提交 7cc24e12 编写于 作者: V Valentina Manea 提交者: Bjorn Helgaas

x86/pci/mrst: Cleanup checkpatch.pl warnings

This patch fixes warning and errors found by checkpatch.pl:

* replace asm/acpi.h, asm/io.h and asm/smp.h with linux/acpi.h,
linux/io.h and linux/smp.h respectively
* remove explicit initialization to 0 of a static global variable
* replace printk(KERN_INFO ...) with pr_info
* use tabs instead of spaces for indentation
* arrange comments so that they adhere to Documentation/CodingStyle

[bhelgaas: capitalize "PCI", "Langwell", "Lincroft" consistently]
Signed-off-by: NValentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
上级 d47af0bc
......@@ -23,11 +23,11 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/dmi.h>
#include <linux/acpi.h>
#include <linux/io.h>
#include <linux/smp.h>
#include <asm/acpi.h>
#include <asm/segment.h>
#include <asm/io.h>
#include <asm/smp.h>
#include <asm/pci_x86.h>
#include <asm/hw_irq.h>
#include <asm/io_apic.h>
......@@ -43,7 +43,7 @@
#define PCI_FIXED_BAR_4_SIZE 0x14
#define PCI_FIXED_BAR_5_SIZE 0x1c
static int pci_soc_mode = 0;
static int pci_soc_mode;
/**
* fixed_bar_cap - return the offset of the fixed BAR cap if found
......@@ -141,7 +141,8 @@ static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
*/
static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
{
/* This is a workaround for A0 LNC bug where PCI status register does
/*
* This is a workaround for A0 LNC bug where PCI status register does
* not have new CAP bit set. can not be written by SW either.
*
* PCI header type in real LNC indicates a single function device, this
......@@ -154,7 +155,7 @@ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
|| devfn == PCI_DEVFN(0, 0)
|| devfn == PCI_DEVFN(3, 0)))
return 1;
return 0; /* langwell on others */
return 0; /* Langwell on others */
}
static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
......@@ -172,7 +173,8 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
{
int offset;
/* On MRST, there is no PCI ROM BAR, this will cause a subsequent read
/*
* On MRST, there is no PCI ROM BAR, this will cause a subsequent read
* to ROM BAR return 0 then being ignored.
*/
if (where == PCI_ROM_ADDRESS)
......@@ -210,7 +212,8 @@ static int mrst_pci_irq_enable(struct pci_dev *dev)
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
/* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
/*
* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
* IOAPIC RTE entries, so we just enable RTE for the device.
*/
irq_attr.ioapic = mp_find_ioapic(dev->irq);
......@@ -235,7 +238,7 @@ struct pci_ops pci_mrst_ops = {
*/
int __init pci_mrst_init(void)
{
printk(KERN_INFO "Intel MID platform detected, using MID PCI ops\n");
pr_info("Intel MID platform detected, using MID PCI ops\n");
pci_mmcfg_late_init();
pcibios_enable_irq = mrst_pci_irq_enable;
pci_root_ops = pci_mrst_ops;
......@@ -244,17 +247,21 @@ int __init pci_mrst_init(void)
return 1;
}
/* Langwell devices are not true pci devices, they are not subject to 10 ms
* d3 to d0 delay required by pci spec.
/*
* Langwell devices are not true PCI devices; they are not subject to 10 ms
* d3 to d0 delay required by PCI spec.
*/
static void pci_d3delay_fixup(struct pci_dev *dev)
{
/* PCI fixups are effectively decided compile time. If we have a dual
SoC/non-SoC kernel we don't want to mangle d3 on non SoC devices */
if (!pci_soc_mode)
return;
/* true pci devices in lincroft should allow type 1 access, the rest
* are langwell fake pci devices.
/*
* PCI fixups are effectively decided compile time. If we have a dual
* SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices.
*/
if (!pci_soc_mode)
return;
/*
* True PCI devices in Lincroft should allow type 1 access, the rest
* are Langwell fake PCI devices.
*/
if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
return;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册