drm/i915: Idle unused rings on gen2/3 during init/resume

gen2/3 platforms have a boatload of rings we're not using. On my 830
the BIOS/hw can leave some of those "active" after resume which will
prevent c3 entry. The ring is apparently considered active whenever
head != tail even if the ring is disabled.

Disable and clear all such unused ringbuffers on init/resume.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_gem.c

@@ -4663,11 +4663,46 @@ intel_enable_blt(struct drm_device *dev)
 	return true;
 }
 
+static void init_unused_ring(struct drm_device *dev, u32 base)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	I915_WRITE(RING_CTL(base), 0);
+	I915_WRITE(RING_HEAD(base), 0);
+	I915_WRITE(RING_TAIL(base), 0);
+	I915_WRITE(RING_START(base), 0);
+}
+
+static void init_unused_rings(struct drm_device *dev)
+{
+	if (IS_I830(dev)) {
+		init_unused_ring(dev, PRB1_BASE);
+		init_unused_ring(dev, SRB0_BASE);
+		init_unused_ring(dev, SRB1_BASE);
+		init_unused_ring(dev, SRB2_BASE);
+		init_unused_ring(dev, SRB3_BASE);
+	} else if (IS_GEN2(dev)) {
+		init_unused_ring(dev, SRB0_BASE);
+		init_unused_ring(dev, SRB1_BASE);
+	} else if (IS_GEN3(dev)) {
+		init_unused_ring(dev, PRB1_BASE);
+		init_unused_ring(dev, PRB2_BASE);
+	}
+}
+
 int i915_gem_init_rings(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int ret;
 
+	/*
+	 * At least 830 can leave some of the unused rings
+	 * "active" (ie. head != tail) after resume which
+	 * will prevent c3 entry. Makes sure all unused rings
+	 * are totally idle.
+	 */
+	init_unused_rings(dev);
+
 	ret = intel_init_render_ring_buffer(dev);
 	if (ret)
 		return ret;

drivers/gpu/drm/i915/i915_reg.h

@@ -1026,6 +1026,13 @@ enum punit_power_well {
 #define   PGTBL_ADDRESS_LO_MASK	0xfffff000 /* bits [31:12] */
 #define   PGTBL_ADDRESS_HI_MASK	0x000000f0 /* bits [35:32] (gen4) */
 #define PGTBL_ER	0x02024
+#define PRB0_BASE (0x2030-0x30)
+#define PRB1_BASE (0x2040-0x30) /* 830,gen3 */
+#define PRB2_BASE (0x2050-0x30) /* gen3 */
+#define SRB0_BASE (0x2100-0x30) /* gen2 */
+#define SRB1_BASE (0x2110-0x30) /* gen2 */
+#define SRB2_BASE (0x2120-0x30) /* 830 */
+#define SRB3_BASE (0x2130-0x30) /* 830 */
 #define RENDER_RING_BASE	0x02000
 #define BSD_RING_BASE		0x04000
 #define GEN6_BSD_RING_BASE	0x12000