net: hns: add attribute port-rst-offset for dsaf port node

The reset offset for each port in a dsaf is different. The current code is
not so readability. This patch adds configuration named port-rst-offset to
make the code simple and more readability. If this attribute doesn't exist,
default value of this attribute is equal to its port index.
Signed-off-by: NYisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c

@@ -664,6 +664,7 @@ static int  hns_mac_get_info(struct hns_mac_cb *mac_cb)
 
 	mac_cb->max_frm = MAC_DEFAULT_MTU;
 	mac_cb->tx_pause_frm_time = MAC_DEFAULT_PAUSE_TIME;
+	mac_cb->port_rst_off = mac_cb->mac_id;
 
 	/* if the dsaf node doesn't contain a port subnode, get phy-handle
 	 * from dsaf node
@@ -693,6 +694,15 @@ static int  hns_mac_get_info(struct hns_mac_cb *mac_cb)
 	}
 	mac_cb->serdes_ctrl = syscon;
 
+	ret = fwnode_property_read_u32(mac_cb->fw_port,
+				       "port-rst-offset",
+				       &mac_cb->port_rst_off);
+	if (ret) {
+		dev_dbg(mac_cb->dev,
+			"mac%d port-rst-offset not found, use default value.\n",
+			mac_cb->mac_id);
+	}
+
 	syscon = syscon_node_to_regmap(
 			of_parse_phandle(to_of_node(mac_cb->fw_port),
 					 "cpld-syscon", 0));

drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.h

@@ -318,6 +318,7 @@ struct hns_mac_cb {
 	struct regmap *serdes_ctrl;
 	struct regmap *cpld_ctrl;
 	u32 cpld_ctrl_reg;
+	u32 port_rst_off;
 	struct mac_entry_idx addr_entry_idx[DSAF_MAX_VM_NUM];
 	u8 sfp_prsnt;
 	u8 cpld_led_value;

drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c

@@ -135,11 +135,7 @@ void hns_dsaf_xge_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, u32 val)
 		return;
 
 	reg_val |= RESET_REQ_OR_DREQ;
-
-	if (!HNS_DSAF_IS_DEBUG(dsaf_dev))
-		reg_val |= 0x2082082 << port;
-	else
-		reg_val |= 0x2082082 << (dsaf_dev->reset_offset + 6);
+	reg_val |= 0x2082082 << dsaf_dev->mac_cb[port]->port_rst_off;
 
 	if (val == 0)
 		reg_addr = DSAF_SUB_SC_XGE_RESET_REQ_REG;
@@ -158,11 +154,8 @@ void hns_dsaf_xge_core_srst_by_port(struct dsaf_device *dsaf_dev,
 	if (port >= DSAF_XGE_NUM)
 		return;
 
-	if (!HNS_DSAF_IS_DEBUG(dsaf_dev))
-		reg_val |= XGMAC_TRX_CORE_SRST_M << port;
-	else
-		reg_val |= XGMAC_TRX_CORE_SRST_M <<
-			(dsaf_dev->reset_offset + 6);
+	reg_val |= XGMAC_TRX_CORE_SRST_M
+		<< dsaf_dev->mac_cb[port]->port_rst_off;
 
 	if (val == 0)
 		reg_addr = DSAF_SUB_SC_XGE_RESET_REQ_REG;
@@ -176,17 +169,19 @@ void hns_dsaf_ge_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, u32 val)
 {
 	u32 reg_val_1;
 	u32 reg_val_2;
+	u32 port_rst_off;
 
 	if (port >= DSAF_GE_NUM)
 		return;
 
 	if (!HNS_DSAF_IS_DEBUG(dsaf_dev)) {
 		reg_val_1  = 0x1 << port;
+		port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off;
 		/* there is difference between V1 and V2 in register.*/
 		if (AE_IS_VER1(dsaf_dev->dsaf_ver))
-			reg_val_2  = 0x1041041 << port;
+			reg_val_2  = 0x1041041 << port_rst_off;
 		else
-			reg_val_2  = 0x2082082 << port;
+			reg_val_2  = 0x2082082 << port_rst_off;
 
 		if (val == 0) {
 			dsaf_write_sub(dsaf_dev, DSAF_SUB_SC_GE_RESET_REQ1_REG,
@@ -226,11 +221,7 @@ void hns_ppe_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, u32 val)
 	u32 reg_val = 0;
 	u32 reg_addr;
 
-	if (!HNS_DSAF_IS_DEBUG(dsaf_dev))
-		reg_val |= RESET_REQ_OR_DREQ << port;
-	else
-		reg_val |= RESET_REQ_OR_DREQ <<
-			(dsaf_dev->reset_offset + 6);
+	reg_val |= RESET_REQ_OR_DREQ <<	dsaf_dev->mac_cb[port]->port_rst_off;
 
 	if (val == 0)
 		reg_addr = DSAF_SUB_SC_PPE_RESET_REQ_REG;