Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 804c7812 编写于 作者: M Mauro Carvalho Chehab
浏览文件
操作

m5602_po1030: move skeletons to the .c file 

The header file has some private static structures that
are used only by the C file. Move those structures to the C file,
in order to shut up gcc 6.1 warnings.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
上级 1ab9e600
隐藏空白更改
内联 并排
Showing with 104 addition and 104 deletion
drivers/media/usb/gspca/m5602/m5602_po1030.c
浏览文件 @ 804c7812
......@@ -23,6 +23,110 @@
static int po1030_s_ctrl(struct v4l2_ctrl *ctrl);
static void po1030_dump_registers(struct sd *sd);
static const unsigned char preinit_po1030[][3] = {
{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02},
{SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
{BRIDGE, M5602_XB_GPIO_DAT, 0x00}
};
static const unsigned char init_po1030[][3] = {
{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
{SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)},
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
{SENSOR, PO1030_AUTOCTRL2, 0x04},
{SENSOR, PO1030_OUTFORMCTRL2, PO1030_RAW_RGB_BAYER},
{SENSOR, PO1030_AUTOCTRL1, PO1030_WEIGHT_WIN_2X},
{SENSOR, PO1030_CONTROL2, 0x03},
{SENSOR, 0x21, 0x90},
{SENSOR, PO1030_YTARGET, 0x60},
{SENSOR, 0x59, 0x13},
{SENSOR, PO1030_OUTFORMCTRL1, PO1030_HREF_ENABLE},
{SENSOR, PO1030_EDGE_ENH_OFF, 0x00},
{SENSOR, PO1030_EGA, 0x80},
{SENSOR, 0x78, 0x14},
{SENSOR, 0x6f, 0x01},
{SENSOR, PO1030_GLOBALGAINMAX, 0x14},
{SENSOR, PO1030_Cb_U_GAIN, 0x38},
{SENSOR, PO1030_Cr_V_GAIN, 0x38},
{SENSOR, PO1030_CONTROL1, PO1030_SHUTTER_MODE |
PO1030_AUTO_SUBSAMPLING |
PO1030_FRAME_EQUAL},
{SENSOR, PO1030_GC0, 0x10},
{SENSOR, PO1030_GC1, 0x20},
{SENSOR, PO1030_GC2, 0x40},
{SENSOR, PO1030_GC3, 0x60},
{SENSOR, PO1030_GC4, 0x80},
{SENSOR, PO1030_GC5, 0xa0},
{SENSOR, PO1030_GC6, 0xc0},
{SENSOR, PO1030_GC7, 0xff},
/* Set the width to 751 */
{SENSOR, PO1030_FRAMEWIDTH_H, 0x02},
{SENSOR, PO1030_FRAMEWIDTH_L, 0xef},
/* Set the height to 540 */
{SENSOR, PO1030_FRAMEHEIGHT_H, 0x02},
{SENSOR, PO1030_FRAMEHEIGHT_L, 0x1c},
/* Set the x window to 1 */
{SENSOR, PO1030_WINDOWX_H, 0x00},
{SENSOR, PO1030_WINDOWX_L, 0x01},
/* Set the y window to 1 */
{SENSOR, PO1030_WINDOWY_H, 0x00},
{SENSOR, PO1030_WINDOWY_L, 0x01},
/* with a very low lighted environment increase the exposure but
* decrease the FPS (Frame Per Second) */
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
};
static struct v4l2_pix_format po1030_modes[] = {
{
640,
......
drivers/media/usb/gspca/m5602/m5602_po1030.h
浏览文件 @ 804c7812
......@@ -167,108 +167,4 @@ static const struct m5602_sensor po1030 = {
.start = po1030_start,
.disconnect = po1030_disconnect,
};
static const unsigned char preinit_po1030[][3] = {
{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02},
{SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
{BRIDGE, M5602_XB_GPIO_DAT, 0x00}
};
static const unsigned char init_po1030[][3] = {
{BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
{BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
{BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
{SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)},
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
{SENSOR, PO1030_AUTOCTRL2, 0x04},
{SENSOR, PO1030_OUTFORMCTRL2, PO1030_RAW_RGB_BAYER},
{SENSOR, PO1030_AUTOCTRL1, PO1030_WEIGHT_WIN_2X},
{SENSOR, PO1030_CONTROL2, 0x03},
{SENSOR, 0x21, 0x90},
{SENSOR, PO1030_YTARGET, 0x60},
{SENSOR, 0x59, 0x13},
{SENSOR, PO1030_OUTFORMCTRL1, PO1030_HREF_ENABLE},
{SENSOR, PO1030_EDGE_ENH_OFF, 0x00},
{SENSOR, PO1030_EGA, 0x80},
{SENSOR, 0x78, 0x14},
{SENSOR, 0x6f, 0x01},
{SENSOR, PO1030_GLOBALGAINMAX, 0x14},
{SENSOR, PO1030_Cb_U_GAIN, 0x38},
{SENSOR, PO1030_Cr_V_GAIN, 0x38},
{SENSOR, PO1030_CONTROL1, PO1030_SHUTTER_MODE |
PO1030_AUTO_SUBSAMPLING |
PO1030_FRAME_EQUAL},
{SENSOR, PO1030_GC0, 0x10},
{SENSOR, PO1030_GC1, 0x20},
{SENSOR, PO1030_GC2, 0x40},
{SENSOR, PO1030_GC3, 0x60},
{SENSOR, PO1030_GC4, 0x80},
{SENSOR, PO1030_GC5, 0xa0},
{SENSOR, PO1030_GC6, 0xc0},
{SENSOR, PO1030_GC7, 0xff},
/* Set the width to 751 */
{SENSOR, PO1030_FRAMEWIDTH_H, 0x02},
{SENSOR, PO1030_FRAMEWIDTH_L, 0xef},
/* Set the height to 540 */
{SENSOR, PO1030_FRAMEHEIGHT_H, 0x02},
{SENSOR, PO1030_FRAMEHEIGHT_L, 0x1c},
/* Set the x window to 1 */
{SENSOR, PO1030_WINDOWX_H, 0x00},
{SENSOR, PO1030_WINDOWX_L, 0x01},
/* Set the y window to 1 */
{SENSOR, PO1030_WINDOWY_H, 0x00},
{SENSOR, PO1030_WINDOWY_L, 0x01},
/* with a very low lighted environment increase the exposure but
* decrease the FPS (Frame Per Second) */
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
{BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
};
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或