提交 81a63001 编写于 作者: R Russell King

Merge branch 'devel-stable' into for-linus

......@@ -23,10 +23,8 @@ struct mod_arch_specific {
struct unwind_table *unwind[ARM_SEC_MAX];
#endif
#ifdef CONFIG_ARM_MODULE_PLTS
struct elf32_shdr *core_plt;
struct elf32_shdr *init_plt;
int core_plt_count;
int init_plt_count;
struct elf32_shdr *plt;
int plt_count;
#endif
};
......
......@@ -9,6 +9,7 @@
#include <linux/elf.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sort.h>
#include <asm/cache.h>
#include <asm/opcodes.h>
......@@ -30,154 +31,198 @@ struct plt_entries {
u32 lit[PLT_ENT_COUNT];
};
static bool in_init(const struct module *mod, u32 addr)
u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
{
return addr - (u32)mod->init_layout.base < mod->init_layout.size;
struct plt_entries *plt = (struct plt_entries *)mod->arch.plt->sh_addr;
int idx = 0;
/*
* Look for an existing entry pointing to 'val'. Given that the
* relocations are sorted, this will be the last entry we allocated.
* (if one exists).
*/
if (mod->arch.plt_count > 0) {
plt += (mod->arch.plt_count - 1) / PLT_ENT_COUNT;
idx = (mod->arch.plt_count - 1) % PLT_ENT_COUNT;
if (plt->lit[idx] == val)
return (u32)&plt->ldr[idx];
idx = (idx + 1) % PLT_ENT_COUNT;
if (!idx)
plt++;
}
mod->arch.plt_count++;
BUG_ON(mod->arch.plt_count * PLT_ENT_SIZE > mod->arch.plt->sh_size);
if (!idx)
/* Populate a new set of entries */
*plt = (struct plt_entries){
{ [0 ... PLT_ENT_COUNT - 1] = PLT_ENT_LDR, },
{ val, }
};
else
plt->lit[idx] = val;
return (u32)&plt->ldr[idx];
}
u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
#define cmp_3way(a,b) ((a) < (b) ? -1 : (a) > (b))
static int cmp_rel(const void *a, const void *b)
{
struct plt_entries *plt, *plt_end;
int c, *count;
if (in_init(mod, loc)) {
plt = (void *)mod->arch.init_plt->sh_addr;
plt_end = (void *)plt + mod->arch.init_plt->sh_size;
count = &mod->arch.init_plt_count;
} else {
plt = (void *)mod->arch.core_plt->sh_addr;
plt_end = (void *)plt + mod->arch.core_plt->sh_size;
count = &mod->arch.core_plt_count;
}
const Elf32_Rel *x = a, *y = b;
int i;
/* Look for an existing entry pointing to 'val' */
for (c = *count; plt < plt_end; c -= PLT_ENT_COUNT, plt++) {
int i;
if (!c) {
/* Populate a new set of entries */
*plt = (struct plt_entries){
{ [0 ... PLT_ENT_COUNT - 1] = PLT_ENT_LDR, },
{ val, }
};
++*count;
return (u32)plt->ldr;
}
for (i = 0; i < PLT_ENT_COUNT; i++) {
if (!plt->lit[i]) {
plt->lit[i] = val;
++*count;
}
if (plt->lit[i] == val)
return (u32)&plt->ldr[i];
}
/* sort by type and symbol index */
i = cmp_3way(ELF32_R_TYPE(x->r_info), ELF32_R_TYPE(y->r_info));
if (i == 0)
i = cmp_3way(ELF32_R_SYM(x->r_info), ELF32_R_SYM(y->r_info));
return i;
}
static bool is_zero_addend_relocation(Elf32_Addr base, const Elf32_Rel *rel)
{
u32 *tval = (u32 *)(base + rel->r_offset);
/*
* Do a bitwise compare on the raw addend rather than fully decoding
* the offset and doing an arithmetic comparison.
* Note that a zero-addend jump/call relocation is encoded taking the
* PC bias into account, i.e., -8 for ARM and -4 for Thumb2.
*/
switch (ELF32_R_TYPE(rel->r_info)) {
u16 upper, lower;
case R_ARM_THM_CALL:
case R_ARM_THM_JUMP24:
upper = __mem_to_opcode_thumb16(((u16 *)tval)[0]);
lower = __mem_to_opcode_thumb16(((u16 *)tval)[1]);
return (upper & 0x7ff) == 0x7ff && (lower & 0x2fff) == 0x2ffe;
case R_ARM_CALL:
case R_ARM_PC24:
case R_ARM_JUMP24:
return (__mem_to_opcode_arm(*tval) & 0xffffff) == 0xfffffe;
}
BUG();
}
static int duplicate_rel(Elf32_Addr base, const Elf32_Rel *rel, int num,
u32 mask)
static bool duplicate_rel(Elf32_Addr base, const Elf32_Rel *rel, int num)
{
u32 *loc1, *loc2;
int i;
const Elf32_Rel *prev;
for (i = 0; i < num; i++) {
if (rel[i].r_info != rel[num].r_info)
continue;
/*
* Entries are sorted by type and symbol index. That means that,
* if a duplicate entry exists, it must be in the preceding
* slot.
*/
if (!num)
return false;
/*
* Identical relocation types against identical symbols can
* still result in different PLT entries if the addend in the
* place is different. So resolve the target of the relocation
* to compare the values.
*/
loc1 = (u32 *)(base + rel[i].r_offset);
loc2 = (u32 *)(base + rel[num].r_offset);
if (((*loc1 ^ *loc2) & mask) == 0)
return 1;
}
return 0;
prev = rel + num - 1;
return cmp_rel(rel + num, prev) == 0 &&
is_zero_addend_relocation(base, prev);
}
/* Count how many PLT entries we may need */
static unsigned int count_plts(Elf32_Addr base, const Elf32_Rel *rel, int num)
static unsigned int count_plts(const Elf32_Sym *syms, Elf32_Addr base,
const Elf32_Rel *rel, int num)
{
unsigned int ret = 0;
const Elf32_Sym *s;
int i;
/*
* Sure, this is order(n^2), but it's usually short, and not
* time critical
*/
for (i = 0; i < num; i++)
for (i = 0; i < num; i++) {
switch (ELF32_R_TYPE(rel[i].r_info)) {
case R_ARM_CALL:
case R_ARM_PC24:
case R_ARM_JUMP24:
if (!duplicate_rel(base, rel, i,
__opcode_to_mem_arm(0x00ffffff)))
ret++;
break;
#ifdef CONFIG_THUMB2_KERNEL
case R_ARM_THM_CALL:
case R_ARM_THM_JUMP24:
if (!duplicate_rel(base, rel, i,
__opcode_to_mem_thumb32(0x07ff2fff)))
/*
* We only have to consider branch targets that resolve
* to undefined symbols. This is not simply a heuristic,
* it is a fundamental limitation, since the PLT itself
* is part of the module, and needs to be within range
* as well, so modules can never grow beyond that limit.
*/
s = syms + ELF32_R_SYM(rel[i].r_info);
if (s->st_shndx != SHN_UNDEF)
break;
/*
* Jump relocations with non-zero addends against
* undefined symbols are supported by the ELF spec, but
* do not occur in practice (e.g., 'jump n bytes past
* the entry point of undefined function symbol f').
* So we need to support them, but there is no need to
* take them into consideration when trying to optimize
* this code. So let's only check for duplicates when
* the addend is zero.
*/
if (!is_zero_addend_relocation(base, rel + i) ||
!duplicate_rel(base, rel, i))
ret++;
#endif
}
}
return ret;
}
int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
char *secstrings, struct module *mod)
{
unsigned long core_plts = 0, init_plts = 0;
unsigned long plts = 0;
Elf32_Shdr *s, *sechdrs_end = sechdrs + ehdr->e_shnum;
Elf32_Sym *syms = NULL;
/*
* To store the PLTs, we expand the .text section for core module code
* and the .init.text section for initialization code.
* and for initialization code.
*/
for (s = sechdrs; s < sechdrs_end; ++s)
if (strcmp(".core.plt", secstrings + s->sh_name) == 0)
mod->arch.core_plt = s;
else if (strcmp(".init.plt", secstrings + s->sh_name) == 0)
mod->arch.init_plt = s;
if (!mod->arch.core_plt || !mod->arch.init_plt) {
pr_err("%s: sections missing\n", mod->name);
for (s = sechdrs; s < sechdrs_end; ++s) {
if (strcmp(".plt", secstrings + s->sh_name) == 0)
mod->arch.plt = s;
else if (s->sh_type == SHT_SYMTAB)
syms = (Elf32_Sym *)s->sh_addr;
}
if (!mod->arch.plt) {
pr_err("%s: module PLT section missing\n", mod->name);
return -ENOEXEC;
}
if (!syms) {
pr_err("%s: module symtab section missing\n", mod->name);
return -ENOEXEC;
}
for (s = sechdrs + 1; s < sechdrs_end; ++s) {
const Elf32_Rel *rels = (void *)ehdr + s->sh_offset;
Elf32_Rel *rels = (void *)ehdr + s->sh_offset;
int numrels = s->sh_size / sizeof(Elf32_Rel);
Elf32_Shdr *dstsec = sechdrs + s->sh_info;
if (s->sh_type != SHT_REL)
continue;
if (strstr(secstrings + s->sh_name, ".init"))
init_plts += count_plts(dstsec->sh_addr, rels, numrels);
else
core_plts += count_plts(dstsec->sh_addr, rels, numrels);
/* ignore relocations that operate on non-exec sections */
if (!(dstsec->sh_flags & SHF_EXECINSTR))
continue;
/* sort by type and symbol index */
sort(rels, numrels, sizeof(Elf32_Rel), cmp_rel, NULL);
plts += count_plts(syms, dstsec->sh_addr, rels, numrels);
}
mod->arch.core_plt->sh_type = SHT_NOBITS;
mod->arch.core_plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
mod->arch.core_plt->sh_addralign = L1_CACHE_BYTES;
mod->arch.core_plt->sh_size = round_up(core_plts * PLT_ENT_SIZE,
sizeof(struct plt_entries));
mod->arch.core_plt_count = 0;
mod->arch.init_plt->sh_type = SHT_NOBITS;
mod->arch.init_plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
mod->arch.init_plt->sh_addralign = L1_CACHE_BYTES;
mod->arch.init_plt->sh_size = round_up(init_plts * PLT_ENT_SIZE,
sizeof(struct plt_entries));
mod->arch.init_plt_count = 0;
pr_debug("%s: core.plt=%x, init.plt=%x\n", __func__,
mod->arch.core_plt->sh_size, mod->arch.init_plt->sh_size);
mod->arch.plt->sh_type = SHT_NOBITS;
mod->arch.plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
mod->arch.plt->sh_addralign = L1_CACHE_BYTES;
mod->arch.plt->sh_size = round_up(plts * PLT_ENT_SIZE,
sizeof(struct plt_entries));
mod->arch.plt_count = 0;
pr_debug("%s: plt=%x\n", __func__, mod->arch.plt->sh_size);
return 0;
}
SECTIONS {
.core.plt : { BYTE(0) }
.init.plt : { BYTE(0) }
.plt : { BYTE(0) }
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册