提交 866b6ddd 编写于 作者: L Li Yang 提交者: Kumar Gala

[POWERPC] 83xx: USB device tree cleanups

Remove device_type = "usb" for 83xx SoC USB controller
Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
上级 e10241d8
......@@ -1411,7 +1411,6 @@ platforms are moved over to use the flattened-device-tree model.
Example multi port host USB controller device node :
usb@22000 {
device_type = "usb";
compatible = "fsl-usb2-mph";
reg = <22000 1000>;
#address-cells = <1>;
......@@ -1425,7 +1424,6 @@ platforms are moved over to use the flattened-device-tree model.
Example dual role USB controller device node :
usb@23000 {
device_type = "usb";
compatible = "fsl-usb2-dr";
reg = <23000 1000>;
#address-cells = <1>;
......@@ -1589,7 +1587,6 @@ platforms are moved over to use the flattened-device-tree model.
iii) USB (Universal Serial Bus Controller)
Required properties:
- device_type : should be "usb".
- compatible : could be "qe_udc" or "fhci-hcd".
- mode : the could be "host" or "slave".
- reg : Offset and length of the register set for the device
......@@ -1603,7 +1600,6 @@ platforms are moved over to use the flattened-device-tree model.
Example(slave):
usb@6c0 {
device_type = "usb";
compatible = "qe_udc";
reg = <6c0 40>;
interrupts = <8b 0>;
......
......@@ -92,7 +92,6 @@
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
device_type = "usb";
compatible = "fsl-usb2-dr";
reg = <23000 1000>;
#address-cells = <1>;
......
......@@ -210,7 +210,6 @@
};
usb@6c0 {
device_type = "usb";
compatible = "qe_udc";
reg = <6c0 40 8B00 100>;
interrupts = <b>;
......
......@@ -91,7 +91,6 @@
};
usb@22000 {
device_type = "usb";
compatible = "fsl-usb2-mph";
reg = <22000 1000>;
#address-cells = <1>;
......@@ -103,7 +102,6 @@
};
usb@23000 {
device_type = "usb";
compatible = "fsl-usb2-dr";
reg = <23000 1000>;
#address-cells = <1>;
......
......@@ -89,7 +89,6 @@
};
usb@23000 {
device_type = "usb";
compatible = "fsl-usb2-dr";
reg = <23000 1000>;
#address-cells = <1>;
......
......@@ -104,7 +104,6 @@
/* phy type (ULPI or SERIAL) are only types supportted for MPH */
/* port = 0 or 1 */
usb@22000 {
device_type = "usb";
compatible = "fsl-usb2-mph";
reg = <22000 1000>;
#address-cells = <1>;
......@@ -116,7 +115,6 @@
};
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
device_type = "usb";
compatible = "fsl-usb2-dr";
reg = <23000 1000>;
#address-cells = <1>;
......
......@@ -241,7 +241,6 @@
};
usb@6c0 {
device_type = "usb";
compatible = "qe_udc";
reg = <6c0 40 8B00 100>;
interrupts = <b>;
......
......@@ -41,7 +41,7 @@ int mpc834x_usb_cfg(void)
sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK;
sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI;
np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr");
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
if (np) {
sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */
......@@ -67,7 +67,7 @@ int mpc834x_usb_cfg(void)
port0_is_dr = 1;
of_node_put(np);
}
np = of_find_compatible_node(NULL, "usb", "fsl-usb2-mph");
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-mph");
if (np) {
sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */
......@@ -111,7 +111,7 @@ int mpc831x_usb_cfg(void)
const void *dr_mode;
#endif
np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr");
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
if (!np)
return -ENODEV;
prop = of_get_property(np, "phy_type", NULL);
......@@ -188,7 +188,7 @@ int mpc837x_usb_cfg(void)
const void *prop;
int ret = 0;
np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr");
np = of_find_compatible_node(NULL, NULL, "fsl-usb2-dr");
if (!np)
return -ENODEV;
prop = of_get_property(np, "phy_type", NULL);
......
......@@ -531,14 +531,12 @@ static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
static int __init fsl_usb_of_init(void)
{
struct device_node *np;
unsigned int i;
unsigned int i = 0;
struct platform_device *usb_dev_mph = NULL, *usb_dev_dr_host = NULL,
*usb_dev_dr_client = NULL;
int ret;
for (np = NULL, i = 0;
(np = of_find_compatible_node(np, "usb", "fsl-usb2-mph")) != NULL;
i++) {
for_each_compatible_node(np, NULL, "fsl-usb2-mph") {
struct resource r[2];
struct fsl_usb2_platform_data usb_data;
const unsigned char *prop = NULL;
......@@ -581,11 +579,10 @@ static int __init fsl_usb_of_init(void)
fsl_usb2_platform_data));
if (ret)
goto unreg_mph;
i++;
}
for (np = NULL;
(np = of_find_compatible_node(np, "usb", "fsl-usb2-dr")) != NULL;
i++) {
for_each_compatible_node(np, NULL, "fsl-usb2-dr") {
struct resource r[2];
struct fsl_usb2_platform_data usb_data;
const unsigned char *prop = NULL;
......@@ -657,6 +654,7 @@ static int __init fsl_usb_of_init(void)
fsl_usb2_platform_data))))
goto unreg_dr;
}
i++;
}
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册