Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 8087ebd5 编写于 作者: P Paul Mackerras
浏览文件
操作

Merge branch 'for-2.6.24' of... 

Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.24
上级 895532a1 4d9e5510
隐藏空白更改
内联 并排
Showing with 259 addition and 334 deletion
arch/powerpc/Kconfig
浏览文件 @ 8087ebd5
......@@ -599,7 +599,8 @@ config TASK_SIZE_BOOL
config TASK_SIZE
hex "Size of user task space" if TASK_SIZE_BOOL
default "0x80000000"
default "0x80000000" if PPC_PREP || PPC_8xx
default "0xc0000000"
config CONSISTENT_START_BOOL
bool "Set custom consistent memory pool address"
......
arch/powerpc/boot/dts/mpc8272ads.dts
浏览文件 @ 8087ebd5
......@@ -121,7 +121,7 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
reg = <119c0 30 0 2000>;
reg = <119c0 30>;
ranges;
muram@0 {
......
arch/powerpc/boot/dts/mpc8541cds.dts
浏览文件 @ 8087ebd5
......@@ -145,6 +145,42 @@
device_type = "open-pic";
big-endian;
};
cpm@919c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8541-cpm", "fsl,cpm2";
reg = <919c0 30>;
ranges;
muram@80000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 80000 10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0 2000 9000 1000>;
};
};
brg@919f0 {
compatible = "fsl,mpc8541-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
reg = <919f0 10 915f0 10>;
};
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <2e 2>;
interrupt-parent = <&mpic>;
reg = <90c00 80>;
compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
};
};
};
pci1: pci@e0008000 {
......
arch/powerpc/boot/dts/mpc8555cds.dts
浏览文件 @ 8087ebd5
......@@ -145,6 +145,42 @@
device_type = "open-pic";
big-endian;
};
cpm@919c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
reg = <919c0 30>;
ranges;
muram@80000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 80000 10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0 2000 9000 1000>;
};
};
brg@919f0 {
compatible = "fsl,mpc8555-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
reg = <919f0 10 915f0 10>;
};
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <2e 2>;
interrupt-parent = <&mpic>;
reg = <90c00 80>;
compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
};
};
};
pci1: pci@e0008000 {
......
arch/powerpc/boot/dts/mpc8560ads.dts
浏览文件 @ 8087ebd5
......@@ -138,15 +138,31 @@
device_type = "open-pic";
};
cpm@e0000000 {
cpm@919c0 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "cpm";
model = "CPM2";
ranges = <0 0 c0000>;
reg = <80000 40000>;
command-proc = <919c0>;
brg-frequency = <9d5b340>;
compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
reg = <919c0 30>;
ranges;
muram@80000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 80000 10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0 4000 9000 2000>;
};
};
brg@919f0 {
compatible = "fsl,mpc8560-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
reg = <919f0 10 915f0 10>;
clock-frequency = <d#165000000>;
};
cpmpic: pic@90c00 {
interrupt-controller;
......@@ -155,43 +171,38 @@
interrupts = <2e 2>;
interrupt-parent = <&mpic>;
reg = <90c00 80>;
device_type = "cpm-pic";
compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
};
scc@91a00 {
serial@91a00 {
device_type = "serial";
compatible = "cpm_uart";
model = "SCC";
device-id = <1>;
compatible = "fsl,mpc8560-scc-uart",
"fsl,cpm2-scc-uart";
reg = <91a00 20 88000 100>;
clock-setup = <00ffffff 0>;
rx-clock = <1>;
tx-clock = <1>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <00800000>;
current-speed = <1c200>;
interrupts = <28 8>;
interrupt-parent = <&cpmpic>;
};
scc@91a20 {
serial@91a20 {
device_type = "serial";
compatible = "cpm_uart";
model = "SCC";
device-id = <2>;
compatible = "fsl,mpc8560-scc-uart",
"fsl,cpm2-scc-uart";
reg = <91a20 20 88100 100>;
clock-setup = <ff00ffff 90000>;
rx-clock = <2>;
tx-clock = <2>;
fsl,cpm-brg = <2>;
fsl,cpm-command = <04a00000>;
current-speed = <1c200>;
interrupts = <29 8>;
interrupt-parent = <&cpmpic>;
};
fcc@91320 {
ethernet@91320 {
device_type = "network";
compatible = "fs_enet";
model = "FCC";
device-id = <2>;
reg = <91320 20 88500 100 913a0 30>;
compatible = "fsl,mpc8560-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <91320 20 88500 100 913b0 1>;
/*
* mac-address is deprecated and will be removed
* in 2.6.25. Only recent versions of
......@@ -199,20 +210,17 @@
*/
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
clock-setup = <ff00ffff 250000>;
rx-clock = <15>;
tx-clock = <16>;
fsl,cpm-command = <16200300>;
interrupts = <21 8>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy2>;
};
fcc@91340 {
ethernet@91340 {
device_type = "network";
compatible = "fs_enet";
model = "FCC";
device-id = <3>;
reg = <91340 20 88600 100 913d0 30>;
compatible = "fsl,mpc8560-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <91340 20 88600 100 913d0 1>;
/*
* mac-address is deprecated and will be removed
* in 2.6.25. Only recent versions of
......@@ -220,9 +228,7 @@
*/
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
clock-setup = <ffff00ff 3700>;
rx-clock = <17>;
tx-clock = <18>;
fsl,cpm-command = <1a400300>;
interrupts = <22 8>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy3>;
......
arch/powerpc/configs/mpc8560_ads_defconfig
浏览文件 @ 8087ebd5
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.23-rc4
# Tue Aug 28 21:24:43 2007
# Linux kernel version: 2.6.23-rc9
# Thu Oct 11 09:16:32 2007
#
# CONFIG_PPC64 is not set
......@@ -22,8 +22,13 @@ CONFIG_FSL_BOOKE=y
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
......@@ -86,7 +91,6 @@ CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
......@@ -128,7 +132,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_MPC8560_ADS=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8544_DS is not set
# CONFIG_MPC85xx_DS is not set
CONFIG_MPC8560=y
CONFIG_MPC85xx=y
CONFIG_MPIC=y
......@@ -142,12 +146,17 @@ CONFIG_MPIC=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_CPM2=y
CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
......@@ -158,7 +167,7 @@ CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MATH_EMULATION=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
......@@ -177,6 +186,8 @@ CONFIG_VIRT_TO_BUS=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
CONFIG_WANT_DEVICE_TREE=y
CONFIG_DEVICE_TREE=""
......@@ -415,6 +426,7 @@ CONFIG_E1000_NAPI=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
......@@ -807,3 +819,4 @@ CONFIG_FORCED_INLINING=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
arch/powerpc/kernel/head_32.S
浏览文件 @ 8087ebd5
......@@ -469,12 +469,12 @@ InstructionTLBMiss:
mfctr r0
/* Get PTE (linux-style) and check access */
mfspr r3,SPRN_IMISS
lis r1,KERNELBASE@h /* check if kernel address */
cmplw 0,r3,r1
lis r1,PAGE_OFFSET@h /* check if kernel address */
cmplw 0,r1,r3
mfspr r2,SPRN_SPRG3
li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
lwz r2,PGDIR(r2)
blt+ 112f
bge- 112f
mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
lis r2,swapper_pg_dir@ha /* if kernel address, use */
......@@ -543,12 +543,12 @@ DataLoadTLBMiss:
mfctr r0
/* Get PTE (linux-style) and check access */
mfspr r3,SPRN_DMISS
lis r1,KERNELBASE@h /* check if kernel address */
cmplw 0,r3,r1
lis r1,PAGE_OFFSET@h /* check if kernel address */
cmplw 0,r1,r3
mfspr r2,SPRN_SPRG3
li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
lwz r2,PGDIR(r2)
blt+ 112f
bge- 112f
mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
lis r2,swapper_pg_dir@ha /* if kernel address, use */
......@@ -615,12 +615,12 @@ DataStoreTLBMiss:
mfctr r0
/* Get PTE (linux-style) and check access */
mfspr r3,SPRN_DMISS
lis r1,KERNELBASE@h /* check if kernel address */
cmplw 0,r3,r1
lis r1,PAGE_OFFSET@h /* check if kernel address */
cmplw 0,r1,r3
mfspr r2,SPRN_SPRG3
li r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
lwz r2,PGDIR(r2)
blt+ 112f
bge- 112f
mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
lis r2,swapper_pg_dir@ha /* if kernel address, use */
......
arch/powerpc/kernel/head_40x.S
浏览文件 @ 8087ebd5
......@@ -289,7 +289,7 @@ label:
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
lis r11, TASK_SIZE@h
lis r11, PAGE_OFFSET@h
cmplw r10, r11
blt+ 3f
lis r11, swapper_pg_dir@h
......@@ -481,7 +481,7 @@ label:
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
lis r11, TASK_SIZE@h
lis r11, PAGE_OFFSET@h
cmplw r10, r11
blt+ 3f
lis r11, swapper_pg_dir@h
......@@ -581,7 +581,7 @@ label:
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
lis r11, TASK_SIZE@h
lis r11, PAGE_OFFSET@h
cmplw r10, r11
blt+ 3f
lis r11, swapper_pg_dir@h
......
arch/powerpc/kernel/head_44x.S
浏览文件 @ 8087ebd5
......@@ -319,7 +319,7 @@ interrupt_base:
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
lis r11, TASK_SIZE@h
lis r11, PAGE_OFFSET@h
cmplw r10, r11
blt+ 3f
lis r11, swapper_pg_dir@h
......@@ -458,7 +458,7 @@ interrupt_base:
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
lis r11, TASK_SIZE@h
lis r11, PAGE_OFFSET@h
cmplw r10, r11
blt+ 3f
lis r11, swapper_pg_dir@h
......@@ -528,7 +528,7 @@ interrupt_base:
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
lis r11, TASK_SIZE@h
lis r11, PAGE_OFFSET@h
cmplw r10, r11
blt+ 3f
lis r11, swapper_pg_dir@h
......
arch/powerpc/kernel/head_fsl_booke.S
浏览文件 @ 8087ebd5
......@@ -461,8 +461,7 @@ interrupt_base:
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
lis r11, TASK_SIZE@h
ori r11, r11, TASK_SIZE@l
lis r11, PAGE_OFFSET@h
cmplw 0, r10, r11
bge 2f
......@@ -584,8 +583,7 @@ interrupt_base:
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
lis r11, TASK_SIZE@h
ori r11, r11, TASK_SIZE@l
lis r11, PAGE_OFFSET@h
cmplw 5, r10, r11
blt 5, 3f
lis r11, swapper_pg_dir@h
......@@ -645,8 +643,7 @@ interrupt_base:
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
lis r11, TASK_SIZE@h
ori r11, r11, TASK_SIZE@l
lis r11, PAGE_OFFSET@h
cmplw 5, r10, r11
blt 5, 3f
lis r11, swapper_pg_dir@h
......@@ -744,7 +741,7 @@ data_access:
* r10 - EA of fault
* r11 - TLB (info from Linux PTE)
* r12, r13 - available to use
* CR5 - results of addr < TASK_SIZE
* CR5 - results of addr >= PAGE_OFFSET
* MAS0, MAS1 - loaded with proper value when we get here
* MAS2, MAS3 - will need additional info from Linux PTE
* Upon exit, we reload everything and RFI.
......
arch/powerpc/platforms/85xx/Kconfig
浏览文件 @ 8087ebd5
......@@ -12,6 +12,7 @@ config MPC8540_ADS
config MPC8560_ADS
bool "Freescale MPC8560 ADS"
select DEFAULT_UIMAGE
select PPC_CPM_NEW_BINDING
help
This option enables support for the MPC 8560 ADS board
......
arch/powerpc/platforms/85xx/mpc8540_ads.h 已删除 100644 → 0
浏览文件 @ 895532a1
/*
* arch/powerpc/platforms/85xx/mpc8540_ads.h
*
* MPC8540ADS board definitions
*
* Maintainer: Kumar Gala <kumar.gala@freescale.com>
*
* Copyright 2004 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __MACH_MPC8540ADS_H__
#define __MACH_MPC8540ADS_H__
#include <linux/initrd.h>
#define BOARD_CCSRBAR ((uint)0xe0000000)
#define BCSR_ADDR ((uint)0xf8000000)
#define BCSR_SIZE ((uint)(32 * 1024))
/* PCI interrupt controller */
#define PIRQA MPC85xx_IRQ_EXT1
#define PIRQB MPC85xx_IRQ_EXT2
#define PIRQC MPC85xx_IRQ_EXT3
#define PIRQD MPC85xx_IRQ_EXT4
/* Offset of CPM register space */
#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET)
#endif /* __MACH_MPC8540ADS_H__ */
arch/powerpc/platforms/85xx/mpc85xx_ads.c
浏览文件 @ 8087ebd5
......@@ -17,13 +17,12 @@
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/of_platform.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/mpc85xx.h>
#include <asm/prom.h>
#include <asm/mpic.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
......@@ -32,10 +31,8 @@
#include <sysdev/fsl_pci.h>
#ifdef CONFIG_CPM2
#include <linux/fs_enet_pd.h>
#include <asm/cpm2.h>
#include <sysdev/cpm2_pic.h>
#include <asm/fs_pd.h>
#endif
#ifdef CONFIG_PCI
......@@ -95,10 +92,10 @@ static void __init mpc85xx_ads_pic_init(void)
#ifdef CONFIG_CPM2
/* Setup CPM2 PIC */
np = of_find_node_by_type(NULL, "cpm-pic");
np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
if (np == NULL) {
printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
return;
printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
return;
}
irq = irq_of_parse_and_map(np, 0);
......@@ -111,81 +108,75 @@ static void __init mpc85xx_ads_pic_init(void)
* Setup the architecture
*/
#ifdef CONFIG_CPM2
void init_fcc_ioports(struct fs_platform_info *fpi)
struct cpm_pin {
int port, pin, flags;
};
static struct cpm_pin mpc8560_ads_pins[] = {
/* SCC1 */
{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
/* SCC2 */
{3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
/* FCC2 */
{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
/* FCC3 */
{1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
{2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
};
static void __init init_ioports(void)
{
struct io_port *io = cpm2_map(im_ioport);
int fcc_no = fs_get_fcc_index(fpi->fs_no);
int target;
u32 tempval;
switch(fcc_no) {
case 1:
tempval = in_be32(&io->iop_pdirb);
tempval &= ~PB2_DIRB0;
tempval |= PB2_DIRB1;
out_be32(&io->iop_pdirb, tempval);
tempval = in_be32(&io->iop_psorb);
tempval &= ~PB2_PSORB0;
tempval |= PB2_PSORB1;
out_be32(&io->iop_psorb, tempval);
tempval = in_be32(&io->iop_pparb);
tempval |= (PB2_DIRB0 | PB2_DIRB1);
out_be32(&io->iop_pparb, tempval);
target = CPM_CLK_FCC2;
break;
case 2:
tempval = in_be32(&io->iop_pdirb);
tempval &= ~PB3_DIRB0;
tempval |= PB3_DIRB1;
out_be32(&io->iop_pdirb, tempval);
tempval = in_be32(&io->iop_psorb);
tempval &= ~PB3_PSORB0;
tempval |= PB3_PSORB1;
out_be32(&io->iop_psorb, tempval);
tempval = in_be32(&io->iop_pparb);
tempval |= (PB3_DIRB0 | PB3_DIRB1);
out_be32(&io->iop_pparb, tempval);
tempval = in_be32(&io->iop_pdirc);
tempval |= PC3_DIRC1;
out_be32(&io->iop_pdirc, tempval);
tempval = in_be32(&io->iop_pparc);
tempval |= PC3_DIRC1;
out_be32(&io->iop_pparc, tempval);
target = CPM_CLK_FCC3;
break;
default:
printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n");
return;
int i;
for (i = 0; i < ARRAY_SIZE(mpc8560_ads_pins); i++) {
struct cpm_pin *pin = &mpc8560_ads_pins[i];
cpm2_set_pin(pin->port, pin->pin, pin->flags);
}
/* Port C has clocks...... */
tempval = in_be32(&io->iop_psorc);
tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
out_be32(&io->iop_psorc, tempval);
tempval = in_be32(&io->iop_pdirc);
tempval &= ~(PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
out_be32(&io->iop_pdirc, tempval);
tempval = in_be32(&io->iop_pparc);
tempval |= (PC_CLK(fpi->clk_rx - 8) | PC_CLK(fpi->clk_tx - 8));
out_be32(&io->iop_pparc, tempval);
cpm2_unmap(io);
/* Configure Serial Interface clock routing.
* First, clear FCC bits to zero,
* then set the ones we want.
*/
cpm2_clk_setup(target, fpi->clk_rx, CPM_CLK_RX);
cpm2_clk_setup(target, fpi->clk_tx, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
}
#endif
......@@ -200,6 +191,7 @@ static void __init mpc85xx_ads_setup_arch(void)
#ifdef CONFIG_CPM2
cpm2_reset();
init_ioports();
#endif
#ifdef CONFIG_PCI
......@@ -231,6 +223,24 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
}
static struct of_device_id __initdata of_bus_ids[] = {
{ .name = "soc", },
{ .type = "soc", },
{ .name = "cpm", },
{ .name = "localbus", },
{},
};
static int __init declare_of_platform_devices(void)
{
if (!machine_is(mpc85xx_ads))
return 0;
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
device_initcall(declare_of_platform_devices);
/*
* Called very early, device-tree isn't unflattened
*/
......
arch/powerpc/platforms/85xx/mpc85xx_ads.h 已删除 100644 → 0
浏览文件 @ 895532a1
/*
* MPC85xx ADS board definitions
*
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2004 Freescale Semiconductor Inc.
*
* 2006 (c) MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __MACH_MPC85XXADS_H
#define __MACH_MPC85XXADS_H
#include <linux/initrd.h>
#include <sysdev/fsl_soc.h>
#define BCSR_ADDR ((uint)0xf8000000)
#define BCSR_SIZE ((uint)(32 * 1024))
#ifdef CONFIG_CPM2
#define MPC85xx_CPM_OFFSET (0x80000)
#define CPM_MAP_ADDR (get_immrbase() + MPC85xx_CPM_OFFSET)
#define CPM_IRQ_OFFSET 60
#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET)
#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET)
#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET)
#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET)
#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET)
#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET)
/* FCC1 Clock Source Configuration. These can be
* redefined in the board specific file.
* Can only choose from CLK9-12 */
#define F1_RXCLK 12
#define F1_TXCLK 11
/* FCC2 Clock Source Configuration. These can be
* redefined in the board specific file.
* Can only choose from CLK13-16 */
#define F2_RXCLK 13
#define F2_TXCLK 14
/* FCC3 Clock Source Configuration. These can be
* redefined in the board specific file.
* Can only choose from CLK13-16 */
#define F3_RXCLK 15
#define F3_TXCLK 16
#endif /* CONFIG_CPM2 */
#endif /* __MACH_MPC85XXADS_H */
arch/powerpc/platforms/85xx/mpc85xx_cds.c
浏览文件 @ 8087ebd5
......@@ -36,7 +36,6 @@
#include <asm/machdep.h>
#include <asm/ipic.h>
#include <asm/pci-bridge.h>
#include <asm/mpc85xx.h>
#include <asm/irq.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
......@@ -47,6 +46,15 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
/* CADMUS info */
/* xxx - galak, move into device tree */
#define CADMUS_BASE (0xf8004000)
#define CADMUS_SIZE (256)
#define CM_VER (0)
#define CM_CSR (1)
#define CM_RST (2)
static int cds_pci_slot = 2;
static volatile u8 *cadmus;
......
arch/powerpc/platforms/85xx/mpc85xx_cds.h 已删除 100644 → 0
浏览文件 @ 895532a1
/*
* arch/powerpc/platforms/85xx/mpc85xx_cds.h
*
* MPC85xx CDS board definitions
*
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2004 Freescale Semiconductor, Inc
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __MACH_MPC85XX_CDS_H__
#define __MACH_MPC85XX_CDS_H__
/* CADMUS info */
#define CADMUS_BASE (0xf8004000)
#define CADMUS_SIZE (256)
#define CM_VER (0)
#define CM_CSR (1)
#define CM_RST (2)
/* CDS NVRAM/RTC */
#define CDS_RTC_ADDR (0xf8000000)
#define CDS_RTC_SIZE (8 * 1024)
/* PCI interrupt controller */
#define PIRQ0A MPC85xx_IRQ_EXT0
#define PIRQ0B MPC85xx_IRQ_EXT1
#define PIRQ0C MPC85xx_IRQ_EXT2
#define PIRQ0D MPC85xx_IRQ_EXT3
#define PIRQ1A MPC85xx_IRQ_EXT11
#define NR_8259_INTS 16
#define CPM_IRQ_OFFSET NR_8259_INTS
#define MPC85xx_OPENPIC_IRQ_OFFSET 80
#endif /* __MACH_MPC85XX_CDS_H__ */
arch/powerpc/platforms/85xx/mpc85xx_ds.c
浏览文件 @ 8087ebd5
......@@ -24,7 +24,6 @@
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/mpc85xx.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/udbg.h>
......
arch/powerpc/platforms/85xx/mpc85xx_mds.c
浏览文件 @ 8087ebd5
......@@ -39,7 +39,6 @@
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/mpc85xx.h>
#include <asm/irq.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
......
include/asm-powerpc/cpm2.h
浏览文件 @ 8087ebd5
......@@ -13,6 +13,10 @@
#include <asm/immap_cpm2.h>
#include <asm/cpm.h>
#ifdef CONFIG_PPC_85xx
#define CPM_MAP_ADDR (get_immrbase() + 0x80000)
#endif
/* CPM Command register.
*/
#define CPM_CR_RST ((uint)0x80000000)
......
include/asm-powerpc/fs_pd.h
浏览文件 @ 8087ebd5
......@@ -19,8 +19,6 @@
#if defined(CONFIG_8260)
#include <asm/mpc8260.h>
#elif defined(CONFIG_85xx)
#include <asm/mpc85xx.h>
#endif
#define cpm2_map(member) (&cpm2_immr->member)
......
include/asm-powerpc/mpc85xx.h 已删除 100644 → 0
浏览文件 @ 895532a1
/*
* include/asm-powerpc/mpc85xx.h
*
* MPC85xx definitions
*
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2004 Freescale Semiconductor, Inc
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifdef __KERNEL__
#ifndef __ASM_MPC85xx_H__
#define __ASM_MPC85xx_H__
#include <asm/mmu.h>
#ifdef CONFIG_85xx
#if defined(CONFIG_MPC8540_ADS) || defined(CONFIG_MPC8560_ADS)
#include <platforms/85xx/mpc85xx_ads.h>
#endif
#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
#include <platforms/85xx/mpc8555_cds.h>
#endif
#ifdef CONFIG_MPC85xx_CDS
#include <platforms/85xx/mpc85xx_cds.h>
#endif
/* Let modules/drivers get at CCSRBAR */
extern phys_addr_t get_ccsrbar(void);
#ifdef MODULE
#define CCSRBAR get_ccsrbar()
#else
#define CCSRBAR BOARD_CCSRBAR
#endif
#endif /* CONFIG_85xx */
#endif /* __ASM_MPC85xx_H__ */
#endif /* __KERNEL__ */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或