Merge tag 'staging-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO fixes from Greg KH:
 "Here are some staging and iio driver fixes for 4.4-rc2.  All of these
  are in response to issues that have been reported and have been in
  linux-next for a while"

* tag 'staging-4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Revert "Staging: wilc1000: coreconfigurator: Drop unneeded wrapper functions"
  iio: adc: xilinx: Fix VREFN scale
  iio: si7020: Swap data byte order
  iio: adc: vf610_adc: Fix division by zero error
  iio:ad7793: Fix ad7785 product ID
  iio: ad5064: Fix ad5629/ad5669 shift
  iio:ad5064: Make sure ad5064_i2c_write() returns 0 on success
  iio: lpc32xx_adc: fix warnings caused by enabling unprepared clock
  staging: iio: select IRQ_WORK for IIO_DUMMY_EVGEN
  vf610_adc: Fix internal temperature calculation

drivers/iio/adc/ad7793.c

@@ -101,7 +101,7 @@
 #define AD7795_CH_AIN1M_AIN1M	8 /* AIN1(-) - AIN1(-) */
 
 /* ID Register Bit Designations (AD7793_REG_ID) */
-#define AD7785_ID		0xB
+#define AD7785_ID		0x3
 #define AD7792_ID		0xA
 #define AD7793_ID		0xB
 #define AD7794_ID		0xF

drivers/iio/adc/vf610_adc.c

@@ -106,6 +106,13 @@
 
 #define DEFAULT_SAMPLE_TIME		1000
 
+/* V at 25°C of 696 mV */
+#define VF610_VTEMP25_3V0		950
+/* V at 25°C of 699 mV */
+#define VF610_VTEMP25_3V3		867
+/* Typical sensor slope coefficient at all temperatures */
+#define VF610_TEMP_SLOPE_COEFF		1840
+
 enum clk_sel {
 	VF610_ADCIOC_BUSCLK_SET,
 	VF610_ADCIOC_ALTCLK_SET,
@@ -197,6 +204,8 @@ static inline void vf610_adc_calculate_rates(struct vf610_adc *info)
 		adc_feature->clk_div = 8;
 	}
 
+	adck_rate = ipg_rate / adc_feature->clk_div;
+
 	/*
 	 * Determine the long sample time adder value to be used based
 	 * on the default minimum sample time provided.
@@ -221,7 +230,6 @@ static inline void vf610_adc_calculate_rates(struct vf610_adc *info)
 	 * BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode
 	 * LSTAdder(Long Sample Time): 3, 5, 7, 9, 13, 17, 21, 25 ADCK cycles
 	 */
-	adck_rate = ipg_rate / info->adc_feature.clk_div;
 	for (i = 0; i < ARRAY_SIZE(vf610_hw_avgs); i++)
 		info->sample_freq_avail[i] =
 			adck_rate / (6 + vf610_hw_avgs[i] *
@@ -663,11 +671,13 @@ static int vf610_read_raw(struct iio_dev *indio_dev,
 			break;
 		case IIO_TEMP:
 			/*
-			* Calculate in degree Celsius times 1000
-			* Using sensor slope of 1.84 mV/°C and
-			* V at 25°C of 696 mV
-			*/
-			*val = 25000 - ((int)info->value - 864) * 1000000 / 1840;
+			 * Calculate in degree Celsius times 1000
+			 * Using the typical sensor slope of 1.84 mV/°C
+			 * and VREFH_ADC at 3.3V, V at 25°C of 699 mV
+			 */
+			*val = 25000 - ((int)info->value - VF610_VTEMP25_3V3) *
+					1000000 / VF610_TEMP_SLOPE_COEFF;
+
 			break;
 		default:
 			mutex_unlock(&indio_dev->mlock);

drivers/iio/adc/xilinx-xadc-core.c

@@ -841,6 +841,7 @@ static int xadc_read_raw(struct iio_dev *indio_dev,
 			case XADC_REG_VCCINT:
 			case XADC_REG_VCCAUX:
 			case XADC_REG_VREFP:
+			case XADC_REG_VREFN:
 			case XADC_REG_VCCBRAM:
 			case XADC_REG_VCCPINT:
 			case XADC_REG_VCCPAUX:

drivers/iio/dac/ad5064.c

@@ -113,12 +113,16 @@ enum ad5064_type {
 	ID_AD5065,
 	ID_AD5628_1,
 	ID_AD5628_2,
+	ID_AD5629_1,
+	ID_AD5629_2,
 	ID_AD5648_1,
 	ID_AD5648_2,
 	ID_AD5666_1,
 	ID_AD5666_2,
 	ID_AD5668_1,
 	ID_AD5668_2,
+	ID_AD5669_1,
+	ID_AD5669_2,
 };
 
 static int ad5064_write(struct ad5064_state *st, unsigned int cmd,
@@ -291,7 +295,7 @@ static const struct iio_chan_spec_ext_info ad5064_ext_info[] = {
 	{ },
 };
 
-#define AD5064_CHANNEL(chan, addr, bits) {			\
+#define AD5064_CHANNEL(chan, addr, bits, _shift) {		\
 	.type = IIO_VOLTAGE,					\
 	.indexed = 1,						\
 	.output = 1,						\
@@ -303,36 +307,39 @@ static const struct iio_chan_spec_ext_info ad5064_ext_info[] = {
 		.sign = 'u',					\
 		.realbits = (bits),				\
 		.storagebits = 16,				\
-		.shift = 20 - bits,				\
+		.shift = (_shift),				\
 	},							\
 	.ext_info = ad5064_ext_info,				\
 }
 
-#define DECLARE_AD5064_CHANNELS(name, bits) \
+#define DECLARE_AD5064_CHANNELS(name, bits, shift) \
 const struct iio_chan_spec name[] = { \
-	AD5064_CHANNEL(0, 0, bits), \
-	AD5064_CHANNEL(1, 1, bits), \
-	AD5064_CHANNEL(2, 2, bits), \
-	AD5064_CHANNEL(3, 3, bits), \
-	AD5064_CHANNEL(4, 4, bits), \
-	AD5064_CHANNEL(5, 5, bits), \
-	AD5064_CHANNEL(6, 6, bits), \
-	AD5064_CHANNEL(7, 7, bits), \
+	AD5064_CHANNEL(0, 0, bits, shift), \
+	AD5064_CHANNEL(1, 1, bits, shift), \
+	AD5064_CHANNEL(2, 2, bits, shift), \
+	AD5064_CHANNEL(3, 3, bits, shift), \
+	AD5064_CHANNEL(4, 4, bits, shift), \
+	AD5064_CHANNEL(5, 5, bits, shift), \
+	AD5064_CHANNEL(6, 6, bits, shift), \
+	AD5064_CHANNEL(7, 7, bits, shift), \
 }
 
-#define DECLARE_AD5065_CHANNELS(name, bits) \
+#define DECLARE_AD5065_CHANNELS(name, bits, shift) \
 const struct iio_chan_spec name[] = { \
-	AD5064_CHANNEL(0, 0, bits), \
-	AD5064_CHANNEL(1, 3, bits), \
+	AD5064_CHANNEL(0, 0, bits, shift), \
+	AD5064_CHANNEL(1, 3, bits, shift), \
 }
 
-static DECLARE_AD5064_CHANNELS(ad5024_channels, 12);
-static DECLARE_AD5064_CHANNELS(ad5044_channels, 14);
-static DECLARE_AD5064_CHANNELS(ad5064_channels, 16);
+static DECLARE_AD5064_CHANNELS(ad5024_channels, 12, 8);
+static DECLARE_AD5064_CHANNELS(ad5044_channels, 14, 6);
+static DECLARE_AD5064_CHANNELS(ad5064_channels, 16, 4);
 
-static DECLARE_AD5065_CHANNELS(ad5025_channels, 12);
-static DECLARE_AD5065_CHANNELS(ad5045_channels, 14);
-static DECLARE_AD5065_CHANNELS(ad5065_channels, 16);
+static DECLARE_AD5065_CHANNELS(ad5025_channels, 12, 8);
+static DECLARE_AD5065_CHANNELS(ad5045_channels, 14, 6);
+static DECLARE_AD5065_CHANNELS(ad5065_channels, 16, 4);
+
+static DECLARE_AD5064_CHANNELS(ad5629_channels, 12, 4);
+static DECLARE_AD5064_CHANNELS(ad5669_channels, 16, 0);
 
 static const struct ad5064_chip_info ad5064_chip_info_tbl[] = {
 	[ID_AD5024] = {
@@ -382,6 +389,18 @@ static const struct ad5064_chip_info ad5064_chip_info_tbl[] = {
 		.channels = ad5024_channels,
 		.num_channels = 8,
 	},
+	[ID_AD5629_1] = {
+		.shared_vref = true,
+		.internal_vref = 2500000,
+		.channels = ad5629_channels,
+		.num_channels = 8,
+	},
+	[ID_AD5629_2] = {
+		.shared_vref = true,
+		.internal_vref = 5000000,
+		.channels = ad5629_channels,
+		.num_channels = 8,
+	},
 	[ID_AD5648_1] = {
 		.shared_vref = true,
 		.internal_vref = 2500000,
@@ -418,6 +437,18 @@ static const struct ad5064_chip_info ad5064_chip_info_tbl[] = {
 		.channels = ad5064_channels,
 		.num_channels = 8,
 	},
+	[ID_AD5669_1] = {
+		.shared_vref = true,
+		.internal_vref = 2500000,
+		.channels = ad5669_channels,
+		.num_channels = 8,
+	},
+	[ID_AD5669_2] = {
+		.shared_vref = true,
+		.internal_vref = 5000000,
+		.channels = ad5669_channels,
+		.num_channels = 8,
+	},
 };
 
 static inline unsigned int ad5064_num_vref(struct ad5064_state *st)
@@ -597,10 +628,16 @@ static int ad5064_i2c_write(struct ad5064_state *st, unsigned int cmd,
 	unsigned int addr, unsigned int val)
 {
 	struct i2c_client *i2c = to_i2c_client(st->dev);
+	int ret;
 
 	st->data.i2c[0] = (cmd << 4) | addr;
 	put_unaligned_be16(val, &st->data.i2c[1]);
-	return i2c_master_send(i2c, st->data.i2c, 3);
+
+	ret = i2c_master_send(i2c, st->data.i2c, 3);
+	if (ret < 0)
+		return ret;
+
+	return 0;
 }
 
 static int ad5064_i2c_probe(struct i2c_client *i2c,
@@ -616,12 +653,12 @@ static int ad5064_i2c_remove(struct i2c_client *i2c)
 }
 
 static const struct i2c_device_id ad5064_i2c_ids[] = {
-	{"ad5629-1", ID_AD5628_1},
-	{"ad5629-2", ID_AD5628_2},
-	{"ad5629-3", ID_AD5628_2}, /* similar enough to ad5629-2 */
-	{"ad5669-1", ID_AD5668_1},
-	{"ad5669-2", ID_AD5668_2},
-	{"ad5669-3", ID_AD5668_2}, /* similar enough to ad5669-2 */
+	{"ad5629-1", ID_AD5629_1},
+	{"ad5629-2", ID_AD5629_2},
+	{"ad5629-3", ID_AD5629_2}, /* similar enough to ad5629-2 */
+	{"ad5669-1", ID_AD5669_1},
+	{"ad5669-2", ID_AD5669_2},
+	{"ad5669-3", ID_AD5669_2}, /* similar enough to ad5669-2 */
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, ad5064_i2c_ids);

drivers/iio/humidity/si7020.c

@@ -50,10 +50,10 @@ static int si7020_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		ret = i2c_smbus_read_word_data(*client,
-					       chan->type == IIO_TEMP ?
-					       SI7020CMD_TEMP_HOLD :
-					       SI7020CMD_RH_HOLD);
+		ret = i2c_smbus_read_word_swapped(*client,
+						  chan->type == IIO_TEMP ?
+						  SI7020CMD_TEMP_HOLD :
+						  SI7020CMD_RH_HOLD);
 		if (ret < 0)
 			return ret;
 		*val = ret >> 2;

drivers/staging/iio/Kconfig

@@ -18,7 +18,8 @@ source "drivers/staging/iio/resolver/Kconfig"
 source "drivers/staging/iio/trigger/Kconfig"
 
 config IIO_DUMMY_EVGEN
-       tristate
+	tristate
+	select IRQ_WORK
 
 config IIO_SIMPLE_DUMMY
        tristate "An example driver with no hardware requirements"

drivers/staging/iio/adc/lpc32xx_adc.c

@@ -76,7 +76,7 @@ static int lpc32xx_read_raw(struct iio_dev *indio_dev,
 
 	if (mask == IIO_CHAN_INFO_RAW) {
 		mutex_lock(&indio_dev->mlock);
-		clk_enable(info->clk);
+		clk_prepare_enable(info->clk);
 		/* Measurement setup */
 		__raw_writel(AD_INTERNAL | (chan->address) | AD_REFp | AD_REFm,
 			     LPC32XX_ADC_SELECT(info->adc_base));
@@ -84,7 +84,7 @@ static int lpc32xx_read_raw(struct iio_dev *indio_dev,
 		__raw_writel(AD_PDN_CTRL | AD_STROBE,
 			     LPC32XX_ADC_CTRL(info->adc_base));
 		wait_for_completion(&info->completion); /* set by ISR */
-		clk_disable(info->clk);
+		clk_disable_unprepare(info->clk);
 		*val = info->value;
 		mutex_unlock(&indio_dev->mlock);
 

drivers/staging/wilc1000/coreconfigurator.c

@@ -13,12 +13,8 @@
 #include "wilc_wlan.h"
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <linux/etherdevice.h>
 #define TAG_PARAM_OFFSET	(MAC_HDR_LEN + TIME_STAMP_LEN + \
 							BEACON_INTERVAL_LEN + CAP_INFO_LEN)
-#define ADDR1 4
-#define ADDR2 10
-#define ADDR3 16
 
 /* Basic Frame Type Codes (2-bit) */
 enum basic_frame_type {
@@ -175,32 +171,38 @@ static inline u8 get_from_ds(u8 *header)
 	return ((header[1] & 0x02) >> 1);
 }
 
+/* This function extracts the MAC Address in 'address1' field of the MAC     */
+/* header and updates the MAC Address in the allocated 'addr' variable.      */
+static inline void get_address1(u8 *pu8msa, u8 *addr)
+{
+	memcpy(addr, pu8msa + 4, 6);
+}
+
+/* This function extracts the MAC Address in 'address2' field of the MAC     */
+/* header and updates the MAC Address in the allocated 'addr' variable.      */
+static inline void get_address2(u8 *pu8msa, u8 *addr)
+{
+	memcpy(addr, pu8msa + 10, 6);
+}
+
+/* This function extracts the MAC Address in 'address3' field of the MAC     */
+/* header and updates the MAC Address in the allocated 'addr' variable.      */
+static inline void get_address3(u8 *pu8msa, u8 *addr)
+{
+	memcpy(addr, pu8msa + 16, 6);
+}
+
 /* This function extracts the BSSID from the incoming WLAN packet based on   */
-/* the 'from ds' bit, and updates the MAC Address in the allocated 'data'    */
+/* the 'from ds' bit, and updates the MAC Address in the allocated 'addr'    */
 /* variable.                                                                 */
 static inline void get_BSSID(u8 *data, u8 *bssid)
 {
 	if (get_from_ds(data) == 1)
-		/*
-		 * Extract the MAC Address in 'address2' field of the MAC
-		 * header and update the MAC Address in the allocated 'data'
-		 *  variable.
-		 */
-		ether_addr_copy(data, bssid + ADDR2);
+		get_address2(data, bssid);
 	else if (get_to_ds(data) == 1)
-		/*
-		 * Extract the MAC Address in 'address1' field of the MAC
-		 * header and update the MAC Address in the allocated 'data'
-		 * variable.
-		 */
-		ether_addr_copy(data, bssid + ADDR1);
+		get_address1(data, bssid);
 	else
-		/*
-		 * Extract the MAC Address in 'address3' field of the MAC
-		 * header and update the MAC Address in the allocated 'data'
-		 * variable.
-		 */
-		ether_addr_copy(data, bssid + ADDR3);
+		get_address3(data, bssid);
 }
 
 /* This function extracts the SSID from a beacon/probe response frame        */