提交 805b21b9 编写于 作者: D David Howells

rxrpc: Send an ACK after every few DATA packets we receive

Send an ACK if we haven't sent one for the last two packets we've received.
This keeps the other end apprised of where we've got to - which is
important if they're doing slow-start.

We do this in recvmsg so that we can dispatch a packet directly without the
need to wake up the background thread.

This should possibly be made configurable in future.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
上级 c6a77ff8
......@@ -533,6 +533,8 @@ struct rxrpc_call {
u16 ackr_skew; /* skew on packet being ACK'd */
rxrpc_serial_t ackr_serial; /* serial of packet being ACK'd */
rxrpc_seq_t ackr_prev_seq; /* previous sequence number received */
rxrpc_seq_t ackr_consumed; /* Highest packet shown consumed */
rxrpc_seq_t ackr_seen; /* Highest packet shown seen */
rxrpc_serial_t ackr_ping; /* Last ping sent */
ktime_t ackr_ping_time; /* Time last ping sent */
......@@ -695,6 +697,7 @@ enum rxrpc_propose_ack_trace {
rxrpc_propose_ack_respond_to_ack,
rxrpc_propose_ack_respond_to_ping,
rxrpc_propose_ack_retry_tx,
rxrpc_propose_ack_rotate_rx,
rxrpc_propose_ack_terminal_ack,
rxrpc_propose_ack__nr_trace
};
......
......@@ -202,6 +202,7 @@ const char rxrpc_propose_ack_traces[rxrpc_propose_ack__nr_trace][8] = {
[rxrpc_propose_ack_respond_to_ack] = "Rsp2Ack",
[rxrpc_propose_ack_respond_to_ping] = "Rsp2Png",
[rxrpc_propose_ack_retry_tx] = "RetryTx",
[rxrpc_propose_ack_rotate_rx] = "RxAck ",
[rxrpc_propose_ack_terminal_ack] = "ClTerm ",
};
......
......@@ -36,7 +36,9 @@ struct rxrpc_pkt_buffer {
* Fill out an ACK packet.
*/
static size_t rxrpc_fill_out_ack(struct rxrpc_call *call,
struct rxrpc_pkt_buffer *pkt)
struct rxrpc_pkt_buffer *pkt,
rxrpc_seq_t *_hard_ack,
rxrpc_seq_t *_top)
{
rxrpc_serial_t serial;
rxrpc_seq_t hard_ack, top, seq;
......@@ -48,6 +50,8 @@ static size_t rxrpc_fill_out_ack(struct rxrpc_call *call,
serial = call->ackr_serial;
hard_ack = READ_ONCE(call->rx_hard_ack);
top = smp_load_acquire(&call->rx_top);
*_hard_ack = hard_ack;
*_top = top;
pkt->ack.bufferSpace = htons(8);
pkt->ack.maxSkew = htons(call->ackr_skew);
......@@ -96,6 +100,7 @@ int rxrpc_send_call_packet(struct rxrpc_call *call, u8 type)
struct msghdr msg;
struct kvec iov[2];
rxrpc_serial_t serial;
rxrpc_seq_t hard_ack, top;
size_t len, n;
bool ping = false;
int ioc, ret;
......@@ -146,7 +151,7 @@ int rxrpc_send_call_packet(struct rxrpc_call *call, u8 type)
goto out;
}
ping = (call->ackr_reason == RXRPC_ACK_PING);
n = rxrpc_fill_out_ack(call, pkt);
n = rxrpc_fill_out_ack(call, pkt, &hard_ack, &top);
call->ackr_reason = 0;
spin_unlock_bh(&call->lock);
......@@ -203,18 +208,22 @@ int rxrpc_send_call_packet(struct rxrpc_call *call, u8 type)
if (ping)
call->ackr_ping_time = ktime_get_real();
if (ret < 0 && call->state < RXRPC_CALL_COMPLETE) {
switch (type) {
case RXRPC_PACKET_TYPE_ACK:
if (type == RXRPC_PACKET_TYPE_ACK &&
call->state < RXRPC_CALL_COMPLETE) {
if (ret < 0) {
clear_bit(RXRPC_CALL_PINGING, &call->flags);
rxrpc_propose_ACK(call, pkt->ack.reason,
ntohs(pkt->ack.maxSkew),
ntohl(pkt->ack.serial),
true, true,
rxrpc_propose_ack_retry_tx);
break;
case RXRPC_PACKET_TYPE_ABORT:
break;
} else {
spin_lock_bh(&call->lock);
if (after(hard_ack, call->ackr_consumed))
call->ackr_consumed = hard_ack;
if (after(top, call->ackr_seen))
call->ackr_seen = top;
spin_unlock_bh(&call->lock);
}
}
......
......@@ -201,8 +201,19 @@ static void rxrpc_rotate_rx_window(struct rxrpc_call *call)
_debug("%u,%u,%02x", hard_ack, top, flags);
trace_rxrpc_receive(call, rxrpc_receive_rotate, serial, hard_ack);
if (flags & RXRPC_LAST_PACKET)
if (flags & RXRPC_LAST_PACKET) {
rxrpc_end_rx_phase(call);
} else {
/* Check to see if there's an ACK that needs sending. */
if (after_eq(hard_ack, call->ackr_consumed + 2) ||
after_eq(top, call->ackr_seen + 2) ||
(hard_ack == top && after(hard_ack, call->ackr_consumed)))
rxrpc_propose_ACK(call, RXRPC_ACK_DELAY, 0, serial,
true, false,
rxrpc_propose_ack_rotate_rx);
if (call->ackr_reason)
rxrpc_send_call_packet(call, RXRPC_PACKET_TYPE_ACK);
}
}
/*
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册