type, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();
......
arch/alpha/kernel/sys_rx164.c
浏览文件 @ 8688a1a8
......@@ -47,22 +47,22 @@ rx164_update_irq_hw(unsigned long mask)
}
static inline void
rx164_enable_irq(unsigned int irq)
rx164_enable_irq(struct irq_data *d)
{
rx164_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
rx164_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
}
static void
rx164_disable_irq(unsigned int irq)
rx164_disable_irq(struct irq_data *d)
{
rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
}
static struct irq_chip rx164_irq_type = {
.name = "RX164",
.unmask = rx164_enable_irq,
.mask = rx164_disable_irq,
.mask_ack = rx164_disable_irq,
.irq_unmask = rx164_enable_irq,
.irq_mask = rx164_disable_irq,
.irq_mask_ack = rx164_disable_irq,
};
static void
......@@ -99,8 +99,8 @@ rx164_init_irq(void)
rx164_update_irq_hw(0);
for (i = 16; i < 40; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &rx164_irq_type, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
init_i8259a_irqs();
......
arch/alpha/kernel/sys_sable.c
浏览文件 @ 8688a1a8
......@@ -443,11 +443,11 @@ lynx_swizzle(struct pci_dev *dev, u8 *pinp)
/* GENERIC irq routines */
static inline void
sable_lynx_enable_irq(unsigned int irq)
sable_lynx_enable_irq(struct irq_data *d)
{
unsigned long bit, mask;
bit = sable_lynx_irq_swizzle->irq_to_mask[irq];
bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
spin_lock(&sable_lynx_irq_lock);
mask = sable_lynx_irq_swizzle->shadow_mask &= ~(1UL << bit);
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
......@@ -459,11 +459,11 @@ sable_lynx_enable_irq(unsigned int irq)
}
static void
sable_lynx_disable_irq(unsigned int irq)
sable_lynx_disable_irq(struct irq_data *d)
{
unsigned long bit, mask;
bit = sable_lynx_irq_swizzle->irq_to_mask[irq];
bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
spin_lock(&sable_lynx_irq_lock);
mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
......@@ -475,11 +475,11 @@ sable_lynx_disable_irq(unsigned int irq)
}
static void
sable_lynx_mask_and_ack_irq(unsigned int irq)
sable_lynx_mask_and_ack_irq(struct irq_data *d)
{
unsigned long bit, mask;
bit = sable_lynx_irq_swizzle->irq_to_mask[irq];
bit = sable_lynx_irq_swizzle->irq_to_mask[d->irq];
spin_lock(&sable_lynx_irq_lock);
mask = sable_lynx_irq_swizzle->shadow_mask |= 1UL << bit;
sable_lynx_irq_swizzle->update_irq_hw(bit, mask);
......@@ -489,9 +489,9 @@ sable_lynx_mask_and_ack_irq(unsigned int irq)
static struct irq_chip sable_lynx_irq_type = {
.name = "SABLE/LYNX",
.unmask = sable_lynx_enable_irq,
.mask = sable_lynx_disable_irq,
.mask_ack = sable_lynx_mask_and_ack_irq,
.irq_unmask = sable_lynx_enable_irq,
.irq_mask = sable_lynx_disable_irq,
.irq_mask_ack = sable_lynx_mask_and_ack_irq,
};
static void
......@@ -518,9 +518,9 @@ sable_lynx_init_irq(int nr_of_irqs)
long i;
for (i = 0; i < nr_of_irqs; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &sable_lynx_irq_type,
handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
common_init_isa_dma();
......
arch/alpha/kernel/sys_takara.c
浏览文件 @ 8688a1a8
......@@ -45,16 +45,18 @@ takara_update_irq_hw(unsigned long irq, unsigned long mask)
}
static inline void
takara_enable_irq(unsigned int irq)
takara_enable_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] &= ~(1UL << (irq & 63)));
takara_update_irq_hw(irq, mask);
}
static void
takara_disable_irq(unsigned int irq)
takara_disable_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
unsigned long mask;
mask = (cached_irq_mask[irq >= 64] |= 1UL << (irq & 63));
takara_update_irq_hw(irq, mask);
......@@ -62,9 +64,9 @@ takara_disable_irq(unsigned int irq)
static struct irq_chip takara_irq_type = {
.name = "TAKARA",
.unmask = takara_enable_irq,
.mask = takara_disable_irq,
.mask_ack = takara_disable_irq,
.irq_unmask = takara_enable_irq,
.irq_mask = takara_disable_irq,
.irq_mask_ack = takara_disable_irq,
};
static void
......@@ -136,8 +138,8 @@ takara_init_irq(void)
takara_update_irq_hw(i, -1);
for (i = 16; i < 128; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, &takara_irq_type, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
common_init_isa_dma();
......
arch/alpha/kernel/sys_titan.c
浏览文件 @ 8688a1a8
......@@ -112,8 +112,9 @@ titan_update_irq_hw(unsigned long mask)
}
static inline void
titan_enable_irq(unsigned int irq)
titan_enable_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
spin_lock(&titan_irq_lock);
titan_cached_irq_mask |= 1UL << (irq - 16);
titan_update_irq_hw(titan_cached_irq_mask);
......@@ -121,8 +122,9 @@ titan_enable_irq(unsigned int irq)
}
static inline void
titan_disable_irq(unsigned int irq)
titan_disable_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
spin_lock(&titan_irq_lock);
titan_cached_irq_mask &= ~(1UL << (irq - 16));
titan_update_irq_hw(titan_cached_irq_mask);
......@@ -144,7 +146,8 @@ titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
}
static int
titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
titan_set_irq_affinity(struct irq_data *d, const struct cpumask *affinity,
bool force)
{
spin_lock(&titan_irq_lock);
titan_cpu_set_irq_affinity(irq - 16, *affinity);
......@@ -175,17 +178,17 @@ init_titan_irqs(struct irq_chip * ops, int imin, int imax)
{
long i;
for (i = imin; i <= imax; ++i) {
irq_to_desc(i)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i, ops, handle_level_irq);
irq_set_status_flags(i, IRQ_LEVEL);
}
}
static struct irq_chip titan_irq_type = {
.name = "TITAN",
.unmask = titan_enable_irq,
.mask = titan_disable_irq,
.mask_ack = titan_disable_irq,
.set_affinity = titan_set_irq_affinity,
.name = "TITAN",
.irq_unmask = titan_enable_irq,
.irq_mask = titan_disable_irq,
.irq_mask_ack = titan_disable_irq,
.irq_set_affinity = titan_set_irq_affinity,
};
static irqreturn_t
......
arch/alpha/kernel/sys_wildfire.c
浏览文件 @ 8688a1a8
......@@ -104,10 +104,12 @@ wildfire_init_irq_hw(void)
}
static void
wildfire_enable_irq(unsigned int irq)
wildfire_enable_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
if (irq < 16)
i8259a_enable_irq(irq);
i8259a_enable_irq(d);
spin_lock(&wildfire_irq_lock);
set_bit(irq, &cached_irq_mask);
......@@ -116,10 +118,12 @@ wildfire_enable_irq(unsigned int irq)
}
static void
wildfire_disable_irq(unsigned int irq)
wildfire_disable_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
if (irq < 16)
i8259a_disable_irq(irq);
i8259a_disable_irq(d);
spin_lock(&wildfire_irq_lock);
clear_bit(irq, &cached_irq_mask);
......@@ -128,10 +132,12 @@ wildfire_disable_irq(unsigned int irq)
}
static void
wildfire_mask_and_ack_irq(unsigned int irq)
wildfire_mask_and_ack_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
if (irq < 16)
i8259a_mask_and_ack_irq(irq);
i8259a_mask_and_ack_irq(d);
spin_lock(&wildfire_irq_lock);
clear_bit(irq, &cached_irq_mask);
......@@ -141,9 +147,9 @@ wildfire_mask_and_ack_irq(unsigned int irq)
static struct irq_chip wildfire_irq_type = {
.name = "WILDFIRE",
.unmask = wildfire_enable_irq,
.mask = wildfire_disable_irq,
.mask_ack = wildfire_mask_and_ack_irq,
.irq_unmask = wildfire_enable_irq,
.irq_mask = wildfire_disable_irq,
.irq_mask_ack = wildfire_mask_and_ack_irq,
};
static void __init
......@@ -177,21 +183,21 @@ wildfire_init_irq_per_pca(int qbbno, int pcano)
for (i = 0; i < 16; ++i) {
if (i == 2)
continue;
irq_to_desc(i+irq_bias)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i+irq_bias, &wildfire_irq_type,
handle_level_irq);
irq_set_status_flags(i + irq_bias, IRQ_LEVEL);
}
irq_to_desc(36+irq_bias)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(36+irq_bias, &wildfire_irq_type,
handle_level_irq);
irq_set_status_flags(36 + irq_bias, IRQ_LEVEL);
for (i = 40; i < 64; ++i) {
irq_to_desc(i+irq_bias)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(i+irq_bias, &wildfire_irq_type,
handle_level_irq);
irq_set_status_flags(i + irq_bias, IRQ_LEVEL);
}
setup_irq(32+irq_bias, &isa_enable);
setup_irq(32+irq_bias, &isa_enable);
}
static void __init
......
arch/arm/common/Kconfig
浏览文件 @ 8688a1a8
......@@ -6,6 +6,8 @@ config ARM_VIC
config ARM_VIC_NR
int
default 4 if ARCH_S5PV210
default 3 if ARCH_S5P6442 || ARCH_S5PC100
default 2
depends on ARM_VIC
help
......
arch/arm/include/asm/mach/arch.h
浏览文件 @ 8688a1a8
......@@ -15,10 +15,6 @@ struct meminfo;
struct sys_timer;
struct machine_desc {
/*
* Note! The first two elements are used
* by assembler code in head.S, head-common.S
*/
unsigned int nr; /* architecture number */
const char *name; /* architecture name */
unsigned long boot_params; /* tagged list */
......
arch/arm/include/asm/pgalloc.h
浏览文件 @ 8688a1a8
......@@ -10,6 +10,8 @@
#ifndef _ASMARM_PGALLOC_H
#define _ASMARM_PGALLOC_H
#include <linux/pagemap.h>
#include <asm/domain.h>
#include <asm/pgtable-hwdef.h>
#include <asm/processor.h>
......
arch/arm/kernel/hw_breakpoint.c
浏览文件 @ 8688a1a8
......@@ -836,9 +836,11 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
/*
* One-time initialisation.
*/
static void reset_ctrl_regs(void *unused)
static void reset_ctrl_regs(void *info)
{
int i;
int i, cpu = smp_processor_id();
u32 dbg_power;
cpumask_t *cpumask = info;
/*
* v7 debug contains save and restore registers so that debug state
......@@ -849,6 +851,17 @@ static void reset_ctrl_regs(void *unused)
* later on.
*/
if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
/*
* Ensure sticky power-down is clear (i.e. debug logic is
* powered up).
*/
asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power));
if ((dbg_power & 0x1) == 0) {
pr_warning("CPU %d debug is powered down!\n", cpu);
cpumask_or(cpumask, cpumask, cpumask_of(cpu));
return;
}
/*
* Unconditionally clear the lock by writing a value
* other than 0xC5ACCE55 to the access register.
......@@ -887,6 +900,7 @@ static struct notifier_block __cpuinitdata dbg_reset_nb = {
static int __init arch_hw_breakpoint_init(void)
{
u32 dscr;
cpumask_t cpumask = { CPU_BITS_NONE };
debug_arch = get_debug_arch();
......@@ -911,7 +925,13 @@ static int __init arch_hw_breakpoint_init(void)
* Reset the breakpoint resources. We assume that a halting
* debugger will leave the world in a nice state for us.
*/
on_each_cpu(reset_ctrl_regs, NULL, 1);
on_each_cpu(reset_ctrl_regs, &cpumask, 1);
if (!cpumask_empty(&cpumask)) {
core_num_brps = 0;
core_num_reserved_brps = 0;
core_num_wrps = 0;
return 0;
}
ARM_DBG_READ(c1, 0, dscr);
if (dscr & ARM_DSCR_HDBGEN) {
......
arch/arm/kernel/ptrace.c
浏览文件 @ 8688a1a8
......@@ -996,10 +996,10 @@ static int ptrace_gethbpregs(struct task_struct *tsk, long num,
while (!(arch_ctrl.len & 0x1))
arch_ctrl.len >>= 1;
if (idx & 0x1)
reg = encode_ctrl_reg(arch_ctrl);
else
if (num & 0x1)
reg = bp->attr.bp_addr;
else
reg = encode_ctrl_reg(arch_ctrl);
}
put:
......
arch/arm/mach-davinci/cpufreq.c
浏览文件 @ 8688a1a8
......@@ -132,7 +132,7 @@ static int davinci_target(struct cpufreq_policy *policy,
return ret;
}
static int __init davinci_cpu_init(struct cpufreq_policy *policy)
static int davinci_cpu_init(struct cpufreq_policy *policy)
{
int result = 0;
struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
......
arch/arm/mach-davinci/devices-da8xx.c
浏览文件 @ 8688a1a8
......@@ -480,8 +480,15 @@ static struct platform_device da850_mcasp_device = {
.resource = da850_mcasp_resources,
};
struct platform_device davinci_pcm_device = {
.name = "davinci-pcm-audio",
.id = -1,
};
void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
{
platform_device_register(&davinci_pcm_device);
/* DA830/OMAP-L137 has 3 instances of McASP */
if (cpu_is_davinci_da830() && id == 1) {
da830_mcasp1_device.dev.platform_data = pdata;
......
arch/arm/mach-davinci/gpio-tnetv107x.c
浏览文件 @ 8688a1a8
......@@ -58,7 +58,7 @@ static int tnetv107x_gpio_request(struct gpio_chip *chip, unsigned offset)
spin_lock_irqsave(&ctlr->lock, flags);
gpio_reg_set_bit(&regs->enable, gpio);
gpio_reg_set_bit(regs->enable, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
......@@ -74,7 +74,7 @@ static void tnetv107x_gpio_free(struct gpio_chip *chip, unsigned offset)
spin_lock_irqsave(&ctlr->lock, flags);
gpio_reg_clear_bit(&regs->enable, gpio);
gpio_reg_clear_bit(regs->enable, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
}
......@@ -88,7 +88,7 @@ static int tnetv107x_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
spin_lock_irqsave(&ctlr->lock, flags);
gpio_reg_set_bit(&regs->direction, gpio);
gpio_reg_set_bit(regs->direction, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
......@@ -106,11 +106,11 @@ static int tnetv107x_gpio_dir_out(struct gpio_chip *chip,
spin_lock_irqsave(&ctlr->lock, flags);
if (value)
gpio_reg_set_bit(&regs->data_out, gpio);
gpio_reg_set_bit(regs->data_out, gpio);
else
gpio_reg_clear_bit(&regs->data_out, gpio);
gpio_reg_clear_bit(regs->data_out, gpio);
gpio_reg_clear_bit(&regs->direction, gpio);
gpio_reg_clear_bit(regs->direction, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
......@@ -124,7 +124,7 @@ static int tnetv107x_gpio_get(struct gpio_chip *chip, unsigned offset)
unsigned gpio = chip->base + offset;
int ret;
ret = gpio_reg_get_bit(&regs->data_in, gpio);
ret = gpio_reg_get_bit(regs->data_in, gpio);
return ret ? 1 : 0;
}
......@@ -140,9 +140,9 @@ static void tnetv107x_gpio_set(struct gpio_chip *chip,
spin_lock_irqsave(&ctlr->lock, flags);
if (value)
gpio_reg_set_bit(&regs->data_out, gpio);
gpio_reg_set_bit(regs->data_out, gpio);
else
gpio_reg_clear_bit(&regs->data_out, gpio);
gpio_reg_clear_bit(regs->data_out, gpio);
spin_unlock_irqrestore(&ctlr->lock, flags);
}
......
arch/arm/mach-davinci/include/mach/clkdev.h
浏览文件 @ 8688a1a8
#ifndef __MACH_CLKDEV_H
#define __MACH_CLKDEV_H
struct clk;
static inline int __clk_get(struct clk *clk)
{
return 1;
......
arch/arm/mach-omap2/clkt_dpll.c
浏览文件 @ 8688a1a8
......@@ -77,7 +77,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
dd = clk->dpll_data;
/* DPLL divider must result in a valid jitter correction val */
fint = clk->parent->rate / (n + 1);
fint = clk->parent->rate / n;
if (fint < DPLL_FINT_BAND1_MIN) {
pr_debug("rejecting n=%d due to Fint failure, "
......
arch/arm/mach-omap2/mailbox.c
浏览文件 @ 8688a1a8
......@@ -193,10 +193,12 @@ static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = mbox->priv;
u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
l = mbox_read_reg(p->irqdisable);
l &= ~bit;
mbox_write_reg(l, p->irqdisable);
u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
if (!cpu_is_omap44xx())
bit = mbox_read_reg(p->irqdisable) & ~bit;
mbox_write_reg(bit, p->irqdisable);
}
static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
......@@ -334,7 +336,7 @@ static struct omap_mbox mbox_iva_info = {
.priv = &omap2_mbox_iva_priv,
};
struct omap_mbox *omap2_mboxes[] = { &mbox_iva_info, &mbox_dsp_info, NULL };
struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
#endif
#if defined(CONFIG_ARCH_OMAP4)
......
arch/arm/mach-omap2/mux.c
浏览文件 @ 8688a1a8
......@@ -605,7 +605,7 @@ static void __init omap_mux_dbg_create_entry(
list_for_each_entry(e, &partition->muxmodes, node) {
struct omap_mux *m = &e->mux;
(void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir,
(void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir,
m, &omap_mux_dbg_signal_fops);
}
}
......
arch/arm/mach-omap2/pm-debug.c
浏览文件 @ 8688a1a8
......@@ -637,14 +637,14 @@ static int __init pm_dbg_init(void)
}
(void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUGO, d,
(void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUSR, d,
&enable_off_mode, &pm_dbg_option_fops);
(void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUGO, d,
(void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d,
&sleep_while_idle, &pm_dbg_option_fops);
(void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d,
(void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d,
&wakeup_timer_seconds, &pm_dbg_option_fops);
(void) debugfs_create_file("wakeup_timer_milliseconds",
S_IRUGO | S_IWUGO, d, &wakeup_timer_milliseconds,
S_IRUGO | S_IWUSR, d, &wakeup_timer_milliseconds,
&pm_dbg_option_fops);
pm_dbg_init_done = 1;
......
arch/arm/mach-omap2/prcm_mpu44xx.h
浏览文件 @ 8688a1a8
......@@ -38,8 +38,8 @@
#define OMAP4430_PRCM_MPU_CPU1_INST 0x0800
/* PRCM_MPU clockdomain register offsets (from instance start) */
#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS 0x0000
#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS 0x0000
#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS 0x0018
#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS 0x0018
/*
......
arch/arm/mach-omap2/smartreflex.c
浏览文件 @ 8688a1a8
......@@ -282,6 +282,7 @@ static int sr_late_init(struct omap_sr *sr_info)
dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
"interrupt handler. Smartreflex will"
"not function as desired\n", __func__);
kfree(name);
kfree(sr_info);
return ret;
}
......@@ -879,7 +880,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
ret = sr_late_init(sr_info);
if (ret) {
pr_warning("%s: Error in SR late init\n", __func__);
return ret;
goto err_release_region;
}
}
......@@ -890,17 +891,20 @@ static int __init omap_sr_probe(struct platform_device *pdev)
* not try to create rest of the debugfs entries.
*/
vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm);
if (!vdd_dbg_dir)
return -EINVAL;
if (!vdd_dbg_dir) {
ret = -EINVAL;
goto err_release_region;
}
dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir);
if (IS_ERR(dbg_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
__func__);
return PTR_ERR(dbg_dir);
ret = PTR_ERR(dbg_dir);
goto err_release_region;
}
(void) debugfs_create_file("autocomp", S_IRUGO | S_IWUGO, dbg_dir,
(void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, dbg_dir,
(void *)sr_info, &pm_sr_fops);
(void) debugfs_create_x32("errweight", S_IRUGO, dbg_dir,
&sr_info->err_weight);
......@@ -913,7 +917,8 @@ static int __init omap_sr_probe(struct platform_device *pdev)
if (IS_ERR(nvalue_dir)) {
dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
"for n-values\n", __func__);
return PTR_ERR(nvalue_dir);
ret = PTR_ERR(nvalue_dir);
goto err_release_region;
}
omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
......@@ -922,24 +927,16 @@ static int __init omap_sr_probe(struct platform_device *pdev)
" corresponding vdd vdd_%s. Cannot create debugfs"
"entries for n-values\n",
__func__, sr_info->voltdm->name);
return -ENODATA;
ret = -ENODATA;
goto err_release_region;
}
for (i = 0; i < sr_info->nvalue_count; i++) {
char *name;
char volt_name[32];
name = kzalloc(NVALUE_NAME_LEN + 1, GFP_KERNEL);
if (!name) {
dev_err(&pdev->dev, "%s: Unable to allocate memory"
" for n-value directory name\n", __func__);
return -ENOMEM;
}
char name[NVALUE_NAME_LEN + 1];
strcpy(name, "volt_");
sprintf(volt_name, "%d", volt_data[i].volt_nominal);
strcat(name, volt_name);
(void) debugfs_create_x32(name, S_IRUGO | S_IWUGO, nvalue_dir,
snprintf(name, sizeof(name), "volt_%d",
volt_data[i].volt_nominal);
(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
&(sr_info->nvalue_table[i].nvalue));
}
......
arch/arm/mach-omap2/timer-gp.c
浏览文件 @ 8688a1a8
......@@ -39,6 +39,7 @@
#include <asm/mach/time.h>
#include <plat/dmtimer.h>
#include <asm/localtimer.h>
#include <asm/sched_clock.h>
#include "timer-gp.h"
......@@ -190,6 +191,7 @@ static void __init omap2_gp_clocksource_init(void)
/*
* clocksource
*/
static DEFINE_CLOCK_DATA(cd);
static struct omap_dm_timer *gpt_clocksource;
static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
......@@ -204,6 +206,15 @@ static struct clocksource clocksource_gpt = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static void notrace dmtimer_update_sched_clock(void)
{
u32 cyc;
cyc = omap_dm_timer_read_counter(gpt_clocksource);
update_sched_clock(&cd, cyc, (u32)~0);
}
/* Setup free-running counter for clocksource */
static void __init omap2_gp_clocksource_init(void)
{
......@@ -224,6 +235,8 @@ static void __init omap2_gp_clocksource_init(void)
omap_dm_timer_set_load_start(gpt, 1, 0);
init_sched_clock(&cd, dmtimer_update_sched_clock, 32, tick_rate);
if (clocksource_register_hz(&clocksource_gpt, tick_rate))
printk(err2, clocksource_gpt.name);
}
......
arch/arm/mach-pxa/pxa25x.c
浏览文件 @ 8688a1a8
......@@ -347,6 +347,7 @@ static struct platform_device *pxa25x_devices[] __initdata = {
&pxa25x_device_assp,
&pxa25x_device_pwm0,
&pxa25x_device_pwm1,
&pxa_device_asoc_platform,
};
static struct sys_device pxa25x_sysdev[] = {
......
arch/arm/mach-pxa/tosa-bt.c
浏览文件 @ 8688a1a8
......@@ -81,8 +81,6 @@ static int tosa_bt_probe(struct platform_device *dev)
goto err_rfk_alloc;
}
rfkill_set_led_trigger_name(rfk, "tosa-bt");
rc = rfkill_register(rfk);
if (rc)
goto err_rfkill;
......
arch/arm/mach-pxa/tosa.c
浏览文件 @ 8688a1a8
......@@ -875,6 +875,11 @@ static struct platform_device sharpsl_rom_device = {
.dev.platform_data = &sharpsl_rom_data,
};
static struct platform_device wm9712_device = {
.name = "wm9712-codec",
.id = -1,
};
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
......@@ -885,6 +890,7 @@ static struct platform_device *devices[] __initdata = {
&tosaled_device,
&tosa_bt_device,
&sharpsl_rom_device,
&wm9712_device,
};
static void tosa_poweroff(void)
......
arch/arm/mach-s3c2440/Kconfig
浏览文件 @ 8688a1a8
......@@ -99,6 +99,7 @@ config MACH_NEO1973_GTA02
select POWER_SUPPLY
select MACH_NEO1973
select S3C2410_PWM
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
......
arch/arm/mach-s3c2440/include/mach/gta02.h
浏览文件 @ 8688a1a8
......@@ -44,19 +44,19 @@
#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */
#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */
#define GTA02_GPIO_AMP_SHUT S3C2440_GPJ1 /* v2 + v3 + v4 only */
#define GTA02v1_GPIO_WLAN_GPIO10 S3C2440_GPJ2
#define GTA02_GPIO_HP_IN S3C2440_GPJ2 /* v2 + v3 + v4 only */
#define GTA02_GPIO_INT0 S3C2440_GPJ3 /* v2 + v3 + v4 only */
#define GTA02_GPIO_nGSM_EN S3C2440_GPJ4
#define GTA02_GPIO_3D_RESET S3C2440_GPJ5
#define GTA02_GPIO_nDL_GSM S3C2440_GPJ6 /* v4 + v5 only */
#define GTA02_GPIO_WLAN_GPIO0 S3C2440_GPJ7
#define GTA02v1_GPIO_BAT_ID S3C2440_GPJ8
#define GTA02_GPIO_KEEPACT S3C2440_GPJ8
#define GTA02v1_GPIO_HP_IN S3C2440_GPJ10
#define GTA02_CHIP_PWD S3C2440_GPJ11 /* v2 + v3 + v4 only */
#define GTA02_GPIO_nWLAN_RESET S3C2440_GPJ12 /* v2 + v3 + v4 only */
#define GTA02_GPIO_AMP_SHUT S3C2410_GPJ(1) /* v2 + v3 + v4 only */
#define GTA02v1_GPIO_WLAN_GPIO10 S3C2410_GPJ(2)
#define GTA02_GPIO_HP_IN S3C2410_GPJ(2) /* v2 + v3 + v4 only */
#define GTA02_GPIO_INT0 S3C2410_GPJ(3) /* v2 + v3 + v4 only */
#define GTA02_GPIO_nGSM_EN S3C2410_GPJ(4)
#define GTA02_GPIO_3D_RESET S3C2410_GPJ(5)
#define GTA02_GPIO_nDL_GSM S3C2410_GPJ(6) /* v4 + v5 only */
#define GTA02_GPIO_WLAN_GPIO0 S3C2410_GPJ(7)
#define GTA02v1_GPIO_BAT_ID S3C2410_GPJ(8)
#define GTA02_GPIO_KEEPACT S3C2410_GPJ(8)
#define GTA02v1_GPIO_HP_IN S3C2410_GPJ(10)
#define GTA02_CHIP_PWD S3C2410_GPJ(11) /* v2 + v3 + v4 only */
#define GTA02_GPIO_nWLAN_RESET S3C2410_GPJ(12) /* v2 + v3 + v4 only */
#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0
#define GTA02_IRQ_MODEM IRQ_EINT1
......
arch/arm/mach-s3c64xx/clock.c
浏览文件 @ 8688a1a8
......@@ -150,6 +150,12 @@ static struct clk init_clocks_off[] = {
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_IIC,
}, {
.name = "i2c",
.id = 1,
.parent = &clk_p,
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C6410_CLKCON_PCLK_I2C1,
}, {
.name = "iis",
.id = 0,
......
arch/arm/mach-s3c64xx/dma.c
浏览文件 @ 8688a1a8
......@@ -690,12 +690,12 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
regptr = regs + PL080_Cx_BASE(0);
for (ch = 0; ch < 8; ch++, chno++, chptr++) {
printk(KERN_INFO "%s: registering DMA %d (%p)\n",
__func__, chno, regptr);
for (ch = 0; ch < 8; ch++, chptr++) {
pr_debug("%s: registering DMA %d (%p)\n",
__func__, chno + ch, regptr);
chptr->bit = 1 << ch;
chptr->number = chno;
chptr->number = chno + ch;
chptr->dmac = dmac;
chptr->regs = regptr;
regptr += PL080_Cx_STRIDE;
......@@ -704,7 +704,8 @@ static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
/* for the moment, permanently enable the controller */
writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
printk(KERN_INFO "PL080: IRQ %d, at %p, channels %d..%d\n",
irq, regs, chno, chno+8);
return 0;
......
arch/arm/mach-s3c64xx/gpiolib.c
浏览文件 @ 8688a1a8
......@@ -72,7 +72,7 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
.get_pull = s3c_gpio_getpull_updown,
};
int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
{
return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
}
......@@ -138,7 +138,7 @@ static struct s3c_gpio_chip gpio_4bit[] = {
},
};
int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
{
return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
}
......
arch/arm/mach-s3c64xx/mach-smdk6410.c
浏览文件 @ 8688a1a8
......@@ -28,6 +28,7 @@
#include <linux/delay.h>
#include <linux/smsc911x.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#ifdef CONFIG_SMDK6410_WM1190_EV1
#include <linux/mfd/wm8350/core.h>
......@@ -351,7 +352,7 @@ static struct regulator_init_data smdk6410_vddpll = {
/* VDD_UH_MMC, LDO5 on J5 */
static struct regulator_init_data smdk6410_vdduh_mmc = {
.constraints = {
.name = "PVDD_UH/PVDD_MMC",
.name = "PVDD_UH+PVDD_MMC",
.always_on = 1,
},
};
......@@ -417,7 +418,7 @@ static struct regulator_init_data smdk6410_vddaudio = {
/* S3C64xx internal logic & PLL */
static struct regulator_init_data wm8350_dcdc1_data = {
.constraints = {
.name = "PVDD_INT/PVDD_PLL",
.name = "PVDD_INT+PVDD_PLL",
.min_uV = 1200000,
.max_uV = 1200000,
.always_on = 1,
......@@ -452,7 +453,7 @@ static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
static struct regulator_init_data wm8350_dcdc4_data = {
.constraints = {
.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
.name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
.min_uV = 3000000,
.max_uV = 3000000,
.always_on = 1,
......@@ -464,7 +465,7 @@ static struct regulator_init_data wm8350_dcdc4_data = {
/* OTGi/1190-EV1 HPVDD & AVDD */
static struct regulator_init_data wm8350_ldo4_data = {
.constraints = {
.name = "PVDD_OTGI/HPVDD/AVDD",
.name = "PVDD_OTGI+HPVDD+AVDD",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
......@@ -552,7 +553,7 @@ static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
static struct regulator_init_data wm1192_dcdc3 = {
.constraints = {
.name = "PVDD_MEM/PVDD_GPS",
.name = "PVDD_MEM+PVDD_GPS",
.always_on = 1,
},
};
......@@ -563,7 +564,7 @@ static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
static struct regulator_init_data wm1192_ldo1 = {
.constraints = {
.name = "PVDD_LCD/PVDD_EXT",
.name = "PVDD_LCD+PVDD_EXT",
.always_on = 1,
},
.consumer_supplies = wm1192_ldo1_consumers,
......
arch/arm/mach-s3c64xx/setup-keypad.c
浏览文件 @ 8688a1a8
......@@ -17,7 +17,7 @@
void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
{
/* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), 8 + rows, S3C_GPIO_SFN(3));
s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), rows, S3C_GPIO_SFN(3));
/* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
s3c_gpio_cfgrange_nopull(S3C64XX_GPL(0), cols, S3C_GPIO_SFN(3));
......
arch/arm/mach-s3c64xx/setup-sdhci.c
浏览文件 @ 8688a1a8
......@@ -56,7 +56,7 @@ void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
else
ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
writel(ctrl2, r + S3C_SDHCI_CONTROL2);
writel(ctrl3, r + S3C_SDHCI_CONTROL3);
}
......
arch/arm/mach-s5p64x0/include/mach/gpio.h
浏览文件 @ 8688a1a8
......@@ -23,7 +23,7 @@
#define S5P6440_GPIO_A_NR (6)
#define S5P6440_GPIO_B_NR (7)
#define S5P6440_GPIO_C_NR (8)
#define S5P6440_GPIO_F_NR (2)
#define S5P6440_GPIO_F_NR (16)
#define S5P6440_GPIO_G_NR (7)
#define S5P6440_GPIO_H_NR (10)
#define S5P6440_GPIO_I_NR (16)
......@@ -36,7 +36,7 @@
#define S5P6450_GPIO_B_NR (7)
#define S5P6450_GPIO_C_NR (8)
#define S5P6450_GPIO_D_NR (8)
#define S5P6450_GPIO_F_NR (2)
#define S5P6450_GPIO_F_NR (16)
#define S5P6450_GPIO_G_NR (14)
#define S5P6450_GPIO_H_NR (10)
#define S5P6450_GPIO_I_NR (16)
......
arch/arm/mach-shmobile/board-ag5evm.c
浏览文件 @ 8688a1a8
......@@ -454,6 +454,7 @@ static void __init ag5evm_init(void)
gpio_direction_output(GPIO_PORT217, 0);
mdelay(1);
gpio_set_value(GPIO_PORT217, 1);
mdelay(100);
/* LCD backlight controller */
gpio_request(GPIO_PORT235, NULL); /* RESET */
......
arch/arm/mach-shmobile/board-ap4evb.c
浏览文件 @ 8688a1a8
......@@ -1303,7 +1303,7 @@ static void __init ap4evb_init(void)
lcdc_info.clock_source = LCDC_CLK_BUS;
lcdc_info.ch[0].interface_type = RGB18;
lcdc_info.ch[0].clock_divider = 2;
lcdc_info.ch[0].clock_divider = 3;
lcdc_info.ch[0].flags = 0;
lcdc_info.ch[0].lcd_size_cfg.width = 152;
lcdc_info.ch[0].lcd_size_cfg.height = 91;
......
arch/arm/mach-shmobile/board-mackerel.c
浏览文件 @ 8688a1a8
......@@ -303,7 +303,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
.lcd_cfg = mackerel_lcdc_modes,
.num_cfg = ARRAY_SIZE(mackerel_lcdc_modes),
.interface_type = RGB24,
.clock_divider = 2,
.clock_divider = 3,
.flags = 0,
.lcd_size_cfg.width = 152,
.lcd_size_cfg.height = 91,
......
arch/arm/mach-shmobile/clock-sh73a0.c
浏览文件 @ 8688a1a8
......@@ -263,7 +263,7 @@ static struct clk div6_clks[DIV6_NR] = {
};
enum { MSTP001,
MSTP125, MSTP118, MSTP116, MSTP100,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
MSTP219,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
MSTP331, MSTP329, MSTP325, MSTP323, MSTP312,
......@@ -275,6 +275,10 @@ enum { MSTP001,
static struct clk mstp_clks[MSTP_NR] = {
[MSTP001] = MSTP(&div4_clks[DIV4_HP], SMSTPCR0, 1, 0), /* IIC2 */
[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* CEU1 */
[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* CSI2-RX1 */
[MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU0 */
[MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2-RX0 */
[MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX0 */
[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
......@@ -306,6 +310,9 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("r_clk", &r_clk),
/* DIV6 clocks */
CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]),
CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
......@@ -313,11 +320,15 @@ static struct clk_lookup lookups[] = {
/* MSTP32 clocks */
CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP129]), /* CEU1 */
CLKDEV_DEV_ID("sh-mobile-csi2.1", &mstp_clks[MSTP128]), /* CSI2-RX1 */
CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU0 */
CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2-RX0 */
CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */
CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
......
arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
浏览文件 @ 8688a1a8
......@@ -6,13 +6,10 @@ LIST "RWT Setting"
EW 0xE6020004, 0xA500
EW 0xE6030004, 0xA500
DD 0x01001000, 0x01001000
LIST "GPIO Setting"
EB 0xE6051013, 0xA2
LIST "CPG"
ED 0xE6150080, 0x00000180
ED 0xE61500C0, 0x00000002
WAIT 1, 0xFE40009C
......@@ -37,6 +34,9 @@ ED 0xE615002C, 0x93000040
WAIT 1, 0xFE40009C
LIST "SUB/USBClk"
ED 0xE6150080, 0x00000180
LIST "BSC"
ED 0xFEC10000, 0x00E0001B
......@@ -53,7 +53,7 @@ ED 0xFE400048, 0x20C18505
ED 0xFE40004C, 0x00110209
ED 0xFE400010, 0x00000087
WAIT 10, 0xFE40009C
WAIT 30, 0xFE40009C
ED 0xFE400084, 0x0000003F
EB 0xFE500000, 0x00
......@@ -84,7 +84,7 @@ ED 0xE6150004, 0x80331050
WAIT 1, 0xFE40009C
ED 0xE6150354, 0x00000002
ED 0xFE400354, 0x01AD8002
LIST "SCIF0 - Serial port for earlyprintk"
EB 0xE6053098, 0x11
......
arch/arm/mach-shmobile/include/mach/head-mackerel.txt
浏览文件 @ 8688a1a8
......@@ -6,13 +6,10 @@ LIST "RWT Setting"
EW 0xE6020004, 0xA500
EW 0xE6030004, 0xA500
DD 0x01001000, 0x01001000
LIST "GPIO Setting"
EB 0xE6051013, 0xA2
LIST "CPG"
ED 0xE6150080, 0x00000180
ED 0xE61500C0, 0x00000002
WAIT 1, 0xFE40009C
......@@ -37,6 +34,9 @@ ED 0xE615002C, 0x93000040
WAIT 1, 0xFE40009C
LIST "SUB/USBClk"
ED 0xE6150080, 0x00000180
LIST "BSC"
ED 0xFEC10000, 0x00E0001B
......@@ -53,7 +53,7 @@ ED 0xFE400048, 0x20C18505
ED 0xFE40004C, 0x00110209
ED 0xFE400010, 0x00000087
WAIT 10, 0xFE40009C
WAIT 30, 0xFE40009C
ED 0xFE400084, 0x0000003F
EB 0xFE500000, 0x00
......@@ -84,7 +84,7 @@ ED 0xE6150004, 0x80331050
WAIT 1, 0xFE40009C
ED 0xE6150354, 0x00000002
ED 0xFE400354, 0x01AD8002
LIST "SCIF0 - Serial port for earlyprintk"
EB 0xE6053098, 0x11
......
arch/arm/mach-tcc8k/board-tcc8000-sdk.c
浏览文件 @ 8688a1a8
......@@ -6,6 +6,7 @@
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
......@@ -17,6 +18,8 @@
#include <asm/mach/time.h>
#include <mach/clock.h>
#include <mach/tcc-nand.h>
#include <mach/tcc8k-regs.h>
#include "common.h"
......@@ -51,6 +54,22 @@ static struct sys_timer tcc8k_timer = {
static void __init tcc8k_map_io(void)
{
tcc8k_map_common_io();
/* set PLL0 clock to 96MHz, adapt UART0 divisor */
__raw_writel(0x00026003, CKC_BASE + PLL0CFG_OFFS);
__raw_writel(0x10000001, CKC_BASE + ACLKUART0_OFFS);
/* set PLL1 clock to 192MHz */
__raw_writel(0x00016003, CKC_BASE + PLL1CFG_OFFS);
/* set PLL2 clock to 48MHz */
__raw_writel(0x00036003, CKC_BASE + PLL2CFG_OFFS);
/* with CPU freq higher than 150 MHz, need extra DTCM wait */
__raw_writel(0x00000001, SCFG_BASE + DTCMWAIT_OFFS);
/* PLL locking time as specified */
udelay(300);
}
MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
......
arch/arm/mach-tcc8k/clock.c
浏览文件 @ 8688a1a8
......@@ -45,11 +45,12 @@
#define ACLKGSB1 (CKC_BASE + ACLKGSB1_OFFS)
#define ACLKGSB2 (CKC_BASE + ACLKGSB2_OFFS)
#define ACLKGSB3 (CKC_BASE + ACLKGSB3_OFFS)
#define ACLKUSBH (CKC_BASE + ACLKUSBH_OFFS)
#define ACLKTCT (CKC_BASE + ACLKTCT_OFFS)
#define ACLKTCX (CKC_BASE + ACLKTCX_OFFS)
#define ACLKTCZ (CKC_BASE + ACLKTCZ_OFFS)
#define ACLK_MAX_DIV (0xfff + 1)
/* Crystal frequencies */
static unsigned long xi_rate, xti_rate;
......@@ -106,9 +107,9 @@ static int root_clk_enable(enum root_clks src)
return 0;
}
static int root_clk_disable(enum root_clks root_src)
static int root_clk_disable(enum root_clks src)
{
switch (root_src) {
switch (src) {
case CLK_SRC_PLL0: return pll_enable(0, 0);
case CLK_SRC_PLL1: return pll_enable(1, 0);
case CLK_SRC_PLL2: return pll_enable(2, 0);
......@@ -197,7 +198,7 @@ static unsigned long get_rate_pll_div(int pll)
addr = CKC_BASE + CLKDIVC1_OFFS;
reg = __raw_readl(addr);
if (reg & CLKDIVC1_P2E)
div = __raw_readl(addr) & 0x3f;
div = reg & 0x3f;
break;
}
return get_rate_pll(pll) / (div + 1);
......@@ -258,14 +259,19 @@ static unsigned long aclk_best_div(struct clk *clk, unsigned long rate)
{
unsigned long div, src, freq, r1, r2;
if (!rate)
return ACLK_MAX_DIV;
src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
src &= CLK_SRC_MASK;
freq = root_clk_get_rate(src);
div = freq / rate + 1;
div = freq / rate;
if (!div)
return 1;
if (div >= ACLK_MAX_DIV)
return ACLK_MAX_DIV;
r1 = freq / div;
r2 = freq / (div + 1);
if (r2 >= rate)
return div + 1;
if ((rate - r2) < (r1 - rate))
return div + 1;
......@@ -287,7 +293,8 @@ static int aclk_set_rate(struct clk *clk, unsigned long rate)
u32 reg;
reg = __raw_readl(clk->aclkreg) & ~ACLK_DIV_MASK;
reg |= aclk_best_div(clk, rate);
reg |= aclk_best_div(clk, rate) - 1;
__raw_writel(reg, clk->aclkreg);
return 0;
}
......@@ -296,15 +303,22 @@ static unsigned long get_rate_sys(struct clk *clk)
unsigned int src;
src = __raw_readl(CKC_BASE + CLKCTRL_OFFS) & CLK_SRC_MASK;
return root_clk_get_rate(src);
return root_clk_get_rate(src);
}
static unsigned long get_rate_bus(struct clk *clk)
{
unsigned int div;
unsigned int reg, sdiv, bdiv, rate;
div = (__raw_readl(CKC_BASE + CLKCTRL_OFFS) >> 4) & 0xff;
return get_rate_sys(clk) / (div + 1);
reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
rate = get_rate_sys(clk);
sdiv = (reg >> 20) & 3;
if (sdiv)
rate /= sdiv + 1;
bdiv = (reg >> 4) & 0xff;
if (bdiv)
rate /= bdiv + 1;
return rate;
}
static unsigned long get_rate_cpu(struct clk *clk)
......
arch/arm/mach-tegra/include/mach/kbc.h
浏览文件 @ 8688a1a8
......@@ -57,5 +57,6 @@ struct tegra_kbc_platform_data {
const struct matrix_keymap_data *keymap_data;
bool wakeup;
bool use_fn_map;
};
#endif
arch/arm/plat-omap/mailbox.c
浏览文件 @ 8688a1a8
......@@ -322,15 +322,18 @@ static void omap_mbox_fini(struct omap_mbox *mbox)
struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb)
{
struct omap_mbox *mbox;
int ret;
struct omap_mbox *_mbox, *mbox = NULL;
int i, ret;
if (!mboxes)
return ERR_PTR(-EINVAL);
for (mbox = *mboxes; mbox; mbox++)
if (!strcmp(mbox->name, name))
for (i = 0; (_mbox = mboxes[i]); i++) {
if (!strcmp(_mbox->name, name)) {
mbox = _mbox;
break;
}
}
if (!mbox)
return ERR_PTR(-ENOENT);
......
arch/arm/plat-samsung/dev-uart.c
浏览文件 @ 8688a1a8
......@@ -15,6 +15,8 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <plat/devs.h>
/* uart devices */
static struct platform_device s3c24xx_uart_device0 = {
......
arch/blackfin/lib/outs.S
浏览文件 @ 8688a1a8
......@@ -13,6 +13,8 @@
.align 2
ENTRY(_outsl)
CC = R2 == 0;
IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
......@@ -20,10 +22,12 @@ ENTRY(_outsl)
LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
.Llong_loop_s: R0 = [P1++];
.Llong_loop_e: [P0] = R0;
RTS;
1: RTS;
ENDPROC(_outsl)
ENTRY(_outsw)
CC = R2 == 0;
IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
......@@ -31,10 +35,12 @@ ENTRY(_outsw)
LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
.Lword_loop_s: R0 = W[P1++];
.Lword_loop_e: W[P0] = R0;
RTS;
1: RTS;
ENDPROC(_outsw)
ENTRY(_outsb)
CC = R2 == 0;
IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
......@@ -42,10 +48,12 @@ ENTRY(_outsb)
LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
.Lbyte_loop_s: R0 = B[P1++];
.Lbyte_loop_e: B[P0] = R0;
RTS;
1: RTS;
ENDPROC(_outsb)
ENTRY(_outsw_8)
CC = R2 == 0;
IF CC JUMP 1f;
P0 = R0; /* P0 = port */
P1 = R1; /* P1 = address */
P2 = R2; /* P2 = count */
......@@ -56,5 +64,5 @@ ENTRY(_outsw_8)
R0 = R0 << 8;
R0 = R0 + R1;
.Lword8_loop_e: W[P0] = R0;
RTS;
1: RTS;
ENDPROC(_outsw_8)
arch/blackfin/mach-common/cache.S
浏览文件 @ 8688a1a8
......@@ -58,6 +58,8 @@
1:
.ifeqs "\flushins", BROK_FLUSH_INST
\flushins [P0++];
nop;
nop;
2: nop;
.else
2: \flushins [P0++];
......
arch/cris/kernel/vmlinux.lds.S
浏览文件 @ 8688a1a8
......@@ -72,11 +72,6 @@ SECTIONS
INIT_TEXT_SECTION(PAGE_SIZE)
.init.data : { INIT_DATA }
.init.setup : { INIT_SETUP(16) }
#ifdef CONFIG_ETRAX_ARCH_V32
__start___param = .;
__param : { *(__param) }
__stop___param = .;
#endif
.initcall.init : {
INIT_CALLS
}
......
arch/powerpc/include/asm/machdep.h
浏览文件 @ 8688a1a8
......@@ -240,6 +240,12 @@ struct machdep_calls {
* claims to support kexec.
*/
int (*machine_kexec_prepare)(struct kimage *image);
/* Called to perform the _real_ kexec.
* Do NOT allocate memory or fail here. We are past the point of
* no return.
*/
void (*machine_kexec)(struct kimage *image);
#endif /* CONFIG_KEXEC */
#ifdef CONFIG_SUSPEND
......
arch/powerpc/kernel/machine_kexec.c
浏览文件 @ 8688a1a8
......@@ -87,7 +87,10 @@ void machine_kexec(struct kimage *image)
save_ftrace_enabled = __ftrace_enabled_save();
default_machine_kexec(image);
if (ppc_md.machine_kexec)
ppc_md.machine_kexec(image);
else
default_machine_kexec(image);
__ftrace_enabled_restore(save_ftrace_enabled);
......
arch/powerpc/kernel/process.c
浏览文件 @ 8688a1a8
......@@ -353,6 +353,7 @@ static void switch_booke_debug_regs(struct thread_struct *new_thread)
prime_debug_regs(new_thread);
}
#else /* !CONFIG_PPC_ADV_DEBUG_REGS */
#ifndef CONFIG_HAVE_HW_BREAKPOINT
static void set_debug_reg_defaults(struct thread_struct *thread)
{
if (thread->dabr) {
......@@ -360,6 +361,7 @@ static void set_debug_reg_defaults(struct thread_struct *thread)
set_dabr(0);
}
}
#endif /* !CONFIG_HAVE_HW_BREAKPOINT */
#endif /* CONFIG_PPC_ADV_DEBUG_REGS */
int set_dabr(unsigned long dabr)
......@@ -670,11 +672,11 @@ void flush_thread(void)
{
discard_lazy_cpu_state();
#ifdef CONFIG_HAVE_HW_BREAKPOINTS
#ifdef CONFIG_HAVE_HW_BREAKPOINT
flush_ptrace_hw_breakpoint(current);
#else /* CONFIG_HAVE_HW_BREAKPOINTS */
#else /* CONFIG_HAVE_HW_BREAKPOINT */
set_debug_reg_defaults(&current->thread);
#endif /* CONFIG_HAVE_HW_BREAKPOINTS */
#endif /* CONFIG_HAVE_HW_BREAKPOINT */
}
void
......
arch/powerpc/mm/tlb_hash64.c
浏览文件 @ 8688a1a8
......@@ -38,13 +38,11 @@ DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
* neesd to be flushed. This function will either perform the flush
* immediately or will batch it up if the current CPU has an active
* batch on it.
*
* Must be called from within some kind of spinlock/non-preempt region...
*/
void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, unsigned long pte, int huge)
{
struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
struct ppc64_tlb_batch *batch = &get_cpu_var(ppc64_tlb_batch);
unsigned long vsid, vaddr;
unsigned int psize;
int ssize;
......@@ -99,6 +97,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
*/
if (!batch->active) {
flush_hash_page(vaddr, rpte, psize, ssize, 0);
put_cpu_var(ppc64_tlb_batch);
return;
}
......@@ -127,6 +126,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
batch->index = ++i;
if (i >= PPC64_TLB_BATCH_NR)
__flush_tlb_pending(batch);
put_cpu_var(ppc64_tlb_batch);
}
/*
......
arch/sh/include/asm/sections.h
浏览文件 @ 8688a1a8
......@@ -3,7 +3,7 @@
#include <asm-generic/sections.h>
extern void __nosave_begin, __nosave_end;
extern long __nosave_begin, __nosave_end;
extern long __machvec_start, __machvec_end;
extern char __uncached_start, __uncached_end;
extern char _ebss[];
......
arch/sh/kernel/cpu/sh4/setup-sh7750.c
浏览文件 @ 8688a1a8
......@@ -14,7 +14,7 @@
#include <linux/io.h>
#include <linux/sh_timer.h>
#include <linux/serial_sci.h>
#include <asm/machtypes.h>
#include <generated/machtypes.h>
static struct resource rtc_resources[] = {
[0] = {
......@@ -255,12 +255,17 @@ static struct platform_device *sh7750_early_devices[] __initdata = {
void __init plat_early_device_setup(void)
{
struct platform_device *dev[1];
if (mach_is_rts7751r2d()) {
scif_platform_data.scscr |= SCSCR_CKE1;
early_platform_add_devices(&scif_device, 1);
dev[0] = &scif_device;
early_platform_add_devices(dev, 1);
} else {
early_platform_add_devices(&sci_device, 1);
early_platform_add_devices(&scif_device, 1);
dev[0] = &sci_device;
early_platform_add_devices(dev, 1);
dev[0] = &scif_device;
early_platform_add_devices(dev, 1);
}
early_platform_add_devices(sh7750_early_devices,
......
arch/sh/lib/delay.c
浏览文件 @ 8688a1a8
......@@ -10,6 +10,16 @@
void __delay(unsigned long loops)
{
__asm__ __volatile__(
/*
* ST40-300 appears to have an issue with this code,
* normally taking two cycles each loop, as with all
* other SH variants. If however the branch and the
* delay slot straddle an 8 byte boundary, this increases
* to 3 cycles.
* This align directive ensures this doesn't occur.
*/
".balign 8\n\t"
"tst %0, %0\n\t"
"1:\t"
"bf/s 1b\n\t"
......
arch/sh/mm/cache.c
浏览文件 @ 8688a1a8
......@@ -108,7 +108,8 @@ void copy_user_highpage(struct page *to, struct page *from,
kunmap_atomic(vfrom, KM_USER0);
}
if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
if (pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK) ||
(vma->vm_flags & VM_EXEC))
__flush_purge_region(vto, PAGE_SIZE);
kunmap_atomic(vto, KM_USER1);
......
arch/x86/include/asm/acpi.h
浏览文件 @ 8688a1a8
......@@ -88,6 +88,7 @@ extern int acpi_disabled;
extern int acpi_pci_disabled;
extern int acpi_skip_timer_override;
extern int acpi_use_timer_override;
extern int acpi_fix_pin2_polarity;
extern u8 acpi_sci_flags;
extern int acpi_sci_override_gsi;
......
arch/x86/include/asm/msr-index.h
浏览文件 @ 8688a1a8
......@@ -36,6 +36,11 @@
#define MSR_IA32_PERFCTR1 0x000000c2
#define MSR_FSB_FREQ 0x000000cd
#define MSR_NHM_SNB_PKG_CST_CFG_CTL 0x000000e2
#define NHM_C3_AUTO_DEMOTE (1UL << 25)
#define NHM_C1_AUTO_DEMOTE (1UL << 26)
#define ATM_LNC_C6_AUTO_DEMOTE (1UL << 25)
#define MSR_MTRRcap 0x000000fe
#define MSR_IA32_BBL_CR_CTL 0x00000119
......
arch/x86/include/asm/perf_event_p4.h
浏览文件 @ 8688a1a8
......@@ -22,6 +22,7 @@
#define ARCH_P4_CNTRVAL_BITS (40)
#define ARCH_P4_CNTRVAL_MASK ((1ULL << ARCH_P4_CNTRVAL_BITS) - 1)
#define ARCH_P4_UNFLAGGED_BIT ((1ULL) << (ARCH_P4_CNTRVAL_BITS - 1))
#define P4_ESCR_EVENT_MASK 0x7e000000U
#define P4_ESCR_EVENT_SHIFT 25
......
arch/x86/include/asm/smpboot_hooks.h
浏览文件 @ 8688a1a8
......@@ -34,7 +34,7 @@ static inline void smpboot_restore_warm_reset_vector(void)
*/
CMOS_WRITE(0, 0xf);
*((volatile long *)phys_to_virt(apic->trampoline_phys_low)) = 0;
*((volatile u32 *)phys_to_virt(apic->trampoline_phys_low)) = 0;
}
static inline void __init smpboot_setup_io_apic(void)
......
arch/x86/kernel/acpi/boot.c
浏览文件 @ 8688a1a8
......@@ -72,6 +72,7 @@ u8 acpi_sci_flags __initdata;
int acpi_sci_override_gsi __initdata;
int acpi_skip_timer_override __initdata;
int acpi_use_timer_override __initdata;
int acpi_fix_pin2_polarity __initdata;
#ifdef CONFIG_X86_LOCAL_APIC
static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
......@@ -415,10 +416,15 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
return 0;
}
if (acpi_skip_timer_override &&
intsrc->source_irq == 0 && intsrc->global_irq == 2) {
printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
return 0;
if (intsrc->source_irq == 0 && intsrc->global_irq == 2) {
if (acpi_skip_timer_override) {
printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
return 0;
}
if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
}
}
mp_override_legacy_irq(intsrc->source_irq,
......
arch/x86/kernel/apb_timer.c
浏览文件 @ 8688a1a8
......@@ -284,7 +284,7 @@ static int __init apbt_clockevent_register(void)
memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device));
if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {
apbt_clockevent.rating = APBT_CLOCKEVENT_RATING - 100;
adev->evt.rating = APBT_CLOCKEVENT_RATING - 100;
global_clock_event = &adev->evt;
printk(KERN_DEBUG "%s clockevent registered as global\n",
global_clock_event->name);
......
arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
浏览文件 @ 8688a1a8
......@@ -158,9 +158,9 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
{
if (c->x86 == 0x06) {
if (cpu_has(c, X86_FEATURE_EST))
printk(KERN_WARNING PFX "Warning: EST-capable CPU "
"detected. The acpi-cpufreq module offers "
"voltage scaling in addition of frequency "
printk_once(KERN_WARNING PFX "Warning: EST-capable "
"CPU detected. The acpi-cpufreq module offers "
"voltage scaling in addition to frequency "
"scaling. You should use that instead of "
"p4-clockmod, if possible.\n");
switch (c->x86_model) {
......
arch/x86/kernel/cpu/cpufreq/powernow-k8.c
浏览文件 @ 8688a1a8
......@@ -1537,6 +1537,7 @@ static struct notifier_block cpb_nb = {
static int __cpuinit powernowk8_init(void)
{
unsigned int i, supported_cpus = 0, cpu;
int rv;
for_each_online_cpu(i) {
int rc;
......@@ -1555,14 +1556,14 @@ static int __cpuinit powernowk8_init(void)
cpb_capable = true;
register_cpu_notifier(&cpb_nb);
msrs = msrs_alloc();
if (!msrs) {
printk(KERN_ERR "%s: Error allocating msrs!\n", __func__);
return -ENOMEM;
}
register_cpu_notifier(&cpb_nb);
rdmsr_on_cpus(cpu_online_mask, MSR_K7_HWCR, msrs);
for_each_cpu(cpu, cpu_online_mask) {
......@@ -1574,7 +1575,13 @@ static int __cpuinit powernowk8_init(void)
(cpb_enabled ? "on" : "off"));
}
return cpufreq_register_driver(&cpufreq_amd64_driver);
rv = cpufreq_register_driver(&cpufreq_amd64_driver);
if (rv < 0 && boot_cpu_has(X86_FEATURE_CPB)) {
unregister_cpu_notifier(&cpb_nb);
msrs_free(msrs);
msrs = NULL;
}
return rv;
}
/* driver entry point for term */
......
arch/x86/kernel/cpu/perf_event_p4.c
浏览文件 @ 8688a1a8
......@@ -770,9 +770,14 @@ static inline int p4_pmu_clear_cccr_ovf(struct hw_perf_event *hwc)
return 1;
}
/* it might be unflagged overflow */
rdmsrl(hwc->event_base + hwc->idx, v);
if (!(v & ARCH_P4_CNTRVAL_MASK))
/*
* In some circumstances the overflow might issue an NMI but did
* not set P4_CCCR_OVF bit. Because a counter holds a negative value
* we simply check for high bit being set, if it's cleared it means
* the counter has reached zero value and continued counting before
* real NMI signal was received:
*/
if (!(v & ARCH_P4_UNFLAGGED_BIT))
return 1;
return 0;
......
arch/x86/kernel/early-quirks.c
浏览文件 @ 8688a1a8
......@@ -143,15 +143,10 @@ static void __init ati_bugs(int num, int slot, int func)
static u32 __init ati_sbx00_rev(int num, int slot, int func)
{
u32 old, d;
u32 d;
d = read_pci_config(num, slot, func, 0x70);
old = d;
d &= ~(1<<8);
write_pci_config(num, slot, func, 0x70, d);
d = read_pci_config(num, slot, func, 0x8);
d &= 0xff;
write_pci_config(num, slot, func, 0x70, old);
return d;
}
......@@ -160,13 +155,16 @@ static void __init ati_bugs_contd(int num, int slot, int func)
{
u32 d, rev;
if (acpi_use_timer_override)
return;
rev = ati_sbx00_rev(num, slot, func);
if (rev >= 0x40)
acpi_fix_pin2_polarity = 1;
if (rev > 0x13)
return;
if (acpi_use_timer_override)
return;
/* check for IRQ0 interrupt swap */
d = read_pci_config(num, slot, func, 0x64);
if (!(d & (1<<14)))
......
arch/x86/kernel/reboot.c
浏览文件 @ 8688a1a8
......@@ -285,6 +285,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
DMI_MATCH(DMI_BOARD_NAME, "P4S800"),
},
},
{ /* Handle problems with rebooting on VersaLogic Menlow boards */
.callback = set_bios_reboot,
.ident = "VersaLogic Menlow based board",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "VersaLogic Corporation"),
DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"),
},
},
{ }
};
......
arch/x86/kvm/svm.c
浏览文件 @ 8688a1a8
......@@ -2777,6 +2777,8 @@ static int dr_interception(struct vcpu_svm *svm)
kvm_register_write(&svm->vcpu, reg, val);
}
skip_emulated_instruction(&svm->vcpu);
return 1;
}
......
arch/x86/platform/olpc/olpc_dt.c
浏览文件 @ 8688a1a8
......@@ -140,8 +140,7 @@ void * __init prom_early_alloc(unsigned long size)
* wasted bootmem) and hand off chunks of it to callers.
*/
res = alloc_bootmem(chunk_size);
if (!res)
return NULL;
BUG_ON(!res);
prom_early_allocated += chunk_size;
memset(res, 0, chunk_size);
free_mem = chunk_size;
......
block/blk-core.c
浏览文件 @ 8688a1a8
......@@ -352,7 +352,7 @@ void blk_start_queue(struct request_queue *q)
WARN_ON(!irqs_disabled());
queue_flag_clear(QUEUE_FLAG_STOPPED, q);
__blk_run_queue(q);
__blk_run_queue(q, false);
}
EXPORT_SYMBOL(blk_start_queue);
......@@ -403,13 +403,14 @@ EXPORT_SYMBOL(blk_sync_queue);
/**
* __blk_run_queue - run a single device queue
* @q: The queue to run
* @force_kblockd: Don't run @q->request_fn directly. Use kblockd.
*
* Description:
* See @blk_run_queue. This variant must be called with the queue lock
* held and interrupts disabled.
*
*/
void __blk_run_queue(struct request_queue *q)
void __blk_run_queue(struct request_queue *q, bool force_kblockd)
{
blk_remove_plug(q);
......@@ -423,7 +424,7 @@ void __blk_run_queue(struct request_queue *q)
* Only recurse once to avoid overrunning the stack, let the unplug
* handling reinvoke the handler shortly if we already got there.
*/
if (!queue_flag_test_and_set(QUEUE_FLAG_REENTER, q)) {
if (!force_kblockd && !queue_flag_test_and_set(QUEUE_FLAG_REENTER, q)) {
q->request_fn(q);
queue_flag_clear(QUEUE_FLAG_REENTER, q);
} else {
......@@ -446,7 +447,7 @@ void blk_run_queue(struct request_queue *q)
unsigned long flags;
spin_lock_irqsave(q->queue_lock, flags);
__blk_run_queue(q);
__blk_run_queue(q, false);
spin_unlock_irqrestore(q->queue_lock, flags);
}
EXPORT_SYMBOL(blk_run_queue);
......@@ -1053,7 +1054,7 @@ void blk_insert_request(struct request_queue *q, struct request *rq,
drive_stat_acct(rq, 1);
__elv_add_request(q, rq, where, 0);
__blk_run_queue(q);
__blk_run_queue(q, false);
spin_unlock_irqrestore(q->queue_lock, flags);
}
EXPORT_SYMBOL(blk_insert_request);
......@@ -2610,13 +2611,6 @@ int kblockd_schedule_work(struct request_queue *q, struct work_struct *work)
}
EXPORT_SYMBOL(kblockd_schedule_work);
int kblockd_schedule_delayed_work(struct request_queue *q,
struct delayed_work *dwork, unsigned long delay)
{
return queue_delayed_work(kblockd_workqueue, dwork, delay);
}
EXPORT_SYMBOL(kblockd_schedule_delayed_work);
int __init blk_dev_init(void)
{
BUILD_BUG_ON(__REQ_NR_BITS > 8 *
......
block/blk-flush.c
浏览文件 @ 8688a1a8
......@@ -66,10 +66,12 @@ static void blk_flush_complete_seq_end_io(struct request_queue *q,
/*
* Moving a request silently to empty queue_head may stall the
* queue. Kick the queue in those cases.
* queue. Kick the queue in those cases. This function is called
* from request completion path and calling directly into
* request_fn may confuse the driver. Always use kblockd.
*/
if (was_empty && next_rq)
__blk_run_queue(q);
__blk_run_queue(q, true);
}
static void pre_flush_end_io(struct request *rq, int error)
......@@ -130,7 +132,7 @@ static struct request *queue_next_fseq(struct request_queue *q)
BUG();
}
elv_insert(q, rq, ELEVATOR_INSERT_FRONT);
elv_insert(q, rq, ELEVATOR_INSERT_REQUEUE);
return rq;
}
......
block/blk-lib.c
浏览文件 @ 8688a1a8
......@@ -132,7 +132,7 @@ static void bio_batch_end_io(struct bio *bio, int err)
}
/**
* blkdev_issue_zeroout generate number of zero filed write bios
* blkdev_issue_zeroout - generate number of zero filed write bios
* @bdev: blockdev to issue
* @sector: start sector
* @nr_sects: number of sectors to write
......
block/blk-throttle.c
浏览文件 @ 8688a1a8
......@@ -20,6 +20,11 @@ static int throtl_quantum = 32;
/* Throttling is performed over 100ms slice and after that slice is renewed */
static unsigned long throtl_slice = HZ/10; /* 100 ms */
/* A workqueue to queue throttle related work */
static struct workqueue_struct *kthrotld_workqueue;
static void throtl_schedule_delayed_work(struct throtl_data *td,
unsigned long delay);
struct throtl_rb_root {
struct rb_root rb;
struct rb_node *left;
......@@ -345,10 +350,9 @@ static void throtl_schedule_next_dispatch(struct throtl_data *td)
update_min_dispatch_time(st);
if (time_before_eq(st->min_disptime, jiffies))
throtl_schedule_delayed_work(td->queue, 0);
throtl_schedule_delayed_work(td, 0);
else
throtl_schedule_delayed_work(td->queue,
(st->min_disptime - jiffies));
throtl_schedule_delayed_work(td, (st->min_disptime - jiffies));
}
static inline void
......@@ -815,10 +819,10 @@ void blk_throtl_work(struct work_struct *work)
}
/* Call with queue lock held */
void throtl_schedule_delayed_work(struct request_queue *q, unsigned long delay)
static void
throtl_schedule_delayed_work(struct throtl_data *td, unsigned long delay)
{
struct throtl_data *td = q->td;
struct delayed_work *dwork = &td->throtl_work;
if (total_nr_queued(td) > 0) {
......@@ -827,12 +831,11 @@ void throtl_schedule_delayed_work(struct request_queue *q, unsigned long delay)
* Cancel that and schedule a new one.
*/
__cancel_delayed_work(dwork);
kblockd_schedule_delayed_work(q, dwork, delay);
queue_delayed_work(kthrotld_workqueue, dwork, delay);
throtl_log(td, "schedule work. delay=%lu jiffies=%lu",
delay, jiffies);
}
}
EXPORT_SYMBOL(throtl_schedule_delayed_work);
static void
throtl_destroy_tg(struct throtl_data *td, struct throtl_grp *tg)
......@@ -920,7 +923,7 @@ static void throtl_update_blkio_group_read_bps(void *key,
smp_mb__after_atomic_inc();
/* Schedule a work now to process the limit change */
throtl_schedule_delayed_work(td->queue, 0);
throtl_schedule_delayed_work(td, 0);
}
static void throtl_update_blkio_group_write_bps(void *key,
......@@ -934,7 +937,7 @@ static void throtl_update_blkio_group_write_bps(void *key,
smp_mb__before_atomic_inc();
atomic_inc(&td->limits_changed);
smp_mb__after_atomic_inc();
throtl_schedule_delayed_work(td->queue, 0);
throtl_schedule_delayed_work(td, 0);
}
static void throtl_update_blkio_group_read_iops(void *key,
......@@ -948,7 +951,7 @@ static void throtl_update_blkio_group_read_iops(void *key,
smp_mb__before_atomic_inc();
atomic_inc(&td->limits_changed);
smp_mb__after_atomic_inc();
throtl_schedule_delayed_work(td->queue, 0);
throtl_schedule_delayed_work(td, 0);
}
static void throtl_update_blkio_group_write_iops(void *key,
......@@ -962,7 +965,7 @@ static void throtl_update_blkio_group_write_iops(void *key,
smp_mb__before_atomic_inc();
atomic_inc(&td->limits_changed);
smp_mb__after_atomic_inc();
throtl_schedule_delayed_work(td->queue, 0);
throtl_schedule_delayed_work(td, 0);
}
void throtl_shutdown_timer_wq(struct request_queue *q)
......@@ -1135,6 +1138,10 @@ void blk_throtl_exit(struct request_queue *q)
static int __init throtl_init(void)
{
kthrotld_workqueue = alloc_workqueue("kthrotld", WQ_MEM_RECLAIM, 0);
if (!kthrotld_workqueue)
panic("Failed to create kthrotld\n");
blkio_policy_register(&blkio_policy_throtl);
return 0;
}
......
block/cfq-iosched.c
浏览文件 @ 8688a1a8
......@@ -3355,7 +3355,7 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
cfqd->busy_queues > 1) {
cfq_del_timer(cfqd, cfqq);
cfq_clear_cfqq_wait_request(cfqq);
__blk_run_queue(cfqd->queue);
__blk_run_queue(cfqd->queue, false);
} else {
cfq_blkiocg_update_idle_time_stats(
&cfqq->cfqg->blkg);
......@@ -3370,7 +3370,7 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
* this new queue is RT and the current one is BE
*/
cfq_preempt_queue(cfqd, cfqq);
__blk_run_queue(cfqd->queue);
__blk_run_queue(cfqd->queue, false);
}
}
......@@ -3731,7 +3731,7 @@ static void cfq_kick_queue(struct work_struct *work)
struct request_queue *q = cfqd->queue;
spin_lock_irq(q->queue_lock);
__blk_run_queue(cfqd->queue);
__blk_run_queue(cfqd->queue, false);
spin_unlock_irq(q->queue_lock);
}
......
block/elevator.c
浏览文件 @ 8688a1a8
......@@ -602,7 +602,7 @@ void elv_quiesce_start(struct request_queue *q)
*/
elv_drain_elevator(q);
while (q->rq.elvpriv) {
__blk_run_queue(q);
__blk_run_queue(q, false);
spin_unlock_irq(q->queue_lock);
msleep(10);
spin_lock_irq(q->queue_lock);
......@@ -651,7 +651,7 @@ void elv_insert(struct request_queue *q, struct request *rq, int where)
* with anything. There's no point in delaying queue
* processing.
*/
__blk_run_queue(q);
__blk_run_queue(q, false);
break;
case ELEVATOR_INSERT_SORT:
......
block/genhd.c
浏览文件 @ 8688a1a8
......@@ -1355,7 +1355,7 @@ int invalidate_partition(struct gendisk *disk, int partno)
struct block_device *bdev = bdget_disk(disk, partno);
if (bdev) {
fsync_bdev(bdev);
res = __invalidate_device(bdev);
res = __invalidate_device(bdev, true);
bdput(bdev);
}
return res;
......
block/ioctl.c
浏览文件 @ 8688a1a8
......@@ -294,9 +294,11 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
return -EINVAL;
if (get_user(n, (int __user *) arg))
return -EFAULT;
if (!(mode & FMODE_EXCL) &&
blkdev_get(bdev, mode | FMODE_EXCL, &bdev) < 0)
return -EBUSY;
if (!(mode & FMODE_EXCL)) {
bdgrab(bdev);
if (blkdev_get(bdev, mode | FMODE_EXCL, &bdev) < 0)
return -EBUSY;
}
ret = set_blocksize(bdev, n);
if (!(mode & FMODE_EXCL))
blkdev_put(bdev, mode | FMODE_EXCL);
......
drivers/acpi/acpica/aclocal.h
浏览文件 @ 8688a1a8
......@@ -416,10 +416,15 @@ struct acpi_gpe_handler_info {
u8 originally_enabled; /* True if GPE was originally enabled */
};
struct acpi_gpe_notify_object {
struct acpi_namespace_node *node;
struct acpi_gpe_notify_object *next;
};
union acpi_gpe_dispatch_info {
struct acpi_namespace_node *method_node; /* Method node for this GPE level */
struct acpi_gpe_handler_info *handler; /* Installed GPE handler */
struct acpi_namespace_node *device_node; /* Parent _PRW device for implicit notify */
struct acpi_gpe_notify_object device; /* List of _PRW devices for implicit notify */
};
/*
......
drivers/acpi/acpica/evgpe.c
浏览文件 @ 8688a1a8
......@@ -457,6 +457,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
acpi_status status;
struct acpi_gpe_event_info *local_gpe_event_info;
struct acpi_evaluate_info *info;
struct acpi_gpe_notify_object *notify_object;
ACPI_FUNCTION_TRACE(ev_asynch_execute_gpe_method);
......@@ -508,10 +509,18 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
* from this thread -- because handlers may in turn run other
* control methods.
*/
status =
acpi_ev_queue_notify_request(local_gpe_event_info->dispatch.
device_node,
ACPI_NOTIFY_DEVICE_WAKE);
status = acpi_ev_queue_notify_request(
local_gpe_event_info->dispatch.device.node,
ACPI_NOTIFY_DEVICE_WAKE);
notify_object = local_gpe_event_info->dispatch.device.next;
while (ACPI_SUCCESS(status) && notify_object) {
status = acpi_ev_queue_notify_request(
notify_object->node,
ACPI_NOTIFY_DEVICE_WAKE);
notify_object = notify_object->next;
}
break;
case ACPI_GPE_DISPATCH_METHOD:
......
drivers/acpi/acpica/evxfgpe.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/acpi/debugfs.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/block/floppy.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/block/loop.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/bluetooth/ath3k.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/bluetooth/btusb.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/char/agp/amd64-agp.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/char/agp/intel-agp.h
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/char/agp/intel-gtt.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/char/pcmcia/cm4000_cs.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/char/tpm/tpm.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/char/virtio_console.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/cpufreq/cpufreq.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/gpu/drm/drm_fb_helper.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/gpu/drm/drm_irq.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/gpu/drm/i915/i915_debugfs.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/gpu/drm/i915/i915_dma.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/gpu/drm/i915/i915_drv.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/gpu/drm/i915/i915_drv.h
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/gpu/drm/i915/i915_gem.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/gpu/drm/i915/i915_irq.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/gpu/drm/i915/i915_reg.h
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/gpu/drm/nouveau/nv50_vm.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/gpu/drm/radeon/r100.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/gpu/drm/radeon/radeon_fb.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/hwmon/ad7414.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/hwmon/adt7411.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/i2c/busses/i2c-omap.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/i2c/busses/i2c-stu300.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/idle/intel_idle.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/input/gameport/gameport.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/input/keyboard/tegra-kbc.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/input/mouse/synaptics.h
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/input/serio/serio.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/md/linear.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/md/md.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/md/md.h
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/md/multipath.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/md/raid0.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/md/raid1.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/md/raid10.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/md/raid5.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/mfd/asic3.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/mfd/davinci_voicecodec.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/mfd/tps6586x.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/mfd/ucb1x00-ts.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/mfd/wm8994-core.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/misc/bmp085.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/mmc/core/sdio.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/bnx2x/bnx2x.h
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/bnx2x/bnx2x_cmn.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/bnx2x/bnx2x_cmn.h
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/bnx2x/bnx2x_ethtool.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/bnx2x/bnx2x_init.h
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/bnx2x/bnx2x_main.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/bnx2x/bnx2x_stats.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/cnic.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/davinci_emac.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/dm9000.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/dnet.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/e1000/e1000_osdep.h
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/e1000e/netdev.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/fec.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/igbvf/vf.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/macb.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/pcmcia/fmvj18x_cs.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/r8169.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/sfc/ethtool.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/skge.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/usb/dm9601.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/wireless/p54/p54pci.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/wireless/p54/p54usb.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/net/wireless/rndis_wlan.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/nfc/Kconfig
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/nfc/pn544.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/of/pdt.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/pcmcia/pcmcia_resource.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/pcmcia/pxa2xx_base.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/pcmcia/pxa2xx_base.h
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/pcmcia/pxa2xx_colibri.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/pcmcia/pxa2xx_lubbock.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/pps/generators/Kconfig
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/pps/kapi.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/rapidio/rio-sysfs.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/regulator/wm831x-dcdc.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/rtc/rtc-at91sam9.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/rtc/rtc-ds3232.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/rtc/rtc-s3c.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/s390/block/xpram.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/s390/char/keyboard.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/s390/char/tape.h
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/s390/char/tape_34xx.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/s390/char/tape_3590.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/scsi/scsi_lib.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/scsi/scsi_transport_fc.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/thermal/Kconfig
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/thermal/thermal_sys.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/tty/serial/serial_cs.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/usb/core/hub.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/usb/core/quirks.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/usb/gadget/f_phonet.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/usb/host/ehci-xilinx-of.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/usb/host/xhci-dbg.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/usb/host/xhci-mem.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/usb/host/xhci-ring.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/usb/host/xhci.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/usb/host/xhci.h
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/usb/musb/musb_core.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/usb/musb/musb_core.h
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/usb/musb/omap2430.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/usb/serial/sierra.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/usb/serial/usb_wwan.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/usb/serial/visor.c
浏览文件 @ 8688a1a8
此差异已折叠。
drivers/video/backlight/ltv350qv.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/afs/write.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/aio.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/block_dev.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/btrfs/ctree.h
浏览文件 @ 8688a1a8
此差异已折叠。
fs/btrfs/extent-tree.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/btrfs/extent_io.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/btrfs/extent_io.h
浏览文件 @ 8688a1a8
此差异已折叠。
fs/btrfs/inode.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/btrfs/ioctl.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/btrfs/lzo.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/btrfs/relocation.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/btrfs/super.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/btrfs/volumes.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/ceph/dir.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/ceph/inode.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/ceph/super.h
浏览文件 @ 8688a1a8
此差异已折叠。
fs/eventpoll.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/exofs/namei.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/ext2/namei.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/fuse/dir.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/fuse/file.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/fuse/fuse_i.h
浏览文件 @ 8688a1a8
此差异已折叠。
fs/gfs2/main.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/hfs/dir.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/inode.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/internal.h
浏览文件 @ 8688a1a8
此差异已折叠。
fs/minix/namei.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/namespace.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/nfs/nfs4proc.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/nilfs2/btnode.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/nilfs2/btnode.h
浏览文件 @ 8688a1a8
此差异已折叠。
fs/nilfs2/mdt.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/nilfs2/namei.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/nilfs2/page.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/nilfs2/page.h
浏览文件 @ 8688a1a8
此差异已折叠。
fs/nilfs2/segment.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/nilfs2/super.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/ocfs2/journal.h
浏览文件 @ 8688a1a8
此差异已折叠。
fs/ocfs2/refcounttree.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/ocfs2/super.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/partitions/ldm.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/proc/proc_devtree.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/reiserfs/namei.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/sysv/namei.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/udf/namei.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/ufs/namei.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/xfs/linux-2.6/xfs_discard.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/xfs/linux-2.6/xfs_ioctl.c
浏览文件 @ 8688a1a8
此差异已折叠。
fs/xfs/xfs_fsops.c
浏览文件 @ 8688a1a8
此差异已折叠。
include/asm-generic/pgtable.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/drm/drmP.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/keys/rxrpc-type.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/linux/blkdev.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/linux/blktrace_api.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/linux/ceph/messenger.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/linux/dcbnl.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/linux/fs.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/linux/gfp.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/linux/mfd/wm8994/core.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/linux/pm.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/linux/pm_wakeup.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/linux/ptrace.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/linux/rio_regs.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/linux/thermal.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/net/ipv6.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/net/sch_generic.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/pcmcia/ds.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/sound/wm8903.h
浏览文件 @ 8688a1a8
此差异已折叠。
include/trace/events/block.h
浏览文件 @ 8688a1a8
此差异已折叠。
kernel/cpuset.c
浏览文件 @ 8688a1a8
此差异已折叠。
kernel/irq/internals.h
浏览文件 @ 8688a1a8
此差异已折叠。
kernel/irq/irqdesc.c
浏览文件 @ 8688a1a8
此差异已折叠。
kernel/irq/manage.c
浏览文件 @ 8688a1a8
此差异已折叠。
kernel/irq/resend.c
浏览文件 @ 8688a1a8
此差异已折叠。
kernel/perf_event.c
浏览文件 @ 8688a1a8
此差异已折叠。
kernel/ptrace.c
浏览文件 @ 8688a1a8
此差异已折叠。
kernel/time/tick-broadcast.c
浏览文件 @ 8688a1a8
此差异已折叠。
kernel/time/tick-common.c
浏览文件 @ 8688a1a8
此差异已折叠。
kernel/time/tick-internal.h
浏览文件 @ 8688a1a8
此差异已折叠。
kernel/trace/blktrace.c
浏览文件 @ 8688a1a8
此差异已折叠。
lib/nlattr.c
浏览文件 @ 8688a1a8
此差异已折叠。
lib/swiotlb.c
浏览文件 @ 8688a1a8
此差异已折叠。
mm/huge_memory.c
浏览文件 @ 8688a1a8
此差异已折叠。
mm/memory.c
浏览文件 @ 8688a1a8
此差异已折叠。
mm/mempolicy.c
浏览文件 @ 8688a1a8
此差异已折叠。
mm/migrate.c
浏览文件 @ 8688a1a8
此差异已折叠。
mm/mremap.c
浏览文件 @ 8688a1a8
此差异已折叠。
mm/page_alloc.c
浏览文件 @ 8688a1a8
此差异已折叠。
mm/swapfile.c
浏览文件 @ 8688a1a8
此差异已折叠。
mm/truncate.c
浏览文件 @ 8688a1a8
此差异已折叠。
mm/vmscan.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/bluetooth/rfcomm/tty.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/bridge/br_multicast.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/ceph/messenger.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/ceph/pagevec.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/core/dev_addr_lists.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/dcb/dcbnl.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/dccp/input.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/dns_resolver/dns_key.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/ipv4/inet_timewait_sock.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/ipv4/tcp_input.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/ipv4/tcp_output.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/ipv6/netfilter/ip6t_LOG.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/ipv6/route.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/mac80211/iface.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/mac80211/mlme.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/netfilter/ipvs/ip_vs_ctl.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/netfilter/nf_log.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/netfilter/nf_tproxy_core.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/netfilter/xt_TPROXY.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/netfilter/xt_socket.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/netlink/af_netlink.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/rxrpc/ar-input.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/rxrpc/ar-key.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/sched/sch_generic.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/sctp/sm_make_chunk.c
浏览文件 @ 8688a1a8
此差异已折叠。
net/wireless/wext-compat.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/core/jack.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/pci/hda/patch_cirrus.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/pci/hda/patch_conexant.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/pci/hda/patch_hdmi.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/pci/hda/patch_realtek.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/pci/hda/patch_sigmatel.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/pci/hda/patch_via.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/codecs/cx20442.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/codecs/wm8903.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/codecs/wm8903.h
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/codecs/wm8994.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/codecs/wm9081.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/codecs/wm_hubs.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/imx/eukrea-tlv320.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/pxa/e740_wm9705.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/pxa/e750_wm9705.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/pxa/e800_wm9712.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/pxa/em-x270.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/pxa/mioa701_wm9713.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/pxa/palm27x.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/pxa/tosa.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/pxa/zylonite.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/soc/soc-dapm.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/usb/card.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/usb/pcm.c
浏览文件 @ 8688a1a8
此差异已折叠。
sound/usb/usbaudio.h
浏览文件 @ 8688a1a8
此差异已折叠。
tools/perf/builtin-timechart.c
浏览文件 @ 8688a1a8
此差异已折叠。
tools/perf/util/hist.c
浏览文件 @ 8688a1a8
此差异已折叠。
tools/perf/util/svghelper.c
浏览文件 @ 8688a1a8
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或