提交 840f51ff 编写于 作者: L Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix IRQ ->set_affinity() methods.
  sparc: cpumask_of_node() should handle -1 as a node
  sparc64: Update defconfig.
  sparc: Add missing SW perf fault events.
  sparc64: Fully support both performance counters.
  sparc64: Add perf callchain support.
  sparc: convert to arch_gettimeoffset()
  sparc: leds_resource.end assigned to itself in clock_board_probe()
  sparc32: Fix page_to_phys().
  sparc: Simplify param.h by simply including <asm-generic/param.h>
  sparc32: Update defconfig.
  SPARC: use helpers for rlimits
  sparc: copy_from_user() should not return -EFAULT
......@@ -64,8 +64,11 @@ config BITS
default 64 if SPARC64
config GENERIC_TIME
def_bool y
config ARCH_USES_GETTIMEOFFSET
bool
default y if SPARC64
default y if SPARC32
config GENERIC_CMOS_UPDATE
bool
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31
# Wed Sep 16 00:03:43 2009
# Linux kernel version: 2.6.33-rc2
# Mon Jan 11 23:20:31 2010
#
# CONFIG_64BIT is not set
CONFIG_SPARC=y
......@@ -41,6 +41,7 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
......@@ -88,21 +89,21 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Performance Counters
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
......@@ -131,14 +132,41 @@ CONFIG_LBDAF=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
......@@ -168,8 +196,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_SUN_PM=y
# CONFIG_SPARC_LED is not set
......@@ -257,6 +284,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
......@@ -295,9 +323,6 @@ CONFIG_NET_PKTGEN=m
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
......@@ -335,6 +360,10 @@ CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
......@@ -398,8 +427,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
......@@ -434,7 +466,9 @@ CONFIG_SCSI_QLOGICPTI=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SUNESP=y
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
......@@ -450,7 +484,7 @@ CONFIG_SCSI_SUNESP=y
#
#
# See the help texts for more information.
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
......@@ -487,6 +521,7 @@ CONFIG_SUNQE=m
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
......@@ -546,6 +581,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
......@@ -555,6 +591,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
......@@ -574,6 +611,7 @@ CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_XTKBD is not set
......@@ -604,6 +642,7 @@ CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
......@@ -636,6 +675,7 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
......@@ -661,6 +701,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
......@@ -675,9 +720,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
......@@ -699,6 +742,7 @@ CONFIG_SSB_POSSIBLE=y
#
# Graphics support
#
CONFIG_VGA_ARB=y
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
......@@ -776,7 +820,9 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
......@@ -955,6 +1001,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
......@@ -1003,9 +1050,9 @@ CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
......@@ -1013,7 +1060,11 @@ CONFIG_KGDB_TESTS=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31
# Tue Sep 15 17:06:03 2009
# Linux kernel version: 2.6.33-rc2
# Wed Jan 20 16:31:47 2010
#
CONFIG_64BIT=y
CONFIG_SPARC=y
......@@ -20,6 +20,7 @@ CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_MMU=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
......@@ -50,6 +51,7 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
......@@ -62,8 +64,7 @@ CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
......@@ -97,24 +98,25 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Performance Counters
# Kernel Performance Events And Counters
#
CONFIG_PERF_COUNTERS=y
CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
......@@ -152,14 +154,41 @@ CONFIG_BLOCK_COMPAT=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
......@@ -179,6 +208,7 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_SPARC64_SMP=y
CONFIG_EARLYFB=y
CONFIG_SPARC64_PAGE_SIZE_8KB=y
# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
CONFIG_SECCOMP=y
......@@ -216,8 +246,7 @@ CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
......@@ -315,6 +344,7 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
......@@ -356,9 +386,6 @@ CONFIG_NET_TCPPROBE=m
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
......@@ -376,6 +403,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
......@@ -397,6 +425,11 @@ CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
......@@ -408,6 +441,7 @@ CONFIG_ATA_OVER_ETH=m
CONFIG_SUNVDC=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
......@@ -415,6 +449,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
......@@ -522,8 +557,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
......@@ -557,7 +595,9 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SUNESP is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
......@@ -568,7 +608,9 @@ CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=m
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
......@@ -592,7 +634,7 @@ CONFIG_DM_ZERO=m
#
#
# See the help texts for more information.
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
......@@ -664,6 +706,7 @@ CONFIG_NET_PCI=y
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
......@@ -745,6 +788,7 @@ CONFIG_SLHC=m
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
......@@ -754,6 +798,7 @@ CONFIG_SLHC=m
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
......@@ -770,9 +815,13 @@ CONFIG_INPUT_EVDEV=y
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=m
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_XTKBD is not set
......@@ -812,6 +861,7 @@ CONFIG_SERIO_I8042=y
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
......@@ -844,6 +894,7 @@ CONFIG_SERIAL_SUNHV=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
......@@ -858,6 +909,7 @@ CONFIG_HW_RANDOM_N2RNG=m
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
......@@ -897,11 +949,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
......@@ -911,10 +958,6 @@ CONFIG_I2C_ALGOBIT=y
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
......@@ -932,6 +975,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
......@@ -955,6 +1003,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
......@@ -981,6 +1030,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
......@@ -993,9 +1043,8 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_ULTRA45 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
......@@ -1013,16 +1062,20 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
......@@ -1176,6 +1229,7 @@ CONFIG_SND_ALI5451=m
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
......@@ -1311,6 +1365,7 @@ CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
......@@ -1426,6 +1481,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
......@@ -1447,7 +1503,9 @@ CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
......@@ -1625,6 +1683,7 @@ CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
......@@ -1678,9 +1737,11 @@ CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
......@@ -1688,6 +1749,7 @@ CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
......@@ -1706,6 +1768,7 @@ CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
......@@ -1714,11 +1777,17 @@ CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
......
......@@ -8,7 +8,7 @@
#include <asm/page.h> /* IO address mapping routines need this */
#include <asm/system.h>
#define page_to_phys(page) (((page) - mem_map) << PAGE_SHIFT)
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
static inline u32 flip_dword (u32 l)
{
......
......@@ -143,7 +143,7 @@ extern unsigned long pfn_base;
#define phys_to_virt __va
#define ARCH_PFN_OFFSET (pfn_base)
#define virt_to_page(kaddr) (mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT)))
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define pfn_valid(pfn) (((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr))
#define virt_addr_valid(kaddr) ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr)
......
#ifndef _ASMSPARC_PARAM_H
#define _ASMSPARC_PARAM_H
#ifdef __KERNEL__
# define HZ CONFIG_HZ /* Internal kernel timer frequency */
# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ)
#endif
#ifndef HZ
#define HZ 100
#endif
#define EXEC_PAGESIZE 8192 /* Thanks for sun4's we carry baggage... */
#include <asm-generic/param.h>
#ifndef NOGROUP
#define NOGROUP (-1)
#endif
#define MAXHOSTNAMELEN 64 /* max length of hostname */
#endif
#endif /* _ASMSPARC_PARAM_H */
......@@ -12,4 +12,5 @@
typedef unsigned long cycles_t;
#define get_cycles() (0)
extern u32 (*do_arch_gettimeoffset)(void);
#endif
......@@ -12,7 +12,9 @@ static inline int cpu_to_node(int cpu)
#define parent_node(node) (node)
#define cpumask_of_node(node) (&numa_cpumask_lookup_table[node])
#define cpumask_of_node(node) ((node) == -1 ? \
cpu_all_mask : \
&numa_cpumask_lookup_table[node])
struct pci_bus;
#ifdef CONFIG_PCI
......
......@@ -274,7 +274,7 @@ static inline unsigned long copy_from_user(void *to, const void __user *from, un
if (unlikely(sz != -1 && sz < n)) {
copy_from_user_overflow();
return -EFAULT;
return n;
}
if (n && __access_ok((unsigned long) from, n))
......
......@@ -221,8 +221,8 @@ extern unsigned long copy_from_user_fixup(void *to, const void __user *from,
static inline unsigned long __must_check
copy_from_user(void *to, const void __user *from, unsigned long size)
{
unsigned long ret = (unsigned long) -EFAULT;
int sz = __compiletime_object_size(to);
unsigned long ret = size;
if (likely(sz == -1 || sz >= size)) {
ret = ___copy_from_user(to, from, size);
......
......@@ -99,7 +99,7 @@ static int __devinit clock_board_probe(struct of_device *op,
p->leds_resource.start = (unsigned long)
(p->clock_regs + CLOCK_CTRL);
p->leds_resource.end = p->leds_resource.end;
p->leds_resource.end = p->leds_resource.start;
p->leds_resource.name = "leds";
p->leds_pdev.name = "sunfire-clockboard-leds";
......@@ -194,7 +194,7 @@ static int __devinit fhc_probe(struct of_device *op,
if (!p->central) {
p->leds_resource.start = (unsigned long)
(p->pregs + FHC_PREGS_CTRL);
p->leds_resource.end = p->leds_resource.end;
p->leds_resource.end = p->leds_resource.start;
p->leds_resource.name = "leds";
p->leds_pdev.name = "sunfire-fhc-leds";
......
......@@ -250,12 +250,12 @@ struct irq_handler_data {
};
#ifdef CONFIG_SMP
static int irq_choose_cpu(unsigned int virt_irq)
static int irq_choose_cpu(unsigned int virt_irq, const struct cpumask *affinity)
{
cpumask_t mask;
int cpuid;
cpumask_copy(&mask, irq_desc[virt_irq].affinity);
cpumask_copy(&mask, affinity);
if (cpus_equal(mask, cpu_online_map)) {
cpuid = map_to_cpu(virt_irq);
} else {
......@@ -268,7 +268,7 @@ static int irq_choose_cpu(unsigned int virt_irq)
return cpuid;
}
#else
static int irq_choose_cpu(unsigned int virt_irq)
static int irq_choose_cpu(unsigned int virt_irq, const struct cpumask *affinity)
{
return real_hard_smp_processor_id();
}
......@@ -282,7 +282,8 @@ static void sun4u_irq_enable(unsigned int virt_irq)
unsigned long cpuid, imap, val;
unsigned int tid;
cpuid = irq_choose_cpu(virt_irq);
cpuid = irq_choose_cpu(virt_irq,
irq_desc[virt_irq].affinity);
imap = data->imap;
tid = sun4u_compute_tid(imap, cpuid);
......@@ -299,7 +300,24 @@ static void sun4u_irq_enable(unsigned int virt_irq)
static int sun4u_set_affinity(unsigned int virt_irq,
const struct cpumask *mask)
{
sun4u_irq_enable(virt_irq);
struct irq_handler_data *data = get_irq_chip_data(virt_irq);
if (likely(data)) {
unsigned long cpuid, imap, val;
unsigned int tid;
cpuid = irq_choose_cpu(virt_irq, mask);
imap = data->imap;
tid = sun4u_compute_tid(imap, cpuid);
val = upa_readq(imap);
val &= ~(IMAP_TID_UPA | IMAP_TID_JBUS |
IMAP_AID_SAFARI | IMAP_NID_SAFARI);
val |= tid | IMAP_VALID;
upa_writeq(val, imap);
upa_writeq(ICLR_IDLE, data->iclr);
}
return 0;
}
......@@ -340,7 +358,8 @@ static void sun4u_irq_eoi(unsigned int virt_irq)
static void sun4v_irq_enable(unsigned int virt_irq)
{
unsigned int ino = virt_irq_table[virt_irq].dev_ino;
unsigned long cpuid = irq_choose_cpu(virt_irq);
unsigned long cpuid = irq_choose_cpu(virt_irq,
irq_desc[virt_irq].affinity);
int err;
err = sun4v_intr_settarget(ino, cpuid);
......@@ -361,7 +380,7 @@ static int sun4v_set_affinity(unsigned int virt_irq,
const struct cpumask *mask)
{
unsigned int ino = virt_irq_table[virt_irq].dev_ino;
unsigned long cpuid = irq_choose_cpu(virt_irq);
unsigned long cpuid = irq_choose_cpu(virt_irq, mask);
int err;
err = sun4v_intr_settarget(ino, cpuid);
......@@ -403,7 +422,7 @@ static void sun4v_virq_enable(unsigned int virt_irq)
unsigned long cpuid, dev_handle, dev_ino;
int err;
cpuid = irq_choose_cpu(virt_irq);
cpuid = irq_choose_cpu(virt_irq, irq_desc[virt_irq].affinity);
dev_handle = virt_irq_table[virt_irq].dev_handle;
dev_ino = virt_irq_table[virt_irq].dev_ino;
......@@ -433,7 +452,7 @@ static int sun4v_virt_set_affinity(unsigned int virt_irq,
unsigned long cpuid, dev_handle, dev_ino;
int err;
cpuid = irq_choose_cpu(virt_irq);
cpuid = irq_choose_cpu(virt_irq, mask);
dev_handle = virt_irq_table[virt_irq].dev_handle;
dev_ino = virt_irq_table[virt_irq].dev_ino;
......
......@@ -30,6 +30,7 @@
#include <asm/oplib.h>
#include <asm/prom.h>
#include <asm/pcic.h>
#include <asm/timex.h>
#include <asm/timer.h>
#include <asm/uaccess.h>
#include <asm/irq_regs.h>
......@@ -163,8 +164,6 @@ void __iomem *pcic_regs;
volatile int pcic_speculative;
volatile int pcic_trapped;
static void pci_do_gettimeofday(struct timeval *tv);
static int pci_do_settimeofday(struct timespec *tv);
#define CONFIG_CMD(bus, device_fn, where) (0x80000000 | (((unsigned int)bus) << 16) | (((unsigned int)device_fn) << 8) | (where & ~3))
......@@ -716,19 +715,27 @@ static irqreturn_t pcic_timer_handler (int irq, void *h)
#define USECS_PER_JIFFY 10000 /* We have 100HZ "standard" timer for sparc */
#define TICK_TIMER_LIMIT ((100*1000000/4)/100)
u32 pci_gettimeoffset(void)
{
/*
* We divide all by 100
* to have microsecond resolution and to avoid overflow
*/
unsigned long count =
readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW;
count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100);
return count * 1000;
}
void __init pci_time_init(void)
{
struct linux_pcic *pcic = &pcic0;
unsigned long v;
int timer_irq, irq;
/* A hack until do_gettimeofday prototype is moved to arch specific headers
and btfixupped. Patch do_gettimeofday with ba pci_do_gettimeofday; nop */
((unsigned int *)do_gettimeofday)[0] =
0x10800000 | ((((unsigned long)pci_do_gettimeofday -
(unsigned long)do_gettimeofday) >> 2) & 0x003fffff);
((unsigned int *)do_gettimeofday)[1] = 0x01000000;
BTFIXUPSET_CALL(bus_do_settimeofday, pci_do_settimeofday, BTFIXUPCALL_NORM);
do_arch_gettimeoffset = pci_gettimeoffset;
btfixup();
writel (TICK_TIMER_LIMIT, pcic->pcic_regs+PCI_SYS_LIMIT);
......@@ -746,84 +753,6 @@ void __init pci_time_init(void)
local_irq_enable();
}
static inline unsigned long do_gettimeoffset(void)
{
/*
* We divide all by 100
* to have microsecond resolution and to avoid overflow
*/
unsigned long count =
readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW;
count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100);
return count;
}
static void pci_do_gettimeofday(struct timeval *tv)
{
unsigned long flags;
unsigned long seq;
unsigned long usec, sec;
unsigned long max_ntp_tick = tick_usec - tickadj;
do {
seq = read_seqbegin_irqsave(&xtime_lock, flags);
usec = do_gettimeoffset();
/*
* If time_adjust is negative then NTP is slowing the clock
* so make sure not to go into next possible interval.
* Better to lose some accuracy than have time go backwards..
*/
if (unlikely(time_adjust < 0))
usec = min(usec, max_ntp_tick);
sec = xtime.tv_sec;
usec += (xtime.tv_nsec / 1000);
} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
while (usec >= 1000000) {
usec -= 1000000;
sec++;
}
tv->tv_sec = sec;
tv->tv_usec = usec;
}
static int pci_do_settimeofday(struct timespec *tv)
{
if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
return -EINVAL;
/*
* This is revolting. We need to set "xtime" correctly. However, the
* value in this location is the value at the most recent update of
* wall time. Discover what correction gettimeofday() would have
* made, and then undo it!
*/
tv->tv_nsec -= 1000 * do_gettimeoffset();
while (tv->tv_nsec < 0) {
tv->tv_nsec += NSEC_PER_SEC;
tv->tv_sec--;
}
wall_to_monotonic.tv_sec += xtime.tv_sec - tv->tv_sec;
wall_to_monotonic.tv_nsec += xtime.tv_nsec - tv->tv_nsec;
if (wall_to_monotonic.tv_nsec > NSEC_PER_SEC) {
wall_to_monotonic.tv_nsec -= NSEC_PER_SEC;
wall_to_monotonic.tv_sec++;
}
if (wall_to_monotonic.tv_nsec < 0) {
wall_to_monotonic.tv_nsec += NSEC_PER_SEC;
wall_to_monotonic.tv_sec--;
}
xtime.tv_sec = tv->tv_sec;
xtime.tv_nsec = tv->tv_nsec;
ntp_clear();
return 0;
}
#if 0
static void watchdog_reset() {
......
此差异已折叠。
......@@ -365,6 +365,7 @@ EXPORT_SYMBOL(get_fb_unmapped_area);
void arch_pick_mmap_layout(struct mm_struct *mm)
{
unsigned long random_factor = 0UL;
unsigned long gap;
if (current->flags & PF_RANDOMIZE) {
random_factor = get_random_int();
......@@ -379,9 +380,10 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
* Fall back to the standard layout if the personality
* bit is set, or if the expected stack growth is unlimited:
*/
gap = rlimit(RLIMIT_STACK);
if (!test_thread_flag(TIF_32BIT) ||
(current->personality & ADDR_COMPAT_LAYOUT) ||
current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY ||
gap == RLIM_INFINITY ||
sysctl_legacy_va_layout) {
mm->mmap_base = TASK_UNMAPPED_BASE + random_factor;
mm->get_unmapped_area = arch_get_unmapped_area;
......@@ -389,9 +391,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
} else {
/* We know it's 32-bit */
unsigned long task_size = STACK_TOP32;
unsigned long gap;
gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
if (gap < 128 * 1024 * 1024)
gap = 128 * 1024 * 1024;
if (gap > (task_size / 6 * 5))
......
......@@ -35,6 +35,7 @@
#include <linux/platform_device.h>
#include <asm/oplib.h>
#include <asm/timex.h>
#include <asm/timer.h>
#include <asm/system.h>
#include <asm/irq.h>
......@@ -51,7 +52,6 @@ DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
static int set_rtc_mmss(unsigned long);
static int sbus_do_settimeofday(struct timespec *tv);
unsigned long profile_pc(struct pt_regs *regs)
{
......@@ -76,6 +76,8 @@ EXPORT_SYMBOL(profile_pc);
__volatile__ unsigned int *master_l10_counter;
u32 (*do_arch_gettimeoffset)(void);
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
......@@ -196,35 +198,14 @@ static int __init clock_init(void)
{
return of_register_driver(&clock_driver, &of_platform_bus_type);
}
/* Must be after subsys_initcall() so that busses are probed. Must
* be before device_initcall() because things like the RTC driver
* need to see the clock registers.
*/
fs_initcall(clock_init);
static void __init sbus_time_init(void)
{
BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM);
btfixup();
sparc_init_timers(timer_interrupt);
}
void __init time_init(void)
{
#ifdef CONFIG_PCI
extern void pci_time_init(void);
if (pcic_present()) {
pci_time_init();
return;
}
#endif
sbus_time_init();
}
static inline unsigned long do_gettimeoffset(void)
u32 sbus_do_gettimeoffset(void)
{
unsigned long val = *master_l10_counter;
unsigned long usec = (val >> 10) & 0x1fffff;
......@@ -233,86 +214,39 @@ static inline unsigned long do_gettimeoffset(void)
if (val & 0x80000000)
usec += 1000000 / HZ;
return usec;
return usec * 1000;
}
/* Ok, my cute asm atomicity trick doesn't work anymore.
* There are just too many variables that need to be protected
* now (both members of xtime, et al.)
*/
void do_gettimeofday(struct timeval *tv)
{
unsigned long flags;
unsigned long seq;
unsigned long usec, sec;
unsigned long max_ntp_tick = tick_usec - tickadj;
do {
seq = read_seqbegin_irqsave(&xtime_lock, flags);
usec = do_gettimeoffset();
/*
* If time_adjust is negative then NTP is slowing the clock
* so make sure not to go into next possible interval.
* Better to lose some accuracy than have time go backwards..
*/
if (unlikely(time_adjust < 0))
usec = min(usec, max_ntp_tick);
sec = xtime.tv_sec;
usec += (xtime.tv_nsec / 1000);
} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
while (usec >= 1000000) {
usec -= 1000000;
sec++;
}
tv->tv_sec = sec;
tv->tv_usec = usec;
}
EXPORT_SYMBOL(do_gettimeofday);
int do_settimeofday(struct timespec *tv)
u32 arch_gettimeoffset(void)
{
int ret;
write_seqlock_irq(&xtime_lock);
ret = bus_do_settimeofday(tv);
write_sequnlock_irq(&xtime_lock);
clock_was_set();
return ret;
if (unlikely(!do_arch_gettimeoffset))
return 0;
return do_arch_gettimeoffset();
}
EXPORT_SYMBOL(do_settimeofday);
static int sbus_do_settimeofday(struct timespec *tv)
static void __init sbus_time_init(void)
{
time_t wtm_sec, sec = tv->tv_sec;
long wtm_nsec, nsec = tv->tv_nsec;
do_arch_gettimeoffset = sbus_do_gettimeoffset;
if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
return -EINVAL;
/*
* This is revolting. We need to set "xtime" correctly. However, the
* value in this location is the value at the most recent update of
* wall time. Discover what correction gettimeofday() would have
* made, and then undo it!
*/
nsec -= 1000 * do_gettimeoffset();
wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
btfixup();
set_normalized_timespec(&xtime, sec, nsec);
set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
sparc_init_timers(timer_interrupt);
}
ntp_clear();
return 0;
void __init time_init(void)
{
#ifdef CONFIG_PCI
extern void pci_time_init(void);
if (pcic_present()) {
pci_time_init();
return;
}
#endif
sbus_time_init();
}
static int set_rtc_mmss(unsigned long secs)
{
struct rtc_device *rtc = rtc_class_open("rtc0");
......
......@@ -18,6 +18,7 @@
#include <linux/signal.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/perf_event.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/kdebug.h>
......@@ -203,6 +204,8 @@ asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write,
if (in_atomic() || !mm)
goto no_context;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
down_read(&mm->mmap_sem);
/*
......@@ -249,10 +252,15 @@ asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write,
goto do_sigbus;
BUG();
}
if (fault & VM_FAULT_MAJOR)
if (fault & VM_FAULT_MAJOR) {
current->maj_flt++;
else
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
regs, address);
} else {
current->min_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
regs, address);
}
up_read(&mm->mmap_sem);
return;
......
......@@ -16,6 +16,7 @@
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/perf_event.h>
#include <linux/interrupt.h>
#include <linux/kprobes.h>
#include <linux/kdebug.h>
......@@ -296,6 +297,8 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs)
if (in_atomic() || !mm)
goto intr_or_no_mm;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
if (!down_read_trylock(&mm->mmap_sem)) {
if ((regs->tstate & TSTATE_PRIV) &&
!search_exception_tables(regs->tpc)) {
......@@ -400,11 +403,15 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs)
goto do_sigbus;
BUG();
}
if (fault & VM_FAULT_MAJOR)
if (fault & VM_FAULT_MAJOR) {
current->maj_flt++;
else
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
regs, address);
} else {
current->min_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
regs, address);
}
up_read(&mm->mmap_sem);
mm_rss = get_mm_rss(mm);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册