ARM: ux500: add support for clocksource DBX500 PRCMU

This patch adds support for the DBX500 PRCMU clocksource
to ux500 platforms.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.co>
Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

arch/arm/mach-ux500/cpu.c

@@ -10,6 +10,7 @@
 #include <linux/clk.h>
 #include <linux/mfd/db8500-prcmu.h>
 #include <linux/mfd/db5500-prcmu.h>
+#include <linux/clksrc-dbx500-prcmu.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -140,7 +141,15 @@ static void __init ux500_timer_init(void)
 	else
 		ux500_unknown_soc();
 
+	if (cpu_is_u8500())
+		clksrc_dbx500_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
+	else if (cpu_is_u5500())
+		clksrc_dbx500_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE);
+	else
+		ux500_unknown_soc();
+
 	nmdk_timer_init();
+	clksrc_dbx500_prcmu_init();
 }
 
 struct sys_timer ux500_timer = {

arch/arm/mach-ux500/include/mach/db5500-regs.h

@@ -61,6 +61,8 @@
 #define U5500_SCR_BASE		(U5500_PER4_BASE + 0x5000)
 #define U5500_DMC_BASE		(U5500_PER4_BASE + 0x6000)
 #define U5500_PRCMU_BASE	(U5500_PER4_BASE + 0x7000)
+#define U5500_PRCMU_TIMER_3_BASE (U5500_PER4_BASE + 0x07338)
+#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450)
 #define U5500_MSP1_BASE		(U5500_PER4_BASE + 0x9000)
 #define U5500_GPIO2_BASE	(U5500_PER4_BASE + 0xA000)
 #define U5500_CDETECT_BASE	(U5500_PER4_BASE + 0xF000)

arch/arm/mach-ux500/include/mach/db8500-regs.h

@@ -102,10 +102,13 @@
 #define U8500_SCR_BASE		(U8500_PER4_BASE + 0x05000)
 #define U8500_DMC_BASE		(U8500_PER4_BASE + 0x06000)
 #define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x07000)
+#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
+#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
 #define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000)
 #define U8500_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x68000)
 #define U8500_PRCMU_TCPM_BASE   (U8500_PER4_BASE + 0x60000)
 
+
 /* per3 base addresses */
 #define U8500_FSMC_BASE		(U8500_PER3_BASE + 0x0000)
 #define U8500_SSP0_BASE		(U8500_PER3_BASE + 0x2000)